Home Wifi network is not detectable!

Similar Questions

• 2000-2120TU HP laptop: Wifi network does not detect

  Hai,

  Recently I reinstall windows 7 on my laptop. Now it does not detect wifi networks.

  Hello:

  Have you installed the driver for the wireless card?  Otherwise, you must...

  This package provides the driver to support the Atheros Wireless LAN card in the laptop models running a supported operating system.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56572.exe

  You also need the bluetooth driver for this model wireless network adapter.

  This package contains the driver for the Atheros Bluetooth 4.0 installation package + HS in the laptop models running an operating system supported.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56573.exe

• Windows 8 will not list my home wifi network

  Just installed Windows 8 on my laptop HP Pavilion dv7 that was under Windows 7. Now, he does not list my home wifi network, and if I try to manually enter it says it's already there. How to recognize my network?

  Vinod, I tried all of your advice without success and finally finished by calling the technical support of Microsoft Chat. A very competent technician, Urso U., quickly found the problem. Given that Windows 8 has been to see all my neighbors WiFi networks, he immediately handed to zero on my router settings. Well, it seems Windows 8 dislikes the "extended" mode 802.11 g who was broadcasting my Motorola WiFi Modem cable. By changing this one just setting and uninstalling and reinstalling the WiFi RealTek card in Device Manager (to restore its settings), my laptop now happily running on my home network. Thank you all!

• Cannot access my home Wifi network

  * - Original title - access a network

  Host running Windows 7. Cannot access to my home Wifi network. Said an internet access, but then not access available. Access to the internet with an ethernet cable. Thank you

  Hi Gerard,.

  To provide a proper resolution, I would need more information on your side.

  1. that you get any code to error message while trying to access the wifi network?

  2. don't you make changes to the computer before this problem?

  3. What is the brand and model of the router?

  Follow these methods.

  Method 1.

  You can use the network troubleshooter and check if that helps.

  Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

  Method 2.

  We can refer to this article and check if that helps.

  Wireless and wired network problems: http://windows.microsoft.com/en-us/windows/network-connection-problem-help#network-problems=windows-7&v1h=win8tab1&v2h=win7tab4&v3h=winvistatab1&v4h=winxptab1

  Additional information.

  Wireless network card: frequently asked questions: http://windows.microsoft.com/en-in/windows7/wireless-networking-frequently-asked-questions

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• My wifi network does not connect automatically

  Hi all

  im a user frustrated.

  My wifi network does not connect automatically, keeps asking me the password (even if I continue to score for remembering network). The password does not change.

  I also deleted the list of networks do not forget and do it again. Any help?

  Much appreciated guys.

  

  create another user account and start to this account, set up a wi - fi connection and restart to this account.

  Is the same behavior?

• iTunes crashes if its wifi network does not have access to the internet

  Hi all.

  I'm running a 13 "mac book pro with OS X El Capitan.

  I have a very specific problem of iTunes which is really bugging me.  I'm a pro saxophone player and part of my job is performed as a soloist with playbacks on my mac.  To avoid having to walk to the mac to start the track to accompany each song, I use a tablet on a stand that I can place anywhere in the room.  I've set up a router next to the mac that the mac and the tablet of connect to, and I run "retune" on the Tablet (I think it's that his name) which is a wifi iTunes remotely.  Installation is really smart cos he allows me to choose new avenues of selection from anywhere in the room instead of walking back and forwards to the mac every time.

  The problem I have is that sometimes maybe (1 to 5 times), I have a real problem from iTunes when the mac is connected to a wifi network that has no real internet connection.  I'm sure that iTunes detects wifi connection and then tries to access the internet to connect with the store.  When he is not in the store it just crashes and I get the spinning wheel of death.  Most of the time, I can simply restart the program several times and finally he decided to play ball, but it's a real pain.  And I did a concert yesterday where he would not have enough, no matter what I did.  If I had no choice but to turn off the router and keep walking to the mac for each song.

  I can't find a setting anywhere on iTunes that can disable the connection to the store and I really am stuck.

  I also tried alternative programs (I used Clementine briefly but I just found it too flakey to be invoked) and so I am open to others suggests.  But I need a player who has a remote app that I can use on my tablet.

  Thanks in advance for the help.

  I use an older version of iTunes and in the preferences a lot, I can disable Store, Radio, sharing services, probably genius if I got it. Check all your preferences settings including those you think don't matter such as parental preferences (this is where the store is hidden on mine).  Realize also that iTunes has turned into a simple multimedia player to a 75% of sales and marketing as well as the do-it-all tool (aka bloatware) try too many at once and developers can't even imagine someone (i.e. the daily target user) use it without Internet.  Add on that you try to use an application to control iTunes and something like that is likely to misbehave, willy nilly whenever Apple launches an update.

  Don't forget with wi - fi you are subject to interfering signals other wi - fi services in the region or the stage equipment.

• Pavilion dv6-6113tx frequency 5 GHz wireless network has not detected

  Hello

  My HP Pavilion dv6-6113tx Entertainment Notebook PC does not detect the signals of frequency of 5 GHz. I tried to verify my update of the software of wireless network and it is also up to date. I asked my colleague to help, they suggested me to attach a double external dongal wireless broadband. Is this the only solution? Or is it possible to replace the network adapter with a double band if this machine does not have this one. Please help me, I'm really annoyed with my computer laptop wifi. He works with 2.4 GHz wifi signal, ut due to problem of interference as indicated by the internet provider that doesn't have the right speed and speed fluctuates a lot.

  Pending a possitive response,

  Thank you

  Hey @arbab92 ,

  Welcome to the HP Forums!

  I understand that you're looking for more information about the 5 GHz wireless connectivity computer laptop dv6.

  The adapter supplied with your laptop is not a dual band card and does not support the frequency of 5 GHz.

  Generally (RFI) Wireless interference can be solved by changing the channel on your router wireless. The default value for most router manufacturers is channel 6, which runs on 2,437 GHz. You can change the channel on your router to channel 1 wireless (2.412 GHz) or 11 (2,462 GHz) away from the bloated channel 6 if there are several wireless networks and devices in your area.

  If changing the channel is not an option, or does not resolve the problem, you can buy a wireless network for your laptop adapter. The only 5 GHz compatible card that is compatible with your laptop is the Intel Centrino Advanced-N 6230. The part number for this is 631956-001. You should be able to order it on the HP part Surfer Web site or third party like Amazon or eBay resellers.

  You can see how to install this map on page 67 of the HP Pavilion dv6 Notebook PC - Maintenance and Service of Guide.

  I hope this is the information you're looking for.

• Landing/login pages for WiFi networks open not opening not in browsers.

  If I connect to an open WiFi network page that should trigger a login/landing when I open a browser while this happens not & although there is a local connection I can't connect to the Internet. Can anyone suggest a solution because I'm totally stumped!

  
  
  This is reflected in all the major browsers.
  I can connect to secure networks and via a thin Ethernet cable.
  The problem persists even with the firewall disabled (Norton).
  I have not installed ZoneAlarm.
  The problem persists even if ipv6 is disabled.
  The connection is set to acquire an IP etc automatically.
  I acquired the page URLS to connect to my iPhone, and even help entering them manually do not work.
  Ping the same areas fails 100%.
  It makes no difference to renew all network adapters by using the ipconfig command.
  The network adapters are installed and working properly.

  Hello

  You can view these methods:

  Method 1:

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  You can also try resetting Internet Explorer and check.

  http://support.Microsoft.com/kb/923737

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Support for the NETWORK card not detected during Setup

  I try to install vSphere Hypervisor 6.0.  He said there was no detected network devices.  I found the NETWORK provider interface card and ID of device in ESXi console.  I then found his page in the VMware Compatibility Guide. The page indicates 6.0 is supported and this is the Inbox.  No idea what could be causing this error?

  Edit: I can't seem to get the hyperlink in this text editor, I can not paste links.  So, here's a screenshot of the page of network cards

  

  Ah, what is more likely is that 6.0 does not have the appropriate drivers for the game chips and bus system so it does not detect the network interface cards because it does not actually detect parts of the motherboard.

  There were a lot of older drivers removed in 6.0 which enabled 5.5 and below to work on the server not hardware. You the best solution is to install vmware workstation and install it inside the workstation for testing.

• NETWORK card not detected after installing ESXi 4.1?

  Hi all

  I installed the ESXi Server 4.1 on a single server with the following configurations,

  CPU = Intel (R) CPU Xeon X 3430 @ 2.40 GHz

  Memory = 16GB

  NIC = Intel 82574 L Gigabit Network connection-2 no

  After that ESXi installation a NIC card not detected. But two cards network is the same configuration. Due to this problem, I can not configure grouping of NETWORK cards. Please suggest me. Thanks in advance.

  Hello!

  On the screenshot that you are using a motherboard Intel S3420GP. Just a NETWORK card is 82574L, the other on board is a 82578DM, which is not supported. So you will need additional network cards.

  See you soon,.

  Martin

• Windows Vista Home Basic Edition does not detect networks wireless scope.

  running Windows Vista Home Basic on my counter top and it will not locate wireless... period. I know at least 3 in the box and he is always telling me that there are no wireless networks detected.

  On a side note, I installed my router wireless on my laptop (so I know it works!) and have successfully installed on my desktop as well (or if the installation wizard tells me) the top round works on vista premium and office is vista home basic, but for some reason, the office is always telling me there are no available wireless networks. I went through the installation wizard for my router wireless twice now and still that it prove when I go to "connect to a network.

  As much as I know there is no 'Wireless' or switch to be turned on anyway... There may be a command prompt to enable the wireless function?

  Hello

  Have you been able to use the network without any problem on your desktop computer wireless earlier?

  The following articles might help you solve this problem.
  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Windows 8 - home group network is not possible

  A whole new problem now!

  Execution of two laptops using Win 7 and Win 8, nine only 10 days.
  Had it all set up and seemed OK, but after 4 days I started to lose emails & couldn't find them anywhere.

  Today, the residential group doesn't work - the two machines cannot see each other and the router & printer is found on the new machine.

  As the router is not here I can't access the internet or e-mail.
  I tried to move the home page settings via the Control Panel, but I get a message "homegroup is currently sharing of libraries on this computer.

  Homegroup is not available until the sharing is complete"is on the screen for 3.5 hours and I am unable to do anything at all with the homegroup settings.

  Can someone help me please?

  Hello

  I think that you must make sure that you ve enabled the + network discovery + on all computers.

  Network discovery is a network setting that determines if your computer can find other computers and devices on the network and whether other computers on the network can see your computer.
  By default, Windows Firewall blocks network discovery, but you can activate it.

  Here's how a nice HowTo from Microsoft to the + enable or disable network discovery.
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  and here you can find beautiful video + how to create a homegroup.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

• Satellite R630-149 - WiFi network does not

  Hi all,

  I install win7 ultimate on Toshiba Satellite R630-149 currently, I have install all the drivers on the toshiba for the model specific, all site works ok except wifi,.
  When I go to Device Manager, said that need drivers network controller, but I all ready to install it.

  On the laptop with the position that the leds show what work it shows that wifi does not and even I press button function + F8 enabling wifi...
  Can someone help me please?

  Hi mpoultokis,

  You probably installed the wrong driver WLAN? Did you already check that the WIRELESS card is installed and if it s the correct driver?

  This document can help you to identify the right WLAN card and find the driver for it:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  Check this box!

• Two different HP printers on home WiFi network went offline

  Have a HP Deskjet 3050 J610 series and a (rather new) HP Officeject 8600 on my home/office WiFi ditches.  Each is associated with a laptop of Lenovo under MS Windows 7 Home Premium. They are all both passes in offline mode, and I can't get back them. Cisco router SmartSys lists them as devices of the network well as offline (both). I rebooted the router and I've deleted and reinstalled the 3050 at least but still can't it connect.  What should I try next?  Thank you.

  When you configure the 8600 by using the control panel you have the possibility to use dynamic or static IP.

  Dynamics uses the address IP provided by the router DHCP while static is chosen by you, but outside the range the router DHCP.

  8600 Panel control print Network Config. page.

  Check the 802.11 wireless setting.

  For more information, take a look at this linkHP.

• HP Officejet 5740 e-all-in-one: HP Deskjet 5740 fax on home WiFi network

  I am currently sending faxes using a telephone line (Verizon FIOS). HP has an option or that they are planning to put in place an option to send a FAX using my WiFi line. I know that this is not implemented by any other manufacture of PC printers and most services' require a monthly fee and/or a land line. I am not opposed to a monthly fee since I pay Verizon for my phone line each month. So, is there a way for HP to send a FAX to a telephone number and receive a FAX using my PC (and HP software) both on the internet.

  This would save me a lot of money each month, since the amount of FAXES I sent since I bought my current printer is 59 and sent is 52. If I send and receive a FAX 100's a year that would be a lot.

  I know that software exist to create a FAX and receive FAX included in Microsoft operating systems (Norton was a years ago which was a stand-alone application). But it seems that the problem is transmitting via the Internet to a phone number.

  Smart phones can send information (text messages) to a phone number using only the internet, so I think that it is not difficult to provide functionality. HP currently allows you to send printing by internet on your personal printer. What is the difference with sending a FAX to a printer?

  Security issues with Fax require the document printed only and not saved in an editable format. PDF files already that.

  What am I missing I, except a reluctance on the part of the printer manufactures enter this company or the resistance of the telephone companies for ground transportation?

  FAX lines must use the analog telephone lines.  It's their specification.  The other option you have is eFax to send and receive faxes.