Home Server remote support

Similar Questions

• Windows Home Server 2011 Support Lifecycle issue

  I am currently using WHS 2011 and wanted to know when they cease to issue some and and all the patches/updates for the operating system. I ask because after reading this page , it says 'not applicable' under "Extended Support".

  I've never used any MS product up to the end of its support of the cycle and after reading this page, it seems oddly short a cycle of support for Member States. If someone can give me a definitive answer, I would be grateful.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

  PS This can help.

  http://itcomposer.com/ITC/Microsoft-product-support-lifecycle/

• Windows home server 2011 - remote access error - wrong password or account to GoDaddy

  My windows Home server remote access does not recognize the domain, I've implemented into Go Daddy.

  The login and the password are considered bad by the wizard.

  Of course I can access with login and password to godaddy.com and everything is nominal.

  I noticed the problem 4 weeks ago. No solution has worked so far.

  I tried even to remove the entry in the register (via REGEDIT), I found a link to that in the past. But the problem remains.

  I fear that some change was introduced on the way the security part

  Hello

  I suggest you post your query on the TechNet forums to get help. Consult the following link:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/ba0d1c89-ad59-414a-bf00-d3085a9f25d9/Windows-Home-Server-2011?Forum

  It will be useful.

• Windows Home Server 11

  Hello

  As I read about the details of Windows Home Server, I found that it is used for the sharing of data (documents, music, movies, etc.) with your home network.

  I would like to understand in detail (but simple language please) how it is diff from LAN (network working group) of normal file sharing, we create to share data/files diff between diff windows pc in our Home/office

  wishes

  Hello

  Windows Home Server is supported in this Microsoft forum:

  http://social.microsoft.com/Forums/en-US/home?category=WindowsHomeServer .

  The people can be better placed to answer your question.

• Xbox on Windows RT music does not all photos in my Home Server Library

  I have about 1 500 CD, torn from the \\homeserver\Music on my Windows Home Server part. The CDs are extracted using the standard - names naming convention and are stored in WMA Lossless format. When I use other music programs (Squeezebox, J.River, Zune, Xbox Music on PC Intel) to analyze my music library, they find all the CD. However, in music of Xbox on Windows RT (I use the RT Surface of first generation 32 GB) is (900 or almost), but not all CD in my music library. Is it possible to force the Xbox Music to re-scan my music library?

  Thanks in advance for any help or advice!

  Hi Odin,

  Problems with Windows Home Server are supported in the TechNet Forums. I suggest you send the request in the TechNet Forums.

  http://social.technet.Microsoft.com/wiki/contents/articles/4287.media-streaming-known-issue-and-workaround-with-Windows-Home-Server-2011-and-Windows-Storage-Server-2008-R2-essentials.aspx

  Hope this information helps.

• How can I have my client Win8 continue to be supported by Windows Home Server v1?

  I've updated from Windows 7 to Windows 8, and now my Windows Home Server v1 cannot back up my laptop. The connector software complains about volume errors and complains about the ESM may not take a snapshot of the customer volume. Help, please!

  None of the two versions of Windows Home Server can back up systems of Windows 8. The first version of WHS is no longer supported and probably will not be updated to add this support.  Windows Home Server 2011 can be updated, the last word of Microsoft on this subject was "Stay Tuned!"

  If you want a definitive answer, post it in the Windows Home Server support forums.

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

• Windows Home Server 2011 - key invalid product no

  Hello. When you try to enter my product key in my Windows Home Server from a remote computer, I get an error saying that my product key is not valid. When I was troubleshooting and tried to install it on another computer the product key worked very well. I was wondering if someone can help me?

  WHS2011 running on a HP EX475 - 2 GB of ram, 64-bit processor

  Hi Gavin,

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Home Server 2011 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winserver8gen/threads

  Thank you.

• Windows 7 Ultimate to Home Server 2011 connection issues

  I tried eight weeks set up Windows Home Server. Long story, but I had to put him in place and then when I went to try to use remote access, I found that Windows 7 Home Premium has not supported remote access. So I've upgraded to Windows 7 Ultimate (W7 U). Then I could not connect the W7 U computer to the server. 4 other computers running Windows 7 Home Premium (HP) have been able to access the server, backup etc.

  So I decided to re install WHS. All computers HP W7 has successfully connected but not my W7 Ultimate computer. I read all the forums I can find but nothing I've tried has fixed the problem.
  When I try to use the connection software I've reached a point where I get the following error message:
  Connect a computer to the network
  This computer can't connect to the network
  An unexpected error has occurred. For more information, see Troubleshooting computers connect to the server.
  When I open Explorer windows on the computer U W7 I see Home Server in the homegroup and my other computers. I can see the shared folders in Home Server, but when I click it I am asked 'enter network password' it does not matter what I enter I get "the specified network password is not correct" I tried
  1. my username and password to connect to the computer of U w7
  2 ID created in the ESM (that I can use it on any other computers)
  3. even tried the password used to connect to the server.
  Server appears with other computers under 'Network', but I have the same problem.
  When I go to the server I can see my U w7 homegroup and network computer and can access shared files. Same situation with any of the other computers in the homegroup. Everyone can see and access the computer of W7 U.
  I tried almost all suggestions with success. Any help would be greatly appreciated.

  Please post this question to the appropriate instance of the Microsoft Windows Home Server to help...

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

• Windows Home Server Connector

  I can connect to one of my computers, but not another. They can see each other. I can connect to my other computer as WHS although I can also connect remotely.

  I disabled my firewall, but it has not solved the problem. Any other suggestions?
  Hi Tigermag,
   
  The question you have posted is related to Windows home server and Windows home server Forum would be better suited. Please visit the below mentioned link to find a community that will provide the support that you have requested.
   
  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/
   
  Hope the link helps you solve the problem. You can always write back to us and we will be happy to help you more

• Windows Home Server 2011 complete system restore problem = cannot start the LAN adapter

  Home built PC

  Card mother Gigabyte GA-Z77MX-D3H

  Network adapter Atheros AR8151 PCI-E on the map connected to the LAN Cat6

  Windows Pro 10

  Windows Home Server 2011 on LAN

  I had a hard drive failure partial who gave no symptoms or errors except a VERY slow start-up and operation.  I tried to do a restore of the entire system of my Home Server 2011 backups to see if, perhaps, just the image was corrupt.  USB was created and all drivers copied from pilots for the full system restore folder.  Has started the full restoration of the system and loaded the missing NETWORK adapter driver by using the scanner for drivers.  Driver support was successful but no lights NIC and the message "cannot find server".  NETWORK card was working fine before, even with the bad hard drive and also after the abandonment of the restoration.  Installed the new drive hard C:-System and that was the main problem, BUT..., the later to restore attempt was always the NIC starts not problem.  Tried the driver directly at Gigabyte support and drivers drivers for the full restoration of the system of records from several different backups.  No love.  Just NIC does not start after the specified load successful pilot.

  All good advice?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• 0xc000000e - Windows Home Server 2011 - how to open the repair or the command line option

  Hello

  I currently have the problem that my Windows Home Server 2011 stops booting with the 0xc000000e error code.

  Of course, I searched the web and found the following article:

  https://support.Microsoft.com/en-us/KB/2261423

  Can I boot from my installation DVD. "Windows loading files.

  While two options:

  -new installation

  -repair

  I click on repair. The next screen prompts to choose a restore image. ???? No other options or possibilities. No command line, nothing.

  OK boot with F8. Start menu. No repair option. Only "safe mode with cmd. Tried this. Then download the same GUI as before. Same two options. No CMD and taxation not possibility to use STARTREP. EXE.

  Any suggestions?

  Thanks in advance.

  Alexander

  Hello

  Your question is beyond the scope of this community.

  Repost in Windows Home Server Forums.

  https://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer

  See you soon.

• We need a replacement for Windows Home Server that does not cost $700

  We need a replacement for windows home server that does not cost as much as a PC. 2011 is not really available and 2008 has compatibility problems, because it is based on XP and Server 2003. None of the motherboard manufactures will support XP (thanks to MS) and more recent SATA drives do not work in my motherboard more old.

  Perry

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Cannot partition on Windows Home Server

  The problem:
  We are currently the main C drive partitioned 20 GB and we cannot repartition try with several different partition tools.  The error via a tool, it's "the volume you have selected cannot be extended.  Other tools to give similar messages.  The hard drive is 250 GB RAID 1 mirror.

  What we tried:

  A suggestion according to the https://support.microsoft.com/en-us/kb/841650 does not include the home server edition so can't take the risk that she clearly serve States own risk.  We tried Acronis partition software, G-Parted, diskpart.exe command BACK and Macrorit http://macrorit.com/partition-magic-manager/server-diskpart-fails-to-extend-system-partition.html

  Other suspicious Info:

  1. System Properties window says that the operating system is 'Windows Home Server'.

  2 window Information System indicates that the operating system is 'Windows 2003 Small Business Server. "

  The person who owns that server call purchase Home Server edition.  Not sure if this is related or not, but it's conflicting information to find a solution.

  Bottom line, even if that server is outdated and not fully supported any longer, we hope to keep alive a little more long if possible if we simply repartition C drive and increase the free space.  Other than replacing the server suggestions are appreciated because they are not willing to spend the money to replace the entire server.

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Driver Realtek NIC missing after the previous Windows Update on window Home Server 2011

  During the last windows update, I lost the Realtek NIC driver on windows home server 2011. If you do not have the backup, is the only way rebuild machine or there is another way to install the driver software.

  Hello

  Since the problem is specific to the window Home Server 2011, I suggest that the validation of the query on the forum link mentioned here.

  http://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer

  They are a team of dedicated support, helping issues related to servers in the window of the House.

  Hope the information is useful.

• Windows Home Server disk failure

  Excuse the language, but I'm bricks now. I have aHP Ex470 with a volume of system of 500 Gig and two 500 gig drives. I have a seemed all our data are spread over two discs, but I can't be sure. Duplication is enabled.

  He acted a bit strange in recent weeks and now, after a reboot, it just flashes red on the status indicator and it does not start. I also hear a worrying thud. I removed the two storage drives , then it starts, with some caveats of course. I could start with one of the installed disks but not the other.

  I guess one of the disks is scrap. but the data should not always be safe? When I look at inte console under shared folders, it says on most of them that they're fails. In addition, some open but others, files in the ajecent folder, does not open because the program does not recognize the file format, even if it's the appropriate icon. And what should be my next move? I got a disc of 2 gigabytes, I intend to chuck in, if I do, will the system and data be safe? I know when the disc has not shown the other day, could not open some of the files, so as you probably understand, I am really worried now...

  Hi HarveyWallbanger,

  When you use Windows Server and the question you have posted is related to Windows Home Server, where it would be better suited to the Windows Home Server community. Please visit the link below to find a community that will provide the best support.

  http://social.Microsoft.com/forums/en-us/whshardware/threads

  I hope this helps.