Horizon Workspace Windows client unnecessary synchronization errors

Similar Questions

• Cannot install the pkg of update for the windows client, I get error code0x8004ff84

  I get error code ox8004ff84

  Hello

  Method 1:
  You can read the following article.
  Cannot install Windows updates
  http://support.Microsoft.com/kb/555461
  Method 2:
  You can read the following article.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. See the following link for more information.
  http://support.Microsoft.com/kb/322756
  See also:
  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
  http://support.Microsoft.com/kb/906602
  It will be useful.

• Windows client horizon Workspace - registration of username and password

  Hello

  is it possible to save the user name and password in the Windows Client workspace?

  Currently, when the network is not available or when the client disconnects, I need to re - enter username and password to authenticate. Can he work as a client Dropbox (IE always connected sound?).

  My version of workspace and the customer is 1.5.2.

  Thanks to all in advance.

  I have it and it works as well for the customer and the web interface. In fact, it is a must in my opinion. Of course when you are outside your network, you will need to enter your creds. But that's normal. One thing that I got hurt on SSO can be difficult to implement sometimes. Go and check, go to a domain controller, the properties of your connector object that will be SSO. Ensure that:-on the delegation tab him 'trust this computer for delegation to all services (Kerberos only)"is selected otherwise, it won't work.   -On the control of the editor attribute, the ServicePrincipalName also has the correct values as HOST/connector-vaX.yourdomain.com (we have a split dns and workspace is on mydom.com and initially it was set local.mydom.com when the object was created) fun Seb

• Launch of the Horizon workspace office show nothing

  Hi Experts

  I followed the documents, in order to integrate with horizon workspace View5.2.

  Synchronize view pools, configuring SAML authentication without error.

  then I tried to launch the desktop from my workspace,

  but when I right click Desktop workspace pool.

  I can only choose "Open With View Client" but then he revealed nothing

  and I can't choose 'open with Web browser.

  anyone encountered this before? or can you tell me how to debug this?

  much appreciated for your reply

  Thank you

  Here's the beta download link that has access HTML http://communities.vmware.com/community/vmtn/beta/vmware_view_beta

• Horizon Workspace Remote Authentication App

  Hello

  I get the message inside my VDI-Horizon-Workspace of Win7 User Portal: "for safety, this remote application requires enter your username and password to start."  This isn't your RSA SecureID password. »

  I have Kerberos enabled successfully using the secondary connector - goes for SINGLE sign-on, so when I run the "Open VMware Workspace web page" it authenticates me on my portal user automatically, but when I click on an icon of the hosted application I get the above message.  IF... I provide my credentials once I am able to launch applications of law for the duration of the browser session.  Once I have close this window/session and start another "web page opened workspace of VMware", I then repeat the process of supply credntials.

  I'm under Horizon Workspace 2.0 with Horizon 6, settings policies, and authentication by default on the gateway - will (FQDN).  All SSL certificates are in place and trusts for the vApp/vCenter/view.  The time on the vApps/View/vCenter/RDSH/VDI are synchronized.  I have three hosted applications and everything works normally, once that submit the name of user and password or directly launched from the Horizon view Client.  Any thoughts?  Thank you.

  Matt

  This works as expected. You will need to provide your password once per session capable of launching of the resources of the Horizon (computers desktop and applications). As you connect to the portal and workspace using kerberos, you are being prompted to enter a password on the first launch of the Horizon resources. If you connect to the workspace portal using the name of user and password, you don't need to re-enter your password.

• Problem with HOL-MBL-1304 - Horizon Workspace - explore and deploy

  Hi guys,.

  I'm in the lab of Horizon workspace.  Office of the Chief Executive, I tried to open the Horizon Web Page, but it is grayed out.  Instead, I clicked on the link to logon.  Horizon space me exploded with the following error:

  "The service Horizon workspace is not available."  "Please try again later".

  I tried to go through the web client to vCenter but jumped with an authentication error.

  I tried to go through the portal of the entrance door but jumped with "a communication problem occurred.  Failed to load the page you want to view. 502 bad Gateway.

  I ended up leaving the laboratory, re-registration and launch of a new laboratory.  Everything seemed to work OK except that the CEO was not automatically connected on workspace.

  Just a heads-up...

  It is possible that you were connected to a laboratory 'cold', i.e. a laboratory that has just begun.  We try to keep enough with labs (pre deployed and running) so that everything is ready to go, but the HOL has been busy lately post VMworld.

  Please give the lab a bit more time to warm up or try to take the lab again.  Wait a few minutes before resuming the same laboratory, however.

  Thank you!

  Bill

• ThinApps tests during capture and build process when you use Horizon Workspace

  Hello

  We are about to make a client implementation of Horizon Workspace with about 40 ThinApps we still have for packing

  When we package apps, during the NBC process we will include the Horizon in the package.ini parameters

  AppID
  HorizonOrgUrl

  VersionID

  
  

  After that we capture the app that we will then have a test PC to test the ThinApp to ensure it works before it is added to the repository ThinApp and having created rights. However the ThinApp will not work because there is no entry of right in the workspace for even and the application displays the error message.

  
  

  How Pack applications and test them before you configure the workspace? Or can't we? It must create all the ThinApps, download them to the repository, wait for the workspace to scan them, create rights, then test?

  
  

  Also when we update an application using the AppID same and incrementing the VersionID value, the tester will be able to test this on their PC to test before upload to the repository Horizon ThinApp or the user will get the same error message horizon? We don't want to postpone until it has been tested. Or is it possible to use the old method of entire update where we keep the same .exe entry point and just update the dat a.1 file? This will break the Horizon integration?

  
  

  Thank you
  

  This allows ease of Management Horizon Workspace does not change behavior of the package. This is why I would recommend to run tests without activating the Horizon Workspace manageability. There is no way to run a ThinApp package with Horizon Workspace manageability enabled without Horizon Agent installed locally and having the right.

  Once the tests have been completed, you can enable manageability Horizon workspace by changing the package.ini or by running relink.exe - h.

  Same thing about the update of test blocks. Check the functionality without manageability Horizon active workspace and turn manageability Horizon Workspace.

• VMware View Horizon Workspace (credentials invalid SAML)

  I get this error for access to a desktop computer using Horizon Workspace...

  Failed to launch the desktop view. Please contact your administrator for help (credentials invalid SAML).

  You know the solution to this problem?  Thank you

  Connect to VC and check if all vms and notice Broker Vms VAPP they are invited with the host time synchronization.

  VM > Settings > Options > VMware Tools > synchronize the time of comments with the host.

  This should take care teenager derivatives.

• questions to the vmware horizon workspace

  Hi guys

  I implemented the vmware horizon workspace in my test environment. It works very well. but now I have two questions:

  1. is it possible to add storage smb from a windows file server to the device of data? I would like to automatically synchronize the directory on the file server windows with vmware view on appliance workspace data. and for all the users in my domain. (so I think that the vmware agent horizon is not the right tool for this action)

  2. is it possible to implement authentication twolayer? I use two layers for vmware view horizon in this workshop, but I can't find any documentation or the button for twolayer auth in the vmware horizon workspace

  Thank you much for the help

  Kind regards

  Hello..

  I'm glad you like what you see so far...

  1 no, today it is not possible to add Windows shares data.

  2 horizon 1.0 workspace supports RSA Secure ID for two-factor authentication.

• Synchronization error messages

  Hello.

  Since Monday I get on Firefox 31 synchronization with a Windows 8.1 machine errors:
  "Sync has encountered an error during synchronization: unknown error."

  Here's the synchronization log:
  http://pastebin.com/fuY8u572

  Looks like it's sync everything except the tabs open on this computer.

  Can you please take a look?

  Hello jesuita, this is a known problem for mozilla engineers who are currently working on a fix (the problem is on the side server, so there is nothing that you can change your side). progress on the issue, you can follow or vote for the bug #1045691.

• USB MTP device drivers will not properly install for Samsung Galaxy S3 - Windows will not synchronize Galaxy S3 for computer

  Windows will not synchronize Galaxy S3 synchronizes a mobile computer.  When I attach USB cable the computer flashes added new hardware, but when you click the icon it goes in loops.  I've uninstalled and reinstalled the drivers in Kies and always the same problem.  All other cell phones synced to computer, including the Samsung Galaxy S3 but my iPhone no matter what I do.  When I open Kies and connect the USB cable there is no reconition of the cell phone.  I've seen a Code 31 error appear in good devices.
  Add questionnaires of the Add Hardware Wizard...

  SAMSUNG Mobile MTP Device (a yellow excamation sign)
               
  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  SAMSUNG Android ADB Interface

  This device does not work correctly

  SAMSUNG Mobile USB Modem

  This device does not work correctly.

  SAMSUNG Mobile USB Composite Device DeviceThis works correctly.

  This device does not work correctly.

  It is all the information I can give at the moment.  I forgot to mention I am running Windows XP I hope that helps also.  With everything says I don't understand why will not load the drivers required for this device.  For any help or suggestion will be greatly appreciated.  Thank you all

  Hello

  -What is the driver version you are using?

  The latest version is ver.v1.4.6.0 out June 19, 2012.

  I recommend you to please update the USB drivers on your computer and check if it helps.

  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658

  If this does not help, I would recommend you to please contact Samsung support for assistance.
  http://www.Samsung.com/us/support/

  There is a community forum for Samsung where you can ask questions.
  http://www.Samsung.com/us/support/owners/product/Sch-I535MBCVZW

  Hope this information helps.

• Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

  Original title: Windows Rundll error on startup

  My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

  What is a rundll error?

  File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

  Why do you Rundll errors?

  Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

  STEP 1: IDENTIFY

  The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

  STEP 2: STOP THE PROCESS

  Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
  1. open your Start menu.
  2. click on run
  3. in the command screen type:services.msc
  4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
  5.stop the "dll" service immediately.

  NOTE: sometimes the dll process can not be stopped by this method.

  

  STEP 3: CHECK FOR AND REMOVE

  You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  This action will help you speed up the considerable load time of your applications. Here's how:

  1. click on Start
  2. click on run
  3. type regedit
  4. find this registry key:
  HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
  6. delete the value and reboot.

  

  SPECIAL REMARKS

  Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

  The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

  ======================

  More information is a lot to explain and resolve the problem.

  Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

  Because not only it solves problems, there will be new user settings and the program files needed for the user account.

  Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

  Here is the link.

  Run hitman pro 3.5

  http://www.SurfRight.nl/en/downloads

• Automatic updates - kb265370 will not be installed because windows encounter an unknown error: 64 c

  Automatic updates - kb265370 will not be installed because windows encounter an unknown error: 64 c

  Have tried several times to install but keeps failing.

  I used a cup-Kiss/fix registry Ccleaner and Norton 360 as well as sort my .net framework client profile 4 back to the original configuration (which sorted prior regarding a contemporary update update problem) and have run two microsoft ' difficulty his '-501223.exe and the other with a long name!

  any help would be appreciated

  Fixed - Sorry for not knowing how to mark the wire/q etc.

  for fellow sufferers, I had to repair/patch/reinstal my .net 1 to 4.

  not really fast, but it worked

• Windows Defender encountered an error: 0x800705b4. This operation completed because the time-out period night.

  Hello

  I'm a Microsoft Online Customer Service, which contacts on behalf of my client. It lights its Windows Defender and received this error message below:

  «Windows defender encountered an error: 0x800705b4.» This operation completed because the time-out period night. »

  Hello

  ·         You have a third-party security software installed on the computer?

  Method 1:

  If so then try to disable the antivirus and then check to see if you can turn on Windows Defender.

  You can check this link for more information on turn Windows Defender on or off: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Defender-on-or-off

  Note: Make sure that you enable the antivirus once you are finished with the test. If the problem is resolved, you may need to contact the manufacturer of the program for the settings that can be changed or if there are other updates for this program.

  Method 2:

  Follow the steps in troubleshooting this article and check if that helps:

  How to troubleshoot Windows Defender definition update

  http://support.Microsoft.com/kb/918355

  Also, try the steps in this article: Impossible to activate the application Windows Defender in Windows Vista

  Method 3:

  Try to restart the Windows Defender service and check if it helps.

  a. Click Start on the start menu, search type services.msc and press ENTER.

  b. in the services window, locate Windows Defender service in the services list.

  c. check that the status is started. If the condition column is blank, right-click on the service and select start.

  d. If you get error trying to force start the Windows Defender service, try to change the Startup Type to automatic and restart the computer.

• When I go to install Silverlight, I get an error message C:\Windows\system32\samcli.dll error message.

  samcli.dll

  I try to use Netflix... It worked last night and when I went to play today it asked me to install Silverlight... when I go to install Silverlight, I get an error message C:\Windows\system32\samcli.dll error message. I tried to uninstall Silverlight and reinstall it using Revo Uninstaller Pro and still, I get the same error message. You can provide any help would be greatly appreciated.

  Thank you

  Lisa

  samcli.dll is associated with Security Accounts Manager Client and not with Silverlight.

  Download this dll from here: -.

  http://www.dllme.com/dll/files/samcli_dll.html

  Now, replace the dll file that is corrupted with the dll file you downloaded here: -.

  C:\Windows\System32

  [Note: it is a hidden file, so you must enable Show hidden... files]

  [Organize--->---> the folder options view and search]