Satellite 2450-201: monitor does not stay in place?

Similar Questions

• Dell monitor does not stay on

  * original title - my monitor does not work *.

  OK so I bought this computer about 4 years ago and it worked just fine until when I tried to turn it on this morning it does not turn on. Then I tried again and it was the case, then half an hour later he died. After that, I tried to put it on the back again but this time, when I press the button it lights but when I let go of it, it turns off the coast. I tried unpluging but it does the same thing.

  My Dell flat screen monitor

  The computer does not work

  Also I umpluged computer from the monitor and the same thing happened

  Help, please

  Hi Uther 9,.

  If the monitor does not remain during the self test, it is defective.

  * Turn off the monitor
  * Remove all cables from the computer monitor
  * Turn on the monitor
  * The floating red/green/blue/white dialog box should appear on-screen on a black background and stay on

  However, it seems that you already have, is most likely a hardware problem:

  http://support.Dell.com/

  Thanks and good luck!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite C660D - internal monitor does not

  Hi guys

  I plugged an external monitor to my Satellite C660D win 7 64 bit laptop computer and the Council on screen no longer works

  I went to the monitor settings and could not find the edge monitor restarted without the ext monitor and he started very well, but with no display. Restarted again with the post office and mail monitor is what I have to work with re installed win 7 and the same problem exists is the rotated motherboard or is it a setting

  Andy39
  help please

  Hello

  Usually, you can switch between the internal and external screen using FN + F5 key combination

  Try it! Perhaps out of the display is set to an external monitor only.

  But you see something on the internal display when the external monitor is NOT connected?
  Some image of the Toshiba start screen or the notes of the BIOS?

• listener does not stay in place

  Hello. Sorry for my English casting.
  
  I have installed the database, but my interlocutor cannot follow:
  
  [oracle@vmvitor admin] $ sqlplus / as sysdba
  
  SQL * more: Production of liberation 11.2.0.3.0 Sat Mar 31 12:43:33 2012
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL > select * from v version $;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  PL/SQL Release 11.2.0.3.0 - Production
  CORE Production 11.2.0.3.0
  AMT for Linux: Version 11.2.0.3.0 - Production
  NLSRTL Version 11.2.0.3.0 - Production
  
  SQL > quit
  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  [oracle@vmvitor admin] $ cat/etc / * release
  Oracle Server Linux 6.2 version
  Release of Red Hat Enterprise Linux Server 6.2 (Santiago)
  Oracle Server Linux 6.2 version
  [oracle@vmvitor admin] $ uname - a
  Linux vmvitor.localdomain 2.6.32 - 220.el6.x86_64 #1 SMP Wed Dec 7 10:41:06 THIS 2011 x86_64 x86_64 x86_64 GNU/Linux
  [oracle@vmvitor admin] $
  
  
  lsnrctl start $ [oracle@vmvitor admin]
  
  LSNRCTL for Linux: Version 11.2.0.3.0 - Production March 31, 2012 12:40:48
  
  Copyright (c) 1991, 2011, Oracle. All rights reserved.
  
  From /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr: Please wait...
  
  TNSLSNR for Linux: Version 11.2.0.3.0 - Production
  System settings file is /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
  Log messages written to /u01/app/oracle/diag/tnslsnr/vmvitor/listener/alert/log.xml
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=vmvitor) (PORT = 1521)))
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
  Beginning of March 31, 2012 12:40:50
  Uptime 0 days 0 h 0 min 0 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora file
  The listener log file /U01/app/Oracle/diag/tnslsnr/vmvitor/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=vmvitor) (PORT = 1521)))
  The listener supports no services
  The command completed successfully
  [oracle@vmvitor admin] $ lsnrctl status
  
  LSNRCTL for Linux: Version 11.2.0.3.0 - Production March 31, 2012 12:40:57
  
  Copyright (c) 1991, 2011, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Linux error: 111: connection refused
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=vmvitor.localdomain) (PORT = 1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Linux error: 111: connection refused
  [oracle@vmvitor admin] $ ps auxww | grep-i lsn
  Oracle 11098 0.0 0.0 103292 900 pts/0 s + 12:41 0:00 grep-i lsn
  [oracle@vmvitor admin] $
  
  
  Any help?

  Thank you, you have helped many... :) (sarcasm)

  And I solved the problem... TIP: it's a 6.2 OEL config

• Logo do not stay in place.

  I was recently invited to work on a website for someone using Muse.

  How ever that I stumbled upon a pretty annoying problem.

  The logo does not stay in place. I have the logo on the layer 'menu', everything in the menu layer stays when you scroll but the logo... any idea?

  Miller Agritec Inc. <-c' is the website originally

  Miller Agritec Inc.. <-c' is the new redesign.

  Hello

  Have you tried the option 'show '? It is in the toolbar at the top.

  Select the logo image, and then select one of the points in the icon.

  It looks like this:

  

  I hope this helps.

  Concerning

• SD 2 GB card is not readable on the Satellite 2450-201

  I have a satellite 2450-201 with a slot for sd card, when I insert a kingston 2 GB sd card it read doesn´t.
  What could do?
  The sd card Don t have a problem.
  I think that something the perhaps pilots is an upgrade, but I can´t find it anywhere.

  Post edited by: alcoolpuro

  Hello

  You are right. There is no update available. At the moment where the device was on the market, the card 2 GB SD was not available.

  This device is very similar with 5200 Satellite and you can try to use the SD card of her driver. It should be version 2. 0 2. I really don? t know if this can help, but you can try it.

  Otherwise, I really don? t know what you can do about it.

• CPU upgrade in Satellite 2450-201

  I have a Satellite 2450-201 and it came with a pentium 4 2.4 GHZ.
  What CPU will be compatible? Pentium 4 3.6 GHZ maybe because there is P4.
  Will this work?

  Hello

  To my knowledge the Satellite 2450 series was delivered with an Intel Desktop Pentium 4 processor.
  The desktop Intel Pentium 4 CPU with Intel SpeedStep® technology and processors to run at one of the following speeds:

  2.26GHz / bus speed: 533 MHz
  2.4 GHz / 533 MHz
  2.53 GHz / 533 MHz
  2.66 GHz / 533 MHz
  2.8 GHz / 533 MHz

  Additional info:
  The processor incorporates a 12 KB of L1 cache and 512KB L2 cache memory memory.

  But as far as I knwn Toshiba does not support updates. You have no guarantee that it will work properly

• Satellite 2450-201: Wi - Fi 802.11 g MiniPCI module

  I am looking for a WiFi 802.11 g MiniPCI card (Mobile Satellite 2450-201). There is no such product Options & "Accessories" section.
  I wonder if my laptop will cooperate with WiFi MiniPCI module to another provider.
  Does anyone have experience with that matter?

  I m not sure on this subject. My colleague also had a series of Satellite 2450 laptop and I wanted to improve with Wifi.

  Because the Hotline could also did not he say anything on this subject. He buyed year USB Wifi Stick.
  And it was not so vast as a Mini PCI card!

  Hope that help you a bit

  Good bye

• Satellite 2450-201 and the Installation of XP SP2

  Can someone tell me why I can't install SP2 on my laptop? I even tried using the original CD of Microsoft, windows, corrupt and does not have anything else to safe mode. I restored my PC and turned off the automatic updates as I can not on this problem. Why the Satellite 2450-201 does not support XP SP2? (I read this on the Toshiba site)... PLEASE HELP THIS IS SO FRUSTRATING

  Post edited by: Fiona Baker

  Hi Fiona

  I really put t believe that the installation of SP2 is not possible (not supported). Can you please send the link of this page?

  I have installed SP2 on older models that your without any problem. Can you please explain what exactly happens when start the installation of SP2?

  If you want you can preinstall your device using the recovery media and then install SP2 immediately.

• Re: Satellite 2450-201: WLan reconnects if driver GPU has been installed

  Problem just second hand laptop laptop that Toshiba Satellite 2450-201 to the format.
  Everything works fine. Then when I load the drivers for graphics (nVidia gforce 4 420 Go) my Intel pro wireless 2200bg wireless grave card and does not recover.

  Turn off the graphics card works OK wireless again.

  Someone at - it ideas please

  I would like to know if you have used a page of the Toshiba driver graphics driver and if the WLan Intel card is up-to-date?
  WLna card driver can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/

• Re: Satellite 2450-201: insert system disk and press a key

  Hello

  I have a satellite 2450-201 my hard drive failed and I bought a new one.
  I went to do the installation of the OS that worked very well and cancelled before that I had to commit that I had to get out.

  Tried again and it wouldn't boot from the CD it kepps showing the insert system disk and press a key.
  I have attached my external, a drive with a boot in drive but no difference what I am doing wrong?

  Mark has soon

  Looks like you can't boot from the CD.
  The message insert system disk and press any key any appears because the laptop can not find any operating system and bootable CD.

  Try to insert an original Windows CD and try to press F12 immediately after that laptop was on the F12 key should activate the start on-screen menu.

  Check it!

• Satellite 2450-201: how to increase the video memory from 32 to 64 MB?

  Can anyone help? I looked in the Bios and the advanced settings screen, and found nothing to increase the size of the video memory.
  Any other way to find on my Satellite 2450-201

  Hello

  As far as I know that the unit has been delivered with the NVidia GeForce4 420Go 32 MB graphics card. This isn't a memory sheared graphics card.
  The card supports the own memory and not a function of memory sheared.
  In this case, you cannot change the value of memory.

• Satellite 2450-201: USB 1.1 instead of 2.0 controller

  I formatted the hard drive on my Satellite 2450-201 and loaded Windows XP SP2. I loaded all the drivers from the disk utilities and everything works well except the USB ports work only in 1.1 instead of 2. There is a yellow exclamation point in device on USB controller Manager. I tried a Toshiba download driver but there is nothing available.
  Can someone suggest a soloution to this problem.

  John

  Hi John

  As far as I know that there is no driver for USB controller. When you install the chipset driver all USB ports should be recognized correctly. Exclamation mark in Device Manager is an indication that the device is not configured correctly. Try to remove the controller and reboot the device. After this check again in Device Manager.

  Some external device is connected to the unit by USB ports?

• Need new hinges to Satellite 2450-201

  The hinges on my * Satellite 2450-201 * are turned away.
  Are the hinges on the - 101 previous model the same i.e. P000368300 and P000368310 and if so, are still available. If not, can anyone advise please.
  Any info gratefully received.

  Hello

  I think you should get in touch with a local ASP (partner).
  The ASP can help you order the right parts.

  Because this laptop is an oldie, I doubt that you get these pieces from an online retailer
  However, google may provide you with some offers if you are looking for unique part numbers

  In any case, all the possible parts could be ordered in service partner as I said above, for me, it looks like an easier way to get these parts.

• Satellite 2450-201: impossible to format SD card 4 GB card

  Hello

  IA´m an owner of Satellite 2450-201 and I have a big problem.
  I just bought a 4 GB SD memory card and Nice, it adapts to the side slot on my laptop.

  This is the first time using the memory card, so a needs-to-format window appears when I try to access.

  The window has the right information: 3.78 GB, Fat32,...

  I click 'OK' and informs the Windows (XP SP2): impossible to complete format (here is Portuguese, then it is translated into English)

  If the correct size is informed, 3.78 GB, why windows can't format it?

  My laptop is virus and spyware free (only 23 spots in the running and supervision), I have SP2, Bios (most recent) 1.50, SD my controller drivers is up to date (the last and the only one that was released in 2003).

  Also tried third party "Panasonic SDFormatter 2.0". He reports the (physical) unit or the mem SD stick is not compatible with the program. And the same effect occurs: the Sd device lost the nice icon and I need to remove/insert the SD card to see again the same story.

  Help me please, friends.

  Hello

  It of very strange that you re possible to see the plugin SD card. Some people suggested that this SD card supports only 256MB, 512 MB cards and more with no MMC support.

  I put t know if you have a format utility Toshiba SD card installed on the laptop, but on many notebooks of utility such Tosh is preinstalled and could be used for formatting of the card.

  According to some poster in this forum the Portege M400 utility format could handle 2 GB, but not sure about 4 GB SD cards.
  If possible, you can try to install this utility on your laptop, but you know you don't have much chance that it works.

  I think that in this case only an external SD card reader will help you.