host ESXi 4.1 to 5.5 upgrade

Similar Questions

• The upgrade to vCenter Server 5 with a view Server 4.6 on a host ESXi 4.1

  We have guests ESX and ESXi 4.1 and just got a new host ESXi 5. We must now be upgraded vCetner to version 5 server in order to manage the new host. I know 5 4.1 manage vCenter hosts but do I need to be wary when it comes to the host that maintains the virtual computers view or the view Server 4.6 VM itself?

  According to the comapbility matrix View 4.6 is not supported under vSphere or vCenter 5.

  http://PartnerWeb.VMware.com/comp_guide2/SIM/interop_matrix.php

• How can I reinstall / store data recovery an ESXi 4.1 lost during an upgrade to 5.5?

  I was running a host of ESXi 4.1 on a Dell T110 II with two RAID, a managed arrays by the controller integrated RAID that contained the system of ESXi and a small data store (channel) and the other controlled by a 6405e Adaptec controller which contained my main data store (BunkerHill). In the process of upgrading from 4.1 to ESXi 5.5, I forgot to include the drivers for the Adaptec 6405e controller and even if the upgrade of the host, he did not see the BunkerHill data store.

  I downloaded and installed the VIB for the controller 6405e and after restart the host ESXi 5.5 shows the Adaptec RAID under storage adapters, but the BunkerHill data store is still not visible and all virtual machines guests appearing on this show as unknown in the inventory. The channel data store and two invited VMS it holds are visible. Below a part of the kernel log is filtered on the RAID controller device name.

  I would like to get the recognizable BunkerHill data store before continuing the upgrade and would be grateful if someone could point me in the right direction (KB article, display, etc. that explains what I do). I need to reinstall 4.1 on the work of RAID (ESXi 5.5 and channel data bank) and then trying to reconnect the main data store, or are there changes I can do from the console to manually get the market things?

  Tips are appreciated,

  Thank you

  
  

  rSid

  (2015 06-16 T 03: 39:59.758Z cpu1:33296) PCI: 1095: 0000:03:00.0 named "vmhba2" (has ")

  (2015 06-16 T 03: 40:08.781Z cpu0:33415) VMK_PCI: 395: 0000:03:00.0 device name: vmhba2

  (2015 06-16 T 03: 40:08.781Z cpu0:33415) DMA: 612: DMA 'vmhba2' engine, created using the Mapper "DMANull."

  (2015 06-16 T 03: 40:08.782Z cpu0:33415) ScsiScan: 976: path 'vmhba2:C0:T0:L0': seller: model "Adaptec": "BukerHill" Rev: 'V1.0 '.

  (2015 06-16 T 03: 40:08.782Z cpu0:33415) ScsiScan: 979: path "vmhba2:C0:T0:L0": Type: 0 x 0, rev ANSI: 2 TPGS: 0 (none)

  (2015 06-16 T 03: 40:08.782Z cpu0:33415) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 03: 40:08.782Z cpu0:33415) ScsiScan: 1105: path 'vmhba2:C0:T0:L0': no standard UID: failure. ANSI version ' SCSI-2' (0x2).»

  (2015 06-16 T 03: 40:08.782Z cpu0:33415) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 03: 40:08.782Z cpu0:33415) ScsiScan: 1503: Add the path: vmhba2:C0:T0:L0

  (2015 06-16 T 03: 40:09.238Z cpu1:33415) ScsiNpiv: 1510: GetInfo for adapter vmhba2, [0x4108984b0280], max_vports = 0, vports_inuse = 0, linktype = 0, status = 0, failreason = 0, m = bad0020

  (2015 06-16 T 03: 40:19.582Z cpu2:33177) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba2:C0:T0:L0 '.

  (2015 06-16 T 03: 40:19.596Z cpu0:33177) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 03: 40:19.596Z cpu0:33177) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 03: 40:19.596Z cpu0:33177) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba2:C0:T0:L0 for the device "unregistered".

  (2015 06-16 T 03: 40:19.596Z cpu3:33177) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 03: 40:19.596Z cpu3:33177) ScsiDeviceIO: 7420: get VPD 83 inquiry for device "mpx.vmhba2:C0:T0:L0" from Plugin "NMP" failed. Not supported

  (2015 06-16 T 03: 40:19.596Z cpu3:33177) ScsiDeviceIO: 7456: get VPD 86 inquiry for device "mpx.vmhba2:C0:T0:L0" from Plugin "NMP" failed. Not supported

  (2015 06-16 T 03: 40:19.596Z cpu3:33177) ScsiDeviceIO: 6170: QErr setting for mpx.vmhba2:C0:T0:L0 of the unit could not detect. Failure of the error.

  (2015 06-16 T 03: 40:19.839Z cpu3:33177) SFS: 5091: pilot no. FS claimed device 'mpx.vmhba2:C0:T0:L0:1': not supported

  (2015 06-16 T 03: 40:19.839Z cpu3:33177) ScsiDevice: 3443: device successfully registered "mpx.vmhba2:C0:T0:L0" from plugin "NMP" of type 0

  (2015 06-16 T 03: 40:24.005Z cpu0:33177) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 40:24.352Z cpu0:33177) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 40:24.676Z cpu0:33177) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 40:29.840Z cpu0:33780) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 40:29.990Z cpu0:33785) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 40:30.177Z cpu0:32908) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 03: 40:30.177Z cpu0:32908) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 03: 40:30.194Z cpu2:33786) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 40:36.672Z cpu3:34032) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 40:41.839Z cpu2:32787) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0 x 85 (0x412e8089cdc0, 34344) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 03: 40:41.839Z cpu2:32787) ScsiDeviceIO: 2338: Cmd (0x412e8089cdc0) 0 x 85, CmdSN 0x0 34344 to dev 'mpx.vmhba2:C0:T0:L0' world not a sense H:0 x D:0 x 2 P:0 x 0 0 data not valid: 0 x 5 0x20 0x0.

  (2015 06-16 T 03: 40:41.839Z cpu2:32787) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x4d (0x412e8089cdc0, 34344) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 03: 40:41.839Z cpu2:32787) ScsiDeviceIO: 2338: Cmd (0x412e8089cdc0) 0x4d, CmdSN 0x1 worldwide 34344 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  (2015 06-16 T 03: 42:04.870Z cpu1:32909 opID = affe9c27) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 03: 42:04.870Z cpu0:32909 opID = affe9c27) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 03: 42:04.939Z cpu2:34420 opID = f965f306) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 43:25.893Z cpu0:32907 opID = de9d40eb) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 03: 43:25.894Z cpu0:32907 opID = de9d40eb) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 03: 43:25.976Z cpu1:34414 opID = 12fa472c) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 43:39.199Z cpu1:32906 opID = f8418990) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 03: 43:39.199Z cpu1:32906 opID = f8418990) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 03: 43:39.272Z cpu0:34043 opID = 8eb97c3d) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 32:43.729Z cpu1:33296) PCI: 1095: 0000:03:00.0 named "vmhba2" (has ")

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) VMK_PCI: 395: 0000:03:00.0 device name: vmhba2

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) DMA: 612: DMA 'vmhba2' engine, created using the Mapper "DMANull."

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) ScsiScan: 976: path 'vmhba2:C0:T0:L0': seller: model "Adaptec": "BukerHill" Rev: 'V1.0 '.

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) ScsiScan: 979: path "vmhba2:C0:T0:L0": Type: 0 x 0, rev ANSI: 2 TPGS: 0 (none)

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) ScsiScan: 1105: path 'vmhba2:C0:T0:L0': no standard UID: failure. ANSI version ' SCSI-2' (0x2).»

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) ScsiScan: 1503: Add the path: vmhba2:C0:T0:L0

  (2015 06-16 T 04: 32:51.940Z cpu1:33415) ScsiNpiv: 1510: GetInfo for adapter vmhba2, [0x4108984b0280], max_vports = 0, vports_inuse = 0, linktype = 0, status = 0, failreason = 0, m = bad0020

  (2015 06-16 T 04: 33:02.185Z cpu2:33177) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba2:C0:T0:L0 '.

  (2015 06-16 T 04: 33:02.199Z cpu0:33177) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 04: 33:02.199Z cpu0:33177) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 04: 33:02.199Z cpu0:33177) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba2:C0:T0:L0 for the device "unregistered".

  (2015 06-16 T 04: 33:02.199Z cpu0:33177) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 04: 33:02.199Z cpu0:33177) ScsiDeviceIO: 7420: get VPD 83 inquiry for device "mpx.vmhba2:C0:T0:L0" from Plugin "NMP" failed. Not supported

  (2015 06-16 T 04: 33:02.199Z cpu0:33177) ScsiDeviceIO: 7456: get VPD 86 inquiry for device "mpx.vmhba2:C0:T0:L0" from Plugin "NMP" failed. Not supported

  (2015 06-16 T 04: 33:02.199Z cpu1:33177) ScsiDeviceIO: 6170: QErr setting for mpx.vmhba2:C0:T0:L0 of the unit could not detect. Failure of the error.

  (2015 06-16 T 04: 33:02.439Z cpu0:33177) SFS: 5091: pilot no. FS claimed device 'mpx.vmhba2:C0:T0:L0:1': not supported

  (2015 06-16 T 04: 33:02.439Z cpu0:33177) ScsiDevice: 3443: device successfully registered "mpx.vmhba2:C0:T0:L0" from plugin "NMP" of type 0

  (2015 06-16 T 04: 33:06.593Z cpu2:33177) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 33:06.992Z cpu0:33177) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 33:07.322Z cpu1:33177) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 33:12.467Z cpu2:33780) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 33:12.608Z cpu2:33785) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 33:12.791Z cpu1:32908) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 04: 33:12.791Z cpu1:32908) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 04: 33:12.807Z cpu0:33786) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 33:21.919Z cpu2:34032) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 33:27.109Z cpu2:32787) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0 x 85 (0x412e8089db80, 34335) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 04: 33:27.109Z cpu2:32787) ScsiDeviceIO: 2338: Cmd (0x412e8089db80) 0 x 85, CmdSN 0x0 34335 to dev 'mpx.vmhba2:C0:T0:L0' world not a sense H:0 x D:0 x 2 P:0 x 0 0 data not valid: 0 x 5 0x20 0x0.

  (2015 06-16 T 04: 33:27.109Z cpu2:32787) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x4d (0x412e8089db80, 34335) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 04: 33:27.109Z cpu2:32787) ScsiDeviceIO: 2338: Cmd (0x412e8089db80) 0x4d, CmdSN 0x1 worldwide 34335 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  (2015 06-16 T 04: 54:09.845Z cpu0:32906 opID = 372194ec) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 04: 54:09.845Z cpu0:32906 opID = 372194ec) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 04: 54:36.638Z cpu1:32910 opID = 6037ca3e) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 04: 54:36.638Z cpu1:32910 opID = 6037ca3e) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 04: 54:36.713Z cpu0:34040 opID = 2ffcf7c7) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 55:22.146Z cpu0:32909 opID = a7c2c9af) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 04: 55:22.146Z cpu0:32909 opID = a7c2c9af) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 04: 55:22.218Z cpu3:34041 opID = c15706cb) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 05: 03:27.938Z cpu0:32785) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0 x 85 (0x412e8084d6c0, 34335) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 05: 03:27.938Z cpu0:32785) ScsiDeviceIO: 2338: Cmd (0x412e8084d6c0) 0 x 85, CmdSN 0x3 worldwide 34335 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  (2015 06-16 T 05: 03:27.938Z cpu0:32785) ScsiDeviceIO: 2338: Cmd (0x412e8084d6c0) 0x4d, CmdSN 0x4 worldwide 34335 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  (2015 06-16 T 05: 33:28.102Z cpu0:32785) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0 x 85 (0x412e80875440, 34335) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 05: 33:28.102Z cpu0:32785) ScsiDeviceIO: 2338: Cmd (0x412e80875440) 0 x 85, CmdSN 0x6 worldwide 34335 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  (2015 06-16 T 05: 33:28.102Z cpu0:32785) ScsiDeviceIO: 2338: Cmd (0x412e80875440) 0x4d, CmdSN 0 x 7 worldwide 34335 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  (2015 06-16 T 05: 50:56.541Z cpu0:47363) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 50:56.541Z cpu0:47363) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 50:56.541Z cpu0:47363) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 51:17.866Z cpu1:47425) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 51:17.866Z cpu1:47425) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 51:17.866Z cpu1:47425) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x10

  (2015 06-16 T 05: 52:04.275Z cpu2:32787) WARNING: ScsiDeviceIO: 1223: mpx.vmhba2:C0:T0:L0 camera performance has deteriorated. Latency of I/O increased value average of 414 microseconds to 13216 microseconds.

  (2015 06-16 T 05: 53:30.257Z cpu0:32785) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0 x 85 (0x412e8083a380, 48445) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 05: 53:30.257Z cpu0:32785) ScsiDeviceIO: 2338: Cmd (0x412e8083a380) 0 x 85, CmdSN 0x9 worldwide 48445 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  (2015 06-16 T 05: 53:30.257Z cpu0:32785) ScsiDeviceIO: 2338: Cmd (0x412e8083a380) 0x4d, CmdSN 0xa worldwide 48445 to dev 'mpx.vmhba2:C0:T0:L0' has no meaning H:0 x 0 D:0 x 2 P:0 x 0 valid data: 0 x 5 0 20 x 0 x 0.

  (2015 06-16 T 05: 58:07.182Z cpu2:49346) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 58:07.182Z cpu2:49346) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 58:07.183Z cpu2:49346) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x20

  (2015 06-16 T 05: 58:28.217Z cpu0:49408) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 58:28.217Z cpu0:49408) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 58:28.217Z cpu0:49408) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 06: 00:42.324Z cpu1:32786) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0 x 85 (0x412e8088b8c0, 50440) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 06: 00:42.324Z cpu1:32786) ScsiDeviceIO: 2338: Cmd (0x412e8088b8c0) 0 x 85, CmdSN 0xc worldwide 50440 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.

  (2015 06-16 T 06: 00:42.324Z cpu1:32786) ScsiDeviceIO: 2338: Cmd (0x412e8088b8c0) 0x4d, CmdSN 0xd worldwide 50440 to dev 'mpx.vmhba2:C0:T0:L0' has no meaning H:0 x 0 D:0 x 2 P:0 x 0 valid data: 0 x 5 0 20 x 0 x 0.

  (2015 06-16 T 06: 03:28.267Z cpu3:32788) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0 x 85 (0x412e80896800, 34335) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 06: 03:28.267Z cpu3:32788) ScsiDeviceIO: 2338: Cmd (0x412e80896800) 0 x 85, CmdSN 0xf worldwide 34335 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.

  (2015 06-16 T 06: 03:28.267Z cpu3:32788) ScsiDeviceIO: 2338: Cmd (0x412e80896800) 0x4d, CmdSN 0x10 worldwide 34335 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  Hello

  looks like resignaturing volumes data store could help.

  Here is another discussion of a user to get similar errors: Vmware 5.5 Upgrade breaks access the VMFS data store (kind of)

  More information: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1011387 and literature vSphere Documentation Center

  cykVM

• ESXi 5.1 to 5.5 upgrade

  Hi all

  I intend to spend any esxi 5.1 5.1 to our newly built 5.5 vCenter vCenter army.

  We not have distributed switches, SRM, Vmware view etc...
  Not also concerned historical data in vCenter 5.1

  What is the best way to do it?

  Here is my planned approach

  • Create new cluster on vCenter 5.5 that will even
    as cluster in vCenter 5.1.
  • Disconnect hosts in vCenter 5.1 and register
    ESXi host to vCenter 5.5
  • I guess when I do this standard will all be
    always available as it is esxi host specific not vcenter.
  • We have 5 guests clustered, so I intend to
    remove a host both the cluster and esxi 5.1 to 5.5 upgrade using Update Manager
    5.5 the new vCenter.
  • Given that I don't update facility, I'm not sure will
    switch support will be always there after upgrade. We use iscsi for storage
    and it uses a standard switch. If it is not available I can recreate after upgrade.
  • Anything that suggests on pit fall that I need attention in this plan, please suggest.

  Thank you...

  I did these migrations several times in the past and that you are having problems.

  What I usually do in such cases is to:

  • Disable HA in two groups (the current/old as well as new)
  • Make sure you of EVC is configured correctly to the new cluster (if necessary)
  • disconnect and remove all hosts (one by one) from the old server vCenter Server and add them to the new cluster
  • configure settings like HA cluster, DRS...
  • Once everything works as expected begin the upgrade of the host

  Be sure to reconfigure your backup software (and any other 3rd party software and Add-ons) after migrating to the new vCenter Server hosts.

  André

• New host ESXi licensing

  Hi guys,.

  I am currently working on a workflow for the provision of new hosts ESXi from scratch. Unfortunately, I glued on the new VMWare licensing to a host. I wanted to do this with a script element:

  Entry:

  Host (VC: HostSystem)

  License (String)

  Code:

  Host.configManager. licenseManager. licenseAssignmentManager.updateAssignedLicense (Host.id, license, null);

  Unfortunately, this returns an error indicating licenseManager is null.

  Anyone know how to set the new licenseManager on the host or license in another way?

  Thank you

  Kamil

  OK, I got it myself. Instead of approaching licenseManager thanks Host.configManager I used instead of the VC:SdkConnection variable.

  Entry:

  Host (VC:HostSystem)

  SDK (VC:SdkConnection)

  LicenseKey (String)

  Code:

  SDK.licenseManager.licenseAssignmentManager.updateAssignedLicense (Host.id, LicenseKey, null);

  This works perfectly!

• The traffic between a host ESXi and vCenter Server is secure?

  Dear team,

  You pray let me know is traffic between a host ESXi and vCenter server (vice versa) is secure?

  The VC and ESXi version is 5.1U1a

  concerning

  Mr. VMware

  Default SSL certificates are installed automatically. However, you can configure the third-party SSL certificates to make the environment more secure.

  Please see:

  VSphere Documentation Centre

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-51-Security-Guide.PDF

• VShield service Manager installation and vShield app to the same host ESXi

  Hello, I'm planning on vCloud Director assessment in a laboratory with only a single ESXi host.  When I try to install the app vShield service I get the following warning: do not install on a host or a cluster where the VC or the vShield Manager resides. This can cause network problems. The following IP address must be a unique IP address assigned to this unit of App vShield. Please do not use an IP address that is assigned to another machine, including the VC, vShield Manager or any ESX host. Using an incorrect IP address you will need to uninstall and reinstall App vShield on this host. My question is: is it is absolutely impossible to install vShield manager on the same host ESXi as the vShield Manager resides?  Or is it just a bad practice?  What are the ramifications of installing?

  It is a general practice to separate management and resources. What you see is just a warning. When there are very fewer resources available you can do. Make sure that you exclude from the required VM by referring to this post

  http://www.yellow-bricks.com/2012/03/17/excluding-your-vCenter-server-from-VShield-app-protection/

• Restore directly to a host ESXi with VMware Data Protection (WTP)

  Can I use VMware Data Protection restore directly to a host ESXi, or do I have to have vCenter Server running? (If the virtual machine, I am trying to restore is vCenter Server itself, then it won't work unless I can restore to a host ESXi directly without using vCenter Server...)

  You don't need a vCenter running for the restoration of emergency (directly to the host).

  You can also use this direct restore to restore a vCenter to a host. I think this is the main reason that this feature was developed

  Edit: More on it in vSphere Direct-to-Host Data Protection's emergency recovery. VMware vSphere Blog - VMware Blogs

  Concerning

• New host ESXi 5.1 in DMZ - cannot connect through vCenter Client or web, but can via SSH, if I have activated

  We have a simple DMZ where I set up a host running ESXi 5.1. I have another windows server in the DMZ subnet and I can load the new ESXi her host's web site. From my PC in our LAN I can not pull the top web interface 5.1 ESXi or connect via vSphere Client. If I enable SSH on the new host, can I use Putty to connect to the new host ESXi from my PC in LAN. I watched the event logs in our firewall and nothing seems to be blocked. I guess that the problem is related to a value or a firewall setting in ESXi 5.1 but I don't know. Any help would be appreciated.

  Thank you

  -Kevin

  Just a thought. Why don't run you the ESXi host in your internal network management and only virtual machines in the DMZ? Would make the ESXi host management even more secure, and you wouldn't have to open Firewall ports.

  André

• Three hosts ESXi and two Clusters VSA

  Is it possible / is there a problem with it?  I know a single cluster VSA is designed to work with two or three nodes, but is it possible to have two clusters VSA on three nodes (one of the three nodes would be two VSA groups on both nodes at the same time).  I know there is a limitation that requires an instance of vCenter by VSA cluster, but I was unable to find mention of this type of configuration.

  Thank you.

  When the VSA cluster is created, a single VSA appliance is installed on each host ESXi (2 or 3 ESXi hosts) of the VSA cluster.  The VSA appliance uses local storage of the ESXi server. If you try to create an another cluster of VSA, it won't use an ESXi server that is already a member of a cluster of VSA.  In other words, a single VSA device can be installed on a server ESXi.

• Communication with a host esxi 4.1 problem

  Hi, Hello, we have a problem with an esxi host.
  I tell you, since the server vcenter do not have access to the esxi hosts (or ping or whatever it is), but if we have access (ping) for guests of virtual computers that are located in the
  Currently, ago single vswitch in the esxi host through which pass the data management console and the virtual machines themselves.
  Communication tell me that no communication problem.
  Another symptom, I want to say is that from another machine in another range if you can test the esxi hosts.
  A host esxi 4.1 and of course has no firewall.
  What can happen?

  Hello

  Just to clarify, you are able to ping vms, but not the host

  Management of the ip. Try to check again the management ip address,

  Failure of the door and vlan id to the host. Also id vlan

  To the vswitch.

• Draw attention to reports on a stand-alone host ESXi 5

  Is it possible to execute all statement (email alerts) on a stand-alone ESXi 5 hosts?

  I have a client with multiple virtual machines running on a single host ESXi 5 and you need to know, especially if the host fails, or possibly if resources are stretched.

  Is there anything that is integrated to respond to reports or is the only option to use vCenter?

  Unfortunately, these features are offered for vCenter. You can search any 3rd party tool which offer these features.

  e.g. veeam monitor

• Travel/cloning between two hosts ESXI VM

  Hello

  I have two hosts ESXI 4.1 with VSphere Essentials for VCenter license. I'm not able to move the virtual machine to one ESXI host to another (power off). It is not supported with VSphere Essentials license? Data warehouses can be shared between the two ESXI hosts?

  What is the size of your virtual machine, what is the speed of the network and how your local storage looks like? Using RAID? How many disks and RAID level? You have a battery attached to the RAID controller write buffer cache?

  The waiting period does not necessarily mean the tasks does not work. Often it is only a delay in the vCenter Server GUI, but the process is still running and you just need to be patient. You see the files being created on the target data store?

  André

• Host ESX 4.0 to 4.1 upgrade

  Hi all

  In my organization I have assigned to a task of the Host ESX 4.0 to 4.1 upgrade.  I came through the VM KB documents.  Y at - it videos available that shows the upgradation via the Service Console.

  Thanks for all the entries...

  Thank you.

  Hello

  You don't need a video, its very simple.

  1. simply download: upgrade-from-ESX4.0-to-4.1.0-0.0.260247-release.zip

  2 use VUM guests 4.0 to 4.1.

  In addition, you can do command line...

  1. download: pre-upgrade-from-ESX4.0-to-4.1.0-0.0.260247-release.zip

  2. download: upgrade-from-ESX4.0-to-4.1.0-0.0.260247-release.zip

  3 using esxupdate

  Thank you

• Restart host ESXi 4.0 with vCenter 4.0 as a virtual machine

  I have two hosts ESXi 4.0:

  1. the host 1 has vCenter 4.0 installed as a virtual machine with a VMware data recovery VM and some other virtual machines.

  2 host 2 has a number of virtual machines.

  I want to restart the first host and level to ESXi 4.0 Update 1 - I won't stop VMs on host 2, and I want to improve it yet.

  My plan is to stop all VMs on host 1 letting the vCenter VM until the last. I have then place my host in maintenance mode and run the host update application to install the update which will then require a restart of course. Once restarted, I'll connect to host 1 directly by using the vSphere client and restart the VM vCenter. I will then restart all my other virtual machines.

  Is this sound OK? VCenter will restart Fortunately?

  You can also power off the vCenter, register on the other (ESX) If you have the shared storage and try again.

  Be sure only to say I_moved about the question that appear when you turn on the virtual computer.

  André