questions to the vmware horizon workspace

Similar Questions

• All VMware Horizon workspace

  Hi, I have two questions about VMware Horizon Workspace.

  I know, workspace can use the web application, but can someone tell me it's just like what type of application?

  Another issue is that if I use the thin app, applications can be used in any device, when I use workspace?

  For web applications, workspace can support applications that support SAML for authentication, such as Google Apps, Sales Force, Webex etc

  ThinApps are designed to run only on windows desktop computers. They will not run on any device

• vmWare Horizon Workspace - change port number

  Hi guys,.

  I installed the workspace vmware horizon as a proof of concept, everything works fine. I'm now doing the public gateway. The problem which is the port number (443) that uses the bridge can be put on the public because he is facing some of our other things. I wonder since everything is installed and working properly, what would be the proper way to change the GATEWAY port number?

  Thank you

  Unfortunately, in 1.0, we do not allow change the port number.

  Will you be able to move to 1.5? Then, allow us to change the COMPLETE domain name and port.

• Problem with HOL-MBL-1304 - Horizon Workspace - explore and deploy

  Hi guys,.

  I'm in the lab of Horizon workspace.  Office of the Chief Executive, I tried to open the Horizon Web Page, but it is grayed out.  Instead, I clicked on the link to logon.  Horizon space me exploded with the following error:

  "The service Horizon workspace is not available."  "Please try again later".

  I tried to go through the web client to vCenter but jumped with an authentication error.

  I tried to go through the portal of the entrance door but jumped with "a communication problem occurred.  Failed to load the page you want to view. 502 bad Gateway.

  I ended up leaving the laboratory, re-registration and launch of a new laboratory.  Everything seemed to work OK except that the CEO was not automatically connected on workspace.

  Just a heads-up...

  It is possible that you were connected to a laboratory 'cold', i.e. a laboratory that has just begun.  We try to keep enough with labs (pre deployed and running) so that everything is ready to go, but the HOL has been busy lately post VMworld.

  Please give the lab a bit more time to warm up or try to take the lab again.  Wait a few minutes before resuming the same laboratory, however.

  Thank you!

  Bill

• VMware View Horizon Workspace (credentials invalid SAML)

  I get this error for access to a desktop computer using Horizon Workspace...

  Failed to launch the desktop view. Please contact your administrator for help (credentials invalid SAML).

  You know the solution to this problem?  Thank you

  Connect to VC and check if all vms and notice Broker Vms VAPP they are invited with the host time synchronization.

  VM > Settings > Options > VMware Tools > synchronize the time of comments with the host.

  This should take care teenager derivatives.

• Launch of the Horizon workspace office show nothing

  Hi Experts

  I followed the documents, in order to integrate with horizon workspace View5.2.

  Synchronize view pools, configuring SAML authentication without error.

  then I tried to launch the desktop from my workspace,

  but when I right click Desktop workspace pool.

  I can only choose "Open With View Client" but then he revealed nothing

  and I can't choose 'open with Web browser.

  anyone encountered this before? or can you tell me how to debug this?

  much appreciated for your reply

  Thank you

  Here's the beta download link that has access HTML http://communities.vmware.com/community/vmtn/beta/vmware_view_beta

• VMware vSphere 4 licenses essential question and the number of processors

  Hi all

  I have a question about the Essentials of VMware vSphere 4.1 license. We have a client interested in a VMware vSphere Essentials license. The machine runs on 2 x processor Xeon 5675 6 c. Now I read somewhere that there was a limitation of the number of processors that can be used with the edition of Essentials. If I remember correctly, the number of physical sockets is limited to 2, but I remember that there is another limit, but I could not find the document describing and wonder:

  Is there a limitation on the maximum number of 4 cores on one physical processor that can or will be used by VMware vSphere 4.1 Essentials or there is a limitation on the number of 4 vCPU that can be assigned to a guest?

  I would like to know because if this is a limitation on the number of vCPU that can be assigned to a customer that would not be a problem because we have no guests in need of vCPU, then 2 more, but if this is a limitation on the number of cores that would be used by VMware vSphere Essentials, it would be a waste of money to buy a 6-Core ;-)

  Hello.

  2 taken with 3 guests, 6 hearts and SMP 4 lanes for virtual machines.

  These limitations are available at: http://www.vmware.com/products/vsphere/buy/small_business_editions_comparison.html

  Good luck!

• 2 running on the same computer - Question of Performance vmwares!

  Hi everyone, Im quite new post on these forums, so I hope Im posting this question on the right place, if not, forgive me.

  My question is,

  Im trying to run 2 workstations vmware on my computer with my main window.

  I'm using windows xp sp3 on the vmwares as well as on the main window

  Well, my problem is, it seems that with 2 vmwares running, some programs I opened on two of them will slow down the vmwares as it rly looks like an old computer running on vista (for example)...

  So my question is, is anyway that I can do the 2 vmwares perform better?

  Only a vmware works perfectly, but when I got the 2 open and I try to run different things on two of them, they slow down and hit low lvls performance...

  Well,.

  Ive tried to put more memory ram for each vmware

  Ive tried to put less memory ram for vmware wach

  Ive tried to lower resolutions or colors or themes

  But none of them gave positive results, I think that lower the ram to each of them did work a little better, but not as much as I need.

  Now, I had 2 vmwares and 1 of them is cloned from the other and Im wondering if it matters at all in terms of future performance, exactly what I need now.

  My computer specs are as follows:

  core2 quad 2.83 ghz processor

  4 GB ram 800 mhz

  XFX 750i sli motherboard

  SATA hd

  I RLY want and need to have these 2 vmwares works perfectly on this computer.

  What can I do? And/or what say u?

  Any material of parts upgraded? Or the problem is the configuration of the vmwares?

  As I said Im wondering if the vmware clone affects this, and if I should just create a new vmware instead of cloning that... etc etc.

  Or if I should buy more ram... or if its all in the vmwares configuration

  Please let me know what can I do to increase performance or have a perfect combination of 2 stable vmware running on my computer with programs inside also running well.

  Programs are not heavy, Id say like programs for simple tasks. Ive checked the processor used and he's not above 30 to 40%, so I really think it's something I can improve in the settings or parameters of ram or vmware is not cloned configuration or something around that.

  If please post and correct me if Im wrong and tell me what I can do!

  Thank you very much in advance.

  I run multiple instances of VMW7.01 every day.

  Most of your performance problems will be your hard drive bottlenecking, I run W7 64 b with a few gadgets that monitor the CPU, disk IO & RAM so I can see when the hard drives work flat.

  In any case of the performance tips.

  If you have the RAM in VM 7.01 Edition, preferences, tab memory. If you have 4 GB RAM to say or to choose before integrate all VMs reserved host RA

  If your don't have the ram then choose the Middle option. and in all cases try to allocate as much ram as you host can. For example on my 8 Gb VM will allow me to allocate more 5990 MB is needed I guess under W7.

  With regard to your guests. Change the settings for the Virtual Machine, use what is recommended for XP you can use 512 MB, processors, I have not really noticed much difference in performance if I allocate 4 cores or a carrot.

  Disk space I allocate a sum say 40 GB to a XP guest, but I leave the disk extend depending on use so it is not allocated in advance disk space. If you click the utilities button you can also defragment hard drive here as well. I don't know how that compares to defragment the guest himself, but if you have a lot of time in your hands, I guess you could try the guest operating system own Defragmenter, then try the Defragmenter utility VM.

  Network Adpaters get better performance if NAT value, if not to communicate with the host to a guest and vice versa using a bridge the package must go down the wire to the router/server and then travel back to the host even if it's the same thread! You will notice more if you use shared folders & bridged.

  On the Options tab of comments, Advanced option, I think, but maybe wrong that this memory Page trimming may create rea/disk writes further that, if you have a slow hard drive in the first place will be just slow it more. This is one of these options that might work for you, or it could slow a little more things up according to specs pc HW host. What you can do if you have more disks is have your guests to reside in a number of disks to balance i/o across.

  These suggestions can be used to both host and guest operating system Windows.

  In the XP Control Panel, System icon, Advanced tab, settings (Performance) button, choose the setting for best performance option. It will take off the ontop of the Basic windows controls MS fancy graphics overlay, so XP will look like for example W2k/ME/98. Also, if you want to run more than one virtual machine at a time in the host the Advanced tab click and change programs at bottom Services.This time slicing CPU so more time CPU is shared with anything else instead of saying 70% of the time CU are accessible for the currently running program. That's what I run on my W7 host because it passes more easily then. Change use of Programsto system Cache memory to agree that it is more dependent of HW. Finally let windows manage its own virtual memory for optimal performance.

  Other things to consider is the indexing disc, view the properties of your hard drive and turn off disk indexing, well as its only supposed to throw to rest its always something else to slow down your machine with as well as other unnecessary programs that run as a service or an application next to the system clock.

  Finally, make sure that your AV scanner comments VM files.

  I think that kind of covers most of the settings, but I'm sure others will know of others.

  Good luck!

• Client VMWare Horizon on El Capitan

  MacBook Pro 15 ", mid-2015, retina 2.2 GHz Intel Core i7, 16 GB RAM, 256 GB SSD

  OS X Version of El Capitan 10.11.2

  I use the Client VMWare Horizon (version 3.5.2) to connect to business desktops VDI.  I have a number of questions.

  -VDI desktop consumes all connected screens, either 1, 2 or 3 screens.  I find no way to assign the VDI Office to a single workspace or monitor.  I use the Macbook screen, a connected HDMI monitor and a connected via a bolt of lightning to the DVI adapter.

  -The customer seems to disconnect when the Macbook goes to sleep.  But it is not always log out properly.  More than once I have been unable to restart the desktop computer without the intervention of my sys admin

  Finally, and this isn't a VDI issue per se, when I connect my Macbook to the company via Ethernet or wireless network, I'm just flat impossible to print only printers on the network of the company.  The Mac is not joined to the domain, is unable to see all printers, and I roll the printer add by hand.  I am able to define a printer by IP address or FULL domain name, but all attempts always results in the printer print code Postscript and not the print job.  This is the enterprise-class printers Ricoh.

  Any help would be appreciated in any of these questions.  Thank you.

  I found the New Horizon customers are less than optimal.  I returned back all the way to the customer display, as a preference, because it seems to stay connected more, better and with less issues, plus the customer of the Horizon. Currently using the client to view v1.6... Fortunately.

  Printers - I put all my users up on top of the basic intellectual property. Very few questions.  Users/Macs are members of a domain and are associated with the hard cable, but do not use the MS Print servers. In one or two cases, I used Hello for some high-end HP or printers Ricoh.

• VMware Horizon 3.3.0 - slow when it is launched from a machine virtual (WS2008 R2) - all solutions?

  Hi guys,.

  We have an installer of VMware Horizon which works fine when accessed from our laptops.

  However, for several reasons, we also this environment accessible from a Windows Server 2008 R2 computer that resides in a virtual machine on a hypervisor.

  But the problem is that it is very very slow at the launch like this (you can feel the delay in cursor of mouse or when you open a window on the machine of Vmware View published). I want to clarify that the connection to the client VM (WS2008R2) is made through RDP.

  The questions that I have since I'm not able to find out so far are:

  (1) is x 86-64 catches WS2008R2 supported as a client? A Client of Horizon install VMware on it different in any way on a Windows 7 computer?

  (2) is the fact that he is virtualized to the cause of the slowness? If so, why is that and can do something about it?

  Thank you very much, I really appreciate your help.

  Jay.

  OK, he solved it myself

  It seems to the "Control Panel > mouse Options > pointers > scheme ' the 'Windows - Aero system' has been selected. The second I put it to zero, the cursor of the mouse began to behave and he moves normally.

  Jay.

• Horizon Workspace Remote Authentication App

  Hello

  I get the message inside my VDI-Horizon-Workspace of Win7 User Portal: "for safety, this remote application requires enter your username and password to start."  This isn't your RSA SecureID password. »

  I have Kerberos enabled successfully using the secondary connector - goes for SINGLE sign-on, so when I run the "Open VMware Workspace web page" it authenticates me on my portal user automatically, but when I click on an icon of the hosted application I get the above message.  IF... I provide my credentials once I am able to launch applications of law for the duration of the browser session.  Once I have close this window/session and start another "web page opened workspace of VMware", I then repeat the process of supply credntials.

  I'm under Horizon Workspace 2.0 with Horizon 6, settings policies, and authentication by default on the gateway - will (FQDN).  All SSL certificates are in place and trusts for the vApp/vCenter/view.  The time on the vApps/View/vCenter/RDSH/VDI are synchronized.  I have three hosted applications and everything works normally, once that submit the name of user and password or directly launched from the Horizon view Client.  Any thoughts?  Thank you.

  Matt

  This works as expected. You will need to provide your password once per session capable of launching of the resources of the Horizon (computers desktop and applications). As you connect to the portal and workspace using kerberos, you are being prompted to enter a password on the first launch of the Horizon resources. If you connect to the workspace portal using the name of user and password, you don't need to re-enter your password.

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• change ip address ACS on the vmware platform.

  Hi netpro,.

  Anyone who has experience or share with me this work and generate a fecalith?

  Question: ACS 4.1 installed on the vmware platform which used ip 172.17.10.200 address. so if I was able to change the IP without re - install / formatting of the ACS. It work?

  your answer will be highly appreciated.

  Thank you.

  Kind regards

  Jackal

  All network adapters on the computer that is running ACS must be enabled. If a network adapter is disabled, the wrong IP can be selected and ACS installation can move slowly, because of delays caused by Microsoft CryptoAPI.

  Note that we tested ACS on computers that have only a single network interface card.

• Three questions about the version of the hardware and VM tools

  Hello

  I have 3 questions about equipment and tools of VM version, can someone help? Thank you in advance.

  1. is the machine hardware version virtual file OVF/EGGS associated with?  OVF/EGGS exported vSphere files contain the virtual hardware version information?

  2. review I have a VM in vSphere 6.0 platform with version 11 of hardware and the latest Tools (cam with ESXi 6.0 U2) VM, I can export to an EGG file, then import it on vSphere 5.1 platform? If can, what version of the target material is VM?

  3. can you vmtools high version with lower vSphere platform? For example, I have a virtual machine with version 11 of material and tools the latest VM (ESXi 6 U2), later I move the 5.1 ESXi virtual computer, should I go down the vmware tools? Is there a compatibility issue?

  Hello

  1. Yes, if you unzip the eggs and open the FVO in an editor you see:

  Family of virtual hardware

  0

  VMX-08

  2. you can not. Vmware 11 material is not supported by 5.1.

  3 didn't cause you cannot import vmware 11 and 5.1. Works may be more high vmtools as long as you keep the material support for 5.1 version.

  

  Best regards

• Support for Ubuntu 14.04(x64) - Client VMware Horizon for 64-bit Linux

  I tried to install skyline view on my operating system 64 - bit Ubuntu 14.04 and then discovered that it was not yet supported.  It's on the roadmap to be supported quickly?  It would be really nice to have it working on my Linux laptop.

  edwinn,

  Looks like the media is just around the corner: "what flavors of Linux are supported in the first release of Horizon 7 for Linux? A. Ubuntu 12.04 and 14.04, Red Hat Enterprise Linux (RHEL) 6.6 and 7.1, 6.6 CentOS and NeoKylin 6 Update 1 (Chinese), SUSE Linux Enterprise Desktop 11 SP3 are supported with Horizon 7 for Linux. »

  https://www.VMware.com/files/PDF/products/horizon/VMware-horizon-for-Linux-FAQ.PDF

  This should mean Q1 2016.

  Lars