HOL-SDC-1303 Module 2 - Interfaces disappears on distributed router (edge-2)

Similar Questions

• Username and password not working not not in HOL-SDC-1303

  For HOL-SDC-1303 the name of user and password are given as

  • User name: Corp\Administrator
  • Password: VMware1!

  but when I get home I have to receive the message that the credentials are not valid. Can you help me?

  Corp\Administrator is the ControlCenter Windows.

  Please use the root and VMware1! to connect in vCenter.

  Thank you.

  Bill

• HOL-SDC-1303 - VMware NSX - unable to connect to the Service research

  Hello

  I can not connect to the HOL-SDC-1303 - VMware NSX. It reports: unable to connect to the Service research.

  Anyone else having this problem?

  Gabrié

  Gabrié

  This could be a case of the vPOD not 'hot' or fully loaded, is there a chance you can try to run the lab, once the console is in place, may have to wait a few minutes (coffee break) and try again...

  I'll go ahead and run the lab to see if I feel the same way...

  Concerning

  Pablo

• HOL-SDC-1303 - 86 - no uplink transit drop interface step-down

  Hello

  I seem to be stuck on 86 step, as the drop to the INterface is empty.

  I went back over my previous steps, and all seem to be complete.

  I also published the changes between each step and still no joy.

  Any advice?

  Thank you!

  Keith

  It could be a problem with the plugin from web client.

  Please try to close the web browser and then restart, log on and come back where you need the OSPF Interfaces.

  I saw him work and I saw this question.

  Thank you for your patience.

  Bill

• HOL-SDC-1303 mod 2 - pg 71 cannot create interfaces, need help - vShield error-

  See screenshot of error. It happens every time. Ditto for DB_Logical_Network. -Stew

  

  Hmm, I have just crossed Module 2 and was able to successfully complete the part without seeing the error. It is possible that you had a deployment vitiated from the pod, although I can't imagine that would have led to this specific error. Sometimes, if the car is running too long, the file system fills with marbles and maybe that caused the directory noted as not available (no space)?

  If you try again, you can jump right to the Module 2 by using the Table of contents in the manual.

  Please let me know if you still see the question.

  -Doug

• The NSX HOL-SDC-1303 network virtualization

  In the Web Client, network & security, logical switches gives an error.

  Cannot navigate to the desired location.

  Therefore, I can't go forward with the lab.

  Please notify.

  Thank you.

  Please try to close and restart the web client in the laboratory.  (not your local browser but that inside the VM console)

  Thank you.

  Bill

• Laboratory: HOL-SDC-1603 VMware NSX Introduction - no interface on-board

  I'm a newbie to NSX and just start playing with online labs.

  I'm running: Lab: HOL - SDC - 1603 VMware NSX Introduction but to step 25 I have a problem

  Laboratory guide implies that there should be an Interface of edge available to select from but my lab console shows any of these options

  Ideas appreciated?

  Can you try to refresh the Web Client browser? This will allow generally the object appears.

• HOL-SDC-1610 Incorrect Credentials for vRealize Operations Manager

  In the laboratory HOL-SDC-1610, during step 55 module, when you are prompted to enter the user credentials in the web client for vRealize Operations Manager, credentials given instructions not to allow access:

  Authentication source: local users

  User name: admin

  Password VMware1

  

  The credentials must be admin / VMware1!

  Please give that a try. Was he in the lab manual or the README.txt file where you found the password for this?

• HOL-SDC-1314 - vCloud Suite Use Cases - application implementation service (PaaS) is broken to step 26

  See error - ideas?

  

  I think that you have been given a laboratory 'cold', which is an environment that wasn't quite ready when you started your laboratory.  I noticed that we had some mistakes on the back-end deploy this lab recently.  I deleted these errors and a few extra copies made so I hope that the next time you try the lab you will get an environment that has completed all the boot process and is ready to go for you.

  BTW, on the desktop, there is a "tattoo" that indicates if the laboratory is ready or not.  When I started my HOL-SDC-1314 just now, I noticed that my office has indicated that he was not quite ready.  This workshop takes about 15 minutes to start from a cold start.

  Please take HOL-SDC-1314 again and I think you will find that this error will disappear.

  Thank you for your participation.

  Bill

• NSX Labs virtual keyboard COmmnads for HOL-SDC-1603

  All the world tried this lab and used the "Readme.txt" recommended on the desktop for lab scripts?

  The file that I see on the desktop appears only to have connections for different environments, not commands/scripts.

  For now I manually type the required data.

  Thank you, Dickie

  I noted, however, that the manual for HOL-SDC-1603 indicates that orders are available in the README file. TXT file.

  It is incorrect and these statements should be removed from employment. Thanks for reporting this.

  -Doug

• HOL-SDC-1430 bug?

  On step 42, get a "error FATA [0001] TLS Handshake: remote error: incorrect certificate ' error. Tried to restart the laboratory with a clean environment and spin in the same question. Any help would be appreciated!

  

  The manual for HOL-SDC-1430 has been updated with this change.

  -Doug

• Bug of HOL-SDC-1430

  Hello

  I just wanted to report a problem with HOL-SDC-1430. On Page 69 it SAIS to start the vRO customer. Howerver, I guess that the vRO service is not started on the vRA VM that is used in the example, so I can't connect to the vRO / customer downloaded.

  I guess a simple chkconfig--level 35 vco-Configurator on in the vRA would do the job, but I was unable to connect to vRA on port 22 for verification.

  I have looked into this issue more and discovered that vRealize as orchestrator was not properly authorized.  Good evaluation license that expired was beyond the initial period of 90 and so it would not start automatically.  Although I could get it to start manually, the best solution is to allow vRO correctly using vCenter Server license.  Once done, the server of vRO started very well.

  While I was making changes in the laboratory, I also activated the vRO Configuration service and add a link in Firefox in the folder of bookmarks to the Admin.  In this way, if the vRO server can fail for any reason, you can get pretty easily it goes again in the laboratory.

  I also added a SSH access for root to vra - 01 a .corp .local and vra - id - 01 a .corp .local. It's just in case the identity unit must be restarted or the vRO Configuration service is not available.

  Please start the lab.

  Thank you!

  Bill

• Cannot find lab HOL-SDC-1314 - vCloud Suite Use Cases - application implementation service (PaaS) - use of vFabric

  Hello

  I see in some references of documents to this laboratory HOL-SDC-1314 - vCloud Suite Use Cases - updated application in service (PaaS) - use of vFabric

  However I find it.

  I also tried to change the link to: http://labs.hol.VMware.com/hol/console/lab/hol-SDC-1414-hol

  and 1514. Always without success.

  What, please, can you

  How can I find these old Labs?

  Best regards Daniel

  Hi Daniel,.

  We do not keep the old versions in the HOL given the constraints of storage cloud. The current catalog HOL approximately 30 TB of storage and we have recently taken out of service about 20 TB of old pods in order to manage the development and preparation of new laboratories for the exchange of partner and VMworld 2015. You may be able to find the old pod, or something similar in one of the other clouds internal. I suggest you look in the catalogs of sandbox to see if something might meet your needs if HOL-SDC-1421 does not provide what you need.

  All the manuals we have available can be downloaded in PDF format from the website of HOL Docs: docs.hol.vmware.com/catalog

  There is a product search option. Unfortunately, we have more manuals before 2014 available here.

  -Doug

  http://docs.hol.VMware.com/catalog

• My module 'Library' suddenly disappeared and I cannot access my images. How can I find my files if there is no button 'library '?

  My module 'Library' suddenly disappeared and I cannot access my images. How can I find my files if there is no button 'library '?

  You have just inadvertently hidden.

  Modules and billboards / masking is a little known feature of Lightroom, which seems to put the fear of God into unsuspecting newbies who are not aware of the feature.

  Right-click (CTRL click on Mac) on the Module names and restore the checkmark to the library.

• The main module controls develop disappeared from the window to develop.  How can I get back them?

  The main module controls develop disappeared from the window to develop.  How can I get back them?  I work with Lightroom 5.3.  The missing controls are the sliders for exposure, clarity, contrast, etc.  I must have inadvertently clicked on something that made them disappear, but nothing I tried back them.  I've never had this experience over the years that I've been using Lightroom (since version 1.1).

  Right-click on any other element curve tone e.g., and tick on 'Basic' if that is what you are missing.

  If you miss the right click the full module to develop any other point Library for ex and put a check mark on develop