Home with Lr 6.1.1 and EOS T6i problem

Similar Questions

• Connectivity with AT & T-Motorola 3360 and Airport Extreme problems

  Bought a new extreme-Airport (7.7.3) to replace my old AE after 9 years of service.  The installation procedure, but could not get the airport to connect with my modem (Motorola 3360).  Called at & T and they crossed put me the modem in Bridge mode and which seemed to work.  But only temporarily (about 5 hours).  Restart the modem and the airport was not working.  Troubleshooting I tried to plug my MacBook directly into the modem, but even the computer couldn't get an internet connection.  Another call to AT & T and they reconfigure the modem to their end.  After 90 minutes and try everything they could, they have finally admitted defeat and told me that they could not solve the problem.

  However, after a fairly exhaustive search of this forum, seems to be two issues that many people is with Airport extreme.  One is that the modem (in this case a Motorola 3360) is perhaps not fully compatible with the airport.  The AT & T support person was not aware of this until I asked about it, so she did a quick search and was rather surprised to see that there is a lot of people having problems with the Motorola Modem.  She told me that they use no more Motorola modems but ship the 6200 of Netgear.  "All know issues?", I asked.  She sought and, to his surprise, even once, there was.

  So, first question.  Does anyone know a modem that is compatible with the airport or use one that they had to limit problems with?

  The second question prevailing seems to be with the IPv6 protocol.  Anyone know if there are problems with the AT & T IPv6 protocol and the most extreme airport?  I did not disable IPv6 yet to see if that helps.  I thought I'd ask here first.  Couldn't find anything on the AT & T site.

  When I return from the road (great place to go to get away from technology) I will make a new round of full power of all the components and try Setup again from scratch.

  Any ideas or suggestions would be greatly appreciated.  Miss all know profanity.

  Thank you.

  Any other relevant information: 6.3.1 the utility Airport, Airport Extreme 7.7.3, MacBook Pro running 10.8.4, modem Motorola 3360, AT & T high speed DSL, shoe size 11-1/2 wide.

  When you have configured the 3360 as a 'bridge', this would mean that the AirPort Extreme should then be put in place to provide the PPPoE connection service. The airports are not known for their reliability in this type of installation... no matter the type of modem that you can select, so I drop this method as a connection option.

  If you want to keep the 3360... and you have time to experiment... then you can set the 3360 to its original default settings and configure the router from the airport most convenient to connect using DHCP in router Mode of DHCP and NAT.  That will produce what is called a message Double NAT, but maybe it's not of concern on a simple home network, and Apple provides you with the option 'Ignore' the Double NAT, so the airport will display a green light instead a light orange blinking slow.

  You need to try this configuration for a few days to see if the Double NAT will be a problem or not, because it is not possible to predict the effect of a Double NAT on a network... you have to test a few days see how things behave.  If this configuration works well, for you, then you can leave it as what.

  Please note that I do not recommend this type of installation, just suggesting it as an option this work could , if you want to keep the 3360.

  How Double NAT affect IPv6, I can't tell, since I did not use att for several years, and I'm not familiar with their implementation. On wired, IPv6 works fine on the airport with Comcast and Time Warner.  We can provide these parameters for you if want, but have no idea how well... (or if)... they will work with ATT.

  If the installation of Double NAT does not work, your best option would be to go there and get a modem/router or gateway to ATT device and then set up the most convenient airport in Bridge Mode works correctly with the modem/router ATT.  You will turn on the routing of ATT function in this type of installation, but the airport can also produce a signal from the wireless network that you can use.  The modem/router ATT will also provide a wireless signal that you could use for guests, or disable the feature, if you do not need two wireless networks.

  This may also be the best option if you want to configure IPv6 as IPv6 of ATT service must be compatible with the modems/routers and gateways.

• Problems with Sansa e280 (8Gb) - lots and lots of problems!

  Hi everyone, I tried looking for answers to this problem in forums and technical support, but since he seems to have worsened, I thought I'd see if anyone can help me.

  My Sansa was bugged for a while, but finally stopped work and say "unable to load image" (as many others have known). I tried to download the update for Sansa, who was installed, but could not then find updates, even if my device is connected.

  So I tried the manual way and downloaded the firmware myself. At this point, I could always go into recovery mode. I transferred files and unplugged the unit. He seemed full of hope, he was installing but the screen went black and the blue ring stays on. For a time looong.

  Now the only thing that he meets is the power button, which when pressed, gives the ring to go blue and the screen do nothing. Recovery mode will not work. Is there something to what I can do? In another post, someone suggested that the battery might help - thoughts?

  Thanks a lot for any help

  Right... After using this site as a guide, I can confirm that my Sansa is well and truly fixed. Back from the dead! Now I understand why people like Linux

  Best of all, he glided FM Radio over there - that wasn't there to begin with!

  Thanks for your help Jamieson

• Tecra M11 with Fedora x 64-Hang and fan of overtaking

  Hi all

  I got a lot of Toshiba laptops in the past and so far I run Fedora on it without problem.

  Since a few weeks I had a new Tecra M11 and I installed Fedora x 64 on it.

  Unfortunately, from time to time I have a problem: laptop freezes and after a few seconds fan invaded. In this case, I have no choice and I have to stop my laptop by pressing power button.

  I've updated the BIOS with the latest version available and since the problem occurs less often, but I continue to meet with he...

  Any help?

  Hi mate

  I think that Windows 7 is pre-installed on this laptop.
  Have you noticed the same behavior for laptop with Windows 7?

  I m asking this because it is not easy to say if it could be linked to the operating system or hardware problem... you know...

• XP Home SP2; Currently installed with IE8, Live Essentials, MSE, and Windows Defender...

  I have reistalled my XP Home of authentic CDs and subsequently I was only able to download Windows updates. However, after I received your response referring to download related problem with IE8, MSE Live Essentials. Well, I downloaded MSE, but it cannot download the updates because it fails to update due to internet connection failure. I also downloaded Windows defender, but it says "the program cannot check the updates of definitions. It has an error code 0 x 80004002. Even after trobleshooting with 'Fix' and 'fix the problem with Microsoft Windows Update' he says it doesn't, 'window could not help solve the problem. Finally, I'm not yet able to download Windows updates. I get the following message, "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem, etc., etc... Given that I'm unable to download Windows updates and therefore SP3, MSE will never be installed. So please help.

  Try this {deleted} and let me know if no effect

  What he does is a reset of the stuff that makes your windows update also works, you don't need to do the updates of windows to get SP3 the link below will take you to this http://www.microsoft.com/en-us/download/details.aspx?id=24

• Hi, I have wireless internet in my house and I gave my password system so that others in my home with laptops can use my provider internet-how can I change my password now?

  original title: Hi, I have wireless internet in my house and I gave my password system so that others in my home with laptops can use my internet provider. I want to change my password now. How can I do this or do I need to contact my provider to do this? __

  Hi, I have wireless internet in my house and I gave my password system so that others in my home with laptops can use my internet provider.  I want to change my password now.  How can I do that or do I need to contact my provider?

  Normally, you must have set a wireless router with a password to the wireless network using the wireless network that you have set up in your home.

  If above is the case, read the information that came with your router, or search for it on their website on how to change the settings in it.

  See you soon.

  Mick Murphy - Microsoft partner

• Canon S820Printer my printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full.

  My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print.  Ink tanks are full.  What bad past and how to fix it?

  If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8783

  - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8844
  If all goes well.

• I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

  How can I solve this problem

  the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

  If you are not a Subscriber cc then Dropbox or iCloud will work as well.

• Whenever I hit the installer and run it, it comes up with a window with two buttons, an asset and a button at home. A small circle rotates around on the screen. Nothing ever happens in addition. I tried it several times redownloading. What sh

  Whenever I hit the installer and run it, it comes up with a window with two buttons, an asset and a button at home. A small circle rotates around on the screen. Nothing ever happens in addition. I tried to re - download several times. What should I do? Here is a picture of what happens:

  See if the following can help:

  White screen

  https://forums.Adobe.com/thread/1249756

• How to stay with a clear new tab and not the search page of Yahoo every time?

  Years, I used Firefox with claire of new tabs and achieved this in the menu Options, general tab, display an empty Page - and the next line, remains empty. This has always worked, so far. Today, each new tab navigation takes me directly to the Yahoo Search page, which I certainly don't want.

  So, still today, I then passed to the 'Search' tab (in the Options menu) and removed all search engines from the list, including the option checked "Yahoo." However, each new tab again takes me to a "Yahoo" search page

  How can I stop this now and forever?

  I look forward to your solution.

  Thanks a lot for your help, Mark.

  You can watch the pref browser.newtab.url the topic: config page and set this pref to the URL of your preferred the new tab page.

  • the new default tab with the tiles page is on: newtab
  • the default homepage is Subject: Home
  • to a blank page, you can use Subject: vacuum

  The pref browser.newtabpage.enabled must be set to true to use the page defined through browser.newtab.url like the new tab page.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  See also;

  • https://support.Mozilla.org/KB/new-tab-page-show-hide-and-customize-top-sites

• How can I get my old Firefox home pages of my back links and all my favorites?

  I have a new computer with Win 7 64 bit and started using the mine field, but I decided to go back to Firefox. Now have Firefox 4, but the need for all my links and bookmarks I have on my other system. Should what files I look for else my old drive to get my addition of links and bookmarks for my Google home page in Firefox. ?

  Your old profile is located here in Win XP and W2K:
  
  drive: \Documents and Settings\username Windows login\Application Data\Mozilla\Firefox\Profiles\profile_name

  Thunderbird support is here. (I don't use it myself.)
  
  http://forums.mozillazine.org/viewforum.php?f=39

• error 0 x 80070246 when you try to install Vista Home Premium SP1. "Missing manifesto" and "Payload missing file" CheckSUR.log errors, running System Update Readiness too.

  I get 0 x 80070246 errors when you try to install SP1 for Vista Home Premium.

  After you run the system update readiness tool, I found the following errors in my CheckSUR.log

  =======================================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-09 19:13

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) clear CSI missing 0x00000002 WinSxS\Manifests\x86_microsoft-windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest x86_microsoft-windows - msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en - us_37881fc949e23021
  (f) CSI Payload file missing 0 x 00000000 jscript.dll x86_microsoft-windows-writing of scripts - jscript_31bf3856ad364e35_6.0.6002.22146_none_852abf080d834b3e

  Summary:
  Seconds executed: 1221
  Found 2 errors
  CSI shows lack Total count: 1
  CSI Payload file lack Total count: 1

  Unavailable repair files:
  winsxs\manifests\x86_microsoft-Windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest

  =======================================================

  The newspaper CBS.log itself has several types of mistakes, too.  Here are some samples:

  -Errors 'M²;

  2009-10-09 21:10:27, info CBS SPI: from SPInstall
  2009-10-09 21:10:27, info CBS SPI: could not start the etl newspaper.  Continue without.  HR: 0 x 80070020
  2009-10-09 21:10:27, info CBS SPI: wave 0 detected
  2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
  2009-10-09 21:10:27, info CBS SPI: spent before due diligence
  2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
  2009-10-09 21:10:27, info CBS SPI: M² is not included in
  2009-10-09 21:10:27, error CBS could not initialize wrapper M²
  2009-10-09 21:10:27, error CBS could not define M² by default LCID of the system value

  -"Could not find the CixTarget Molok" errors.

  2009-10-09 21:29:25, CBS Plan info: package: Package_6_for_KB954366 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3, updated: 954366-50_neutral_GDR, current: installed, pending: the default start: installed, planned: installed, targeted: installed, limit: installed, selected: default
  2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_server ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
  2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109
  2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_sc ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
  2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109

  -"ILLEGAL_CHARACTER" and more "Sqm" errors-

  2009-10-09 21:30:04, error CSI 00000022@2009/10/10:01:30:04.150 (F) d:\longhorn\base\lstring\lblob.cpp(2217): native STATUS_ILLEGAL_CHARACTER error of the function RtlTranscodeLBlobs expression: __rv. UcsCharacter! = (0xffffffff)
  [gle = 0 x 80004005]
  2009-10-09 21:30:21, error CSI 00000023 (F) HRESULT_FROM_WIN32 (582) #489176 # to Windows::ServicingAPI:CCSITransactionAnalysis_ICSIInventory:EnumDeploymentReferences(flags_=_00000003,_tlcid_=_@0x655fac0,_pszSubscription_=_(null), pszCodebase = (null))
  [gle = 0 x 80070246]
  2009-10-09 21:30:21, CBS WER info: generate report of failure for the package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, status: 0 x 80070246, source of failure: other CBS, start state: 0, target State: 4

  
  2009-10-09 21:30:26, information CBS Exec: comprehensive treatment.  Session: 30034248:1278646622, package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, hr: 0 x 80070246
  2009-10-09 21:30:26, State of the information system sleep restored CBS block: 0x80000000
  2009-10-09 21:30:26, CBS Session information: 30034248:1278646622 finalized.  Reboot required: no
  2009-10-09 21:31:30, CBS briefing: initialized 30034249:1690541326.
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, CBS Session info: 30034249:1690541326 finalized.  Reboot required: no
  2009-10-09 21:31:31, error CBS doesn't have value of M² for the time of the scene
  2009-10-09 21:31:31, error CBS doesn't have the m value for the build number
  2009-10-09 21:31:38, CBS Session info: 30034249:748895326 finalized.  Reboot required: no
  2009-10-09 21:31:41, info CBS SPI: cannot install MS using the user interface.  HR 0 x 80070246
  2009-10-09 21:31:41, info CBS SPI: SPInstall terminating, return code 0 x 246
  2009-10-09 21:31:41, error CBS didn't M² value for parameters
  2009-10-09 21:31:41, error CBS failed to set exit code value M²
  2009-10-09 21:31:41, error CBS didn't M² for the SKU value
  2009-10-09 21:31:41, error CBS doesn't have the m value for the build number

  ------------------------------------------------

  I don't understand exactly how errors in the two newspapers are related, but my opinion is that, if I can solve my CheckSUR.log errors, CBS.log errors will disappear to, and then I might even be able to install SP1.

  Any help that can be provided would be greatly appreciated.

   

  1 person needs an answer

  For what is interesting, what I ended up doing to solve my problems was to re - install Vista with the 'upgrade' option, so I don't lose any of my files or desktop settings...

  After that, I had a few problems with my OS reinstalled with several (80 +) updates, SP1 and SP2 from catching up.  But overall these problems were minor compared to it, that I lived just to fix some missing files.

• FSX with acceleration gold Edition starts now when I upgraded to Windows 7. It happens just with blue logo start FSX and crashes.

  I ran FSX with acceleration gold edition on my Dell inspion 520 with Windows Vista Edition home premium SP1 and 2 and it worked very well.  Now I updated to Windows 7 Home premium and it just hangs.  I uninstalled FSX and acceleration completely and even delete the directories and given it a clean install.  It seeks to build the database markings and landscapes, and then I let myself just with blue logo start FSX and even after a few hours, nothing happens. It would help if she had an error message, but nothing.  I have also reinstalled the driver for my NVIDIA GEforce 9400 graphics card and checked DirectX and its says its fine.  I have dual core 1.66 32-bit with 4 GB of ram.  Someone has any idea how to solve what Miss me my vol. I tried also to start with compatibility for Win Vista SP1 and 2 settings, as well as Win XP.  I can't get my WinTv Nova-t work either which suggests that it is a graphics problem.

  Hi AMrita,
  I always had the problem last night but I was check the forums and I now after much deliberation to be fixed.  When I go into the Device Manager, I checked all the drivers including the audio player and I was informed that they were all updated and works very well.  Although I had sounds and music I check the setting in 'Control Panel', but this is no software not loaded and nothing is even not a mistake.  I then tried to download the latest software and driver from Realtek for Audio ALC888 and got the following error while installing - an error (-5009: 0x8002802b occurred) previous installation did not finish.  On Googling this error I found a solution in one of the forums that was as follows: to

  Delete C:\Program Files\Common Files\InstallShield\Professional\Runtime - folder or rename it, just in case.

  and then run the windows 7 install for the sound card Realtek and it is now successfully downloaded.  The PC restarts, I started FSX and now its running fine.

  Thanks for the help... got in the end and think I could play music and watch a movie and the sound was very good.

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed.

  Generic host win32 problem...

  HI, I have soundcards XP SP2, version 2002. Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed. After all that, my internet stops working and against hepatitis a to erboot to make it work again. Help, please

  Hello

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)