Home Server

Similar Questions

• LX195 MediaSmart Server: How to uninstall Home Server?

  Greetings,

  I tried to ask in the forum Microsoft.

  I'm trying to uninstall Windows Home Server. I have already uninstall the connector and software, however, I just noticed a 20 GB on my laptop partition (drive D called "RECOVERY".) It contains a folder named "Windows Home Server drivers for restoring" and a readme.txt file. How can I delete the partition?

  Thank you

  Shane.

  HP MediaSmart Server LX195

  Windows Home Server Power Pack 3

  Windows 7:

  Click the Windows 'Start' button.

  Right - mouse button click on 'computer '.

  Choose 'manage '.

  Double click on "storage".

  Double-click on "disk management".

  Click on the partition to select.

  Click on delete.

  If the new 'free space' is at the end of the "C:" partition, use:

  Directory of C:\Windows\System32

  20/11/2010 06:24 166 400 diskpart.exe

  'Add' the 'C:' partition in order to integrate the 20 GB partition "C:".

• Windows Home Server 2011 complete system restore problem = cannot start the LAN adapter

  Home built PC

  Card mother Gigabyte GA-Z77MX-D3H

  Network adapter Atheros AR8151 PCI-E on the map connected to the LAN Cat6

  Windows Pro 10

  Windows Home Server 2011 on LAN

  I had a hard drive failure partial who gave no symptoms or errors except a VERY slow start-up and operation.  I tried to do a restore of the entire system of my Home Server 2011 backups to see if, perhaps, just the image was corrupt.  USB was created and all drivers copied from pilots for the full system restore folder.  Has started the full restoration of the system and loaded the missing NETWORK adapter driver by using the scanner for drivers.  Driver support was successful but no lights NIC and the message "cannot find server".  NETWORK card was working fine before, even with the bad hard drive and also after the abandonment of the restoration.  Installed the new drive hard C:-System and that was the main problem, BUT..., the later to restore attempt was always the NIC starts not problem.  Tried the driver directly at Gigabyte support and drivers drivers for the full restoration of the system of records from several different backups.  No love.  Just NIC does not start after the specified load successful pilot.

  All good advice?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• 0xc000000e - Windows Home Server 2011 - how to open the repair or the command line option

  Hello

  I currently have the problem that my Windows Home Server 2011 stops booting with the 0xc000000e error code.

  Of course, I searched the web and found the following article:

  https://support.Microsoft.com/en-us/KB/2261423

  Can I boot from my installation DVD. "Windows loading files.

  While two options:

  -new installation

  -repair

  I click on repair. The next screen prompts to choose a restore image. ???? No other options or possibilities. No command line, nothing.

  OK boot with F8. Start menu. No repair option. Only "safe mode with cmd. Tried this. Then download the same GUI as before. Same two options. No CMD and taxation not possibility to use STARTREP. EXE.

  Any suggestions?

  Thanks in advance.

  Alexander

  Hello

  Your question is beyond the scope of this community.

  Repost in Windows Home Server Forums.

  https://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer

  See you soon.

• Windows home server 2011 - remote access error - wrong password or account to GoDaddy

  My windows Home server remote access does not recognize the domain, I've implemented into Go Daddy.

  The login and the password are considered bad by the wizard.

  Of course I can access with login and password to godaddy.com and everything is nominal.

  I noticed the problem 4 weeks ago. No solution has worked so far.

  I tried even to remove the entry in the register (via REGEDIT), I found a link to that in the past. But the problem remains.

  I fear that some change was introduced on the way the security part

  Hello

  I suggest you post your query on the TechNet forums to get help. Consult the following link:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/ba0d1c89-ad59-414a-bf00-d3085a9f25d9/Windows-Home-Server-2011?Forum

  It will be useful.

• We need a replacement for Windows Home Server that does not cost $700

  We need a replacement for windows home server that does not cost as much as a PC. 2011 is not really available and 2008 has compatibility problems, because it is based on XP and Server 2003. None of the motherboard manufactures will support XP (thanks to MS) and more recent SATA drives do not work in my motherboard more old.

  Perry

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Cannot partition on Windows Home Server

  The problem:
  We are currently the main C drive partitioned 20 GB and we cannot repartition try with several different partition tools.  The error via a tool, it's "the volume you have selected cannot be extended.  Other tools to give similar messages.  The hard drive is 250 GB RAID 1 mirror.

  What we tried:

  A suggestion according to the https://support.microsoft.com/en-us/kb/841650 does not include the home server edition so can't take the risk that she clearly serve States own risk.  We tried Acronis partition software, G-Parted, diskpart.exe command BACK and Macrorit http://macrorit.com/partition-magic-manager/server-diskpart-fails-to-extend-system-partition.html

  Other suspicious Info:

  1. System Properties window says that the operating system is 'Windows Home Server'.

  2 window Information System indicates that the operating system is 'Windows 2003 Small Business Server. "

  The person who owns that server call purchase Home Server edition.  Not sure if this is related or not, but it's conflicting information to find a solution.

  Bottom line, even if that server is outdated and not fully supported any longer, we hope to keep alive a little more long if possible if we simply repartition C drive and increase the free space.  Other than replacing the server suggestions are appreciated because they are not willing to spend the money to replace the entire server.

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Non-native install copy of Windows Home Server

  Hi, I was hoping that someone could erase something for me.

  I have an OEM of Windows Home Server 2011 version that I bought in England, when he arrived in the post that I realized that it is a German copy, probably why it was so cheap.

  I'm not really bothered about it, if I can just change the language during or even after the installation. My question is this a problem or problem further down the line or the whole operating system will be identical to a UK copy if I change the language and regional settings?

  Any help would be greatly appreciated, I'd rather not go back if I can't.

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Home Server 2011 - key invalid product no

  Hello. When you try to enter my product key in my Windows Home Server from a remote computer, I get an error saying that my product key is not valid. When I was troubleshooting and tried to install it on another computer the product key worked very well. I was wondering if someone can help me?

  WHS2011 running on a HP EX475 - 2 GB of ram, 64-bit processor

  Hi Gavin,

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Home Server 2011 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winserver8gen/threads

  Thank you.

• Driver Realtek NIC missing after the previous Windows Update on window Home Server 2011

  During the last windows update, I lost the Realtek NIC driver on windows home server 2011. If you do not have the backup, is the only way rebuild machine or there is another way to install the driver software.

  Hello

  Since the problem is specific to the window Home Server 2011, I suggest that the validation of the query on the forum link mentioned here.

  http://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer

  They are a team of dedicated support, helping issues related to servers in the window of the House.

  Hope the information is useful.

• trying to connect a computer to a server cannot connect to windows home server runnin 2011

  trying to connect a computer to a server that is running Windows Home Server 2011 but I keep an error message saying an another software installation is in progress or a restart is pending... and neither is the case then it will not download the connection software on the computer I want to save them on the server

  Pookie

  Server are better to ask questions on TechNet

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Windows home server v1

  I just lost a hard drive on my windows home server and now I have some questions and some health problems earlier today that I tried to remove a drive from my storage pool only of have worked it for ten hours and don't seem to have done no progress at all so like a genius, I restart the server , and when she comes back upwards the player I tried to delete is now listed but not in my database, but also tough to add I unplugged the drive and plugged again and without change, went missing after another reboot I still had the same status, so I decide to remove the disc. It is anyway I can access this drive to other pc and delete the files or the fact he reformatted to b after the entry of the ESM. Now when I restart the server he repeats to me that health is critical no back ups I would fix how this question

  I bet the guys here know:

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

• Microsoft Home Server problem

  Hi all

  I have a HP Nas server at home and everything that was happening until last night when I tried to transfer files from my laptop to the server on my network.

  When I tried my laptop does not see the drives on the server, there saw that there an acess network power but can't not all readers. I tried to reinstall the connector but kept coming up with 'unexpected error' after you type the server password. Then I did some research and discovered that it had to do with the name of the computer, even though I haven't changed anything on the server or laptop. So I changed the name on the server, restart both the computer laptop and server but still the same problem.

  I then reinstalled home server 2011, hoping he could solve the problem, but it didn't. The only software but that has changed is my internet security has expired, I'm sure that would not prevent the device to see each other.

  No one knows how to fix? Or some software so I can get around it?

  Thank you

  Sean

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.Microsoft.com/forums/en-us/whssoftware/threads

• Installation failure of OEM Windows Home Server 2011 - network continually devices do not found/installed

  Tried to install OEM Windows Home Server 2011 integrated custom server with ASUS M489GTD Pro Mobo and AMD Phenom IIx6 1055 t processor. Installation (3 attempts) would not end when network devices do not have to be found. Having read a number of user group locations and found amount of siginficant discussion on similar type problems. Searched and copied device USB and NIC brand drivers but the installation of WHS 2011 has been unsuccessful. Have since with success installed Windows 8 Preview of consumer on the server by using 'Device Manager' to find installed drivers located in appropriate files and C: / drive. Question: a plan 'best case' would try to do a new installation install WHS 2011 on my server or to an 'upgrade' type which may keep the driver folders/files? Thank you

   

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro on Windows Home Server public. Please post your question in the Windows Home Server appropriate Forum. You can follow the link to your question:

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

• Windows Home Server - Hardware requirements

  Good afternoon

  I am interested in creating a solution of Windows Home Server. I bought a Windows Home Server 2007 OEM media with the intention of creating my own solution, but never got around him a few years ago. My question for the community is the following: what are the hardware requirements for this solution?

  For me, it's a question I think I should know, but for some reason any I am at a loss! I think I need at least 2 computers. The first is the server itself, the second is a stand-alone computer that connects to the network.

  If you can give me some of the basic information I should know before diving into the Home Server I would really appreciate it. If you have all cards/articles that can help you with representation on what I need to do this would be as phenomenal.

  Thank you in advance!

  I confess that I've never used WHS and have no idea about it but. I did some research on Google and found this: http://homeservershow.com/full-tutorial-on-how-to-install-and-setup-whs-version-1.html introduction which then link a fuller version here: http://www.howtogeek.com/howto/9659/how-to-install-and-setup-windows-home-server/

• Home Server 2003 domain name registration does not work.

  I had to reinstall my Home Server software and when I go to update the registration of domain name and the link to my live account it back with an error.  I even tried with an error always the same different domain name.

  Pleas repost your request in the Homepage Server Forum, thank you!