Host of Ubuntu 12.04, OSX 10.7 comments. Problems with VMWare folder sharing :(

Similar Questions

• WAG160N, names of host and Ubuntu 9.04

  Hi all again,.

  Next problem, I can now TEU hosts names to access my network, but only under Windows. I also have Ubuntu, but cannot through the network with host names, I thought that the problem would have been fixed by applying the "Spca" work aroungd to the fields routers host and domain in the basic menu, but it seems only vault with windows.

  With the installation of Ubuntu is a working configuration without any problem with the names of host and al., until I swapped my NETGEAR for the WAG160...

  The symptom is that when using the net in ubuntu and you use 'ping server-pc' instead of returning the IP address 192.168.xxx.xxx he sends the ping by the wan port, which is completely false!

  does anyone have a solution?

  BTW running the last FW.15

  Screenshot will be explanatory: -.

  

  Thanks in advance, Andy

  It is access to all printers, machines, dlna, XBMC etc... There are two main ways to access these items on your network, by the IP number, domain FULL name if you have a server domain, but in a small soho configuration, you can use a shertened version comes from the host name as you know.

  The wag V1 has an unfortunate problem with its firmware DNS/DHCP you can access all of the elements easily by the IP number if you know, if that number changes as it does with DHCP, you must check the Jokers dhcp table or watch you machines IP # through networking Panel is - not more easy to use the host name of machine that would upset No, I did this in the past with RH7.3 Linux I have kown it is possible.

  You get a partial solution by changing the setings base of the wag and by changing the fields for the host name and the domain name, but it breaks under ubuntu and you are not able to use hostnames on linux.

  My preference is for dhcp with host names, if the configuration of the firmware of the devices was on-site the deamons dhcp/dns should be no problem as the netgears can, and after all almost all routers and gateways use there ' nix embeded OS in any case, the part of the sentence "Why do you have a dog and bark" comes to mind.

  My only gripe is with Linksys on this because I know it's possible, but they don't seem to want to know, so I poured out the WAG160 and are returned and bought a Netgear DGN2000 and names of host and all is working perfectly.

  Here ends the referral of Linksys.

  Sayonara

  A.

• Problem installing vmware in Ubuntu 11.10 tools

  I've upgraded from vmware workstation 7 to 8 on a windows 7 pro workstation. I've added to my VM - 11.10 Ubuntu guest. Now I have a problem installing vmware tools.  That's what I did:

  ((1) installed Ubuntu 11.10 CD in the drive, 2) open vmware and Tools CD added to office.  (3) connect you open terminal window.and.  Since I'm new to Linux, I'm stuck on how to set a password.  I type sudo passwd root, and I can't type anything in the window.

  Ideas or suggestions will be greatly appreciated.  Thanks in advance.

  You have two questions unrealated

  (1) with respect to the OS - Ubuntu 11.10 - these shoud guest invited on ubuntuforums.org Creafe a connection there and ask in the beginner's forum.

  Tip - You don't really have need a password for root in Ubuntu.  Use you sudo to run root permisssions wherer programs are needed.  He said on top of each terminal.

  (2) you have any questions on how to install VMware Tools in a Linux (Ubuntu 11.10) Guest.  You most certainly need assistance with this.  In the toolbar of the program, you will see a tab called "Help".  It only contained other information you are looking for.

  See the sections on VMware Tools.   They are really useful!

  Tip: You do not use the OS installation disc that you used to create the virtual machine. Look closely under the VM tab at the top. There will be an option in the drop-down list that says "The Install Vmware Tools" you need to select this option.  The insatll will be mounted as if by magic in SLE directory/Media in the comments.  Copy the tarred on this cdrom in / tmp.  Then naviagate (carefully) in / tmp and unpack the file you copied.  Carefully change (look at you spelling - do what I say - not as I do in this post!) to the directoyrf that was created.  Exceute as su (i.e. root - like in the 1 trick.)  the .pl program wiil be contain breast.  Technically, this is called a "script" don't forget to put a. / before the script name or the bad dthing don't know he lives there.  He will ask youj on many issues.  Answer Yes to all these thatg you can.  Most likely, he will say he does not find the gcc compiler (gcc to learn more about the new program of thisbrfand the man.  He complains of missing headers.  Exit the script (Ctrl + c).  Run a progarlm (as root!) called apt - get.  Type the command apt - get install build-esseential.  Thatt is going to install the compiler you need!   Yes still needs to install the header ogical file well! Phew!  The best way I found to do this is to install a nifty program called synaptic. Use apt - get install synaptic.  I think that Ubuntu even comes with a somewahat more easy to program called apt - get it will tell you and have fun there no Super Powers mean if you type an incorrect order!   I digress from the subject.   So, you can use use "sudo aptitude install synaptic l.  Now issue the command uname - r.  He sleeps on the same kernel you use since I use Ubuntu 11.10 asI type while I'm about to uplgrade to the very scary Ubuntu 12.04.  You don't want to do it yourself.

  3.0.0 - 12-Generic

  Now launch Synaptic.  There will be a message the first time on the program expalining.  If you want to see it every time to understand this program if y0ou forget don't check the box saying you don't wang to see this every time.  BTW youi will be asked for your root passworfd to run the program.  Hope you rfemembered it!

  In any case in the search box copy, then paste the result above (one that ends with - generic - but anything copylthe) there will be l be a long list of items, but choose the one that has the string above and the word "headers".  Insatll who.  After all it can return to the order which took end. / pl and run it once more.  Answere questions.  It will end with the encouraging words (you can take advantage of the VMware Tools.  Then, run the command - vmware-toolbox as it says.

  F well there you have it in short.  My price for Linux and Mwar advice is reawsonable please contact me at one of my addresses, alias - [email protected] and we can talk about payment.

  Enjoy

• Tripple fault: Dual boot - win 7 x 64 host - ubuntu 12,04 LTS x 64 comments on another partition (raw disk)

  Hello

  I'm trying to install my second OS (ubuntu 12.04 LTS x 64), installed on the dual boot with grub on another partition of my Win 7 Pro x 64 boot disk.

  Linux partition are not mapped in the windows and the installation is as follows:

  1-0 (HPSF/NTFS) partition: 100 MB win 7 partition

  2. 1 (HPSF/NTFS) partition: c: boot Win 7 pro x 64 (133,24 GB) partition

  3 2 (Linux) partition: / partition Ubuntu 12.04 LTS x 64 (37,25 GB)

  4. 3 (Linux swap) partition: SWAP of Ubuntu 12.04 LTS x 64 (3.72 Gb)

  5. 4 (Linux) partition: / home partition Ubuntu 12.04 x 64 (105,14 GB)

  This drive in SATA connected drive (WDC WD3000HLFS - 01G6U1 ATA Device, (Channel 0, Target 1, Lun 0)).

  When you configure the virtual machine, I set the Partition 2 to be used with this machine.

  I checked the folloing points:

  • Intel processor supports x 64 (i5 750 @ 2.67 GHz, 4 cores)
  • VT turned on in the BIOS

  When you run the virtualized Ubuntu I am getting following error message:

  

  I've attached the vmware.log file.

  What I am doing wrong?

  Can someone help me get my virtualized Ubuntu?

  Please foregive me my English because it is not my native language, I'm French.

  Thanks in advance for your help and advice,

  Concerning

  Stéphane

  PS: If you need more information let me know (please tel me also how to obtain the necessary information)

  strange that then 0 is not present?

  > Really bad news

  Yep - but not really news - older versions of the workstation all have this problem with Windows 7 guests - which is why I still use 2003
  I would setup just the Ubuntu VM in a regular vmdk ANDS store it on any of your other 3 discs

• Problems with updating software in OSX

  I had problems with OSX 10.8.1 update on my VMs to 10.8.2. The automated software update does not work because the virtual machine does not advertise as a piece of Apple hardware.

  I tried caraa apply the updates to download from the Apple Downloads site, however, I get an error during the launch, the updates that are not for the current running computer.

  Someone had this same question, and what have you done to apply the software updates?

  Thanks in advance!

  -Gian

  This looks suspicious:

  Install OS X Lion mountain [328]: @(#) PROGRAM: PROJECT: install-729

  Install OS X Lion mountain [328]: @(#) PROGRAM: THE PROJECT: InstallAssistant-351
  Install OS X Lion mountain [328]: material: VMware7, 1 2.19 GHz (x 2), 4096 MB RAM
  Install OS X Lion mountain [328]: performance Build of the OS: Mac OS X 10.8.1 (12 B 2080)

  I think it's a 'specific machine' Mac OS build number (although Apple seems to do strange things with those numbers lately, and yours is no appearing on this list).  The build of Mac OS X 10.8.1 version is 12B 19 construction, according to the official Apple documentation.

  Did you install the software image (or Recovery HD) that came with the Macmini6, 2 or has been downloaded by the Macmini6, 2?  These images of specific machine usually don't work properly on a virtual machine, because they are supposed to be linked to the host hardware.  If it is a machine specific image, I'm surprised that it installed at all... they refuse generally very early in the installation process.

  You have access to the media for the original Cougar version 10.8.0 GA (A 12, 269)?  Who could better behave...

  See you soon,.

  --

  Darius

• Problem using a folder next to the East on UNIX Ubuntu 10.4 with APEX listener

  Hi Forum,
  
  We have APEX 4.1 installed on Ubuntu 10.4 with the latest version of the APEX-listener.
  
  We want to achieve is that we are able to collect our Javascript extensions and css next to the folder is in a folder of our own.
  Problem now is UNIX, this doesn't seem to be possible, because we are unable to load any resource of this folder. The only solution we could come up with is to place a symbolic link in the/i/folder-pointing to the directory we want to include.
  The folder we want to include got 777 to exclude any potential problems of access to in UNIX
  
  Under Windows, this doesn't seem to be the case.
  
  If someone had a similar problem or is able to give advice on how to fix this?
  
  Thank you
  
  Jürgen

  Hi Jürgen,

  docroot
  -foo
  -J' I

  This does not work in stand-alone mode, the integrated nature fixed contexts (including + / i + and + / apex +) without the chance to bring custom contexts.
  It will run in GlassFish/Tomcat, if you deploy content correctly. You can do this by creating a war file that carries your files, but I wouldn't recommend it has static content more convenient ways.
  Tomcat has for example a context ROOT when running on a default configuration. This context can be used for static content similar to a simple HTTP server host, for example when using the htdocs of the Apache HTTP server as docroot. So you could simply copy your directory foo in the context of the ROOT and should be able to access the content using http://yourtomcathost:yourtomcatport/foo/file name .
  GlassFish is a concept similar to this: each domain has a docroot directory. As explained for Tomcat, you can simply create or copy your directory foo it so that it is available for your customers.

  If this does not work, you have a general problem with your GlassFish/Tomcat configuration, like the docroot has nothing to do with the earpiece of the APEX. I have just retestet with fees GlassFish/Tomcat on Ubuntu 8.04 LTS (Server Edition) as follows:
  1 download the http://glassfish.java.net/ zip or Tomcat mirror packages respectively.
  2 unzip the package
  3. create the directory 'foo' docroot (for GlassFish) and ROOT (for Tomcat)
  4. create the file 'bar' in 'foo '.
  5. start the server instance
  6 use a client remote access http://mybox:8080/foo/bar.txt and got the file.

  How did you install your GlassFish/Tomcat on your Ubuntu?
  Whatever it is, if you tried the docroot/ROOT approach and doesn't, you can always try the war file deployment. Maybe your GlassFish/Tomcat instance has disabled the docroot/ROOT context for security reasons.

  Note that you can have both, that is, you cannot use the war with framework file + / foo + and have always a + / foo + subdirectory in your docroot/ROOT.

  -Udo

• Mouse USB and keyboard problems in VMWare Workstation / Ubuntu 8.10

  I am running VMWare Workstation for Linux version 6.5.0 build 118166

  My host is Ubuntu 8.10 / 2.6.27 - 7-generic and I am hosting another instance of the same operating system on the same machine.

  The problem I see is that the keyboard and mouse misbehave / erratic from the host machine. It is a multimedia keyboard 1.1 Microsoft wireless

  There are essentially two problems:

  (1) dedicated cursor keys / pageup / to / home / delete do not work properly. For example, PageUp wants to take a screenshot.

  (2) the mouse seems slow to recognize clicks / trolling. For example, if I click on a tab in Firefox and move immediately, the tab starts to drag. Even if I click on an image and then move the mouse - drag is initiated.

  I tried several combinations of keyboard layout in the case of Ubuntu comments does not. No problems of this nature in the host, or an instance of XP comments.

  Any suggestions?

  Workaround KB 1007439 make a difference?

• Re: BIOS version 3.30 Tecra A11/M11: problems with Ubuntu systems?

  I just got the updated BIOS version 3.30 on my Tecra A11/M11 invitation.
  I'm still under Win7 now, but plan to add a dual boot with Ubuntu when the next LTS strikes in April.

  Is anyone having problems with the new BIOS?
  Should I upgrade or leave intact 3.20?

  I don't find any evidence of trouble with 3,20.

  Why upgrade BIOS if everything is OK?

  In addition to as much as I know that Toshiba can't stand not the Linux operating system, and I doubt that the new BIOS would improve any Linux performance so, if you are satisfied with the version 3.20, stay with that

• A Dell laptop; After a host of updates for my XP Professional, I can't locate a folder

  After a host of updates for my XP Professional, I can't locate a folder with most of my files and photos. This folder was sitting on the desk. How to find or restore my folder?

  If it was a shortcut to the folder, simply recreate it.

  If the folder itself, it's probably under
  C:\Documents and Settings\ * \Desktop

  TaurArian [MVP] 2005-2010 - Update Services

• Get error "Generic Host Process for Win 32 Services has encountered a problem.

  Original title: generic host and other problems

  I'm using XP Prof SP3. I have following problems: 1. get "Generic Host Process for Win 32 Services has encountered a problem..." ' 2. audio past. 3. can't get wndows update downloads, 4. Security Center says "... not started or was stopped. Help please.

  Open the command prompt and type this:

  sfc/scannow

  Let the run command, if the problem has not resolved, try the system restore and restore your system at a time before the problem happens.

• Error message Windows XP released "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp

  Error message Windows XP Home Edition comes out "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp. I found the article exactly to what I have experienced http://support.microsoft.com/kb/821690 but as far as I know, this issue is not caused by an old HP printer. Can you give me the steps to fix this problem other that that link I mentioned. Thank you.

  Hello

  ·         You have a HP printer connected to the computer?

  If so, try the article you mentioned.

  Generic host process error message and a flashlight icon appear

  If this is not the case, check to see if this article helps you.

  Error messages when you start a Windows XP-based computer and then try to download Windows updates

• Error "Generic Host process for Win 32 services has encountered a problem and needs to close." Sorry for the inconvenience. "Please tell MIcrosoft this problem."

  Original title: programs appearing and disappearing

  Generic Host process for Win 32 services has encountered a problem and needs to close.
  Sorry for the inconvenience.
  Please tell this problem to MIcrosoft. We have created an error report that you can send to help us improve the generic
  Host Process for Win 32 Services. We will treat this report as confidential and anonymous. To see the data click on send
  Error report or not send.
  I clicked on the error report, and that's what he said... szAppname:svchost.exe szAppver: 5.1.2600.5512
  szModver: 5.1.2600.5755 szModname: ntdll.dll compensate 00023845 etc, etc.

  Hi 1jimbo1,

  1. when exactly you receive this error message?
  2. did you of recent changes to the computer?

  Method 1:

  Step 1:

  You can try to start in safe mode and check if the problem occurs.

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If the problem does not happen in safe mode and then, try to perform a clean boot.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

  After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

  Method 2:

  You can also check the following link and complete the scan line on your computer to check whether your computer is infected with a virus or not.

  http://OneCare.live.com/site/en-us/default.html

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Recently, when I restart my laptop (dell), I see this error: __Windows (rundll32) host process has stopped working__I do not have this problem since 2 months ago__

  Recently, when I restart my laptop (dell), I see this error:

  Host process Windows (rundll32) has stopped working

  I don't have this problem since 2 months ago

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, product name, file Version, company name, location
  in the registry or file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Problem with Windows host process Rundll32

  I am also having a problem with the windows Rundll32 host process. It has stopped working. It is very difficult to find help for windows software problems. I paid a small fortune for my computer and software. It shouyld be a number to call for help.

  Hi Scott,

  (a) when you get this error message?

  If this problem occurs when you view and then try to set up an audio playback device disabled on a Windows Vista-based computer, follow the steps mentioned in the article.

  Error message when you try to configure an audio playback device disabled in Windows Vista: "Windows host process (Rundll32) has stopped working.

  http://support.Microsoft.com/kb/953916

  You can also follow the steps by SpiritX, see link below
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/cbaa877c-9f51-45B4-9860-889e27a24226

  Please see the link below for Microsoft and support Customer Service

  How and when to contact Microsoft and support Customer Service
  http://support.Microsoft.com/kb/295539

  Please let us know if you need assistance, we will be more than happy to help you.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the host view

  Hi all.

  I have a problem with the display of my physical host information. I installed FglAM on the server, deploy the cartridge of the OS, create agent. But when I access the dashboard of the hosts, I see that my host currently does not monitor.

  Agent log is good (logfile to join). I see same alarm of this host, but no performance and other information.

  Thank you

  Nikolai, I recommend that you should open a case of pension for later analysis.

  David Mendoza