horizontal and vertical guides do not stay in place

Similar Questions

• AI CC, horizontal and vertical guide lines disappear when aligning

  Hello

  I think I'm exactly as shown. I work with the rules and guidelines. My goal is to start from the upper left corner of the document (white Virgin) and drag the horizontal and vertical guidelines at the same time. Then I press Ctrl + R to hide the ruler guides, use the black arrow to select the guides that intersect (they turn blue), and align the center of vertical positioning. They should then be centered horizontally and vertically, but they disappear completely. I rebooted HAVE him, but that did not help. Kindly help, if I'm having trouble with this... Geez!

  Thanks in advance,

  Janice

  I experienced this with someone a few months ago, and we understand that they are no longer work as expected. After that you align the guides by following the steps you sketched out, zoom all the way (control-) until you can see the full editing table. They are way out of your sight.

  As an alternative, until it works again, note the height and width of the artboard and divide by 2. Use the numbers that result to position the guides manually.

• Both horizontal and vertical tabular of freezing...

  Hello

  I use Apex version 4.2.6... In table form, I need to freeze the column headings (horizontal gel) as well as the lines of the columns (vertical gel),

  I tried for vertical gel well come... But I don't know about header freeze... is it possible to freeze both in tabular form? If Yes, then please guide throw me it

  Thank you

  Infantraj.A
  

  Hi Infantraj,

  Infantraj wrote:

  I use Apex version 4.2.6... In table form, I need to freeze the column headings (horizontal gel) as well as the lines of the columns (vertical gel),

  I tried for vertical gel well come... But I don't know about header freeze... is it possible to freeze both in tabular form? If Yes, then please guide throw me it

  Here is the post from blog by Jari wool, where he showed both freeze headers and freeze columns in the classic report:

  http://jaris.blogsite.org/Apex/f?p=blog:read:0:article:303800346302715

  Just download the sample application provided by Jari, upload it to your environment and use it to tabular form (as classic and as a report for the most use of the same model, i.e. the Standard). You can see the working example as well.

  Years ago, I did both the horizontal and vertical gel by twisting Jari earlier blog post.

  Reference: Re: how to freeze report tabuar headers and forms in APEX 4.1

  I hope this helps!

  Kind regards

  Kiran

• [SOLVED] Headers of columns (horizontal and vertical) Center

  Hello.

  I use JDeveloper 11.1.1.7.0

  I need to center headers of columns (horizontal and vertical), a < af:column... > classic within a < af:table >

  It is very important that one header is centered. The content could be left, Center or right-aligned.

  I tried this solution to another thread (alignment of the column header in the table of the ADF in the Center), but it does not work:

  <f:facet name="header">
      <afh:rowLayout>
          <afh:cellFormat halign="center">
              <af:outputText value="column header"/>
          </afh:cellFormat>
      </afh:rowLayout>
  </f:facet>
  
  

  Any suggestion? Thank you

  The solution is for JDev10g.

  Have you tried the alternative

  Set the align of af: column in the Center, it aligns the header and the data at the same time in the Center, if you only want the header to the Center, the inlineStyle value ' text-align: left;' in addition to the align property

  Timo

• horizontal and vertical flip of an image

  I duplicated old color slides by taking pictures of them with a macro lens. I only shot raw files, not jpg additional in order to save storage but otherwise to keep the range of post-processing possible. Worked well but the photos should be horizontally and vertically returned. Is it possible to LR4.4 automatically.

  To check all the images, then choose "horizontal reversal" only works on the first of the images activated.

  You can make several photo flips to develop if you enable automatic synchronization.  Just make sure to turn it off because it can cause all sorts of accidental damage

  

• How can I recover the functions drag horizontal and vertical to center the portions of the image being developed? [was: Question]

  How can I recover the functions drag horizontal and vertical to center the portions of the image being developed?

  1 - question double deleted

  2 the name of the program you are using then a moderator may move this message to the correct program forum

  This forum Cloud is not on the program problem... help a program would be Photoshop Lighroom or Muse or?

• Horizontal and Vertical alignment / webcamSub

  How to control the alignment, horizontal and vertical of users within the webcamSub?

  Here is the result with the old and the new ACC webcamSub.

  

  

  Thank you

  Bernard

  Hi Bernard,.

  Sorry fot the inconvenience - part of the webcamsubscriber, we made a few changes to the layout system, in order to make them easier to control. So it is perhaps not as good in guessing the page layout that you want to automatically, but you will be much more easily able to force them to do exactly what you want.

  Here is the new property added to webcamSubscriber:

  usersPerRow:int[read-write]

  
  

  Specifies the number of the user to display per line in the webcamsubscriber videos. Once the number of videos to display exceeds this number, a new line is created with videos of excess. By default, 4. For a horizontal long band, this game at a high number - to a vertical strip, put on a low number.

  For your case, simply set usersPerRow to 1, so this will lay vertically.

  hope that helps,

  Nigel

• Text in centered DIV horizontally and vertically.

  I made a bar of simple navigation at the bottom of a site that I am building and had it centered horizontally and vertically.  When I pulled the top of the page now the text is completely to the left and I had no problem with him the day before. I made no changes to the code. I use IE9, but I've been since I started this site. Everything looks fine in Firefox. If I approached IE9 compatibility mode, it is centered horizontally but not vertically. Any ideas?

  http://www.toddsshowcase.com/

  http://www.toddsshowcase.com/styles/stylesheet.CSS

  Just add height: 90px; and line-height: 90px; to your 'bottom_menu' of the selector css (as shown below)

  {#bottom_menu}
  text-align: center;
  Width: 974px;
  margin: 0px auto;
  Clear: both;
  height: 90px;
  line-height: 90px;
  }

  Normally, I would not recommend the definition of a height on a

  that contains text, BUT in this case there are many possibilities be accommodated the text should zoom to the end user in two or three times.

• How we split the screen for different horizontal and vertical divisions

  Hello
  
  How we split the screen for different horizontal and vertical divisions. I can't use panelSplitter because I need fixed screen and not the division which is movable/sliding. I tried inlineframe, but which fails because you cannot use forms, other trees components... :(
  
  so I would like to know how to do division without panelSplitter.
  
  Thanks in advance,
  Jyothi

  Hi Jyothi,

  If you set the panelSplitter attribute disabled to true, the delimiter becomes permanent/mobile no.

  Kind regards
  Amélie Chan

• Windows Vista SP2 fails to install and Windows Firewall will not stay

  Hello, I have problems with Vista 64-bit, it will not install service pack 2 and Windows Firewall will not stay. I tried to manually enable ICF manually and it won't turn. It gave me error 6x9D. I ran several antivirus scans malware byte and pc cleaner pro 2012 and the issue has not been resolved. If I could get help would be much appreciated. Thank you

  Hello

  What do you use for security?

  If you are using an Internet Security Suite, it will have its own firewall and disables the default Windows Firewall.

  And you should have only one firewall to avoid problems related to the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You have not installed SP1?

  If so, try a direct download of SP2.

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• How to get the angles of view (horizontal and vertical) camera?

  How to get the angles of view (horizontal and vertical) camera?

  The horizontal and vertical field of VIEW properties are available with the camera_get_physical_property() function.

  Who is using the C API of the photo. I don't think that you can access by using the control of the camera of Cascades.

• Is it possible to do a slide show or a presentation without the discoloration (and l horizontal and vertical) so no transition at all?

  Is it possible to do a slide show or a presentation without the discoloration (and l horizontal and vertical) so no transition at all?

  (I want my dog to "run" more easily through the Web page in a slide show very fast)

  Hello

  You can set the transition to one of the three options available (bland, vertical and horizontal) and set the speed of transition to "0". This would remove all kinds of your slideshow transition effects.

  Please refer to this screenshot:- http://prntscr.com/4rdaqm

  Hope this helps

  Kind regards

  Rohit Nair

• Satellite 2450-201: monitor does not stay in place?

  Hi guys of

  I just wanted to know if anyone has a problem of monitor loose were the rear monitor folds and does not stay in place and is there a simple solution? Or this happens over time?

  Thank you

  Hello

  It sounds like a problem of mechanics monitor on you laptop.
  I don t think that you will solve this problem without any help from the technical person.
  I recommend you contact Toshiba service in your country. Explain the situation and I'm sure he will find a solution.

• Logo do not stay in place.

  I was recently invited to work on a website for someone using Muse.

  How ever that I stumbled upon a pretty annoying problem.

  The logo does not stay in place. I have the logo on the layer 'menu', everything in the menu layer stays when you scroll but the logo... any idea?

  Miller Agritec Inc. <-c' is the website originally

  Miller Agritec Inc.. <-c' is the new redesign.

  Hello

  Have you tried the option 'show '? It is in the toolbar at the top.

  Select the logo image, and then select one of the points in the icon.

  It looks like this:

  

  I hope this helps.

  Concerning

• Synchronization horizontal and vertical refresh for Satellite M55

  Hello.

  I have a M55 - S135 laptop (Satellite) and I'm trying to find the horizontal sync and vertical refresh rate so that I can configure X on my Linux distros. I am running Slackware 12.0 and Xubuntu 7.10 now. X works fine on both of them, but I want to refine them.

  I called Toshiba tech support, but I have not learned anything on their part. The [page that contains detailed specifications | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modelLanding.jsp?ProductMenu_0=Portables&Pro ductMenu_1 = Satellite & model_find = & ProductMenu_2 = 104 2101 & me = 1042101 & rpn = PSM50U & smoid = true & ct = MH & List Type model = & x = 25 & y = 20] does not help. Does anyone know of a way I can find these two rates? Or someone get to know them?

  Thanks for any help.

  Do have to do some special settings?
  Because
  * sudo dpkg - reconfigure - phigh xserver-xorg *.
  do the job easily.