Jabber Client several connections problem

Similar Questions

• Client VPN connectivity problems

  I use the cisco VPN client to connect to our network, located behind a 515E. The client is authenticated and gets an ip address but cannot ping or connect with one of the hosts. The connection is to a network of customers that is also behind a 515E. I have successfully connected using the same policy to other places and have had no problem. What confuses me, is that we have used to have a Netscreen firewall before and he had a netscreen vpn client which connected since their network with a problem. Is that something they need for their firewall so that we can get through the traffic?

  Try to turn on NAT - T on your pix, by setting up:

  ISAKMP nat-traversal 20

  and configure the client vpn accordingly:

  http://www.Cisco.com/warp/public/471/cvpn_3k_nat.html#conf_client

  I think these discussions are useful:

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=virtual%20Private%20Networks&topic=General&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd7dda4

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=virtual%20Private%20Networks&topic=General&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd7fe80

• application forms client side connection problem-oracle 11g Server

  I installed the application oracle 11 g 2 on windows 2008r2 server. Installation of Weblogic. All installations were successful. But when the URL for forms running it prompts for the name of user and password and identification of database information. The application seems to be frozen and we have to refresh and again in the authentication credentials several times to get the application connected to... Please give me a solution for this.

  (Version of Java on the client 1.6.0.25 Client os xp/win7/32/64bits version)

  Tried the solutions are (but failed to solve the problem)

  1. change the browser and the version of the browser.

  2. change the java version.

  3. in the paper of the forms it says error fatal client-side...

  [2013 09-17 T 10: 53:52.073 - 07:00] [WLS_FORMS] [ERROR] [FRM-91230] [oracle. . forms servlet] [tid: 11] [username: < anonymous >] [ecid: 0000K4h3dF95qYWFLzQLOA1IE4TU00009y, 0] [SRC_CLASS: oracle. . forms servlet. ] [RunformProcess] [APP: formsapp #11. 1.2] [SRC_METHOD: fromFrmwebToODL] fatal to the RUNNING process error: timeout on the connection to the Java client]

  Hello, I am writing to inform you all to say that I found the solution. In any case, I saw there were some messages saying to change the version of Java on the client side I made, but did not work. But the solution I've found is as explained below.

  There are some parameters in the Java on your computer to be modified in order to use it.

  • Go to the control panel.
  • Select Java.
  • After the control panel opening Java go to move the tag.
  • Disable the Java plug-in to uncheck 'enable the plugin from new generation... '. ' as shown below
  • Apply the changes and restart the browser.
  • URL will work.
  • Recommended for this IE browser

  Post edited by: LasheenMihik

• Unable to connect to presence server Jabber clients

  Salvation;

  I am a newbie in Collaboration and to learn basics who set up a small laboratory including 11 CUCM, presence 11 and two phones 7821 Cisco. I have configured CUCM and presence and set up a SIP trunk between them according to the documents. I tried to configure the client Jabber on Windows, but in vain. first of all, I created some local users on CUCM and have some LDAP users that have been synchronized with a test AD in which both the presence and the CUCM are members of this domain. I set up a local users CUCM for Jabber Client and to configure as follows to configure the Jabber Clients according to the documents.

  My first question is the format of the user name that should be used with Jabber. client Jabber said we use "[email protected] / * /" format, but I saw the videos on the Internet using normal user name and password. regarding the fact that I have configured a local user for the Jabber CUCM, I entered in the form of "username" but Jabber said the format should be as "[email protected] / * /'." "

  the second problem is that even after writing the user name in this format, the Jabber said that 'not to communicate with the server'. I can ping the CUCM and presence server both by using their ip addresses and hostnames through my PC on which is installed the Jabber. also I wrote serves him the IP address on the Jabber client while trying to connect the Jabber instead of their host names. is there any requirement to be member of a single domain?

  I tried Jabber for iPad to connect to the presence, but in vain too. y at - it knows no question or tips about the present? Otherwise, I can explain the steps I went through them to set up the presence and the CUCM for Jabber clients.

  best regards;

  Because for the most part, allows you to know the details of connection SRVs and SRVs work based on the field.

  You have successfully configured your SRVs according to configuration guides?

  It is very likely that some missing config or a misconfiguration.

  I have videos on how to configure the IM & P as well as Jabber config integration

  https://www.YouTube.com/playlist?list=PLFuOESqSTxEvZChqWgAJanctohRMe99CR

• Video Jabber for TelePresence, VCS-E connection problem

  Hello

  I recently configured control VCS, VCS Expressway and TMS. Two VCS servers are software X7.2 and TMS is on 14.1.1 commissioning is configured between the VCS control and TMS, everything works OK internally and users can log in their Jabber client of telepresence video.

  When you try to connect via the highway-VCS I get the following question: "connection refused by the server. Try to connect again later"

  Area authentication is configured like this:

  VCS-Highway

  Sub-area by default: do not check the credentials

  Area Sefault: Do not check the credentials

  Crossing area: Do not check the credentials

  VCS-control

  Default subfield: treat as authenticated

  Area by default: credentials check

  Subarea: Credentials Check {area which movi users register to regex function}

  Crossing area: Do not check the credentials

  Search the rules between the two VCS game [email protected] / * / OK.

  The only port of the restrictions in place here are between the VCS control and VCS Expressway, outgoing ports open to the highway of the SANCTION.

  It seems to me that there is a connection problem, as opposed to an authentication problem. also, do I need to configure a SIP domain local VCS-Highway even if I try to proxy, registration to the VCS control.

  Would be appreciated if someone can verify my authentication area also...

  Thank you

  Simon,

  to do this, you re normally the area on VCS - C as "check credentials.

  If you want to proxy of VCS VCS-C-E records, you should not add the SIP domain name to the VCS-E.

  "Rejected by the login server" sounds weird in this case, however, could you share what you use for this deployment, the SIP domain name so that we can verify that your DNS SRV records are fine?

  -Andreas

• Connection problems in Windows 7 clients to DFS shares.

  I have 2 physical servers running Server 2008 in a stand-alone clustered DFS namespace.

  All my XP SP2 clients to connect without any problems.

  None of my Windows 7 clients can connect. Error code: 08 x 0070035 the network path was not found.

  Thanks for the reply.

  It turns out that my problem was not related to the article you referenced. My DFS servers exist in one field other than my client computers. Even if I used the FULL domain name to connect to the share of SFR, I had to add the domain to the DFS server to my DNS suffixes list under the TCP properties. I was already doing this with my XP computers and don't even think about it when I started to test Windows 7.

• Problem with USB auto connect with clients that connect through the Security server...

  Lack of VMware View 5.0.1 with 2 servers connection and a security server. When the clients connect directly to the server connection, USB connection works very well... users can use their USB drives and other devices with their VM. The problem occurs when they attempt to use their USB devices when negotiated through the Security server.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing so it does not always work... customers just to get the scrolling message of office in the USB menu initialization.

  Our current facility is:

  External IP address-> DMZ (Security Server)-> connect to server

  Entrust us our firewall config through our ISP (we are not overloaded with scientists here, it's just me, so things like little help my work load). They are certainly not incompetent (or at least were not in the past). I had to open the external 32111 IP port to the DMZ, then of the DMZ to our connection server that is used for external connections. Everything about VMware View works perfectly for the clients that connect this way, but not USB devices.

  One thing I give is if our having a configuration of VLAN dedicated for customers views influence what either. I'm trying to keep an eye on what ports are open that for our firewall for my records, but I do not see where I openly opened ports on the internal side of security server to our internal network. He must have the port opened directly from the internal face of security server of vmware 32111 discovers clients?

  The firewall Guys tell me that they checked over and over that port 32111 is open throughout the. They also said that they tried to telnet 32111 to our security server port and have nothing back (should have gotten garbage at least according to them).

  An idea of the next steps to take? It is obviously a blocked port, I just have no idea why at this stage.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing it still does not work

  This is not what it takes. The agent is listening on the port 32111, you must open the firewall to allow connections to the Security server for the desktop on port 32111 (same thing you must allow RDP and PCoIP).

  Mike

• Jabber client - encryption of VCS Expressway with MRA

  Hi all

  I'm working on the implementation of MRA for a video solution existing. Version CUCM is 9.1.2 (no IM & P server), vcs - c and vcs-e 8.2.2.  Client Jabber is 11.5.x

  I finished most of the introduction and I am able to call internally and externally through MRA.

  I still have a few things to tweak.  One is the encryption of video calling once jabber connects from outside.  From my understanding, the thigh jabber call end point and VCS Expressway uses TLS. But when I run wireshark on the PC with Jabber client, I don't see the RTP stream as being encrypted.

  CUCM my jabber device does not use a secure profile.  Is it ok or not?

  Please let me know if more are needed.  Thank you

  You can confirm the call is encrypted from the client of jabber MRA by doing as follows (I used 11.5 jabber client, if you are using an older client, I can't guarantee this method):

  1. make a call from the client jabber ARM, once the call is configured and media is established, you can end the call.
  2. create a jabber client problem report (help > report a problem...)
  3. Enter the required details and save the .zip file.
  4 extract the file "jabber.log" from the .zip file. Since this file (at least since the version of client jabber 11.5) has the SIP messaging included in this document, you can use TranslatorX to view the file (you can also use a text editor if you wish).
  5 generate a diagram of the log file.

  translatorx - 01.png

  

  6. in the diagram of the scale, you should be able to locate the origin of the call. Search for an invitation, in my case a "RE-INVITE" and select it. A pop-up window will appear with the details of the SIP message.

  translatorx - 02.png

  

  7. read the content of the message prompt of the SIP protocol (focusing on the SDP - the component of negotiating media). I won't go into detail about how to read SIP messages (there's a good article here, it is not for jabber specifically, but the same concepts apply).

  translatorx - 03.png

  

  8. close the prompt message and open the message 'OK w/SDP' to examine the response of the VCS-E. The SDP response, we can confirm that the encryption settings have been accepted for the media (media will be encrypted).

  translatorx - 04.png

  

  For re - apply point Jamie, unless you run CUCM in mixed mode and using security profiles, signalling/media encryption stops on the thigh of CUCM/endpoint and the VCS - C respectively. See the diagram below for reference (mixed mode not implemented).

  MRA-media - flow.png

  

  You need not applied to the device of CSF security profiles to obtain the encryption between the client of jabber MRA and the VCS-E. If you can decode signaling and media packets in Wireshark your jabber client, you probably will not connect via ARM (ARM is always encrypted).

  Please let us know if that helps.

  -Jon

• Connection problems: Win7, Skype 6.14

  Hello

  I had connection problems since just after I did a windows update last night. (no idea if it's just a coincidence?)

  I read through several other posts here, tried reinstalling Skype several times (also re-installed an older version), checked the compatibility mode and still no joy. Oh, I restarted a few times too.

  I'm trying to connect using my Skype username and password (I don't have an account of ms) but the screen is just stuck there, it says signing in and the whirly thing (term techy lol) is just Dervishes round and round.

  I luuuurv my Skype, absolutely essential for me because I work from home, so I hope someone can help. PLEEEEASE :-)

  Thank you

  Try to uninstall the currently installed version and install the older version of Skype 6.9.0.106 using this msi installer:

  http://download.Skype.com/MSI/SkypeSetup_6.9.0.106.msi

• Connection problem: The DHCP service does not work.

  Original title: connection problem

  After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3

  Hello

  Follow these steps and check if they help.

  Step 1:

  Look for the DHCP Client service and DNS Client Services if they are started.

  a. Click Start.
  b. click on run and type Services.
  c. click right on - run as administrator.

  Check if the below mentioned services has mentioned State and type start.

  Client DHCP started Automatic\Manual.
  Client DNS started Automatic\Manual.

  Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.

  To verify that double-click the service, and click the Dependencies tab.

  Step 2:

  I suggest you to reset TCP/IP settings to solve the problem.

  How to reset the Protocol Internet (TCP/IP)

• Two wifi routers EA6200 having connection problems.

  I had a single wifi router configuration EA6200 and it was working fine but it has not reached the corner of my house. I decided to buy a second EA6200 in an attempt to expand coverage wifi and nothing else that problems have had since then. I tried several configurations and there are always questions where wifi is either very slow or cut all together. I tried to configure the routers by using the options listed in the manual. We'll call it the router connected directly to the modem ROUTER1 and ROUTER2 upstairs router.

  I connect both routers via a power adapter line I used for a while since I rent and can't pass the cables through the walls. I have one of the LAN ports on ROUTER1 connected to port WAN on ROUTER2 and ROUTER2 clipping value. I tried with ROUTER2 get his address IP of ROUTER1 automatically and I also tried to set a static IP address on ROUTER2, but I always had connection problems. I also tried one of the LAN ports on ROUTER1 connecting to one of the LAN on ROUTER2 ports. I put a static IP address on ROUTER2 and disabled DHCP. For both configurations, I tried to have the same SSID and password for both routers so that I can roam and connect automatically to the strongest signal and at first I put the automatic channel selection. I still had problems connecting so I tried to change the SSID of the router and change the SSID for the bands of 2.4 and 5 GHz and I tried to adjust the channels myself no conflicting channels and I still have problems.

  Again, the problems I encounter are failure intermittent wifi where it disconnected completely from the wifi but will reconnect then slow connection speeds not long after but also intermittent. Also, I have several chromecast dongles on the TVs in my house and they also periodically lose the connection to the network and have a lot of buffering issues. These problems disappear with a single connected router. I also tried to reset both routers and disconnect and plug my modem at the factory.

  All the ideas, because I don't see anything else to try?

  Bilz says:

  If I understand you correctly I tried already. I connected the LAN to LAN and used the static IP you listed for the second router. I put the SSID for the 5 GHz band were the same for both routers and used a different SSID for 2.4 GHz bands, but it's still the same on both routers. I used the Wifi Analyzer app to determine the best channels for my router and I put them all channels different worms. I don't know if I used specifically 1, 6 or 11, however. It would make a difference? For example if I used chanells 4 and 6 for 2.4 GHz bands, do you think that this would have caused some of my questions?

  Not quite. All SSIDs 4 must be different. You can be the cause of the camera jump back using the same ssid. So it could be xxxxx_24p and xxxxx_24s and even for the 5 GHz. xxxxx_5p and xxxxx_5s

• WRT54G v7 - Client DHCP list problem

  Hi all

  I have WRT54G v.7 - firmware ver.7.00.8.

  by mistake I removed the bad PC of the DHCP Client Table. / Status/LAN

  How can I restore the list adding the pc to the list, as there are only there ability to delete/remove?

  Another question,

  How many clients/PC wireless to the router can handle without a problem? ...

  I noticed that when we are in the 3 or 4 clients wireless connection is very unstable, slow response, connection drops.

  Is there anything I can do to improve this issue?

  Ty for any information,

  Frluga

  Restart your computer and it will receive a new IP address of the router.

• EA4500 - a wireless device of many with internet connectivity problem

  Hello

  I wonder if anyone can comment on a subject that I have with a (a) wireless on my home network devices.  The problem is that a Dell laptop knows slow or no internet connectivity using wireless at all.  Sometimes 1-2 minutes to load one page, other times the message 'not able to display the Web page' dreaded.  That's using Ethernet.  I have another laptop (brand/model exact even) and it has no problem.  I also have a Macbook Pro and other IOS from Apple (iPod/iPad) devices which are very good.  Several connected Ethernet devices are very good as well.  The laptop in question had no problem with my previoius Linksys devices, which are a BEFSR41/WAP55AG and a WRT-54GS v2.  This laptop was the first day or two on the EA4500, but something happened that causes this problem.  I had to add the WAP55AG on my network so my son is happy again, but my plan was to dismantle the other devices.  Suggestions regarding what I can do to fix this are greatly appreciated.

  Thank you.

  EA4500 Firmware v.2.0.37

  Laptop Dell Inspiron 15 w/Intel Centrino Wireless N1030, 1 x 2 bgn (2.4 GHz) + Bluetooth

  Hello

  Thanks for the suggestion.  I tired who, but it did not work.  I then called Dell and they found that the wireless adapter on battery power has been set to maximum power saving.  Changed for maximum Performance and it's been very well.  Fortunately there is nothing wrong with the router.  Thanks again for the suggestion.

• Connection problems on Netflix in Media Center: "there was a problem of signing. Make sure your internet connection is working and try again. »

  Original title: Netflix in windows media center, connection problems

  I saw disorder connect to Netflix on windows media center. I am running windows vista x 64. When I select the icon of the login screen appears, but when I try to connect it comes up with the error message "there was a problem of signing. Make sure your internet connection is working and try again. "my internet connection is fine and I can connect to http://www.Netflix.com/, so this problem should make windows media center, but I can't understand it. I have updated windows and windows media center and I'm still having this problem. Thanks in advance for any advice.

  The most likely explanation is NetFlix changed something in their routine of authentication (i.e. SOAP structure or just a URL string, whatever) and who broke the Vista NetFlix WMC client. It did not affect the web interface of NetFlix because operated a NetFlix service, they were obviously aware of the change pending and adjusted their web client to use the new method.

  Customer WMC NetFlix in Windows 7 (which is a new product), was probably already coded to use the new method. The client in Vista has continued to work with the old method, until NetFlix finally stop this method. Microsoft, slow to react and to assign developers to fix the Vista NetFlix WMC client missed the deadline and Vista users have been in the dark for a while.

  That's pretty standard for web services that cross corporate barriers. Particularly involving slow mega-body like Microsoft. A company change a routine and the other has to play catch-up. Communication is often difficult between the divisions within a company, between companies, it is often non-existent.

  The level of prissy whining in this thread was good for a laugh however. Those threatening to cancel NetFlix: rolleyes: your access was still working on their Web site. You were not without service, just, without the convenience of WMC. People grumble at Microsoft... anyone know if Microsoft was still knowledgeable of * when * NetFlix was going to turn off the old authentication? If they were told the night before (or any) "Hey let's turn off the old authentication routine" what kind of response do you expect? How long is it since the problem began, 28 days? It's actually a pretty fast for an element relatively low priority. Or it could just be that NetFlix reactivated their old methods of authentication as a temporary solution to this problem (they share a part in creation) until Microsoft can respond formally with an update.

  Now if Microsoft was duly informed advanced evolution of the service, still dragged feet (quite possible) I don't give them no slack. But at the end of the day, it is always a matter of low priority. It's fixed now, be happy until the next time that Netflix change their authentication routine.

• Pavillion G6 2014tx: wireless connectivity problems

  Since the last 2-3 months, my wireless connection does not work correctly. This happened right after that I did the partitioning in the D drive (I don't think this is the main cause). What is happening is that, all of a sudden when internet does not bar shows signs of yellow warning and 'tells' LIMITED ACCESS wireless network. When I try to solve problems, it will give no problem. Then in Device Manager, I tried to uninstall and install again, the internet worked for a while, and still the same problem occurs. When I tried to call to the service center, they told me that I have to buy CDs to retrieve a value of rs500 because I did not these recovery disks. I'm in serious trouble please help...

  I also tried to update latest driver frm net, even if the problem does not get resolved. I also tried to reset the TCPIP in cmd prompt, but it worked for 2-3 days and still the same problem happened...

  Hi there @Parthsagar2010

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with your wireless connection, and I am happy to help you with this.

  I realize that you mentioned the update of your driver from the internet, but just in case, here is the page drivers. There are several pilots possible depending on what card you have.

  HP Pavilion g6-2014tx Notebook PC - software & drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting your wireless network and Internet access (Windows 7)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.