Horrible rendering on Linux with JDK8

Similar Questions

• Clock and hw external trigger with USB-6210 on Linux with NOR-DAQmx Base?

  I have two devices USB-6210 I need to synchronize so that they both collect data exactly at the same time. I was told by support OR I can send the clock off Dev1/PFI4 and have the two USB-6210 s read the clock in through their own PFI0. I also want to trigger data collected for each device by sending a trigger off Dev1/PFI6 and have two devices to receive the signal on PFI2.

  All my attempts to try this are filled with error messages and my research online seem to say that's not possible with USB devices on NOR-DAQmx Base 3.4.0f2 on Linux.

  I "ve tried using example AI programs and those who do not seem to work either for external clocks. Here is the code I tried:

  #include "NIDAQmxBase.h"#include 
  
  #define DAQmxErrChk(functionCall) { if( DAQmxFailed(error=(functionCall)) ) { goto Error; } }
  
  int main(void){    // Task parameters    int32       error = 0;    TaskHandle  taskHandle = 0;    char        errBuff[2048]={'\0'};    int32       i;
  
      // Channel parameters    char        chan[] = "Dev1/ai0";    float64     min = -10.0;    float64     max = 10.0;
  
      // Timing parameters    char        clockSource[] = "/Dev1/PFI7";    uInt64      samplesPerChan = 1000;    float64     sampleRate = 10000.0;
  
      // Data read parameters    #define     bufferSize (uInt32)1000    float64     data[bufferSize];    int32       pointsToRead = bufferSize;    int32       pointsRead;    float64     timeout = 10.0;
  
  printf("Calling CreateTask...\n");    DAQmxErrChk (DAQmxBaseCreateTask("",&taskHandle));printf("Calling CreateAIVoltageChan...\n");    DAQmxErrChk (DAQmxBaseCreateAIVoltageChan(taskHandle,chan,"",DAQmx_Val_Cfg_Default,min,max,DAQmx_Val_Volts,NULL));printf("Calling CfgSampleClkTiming...\n");    DAQmxErrChk (DAQmxBaseCfgSampClkTiming(taskHandle,clockSource,sampleRate,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,samplesPerChan));printf("Calling StartTask...\n");    DAQmxErrChk (DAQmxBaseStartTask(taskHandle));printf("Calling ReadAnalogF64\n");    DAQmxErrChk (DAQmxBaseReadAnalogF64(taskHandle,pointsToRead,timeout,DAQmx_Val_GroupByChannel,data,bufferSize,&pointsRead,NULL));
  
      printf ("Acquired %d samples\n", pointsRead);
  
      // Just print out the first 10 points    for (i = 0; i < 10; ++i)        printf ("data[%d] = %f\n", i, data[i]);
  
  Error:    if( DAQmxFailed(error) )        DAQmxBaseGetExtendedErrorInfo(errBuff,2048);    if(taskHandle != 0) {        DAQmxBaseStopTask (taskHandle);        DAQmxBaseClearTask (taskHandle);    }    if( DAQmxFailed(error) )       printf ("DAQmxBase Error %d: %s\n", error, errBuff);    return 0;}
  

  When I run the resulting program, I see this:

  $. / acquireNScans-ExtClk
  The CreateTask call...
  Call for CreateAIVoltageChan...
  Call for CfgSampleClkTiming...
  Error-89136 DAQmxBase: route specified cannot be satisfied, because the hardware does not support it.

  For example, a clock and a trigger can be imported via one of the PFI lines by using a USB-6210 on Linux with NOR-DAQmx Base? A clock and a trigger exportable via one of the PFI lines?

  If so, does anyone have the code example illustrating how to do this, or can you at least tell me the names of the lines ("PFI0/Dev1" or other) so I can try again?

  Clues or suggestions would be helpful.

  Thank you

  -Tom

  The clockSource in the example specifies an output rather than an input channel channel. Change source "/ Dev1 / PFI0" solved the problem.

  Please close this post.

• How can I replace a SUSE Linux with a Windows 7? HO Notebook 680

  Hello! I had a new HP Notebook 630. the problem is that it works in SUSE Linux 11, and I don't know anything about. I have always worked with Windows and it is the only operating system, I can use. so please tell me how can I replace the SUSE Linux with a Windows 7?

  Hello

  Looks like you have to buy a Windows license. You can buy online but my suggestion: buy from a reseller of software, you can have a DVD to keep.

  Good luck.

• HOWTO add properties custom for redhat linux vm after 'Clone, Linux with a single NETWORK card.

  Hello

  How can we add the custom properties to a new linux vm after clone of model with the vco workflow?

  Something like ' / bin/echo x.x.x.x >/etc/newfile ", run this with sysprep or something (not ssh) inside the new VM for linux with a vco workflow.

  
  Someone at - it an idea about it?

  Thomas

  If you can't get it by sysprep, you can use the VIX plugin for vCO to run a command in the guest OS once it is deployed and under tension.

  http://labs.VMware.com/flings/VIX-VCO

• upgrade R12 on linux with vmware

  Please let me know, if someone uses R12 on linux with vmware.
  Let me know the face/questions of risk during the upgrade.
  
  If he has a few known issues also please list down.

  Salvation;

  Have thanks for your reply, you found problems during upgarde or after the upgrade.

  I already have several times 10g and 11g update and also to make a r11 r12 upgrade and also bring some r12.1.1 to the r12.1.2 wihtout any problems

  Also check out my blog, you will see all my installation on VMware guide
  http://heliosguneserol.WordPress.com/category/step-by-step-Oracle-e-Business-Suite-installation/

  Respect of
  HELIOS

• 10g RAC on Linux with vmware - time synchronization problem

  Hello
  
  I installed 10g RAC on Linux with vmware server 1.0.5 on my machine.
  
  I knew that the time on the two nodes of the rac is different and goes out of sync.
  
  I set the time on both nodes, but after an hour, they are not synchronized.
  
  Their time is different with the time machine.
  
  Is there a way to put the two nodes at the time of synchronization with the time of the machine?
  
  Thank you
  Drane

  Hi drane

  Yes it is possible by the parameters of a time server ntp or get your servers synchronized with a time provider ntp.

  See this http://www.vmware.com/appliances/directory/210

  www.VMware.com/PDF/vmware_timekeeping.pdf

  Published by: Hub on November 12, 2008 14:22

• Using smart rendering under Windows with DNxHD intermediate format.

  I am trying to use effectively the smart rendering on Windows 10 w/latest first. The media entry comes from a Canon EOS 70 d, video shot at 24 fps ALL I have 1920 x 1080.

  My understanding is that I can maximize time encoding by matching the media entry for the output format. By example, if I transcode my Canon is ALL I have footage of DNxHD, I can then put to use sequences found that satisfy the DNxHD, and makes export/encoding of DNxHD super fast, especially if previews exist in DNxHD. I also understand that H.264 is not supported for previews, because it is not reasonable for first and previews format and how they would need be used as output format.

  OK, so I've created which but the usefulness of the workflow in certain circumstances is unclear to me... my goal is to speed up the encoding of video files that I can look at to evaluate where I am in my project, perhaps throughout the day or especially at the end of an important part of the editing work. I used always to create a version of test coded of my project using Ctrl-M or File/Export/output for typical mp4 H.264 files Media. As I understand it, maybe it's not desirable for rapid assessments of the project because the coding may take much more time. My understanding is that in defining the format of sequence overview to match my intermediate format, and using File/Export/Media (CTRL-M) to encode in DNxHD format even, I can greatly speed up the encoding.

  In short, it seems that I am to convert my Canon all THE-I of DNxHD since DNxHD is supported by Adobe sequences in an overview format... This aligns my "edit mode" sequence for DNxHD, where I maintain previews in the same format. I can then CTRL-M encode with "Match sequence settings" to maximize the throughput where two cutscenes DNxHD or preview images DNxHD, emitting the same... the same output format DNxHD...

  That seems to work, things are going faster, but we don't know what I'm supposed to do with the .mxf resulting in some cases that limit the flexibility I had in broadcasting in mp4...

  I mean, is that mxf is a container, I can not play easily on my cell phone or similar, so for the assessment of a project, it seems not usable as a flexible way as an mp4. Even on my desktop, without having to install any other software not Adobe, I can't see a mxf without import in first and viewing in the monitor. It's not horrible, but in this case, I'm just using first as a Media Player for the mxf, he created and which leaves me thinking that I could just pre-made and play the main sequence directly, what is the difference?

  While I'm working on a project, I sometimes, as code it where I can play back a coding of all the days of my project on my phone, laptop or desktop, independent of the first. I guess that made smart will only help insofar as it speeds up encoding in h.264 mp4 etc.

  I feel that I can miss a strategy, I can take here...

  My goal: speed up encoding, but have the ability to create every day mp4 assessments or DNxHD output that I can take with me and discovered on my tablet or mobile phone as you want throughout the day (i.e., as I went out and I have a moment to see what my eyes think where I am with my latest edition which I coded the previous day for example).

  Any thoughts on what I could be missing here, or how I can improve how that I consult the best way for me to use smart rendering?

  Thank you.

  I could just go and play the main sequence directly, what is the difference?

  None, so do it.

  My goal: speed up encoding

  Buy faster hardware.

• Why Linux with Mozilla/5.0 (X 11; Linux x86_64; RV:31.0) Gecko/20100101 Thunderbird/31.3.0 Google Calendar dosen't have the same graphics as in WIN?

  The application databases
  Name Thunderbird
  Version 31.3.0
  User Agent Mozilla/5.0 (X 11; Linux x86_64; RV:31.0) Gecko/20100101 Thunderbird/31.3.0
  Profile directory
  Open Directory
  (Local disk)
  Application version identifier 20141128200244
  Permit Plugins about: plugins
  Build configuration about: buildconfig
  Memory usage on: memory

  Incident reports
  ID of the report
  Extensions
  Name enabled Version ID
  Google Calendar tab 3.9 true googlecalendartab@momo
  ImportExportTools 3.1 real {3ed8cc52-86fc-4613-9026-c1ef969da4c3}
  Lightning 3.3.2 real {e2fda1a4-762b-4020-b5ad-a41df1933103}
  E-mail [email protected] true Menu and Launcher unit integration 1.3.1
  Provider for Google Calendar 1.0.3 {a62ef8ec-5fdc-40c2-873c-223b8a6925cc} real
  Important change preferences
  Value name
  Browser.cache.Disk.Capacity 358400
  Browser.cache.Disk.smart_size_cached_value 358400
  Fake Browser.cache.Disk.smart_size.first_run
  Fake Browser.cache.Disk.smart_size.use_old_max
  Browser.Display.foreground_color #000066
  extensions.lastAppVersion 31.3.0
  mailnews. Database.global.datastore.ID 5A 192271-d148-44be-a4a0-c336bb1306f
  mail.openMessageBehavior.version 1
  network.cookie.cookieBehavior 3
  network.cookie.lifetimePolicy 2
  true network.cookie.prefsMigrated
  places.database.lastMaintenance 1416850890
  places. History.expiration.transient_current_max_pages 104858
  true plugin.importedState
  Fake print.print_bgcolor
  Fake print.print_bgimages
  Default print.print_colorspace
  Fake print.print_downloadfonts
  True print.print_evenpages
  True print.print_in_color
  Print.print_margin_bottom 0.5
  Print.print_margin_left 0.5
  Print.print_margin_right 0.5
  Print.print_margin_top 0.5
  True print.print_oddpages
  Print.print_orientation 0
  Print.print_page_delay 50
  Print.print_paper_data 0
  Print.print_paper_height 297.00
  Print.print_paper_name iso_a4
  Print.print_paper_size_type 1
  Print.print_paper_size_unit 1
  Print.print_paper_width 210.00
  Default print.print_plex_name
  Default print.print_resolution_name
  Print.print_scaling 1.00
  True print.print_shrink_to_fit
  Fake print.print_to_file
  Print.print_unwriteable_margin_bottom 56
  Print.print_unwriteable_margin_left 25
  Print.print_unwriteable_margin_right 25
  Print.print_unwriteable_margin_top 25
  Graphics
  Description of the NVIDIA Corporation - Quadro 600/PCIe/SSE2 map
  Vendor ID NVIDIA Corporation
  Device ID Quadro 600/PCIe/SSE2
  NVIDIA Driver Version 4.4.0 331.113
  Fake of WebGL Renderer
  GPU accelerated Windows 0
  AzureCanvasBackend Cairo
  AzureSkiaAccelerated 0
  AzureFallbackCanvasBackend none
  AzureContentBackend Cairo
  JavaScript
  Incremental GC 1
  Accessibility
  0 Active
  Prevent accessibility 0
  Versions of the library
  Minimum version expected Version in use
  NSPR 4.10.6 4.10.6
  NSS 3.16.2.3 ECC base 3.16.2.3 base ECC
  Util NSS 3.16.2.3 3.16.2.3
  NSS SSL 3.16.2.3 ECC base 3.16.2.3 base ECC
  S/MIME 3.16.2.3 NSS ECC base 3.16.2.3 base ECC

  Well more than one GTK or Gnome Linux application compared to say of KDE.

• you are using Linux with Nvidia binary drivers, how can I enable WebGL in Firefox 8?

  I heard it is possible to use WebGL in firefox 8 for linux, if you use Nvidia drivers binary, but I have not found a succinct recipe. can someone point me to a working recipe?

  Thank you!

  You have a WebGL rendering engine listed on the help > troubleshooting information page:

  WebGL Renderer: NVIDIA Corporation -- GeForce 9800 GT/PCI/SSE2/3DNOW! -- 3.3.0 NVIDIA 280.13
  

  You can check the values of the prefs of webgl on the subject: config page via the address bar.

  • http://KB.mozillazine.org/about:config

• What distro Linux with Satellite A200-10W

  What linux distro for use with my laptop A200-10W, which works out of the box (with Nvidia 7300go, wifi and Blootooth)?

  PS. Anyone have experiences with FC8?

  Thank you for luka

  HM, it's hard to say that EACH linux works out of the box. I'll try Ubuntu (the latest version is something with 7. XX) that runs on a Tecra S3 at my home. Some things don't work (sensor for fingerprints, etc.) but most of the stuff (the material) works perfectly Yes, it s upwards will work you system.

  Download from ubuntu.com and start a live CD. You will see how the live CD manages your system, but I think it should work.
  I suggest you to register on some ubuntu forums... you will need. :)

  Welcome them

• Force on GPU rendering wt19i live with walkman running android ics.587

  Hello guys, I have sensations of opinions shared on GPU Force rendering, do I know if it's really improve and what are its benefits? and if I enable it on and then I turn it on it will affect my experience off, I'm not rooted and with blocked booloader on ics officiel.587 by sony, thanks

  It will not improve anything in fact, since apps this will activate when necessary. He is a developer option, used by developers. Having this option can actually cause problems if the apps that don't require not GPU is forced to use it.

  So, my suggestion is that you uncheck the box and keep this way, unless you develop your own app that needs test of GPU rendering.

• How to deploy a rdf on linux with library report attached

  Forms and reports 11.1.2.1

  We develop on windows and deploy on linux.

  We work with rdf files, send them to linux and there they are functioning normally.

  Now, I have a file rdf with a library attached. I opened the file with the windows generator, compile all the save, he brings to linux, but at runtime, I get this error:

  REP-1247 will find no compiled plsql

  The plx is in reports_path.

  Do I have to compile the report to linux?

  I answer myself:

  If you want to have the rdf compiled at run time, you must have the available pll (the plx is not enough).

  So, if you don't want to deploy the pll, you will need to convert the rdf in rep (have the pll at hand at that time of compilation).

• SqlDeveloper with jdk8 bundle?

  Hello

  Is it possible to have these impressive packages of SqlDeveloper / Datamodeller with JDK/JRE, also for newer versions?

  I jumped to SqlDeveloper 4.1 ai2 and amused myself by hacking with cygwin tips etc to get the jdk8 extracted beside the SqlDeveloper in Win7.

  This was due of error dialogs "this program is blocked by group policy..." when you try to install jdk8.

  Because I didn't want to argue the Win7 configurations java driven 'politics of the group' I just have to installation with SqlDeveloper and jdk8 in same home' - directory.

  Otherwise, the installation of the latest version of SqlDeveloper is going very well.

  The absence of the correct jdk in installation package can be real showstopper for many of us.

  rgrds Paavo

  It will be there when the official release is made available.

• Cannot install or run Vmware Player / desktop Linux with gcc5.1

  Hello

  Unfortunately I had to update my system to the latest kernel that has been compiled with gcc 5.1

  I also installed gcc 5.1

  GCC - version

  GCC (SUSE Linux) 5.1.1 20150622 [CCG-5-management 224722 review]

  I still don't it while trying to run vmware

  . / vmware-modconfig - console - install-all

  Unable to get information from the CCG.

  Help, please

  Gruna

  1. CD/usr/lib/vmware/modules/source
  2. unzip vmnet.tar
  3. Vmnet-only CD
  4. do
  5. CD...
  6. unzip vmmon.tar
  7. Vmmon-only CD
  8. do
  9. CD...
  10. CP vmmon.o/lib/modules /'uname-r'/misc/vmmon.ko
  11. CP vmnet.o/lib/modules /'uname-r'/misc/vmnet.ko
  12. depmod - a
  13. restart the /etc/init.d/VMware

• Copy the file of the vco to prompt linux with permissions

  Hello I'm trying to move a Perl file to a Red Hat Linux virtual machine, then run it later by using the file copy of VCO to comments and then run program in comments workflows. The problem I have is that, after the file is on the client, the file does not have the appropriate permissions to run. I tried to put the file on vco before moving, and he did not move with the file permissions. Any of you know how to move the file with permissions?

  Thank you

  You have a few options, I think:

  1. Set execution permission after the file has been moved to the target system, and then run it
  2. Instead of trying to run/path/script.pl, tell perl to call it: perl /path/script.pl

  In both cases above, you should be able to run the script.