WAG160N, names of host and Ubuntu 9.04

Similar Questions

• Please share the Script to retrieve the name of host, HBA, HBAstatus, WWN, pathpolicy and dualpathinfo

  Please share the Script to retrieve the name of host, HBA, HBAstatus, WWN, pathpolicy and dualpathinfo

  Take a look on Re: information on the host hardware with information about the HBA drivers and nic

• Configure the host and the VM on two separate wireless networks

  Hello community, I was a browser for a long time, but this will be my first post.

  I would like to begin by saying that I have always found the answer I was looking for by browsing these forums and that I browsed discussions thereon and consulted the chapters regarding virtual networks in the manual workstation 7.1, but at this stage were still unable to solve my problem.

  The scenario:

  I'm a small business working in a House (upstairs) / hookah lounge (bottom). We recently had a second internet connection (WORK), Internet home of my family (HOME), to provide our customers with a free wi - fi. I would use the connection of WORK (during our hours of downtime) in a Ubuntu VM for folding and seeding of torrents. I want to put this far on a network traffic will not affect the other.

  The network:

  SE host: Windows 7 Pro 64-bit

  (Host) NIC: Intel PRO/Wireless 3945ABG (Mini PCI)

  VM: Ubuntu 10.04 on VMWare Workstation 7.0.0 build-203739

  NIC (VM): Alfa awus036h (USB)

  
  

  The current configuration:

  Network connection is made, the State of replication physical physical network is unchecked.

  The Alfa is connected to the virtual machine and is no longer present on the list of the network adapters in Windows.

  It seems that I have to manually disable the "auto eth 1" interface or the virtual machine using the internet connection in host rather than the network of your choice that the Alfa connects to in VMWorkstation. The speed of the internet with eth auto 1 is connected is quick and consistent, but using it defeats the purpose. Strangely, when I go to network connections, under the "last use" for "eth 1 auto ' it is said 'never '.

  When "eth 1 car" is disconnected, it seems that the virtual machine uses the network wireless connected to the Alfa. But the internet speed is very slow and inconsistent. On downloads, the speed varies considerably; Also, it remains at 0 kb/s for a while before going to 80 KB/s, then works his way down to 0 kb/s again.

  Possible solutions:

  1. it's a driver problem for the Alfa inside the VM environment all this time?

  2 just misunderstood how to set up this kind of virtual network?

  3 is it possible to get the desired configuration by filling the WORK and VMnet0/1/8?

  * Note: Only VMnet1 and VMnet8 appear on the Windows network connections, however isn't VMnet0 bridged one responsible for networking?

  4. upgrade to the current version of the desktop would be useful?

  5. do this problem originally because of some settings on the router?

  * Note: The AP is close enough to provide a signal strength of 85-90%

  Sorry to be so talkative, I just wanted to be as clear as possible because I'm still a beginner to learn more about virtualization.

  Thank you in advance, as always, your help is greatly appreciated.

  First of all, I must say that when I did this last response, I've been on my Mac and I thought the configuration of a host of Windows XP however outside the nomenclature of the names of the host network settings dialog box the rest stands as it is on a host Windows 7 as described below, including a picture as an attachment.

  On a Windows 7 x 64 host with two network adapters, each on a different subnet and VMware Workstation 7.1.3 installed with the editor of virtual computer network configured for VMnet0 and VMnet2 jumpered separately to one of the host of NIC and I have not changed the settings for Windows 7 host NIC-1 and have network/Internet connectivity to the host of this NETWORK adapter as shown in the picture of Google in Internet Explorer on the host computer.  In VMware Workstation 7.1.3 I have a Linux Guest configured to use VMnet2, which is filled in the settings and the Windows 7 host NIC-2 have all with the exception of VMware Bridge Protocol unchecked and have network/Internet connectivity in the guest as indicated by Google in a browser.

  From the perspective of connectivity network between the host and the guest by NIC - 2 on the host computer when all with the exception of VMware Bridge Protocol unchecked there is no connectivity between the two on this subnet because there are no protocol at stake to allow the conversation to take place.

  So theoretically and in practice what I said previously, but didn't were not expressly with a Windows 7 host in mind, nevertheless what I said is true and accurate, as evidenced by world real test/use by what I said and with the image attached herein.

  FWIW Windows 7 has been configured with the default settings and the only changes to the host's network were those made during the installation of VMware Workstation 7.1.3 so with the configuration I discussed with the attached picture, there is no reason why the host and the guest cannot be on different physical networks and each network/Internet connectivity based on the information I have provided and they be isolated from each other by being on separate physical networks.

  That said, even if they can be isolated by being on separate physical networks can still can connectivity between the 2 through VMware shared folders it it turned on and of course & slide and other services so if absolute isolation is necessary to the point where it can be, and the guest still operating system run on a Virtual Machine in the host you would need to disable the Backdoor for VMware Tools cannot provide shared folders on VMware, & glide and other services.  So if you need this isolation level let me know and I will provide additional information to complete it.

• screensharingd does not accept the name of user and password

  Hello

  We have a mac mini which does not accept my credentials via screen sharing. I activated the remote access connection & remote management and set the password for VNC ("viewers VNC may control screen with password") to the same as my username "geertl".

  When I try to connect from another mac mini or an Ubuntu (with customer Remmina) system I always get the following error (system.log):

  7 June 18:01:01 screensharingd mac [2277]: authentication: FAILED: username: geertl: Viewer address: x.x.x.x: Type: DH

  VNC access is fine (with for example of TightVNC viewer):

  7 June 18:01:36 mac screensharingd [2282]: authentication: MANAGED: user name: N/A: Viewer address: x.x.x.x: Type: VNC WITH

  In this window VNC then enter my password and login without problem. SSH also works without problem from a Linux machine:

  ~ # ssh mac-l geertl sw_vers - productVersion

  Password:

  10.11.5

  It's just the screensharing who does not accept my password and/or username. Mac has been restarted, all reconfigured screensharing two through GUI as CLI, 'Account name' and 'Real name' were aligned and put different, none of them work. The firewall is disabled.

  We have another mac that is configured in the same way (same user name, same network,...) where the screen sharing works fine.

  Any pointer very appreciated!

  I had the same problem recently following a power failure.

  What I did to recover was to ensure that my Mac Mini was up and running - visible in the side bar of the finder.

  Then power rolled (stop) OSX on iMac and rebooted.

  Connections has then worked as expected.

  I would add, that my iMac and Mac Mini are running 10.11.5; and Yes, the problem only screen sharing.

• Impossible to connect a network drive by name of host but able to match with the ip address

  is the act as an application server and the file server. We use it as normal, but it is suddenly unable to resolve host name for other machines.

  All servers and workstations are not able to map the drive network under with the name of host, but every server and workstation still able to map the network drive with the IP address.

  When we try to connect the network drive with the host name, it invites with the error shows that there is error authorizcation.

  We tried and discover a few points as below for your reference:

  • Able to ping and resolve the hostname via all other servers and workstations.
  • Able to access the Terminal Server service name
  • Able to network with the IP address drive
  • Power of the card itself with the host name

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Lost computer internet wired host and work group

  Wired desktop host XP Home Edition has lost internet connection on a network shared with win 7 laptop wireless. Laptop computer has the internet connection on shared network, but do not pick up the host.  Only picks up residential and d-link bridge.  Host not to pick up cell phone, or a residential gateway.  Cannot reconnect because the TCP/IP settings are incorrect.  LAN and 1394 are send but not receive.  How can I restore internet on the host and the two working group? Working group name is always on both computers. Do I need to set up a new network and the Working Group?

  Thank you

  kbp

  Thank you my computer guy came and fixed it.

• Hosting and e-mail changes

  I'll soon take the responsibility of hosting and domain name for a client that I think their new website. As I will move the domain and hosting to my pack hosting, how do stand for their email - will I need to change anything at my end? Usually when I start a new Web site with a customer (rather roll over an existing domain) set up their email through my cpanel.

  See the following documents which can help to give an overview

  Add contact forms and style form widgets in Adobe Muse.

  Troubleshooting Muse form used on the servers of third party Widgets

• How to change the name of host server IMO?

  Hi, guru.

  Is it possible to change the name of host server IMO?

  Architecture:

  Server A - Oracle RDBMS

  Server B - IOM: admin, IOM, soa.

  Version of IOM - 11.1.2.1.0

  (If possible) it is necessary to change the server A server B in host names. During installation, the FQN to the server host names have been used.

  The procedure for changing the DB server host name is clear and simple. The question is on the server of the IOM.

  Unfortunately, I did find the documents that describe the process of change for the IOM system hostname. But fortunately the problem has been resolved.

  Shortly, the process is as follows:

  1. in my case: db oracle 11.2, wls 10.3.6, iam 11.1.2.1.0, soa 11.1.6. System - DB Server + server of IOM.

  2 VMS when copied to the new server.

  3. change the configuration files of MAC, IP, two servers.

  4. change the host name of the DB server. Restore the dbconsole EM repository (if used).

  5. change the IOM servers configuration with wlst listeners.

  6. change the source URL with wlst database IOM.

  7 remove the cache, tmp, newspapers of servers.

  8. replace all references to the old hostname with the new host name in the configuration files.

  9 start the administration server. Change in $DOMAIN_HOME/servers/AdminServer/tmp/_WL_user/em/hsz5x1/META-INF/emoms.properties configuration file

  10. restart Admin, start managed servers.

  11 change DirectDB, OimFrontEndURL, BackOfficeURL, Rmiurl SOA Soapurl URL in MS (change management of the cycle of life-11 g Release 2 (11.1.2.1.0) management), urls detail task human workflow.

  12. check the application code for direct reference for host name, change.

• VSphere client web - Remote Console error: unable to connect to the connection of mks (name of user and password) incorrect

  Hello

  I am running vmware Fusion on my mac computer. I created a domain with 2 vm ESXI, VSPHERE client and a DC inside the merger. My mac is not inside the area, but can access the area through clearOS router which is also inside the virtual machine. my mac has IP 192.168.2.x and my management in the 10.0.0.x field segment

  When I try to access a virtual machine on my esxi from my mac, I get the error failed to connect to the connection of mks (name of user and password) incorrect. I guess it has something to do with my mac is not in the area, but no idea how I can solve this problem?

  Thank you

  solved by adding the ip address of my ESXI in my macs hosts file

• What host and Service using TNSNAMES

  
  Hello

  I created a cluster 2 nodes (LAB4 LAB5) in 11 GR 2 grid Infrastructure, which currently holds my ASM Instance cluster

  I'm trying to determine which setting host and Service name I should use on a client to allow connect to ASM as a local connection to the node and connection of cluster.

  I'm tresting 3 types of assemblies of TNS below

  + ASM1 - a simple connection to the ASM instance directly LAB4 as if she was not grouped

  + ASM1_VIP - I think that it is of the old method of 10g to connect to the cluster?

  + ASM1_SCAN - I think it's the new way to 11 GR 2 to connect to the cluster?

  Since my node LAB4

  Grid1 [+ ASM1] > lsnrctl stat

  LSNRCTL for Linux: Version 11.2.0.4.0 - Production April 1, 2014 16:15:35

  Copyright (c) 1991, 2013, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.2.0.4.0 - Production
  Start date April 1, 2014 09:53:53
  Uptime 0 days 6 h 21 min 43 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /home/app/11.2.0/grid/network/admin/listener.ora file
  The listener log file /home/app/Oracle/diag/tnslsnr/Lab4/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.0.5) (PORT = 1521)))                         THIS IS MY address PUBLIC IP for this node
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.0.97) (PORT = 1521)))                         THIS IS MY VIP for this node
  Summary of services...
  Service '+ ASM' a 1 instance (s).
  Instance '+ ASM1' READY State, has 1 operation for this service...
  The command completed successfully

  The other shows, node listener (LAB5)

  Service '+ ASM' a 1 instance (s).

  Instance '+ ASM1' READY State, has 1 operation for this service...

  My server hosts file contains

  192.168.0.5 lab4 lab4.nms
  192.168.0.97 lab4-vip lab4 - vip.nms
  192.168.2.97 private lab4 lab4 - private.nms

  192.168.0.6 lab5 lab5.nms
  192.168.0.98 lab5-vip lab5 - vip.nms
  192.168.2.98 private-lab5 lab5 - private.nms

  192.168.0.100 cluster1-scan
  192.168.0.101 cluster1-scan
  192.168.0.102 cluster1-scan

  * I don't use DNS / GNS - where the 3 inputs static analysis

  So I put my client TNSNAMES as follws-

  The reason for the 3 types of connection, I mentioned at the beginning of this forum

  #ASM instance on LAB4 via public IP

  + ASM1 =
  (DESCRIPTION =
  (ADDRESS =
  (PROTOCOL = TCP)
  (HOST = lab4)
  (PORT = 1521)
  )
  (CONNECT_DATA =
  (SERVICE_NAME = + ASM1)
  )
  )

  #ASM instance on LAB4 via VIP audience that is the old method of 10g to connect to a cluster

  + ASM1_VIP =
  (DESCRIPTION =
  (ADDRESS =
  (PROTOCOL = TCP)
  (HOST = lab4-vip)
  (PORT = 1521)
  )
  (CONNECT_DATA =
  (SERVICE_NAME = ASM)
  )
  )

  
  #ASM instance on Cluster via Public Cluster SCAN, i.e. the new 11g method to connect to a cluster

  + ASM_SCAN =
  (DESCRIPTION =
  (ADDRESS =
  (PROTOCOL = TCP)
  (HOST = cluster1-scan)
  (PORT = 1521)
  )
  (CONNECT_DATA =
  (SERVICE_NAME = ASM)
  )
  )

  The good thing is that a TNSPING to my client to all the 3 entries above, succeed

  Q1. Name of the Service don't know '+' i.e. that why for the + ASM1_VIP and _ASM_SCAN entry above, I could put neither ASM the SERVICE_NAME and not + ASM?

  Q2. I presume that for the method of 10g - the name of the Service be indeed ASM and not ASM1?

  Q3. If LAB4 should fail, my other node, LAB5, would inherit of the LAB4 VIP

  Thank you

  Jim

  Hi Jim,.

  SCAN is for the client computer access to the clusterdatabase without having to know which server in the cluster is to serve the db. SCAN is for your normal databases NOT the asm instance, your customers do not need to access.

  To connect to your instance asm on each node with sqlplus and get an output of:

  See listener parameter setting

  It will show, that asm has local defined listener and will register with the listener node running on your virtual IP address. It will not appear an entry for the remote listener.

  For your no - ASM databases, you will find set remote_listener parameter and pointing to SCAN listeners usually via an entry in the tnsnames like this file:

  MYDB =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = your-rac-scan-name)(PORT = XXXX))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = mydb)

  )

  )

  lsnrctl status

  -> you will get the output of the listener node

  lsnrctl status LISTENER_SCAN1

  -> you would give the output of the listener to scan if SCAN1 runs on the node of your ssh shell is sitting.

  Concerning

  Thomas

• Script of PowerCLI to measure the number of host and its virtual machine in each cluster

  Hello

  I'm trying to create a script on regular which gives an output of the host and virtual machine into a cluster of vcenter as below counties.

  Cluster:                                                      VMHost                         VM's

  Cluster01                                                     04                                  15

  cluster02                                                      02                                  35

  Simply using a sample onliner

  Get-VMHost | Select @{N = "Cl"; {E = {Get-Cluster - VMHost $_}} name, @{N = "NumVM"; E={($_ | Get - VM). County}} | Cluster of kind, name

  any ideas? Thanks in advance

  Kind regards

  Subash.

  Try this:

  Get-Cluster | Select Name, @{N="Host Count"; E={($_ | Get-VMHost).Count}},  @{N="VM Count"; E={($_ | Get-VM).Count}}
  

• Creating a folder only runs in the hosts and Clusters discovered

  Greetings,

  I am creating folders [as I did through the heavy client] under the computers view virtual and models > Datacenter 'x' and [these are blue records] with VM.

  Yet, when to use the PowerCLi command: Get-Datacenter "x" | New-file - name 'test' [these are yellow]

  
  ONLY, it will create the folder under the view hosts and Clusters $toplevel.

  What command (if possible) would allow me to create folders in the same data center, yet computers VIEW virtual and models. ??

  I can explain it if necessary.

  But you must use the hidden folder called "vm" (as in my code).

  Then your new blue folder will be created directly under the data center.

  The code you have found does exactly the same thing (that vmfolder is actually the "vm" hidden folder I mentioned), but it's a long journey of following pointers

• Port sharing ethernet physycal between the Mavericks and Ubuntu using VMware Fusion

  Hi all

  I use VMware Fusion on Mac OS Mavericks 6.0.2, and I need to connect a physical device to manage using a Ubuntu 12.04 VM. In addition, the host computer is connected to a public network, using a Wi - Fi connection.

  I put the ip of the physical device by USB configuration, but I was unable to get by using ethernet or the guest or the host computer. I tried to configure the NIC of the NAT guest, as well as the bridge too. Nothing seems to work. I don't know if the virtual machine is able to handle the physical Ethernet port.

  Ideas for the configuration of the network device (NAT, bridget, etc.) or the ip configuration?

  Thank you very much in advance.

  Sorry, I left an important step.  You must also configure the host's Ethernet card to use a manual IP address in the same subnet assigned to the Virtual Machine and the sensor.

  1. connect sensor card via USB and set the IP address and subnet mask, disconnect USB.

  2. connect the sensor to the host (Mac) Port Ethernet card.

  3. in the Apple menu > Preferences system... > network > Ethernet > configure IPv4: manually, then set the IP address: and the subnet mask: properly.

  4. from the Virtual Machine settings > network adapter > Bridged Networking > Ethernet

  5. in the guest OS virtual machine to set manually the appropriate IP address and subnet mask.

  Example:

  The IP address of the host on the Ethernet adapter: 192.168.3.1 subnet mask: 255.255.255.0

  Guest OS Ethernet adapter IP address: 192.168.3.2, subnet mask: 255.255.255.0

  Sensor onboard IP address of the Ethernet card: 192.168.3.3, subnet mask: 255.255.255.0

  In this example, the sensor Council will be addressable by the host or the guest to 192.168.3.3.

  BTW I just tested it using my Thunderbolt Display Ethernet with a normal cable (straight not crossed) RJ45 connected directly to a device addressable IP, VMware Fusion and a virtual Windows machine.  Although the same works with an Ubuntu VM as I have in the past also.

  This should work without any problem but make sure that the firewall or other security software on the host and guest are not blocking communications!

• Management of VMs: Which one to use, "hosts and Clusters" or "models and virtual computers.

  Hi all

  As the subject says, when you manage virtual machines, which is better to use? Hosts and Clusters? Models and virtual computers?

  It's our facility:

  Previously we had only been using "Hosts and Clusters" manage all of our virtual machines. We organize objects of the individual within vApps and Resource Pools. We had also installation on these both parent objects permissions for who has access to what.

  Basically, we have about 12 members. Everyone has their own virtual machines that they use for training, etc. We manage centralized via AD with users and groups user access. We also have some users assigned to some hosts to maintain the level of things between the two hosts. Our license does not DRS, BTW.

  I just replaced our server vCenter in preparation for our 4.1 vSphere upgrade later this year, Yes, we are on vSphere 4.0 currently. So I went ahead and 'computers models and virtual"allowing to create user folders, gave users access and placed virtual machines of all users within these folders. (I heard recently that the use of the hosts and Clusters was semantically incorrect). Even if they have access to their folder, they cannot create a virtual machine because they cannot access a host. A computer file virtual and models can be assigned to a host?

  I didn't assign permissions to each user in order to add to each host, because I didn't want others to mess with other virtual machines. All users previously red access only, but sinc the virtual machines and templates folders are not assigned to any host, they can get in their folder to create and manage their virtual machines.

  Then, I go on this wrong all the models and virtual computers and do I just keep using our hosts and Clusters of installation above permissions groups?

  Any advice on the semantics in this would be appreciated.

  Thank you

  Johnathan

  All,

  I solved my problems.

  Check book Scott Lowes ' Mastering VMware vSphere 4 "Chapter 9, he described the use of Resource Pools to the VM group under the view of the hosts & Clusters. Using the same names as the files under VMs & models and adding the same permissions, I was able to force every user to use their own folder under VMs & templates and only their Resource Pool under hosts & Clusters. So now the two views reflect the objects of each user and their access controls are correct.

  Items to remove this Lessines:

  Use Of Resource Pools under host & Clusters to manage the default host for users.

  Files under VMs & models allows you to manage virtual machines model announcement for each user (simple view).

  Thanks for the help,

  Johnathan

• ERROR: ORA-01017: name of user and password invalid. connection refused

  Hi all

  I need your help.

  I have installed Oracle Audit Vault Server Release 10.2.3.2 in agent collection and Linux system in Windows system. Adding and start collecting DBAUD went fine however adding AGAIN collector back return errors when executing command avorcldb add_collector as follows

  [oracle@avsrv ~] $

  [oracle@avsrv ~] $ avorcldb add_collector - SrcName orcl nom_agent - avagent01 - colltype REDO - av Lugaopc:1521:orcl

  collector REDO_Collector for orcl source already exists

  the initialization of the REDO Collector

  ERROR: could not get by using jdbc connection AV source user:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))

  ERROR: ORA-01017: name of user and password invalid. connection refused

  [oracle@avsrv ~] $

  Here are the contents of the avorcldb.log file

  09/09/13 16:58:44 [INFO] command add_collector treatment

  09/09/13 16:58:44 [INFO] treatment arg - FromName = orcl

  09/09/13 16:58:44 [INFO] treatment arg - nom_agent = avagent01

  09/09/13 16:58:44 [INFO] treatment arg - colltype = REDO

  09/09/13 16:58:44 [INFO] treatment arg - av = Lugaopc:1521:orcl

  09/09/13 16:58:44 [INFO] connect information: Lugaopc:1521:orcl

  09/09/13 16:58:45 [INFO] connecting administration AV got using jdbc:oracle:oci:@AVDB

  09/09/13 16:58:45 [INFO] execution SQL like [ADM@AV] select s.host |': ' | A1.num_value |': ' | avsys.av A2.char_value $attrvalue a1, a2 avsys.av$ attrvalue, avsys.av$ s source, avsys.av$ attrdef ad1, ad2 avsys.av$ attrdef where source_name =: 1 and a1.inst_id = s.source_id and a2.inst_id = s.source_id and a1.attr_id = ad1.attr_id and ad1.attr_name = 'PORT' and a2.attr_id = ad2.attr_id and ad2.attr_name = 'DB_SERVICE. '

  09/09/13 16:58:45 [INFO] using bind value orcl

  09/09/13 16:58:45 [INFO] Return value = Lugaopc:1521:orcl

  09/09/13 16:58:45 [INFO] connect information: Lugaopc:1521:orcl

  09/09/13 16:58:45 [INFO] execution SQL like [ADM@AV] select to_char (source_id) in the avsys.av$ source where source_name =: 1

  09/09/13 16:58:45 [INFO] using bind value orcl

  09/09/13 16:58:45 [INFO] return value = 1

  09/09/13 16:58:46 [INFO] got the source user connection using jdbc:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))

  09/09/13 16:58:46 [INFO] executing SQL in [ADM@AV] select decode (c.status, 1, 'active', 0, 'fallen', null) of avsys.av$ collector c, avsys.av$ s source where source_name =: 1 and collector_name =: 2 and c.source_id = s.source_id

  09/09/13 16:58:46 [INFO] using bind value orcl

  09/09/13 16:58:46 [INFO] bind Using REDO_Collector value

  09/09/13 16:58:46 [INFO] Return value = active

  09/09/13 16:58:46 [MESG] collector REDO_Collector for orcl source already exists

  09/09/13 16:58:46 [INFO] executing SQL in [ADM@AV] select decode (c.status, 1, 'active', 0, 'fallen', null) of avsys.av$ collector c, avsys.av$ s source where source_name =: 1 and collector_name =: 2 and c.source_id = s.source_id

  09/09/13 16:58:46 [INFO] using bind value orcl

  09/09/13 16:58:46 [INFO] bind Using REDO_Collector value

  09/09/13 16:58:46 [INFO] Return value = active

  09/09/13 16:58:46 [MESG] initialization REDO Collector

  09/09/13 16:58:46 [INFO] execution SQL like [ADM@AV] select the username of avsys.av$ source where source_name =: 1

  09/09/13 16:58:46 [INFO] using bind value orcl

  09/09/13 16:58:46 [INFO] Return value = AVSRCUSR1

  09/09/13 16:58:46 [INFO] as [ADM@AV] SQL execution {? = call avsys.dbms_audit_vault.reset_source_user (?)}

  09/09/13 16:58:46 [INFO] adding user password mask

  09/09/13 16:58:46 [INFO] execution SQL like [USR@SRC] select table_name from user_tables where upper (table_name) = upper(:1)

  09/09/13 16:58:46 [INFO] bind Using STREAMS_HEARTBEAT value

  09/09/13 16:58:46 [INFO] Return value = STREAMS_HEARTBEAT

  09/09/13 16:58:46 [INFO] execution as [USR@SRC] SQL drop table streams_heartbeat

  09/09/13 16:58:46 [INFO] execution as [USR@SRC] SQL create table streams_heartbeat (src_dbname varchar2 (4000), job_number number, heartbeat_time timestamp)

  09/09/13 16:58:46 [INFO] execution SQL like [USR@SRC] declare dbs_name varchar2 (4000); start selecting rename in dbs_name from global_name; insert into streams_heartbeat values (dbs_name, 0, SYSTIMESTAMP); end;

  09/09/13 16:58:46 [INFO] SQL execution as [USR@SRC] create or replace procedure update_heartbeat IS start update streams_heartbeat set heartbeat_time = (select systimestamp from double); commit; end;

  09/09/13 16:58:46 [INFO] execution SQL like [USR@SRC] select table_name from user_tables where upper (table_name) = upper(:1)

  09/09/13 16:58:46 [INFO] bind Using CAPTURE_RULES value

  09/09/13 16:58:46 [INFO] Return value = CAPTURE_RULES

  09/09/13 16:58:46 [INFO] execution as [USR@SRC] SQL drop table capture_rules

  09/09/13 16:58:46 [INFO] execution as [USR@SRC] SQL create table capture_rules (nom_regle varchar2 (50), rule_scope varchar2 (6), rule_type VARCHAR2 (3), obj_name varchar2 (100))

  09/09/13 16:58:46 [INFO] execution SQL like [ADM@AV] select Rename global_name

  09/09/13 16:58:46 [INFO] Return value is AVDB. AVSRV

  09/09/13 16:58:46 [INFO] execution SQL like [USR@SRC] select db_link in user_db_links where db_link =: 1

  09/09/13 16:58:46 [INFO] Using AVDB bind value. AVSRV

  09/09/13 16:58:46 [INFO] Return value is AVDB. AVSRV

  09/09/13 16:58:46 [INFO] the Execute SQL as database link [USR@SRC] drop "AVDB. AVSRV ".

  09/09/13 16:58:46 [INFO] execution SQL like [USR@SRC] select the version of v$ instance

  09/09/13 16:58:46 [INFO] Return value = 11.2.0.1.0

  09/09/13 16:58:46 [INFO] creating DB link using AVDB. AVSRV, AVSRCUSR1, {avsrcusr_pwd}, Lugaopc, 1521, orcl

  09/09/13 16:58:46 [INFO] login as srcuser_ora01 to @(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=Lugaopc) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = orcl)))

  09/09/13 16:58:46 [INFO] output of SQLPlus

  09/09/13 16:58:46 [INFO]

  09/09/13 16:58:46 [INFO] Package created.

  09/09/13 16:58:46 [INFO]

  09/09/13 16:58:46 [INFO] no error.

  09/09/13 16:58:47 [INFO]

  09/09/13 16:58:47 [INFO] package body created.

  09/09/13 16:58:47 [INFO]

  09/09/13 16:58:47 [INFO] no error.

  09/09/13 16:58:47 [INFO]

  09/09/13 16:58:47 [INFO] Package created.

  09/09/13 16:58:47 [INFO]

  09/09/13 16:58:47 [INFO] no error.

  09/09/13 16:58:47 [INFO]

  09/09/13 16:58:47 [INFO] package body created.

  09/09/13 16:58:47 [INFO]

  09/09/13 16:58:47 [INFO] no error.

  09/09/13 16:58:47 [INFO] execution SQL like [USR@SRC] select distinct name of user_errors, whose name =: 1

  09/09/13 16:58:47 [INFO] bind Using DBMS_SRC_STREAMS_COLLECTOR value

  09/09/13 16:58:47 [INFO] Return value = null

  09/09/13 16:58:47 [ERROR] could not get by using jdbc connection AV source user:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))

  09/09/13 16:58:47 [ERROR] ORA-01017: name of user and password invalid. connection refused

  java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused

  at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:765)

  at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:414)

  to oracle.jdbc.driver.PhysicalConnection. < init > (PhysicalConnection.java:546)

  to oracle.jdbc.driver.T2CConnection. < init > (T2CConnection.java:162)

  at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:53)

  at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)

  at java.sql.DriverManager.getConnection(DriverManager.java:525)

  at java.sql.DriverManager.getConnection(DriverManager.java:140)

  to oracle.av.avca.jdbc.JdbcConnection. < init > (JdbcConnection.java:87)

  at oracle.av.orcldb.DAO.initConnection(DAO.java:79)

  to oracle.av.orcldb.DAO. < init > (DAO.java:64)

  at oracle.av.orcldb.commands.AddCollector.setupCollector(AddCollector.java:746)

  at oracle.av.orcldb.commands.AddCollector.execute(AddCollector.java:230)

  at oracle.av.orcldb.Command.process(Command.java:89)

  at oracle.av.orcldb.Main.process(Main.java:118)

  at oracle.av.orcldb.Main.main(Main.java:132)

  I searched the forum at my best level without clear solution

  Concerning

  Sadik

  avorcldb add_collector - REDO SrcName orcl nom_agent - avagent01 - colltype - av Lugaopc:1521:orcl

  Specify the connection string to the Vault check server not in the source database