Host process generic for win 32 services has encountered a problem error message

Similar Questions

• Get error "Generic Host Process for Win 32 Services has encountered a problem.

  Original title: generic host and other problems

  I'm using XP Prof SP3. I have following problems: 1. get "Generic Host Process for Win 32 Services has encountered a problem..." ' 2. audio past. 3. can't get wndows update downloads, 4. Security Center says "... not started or was stopped. Help please.

  Open the command prompt and type this:

  sfc/scannow

  Let the run command, if the problem has not resolved, try the system restore and restore your system at a time before the problem happens.

• Error message Windows XP released "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp

  Error message Windows XP Home Edition comes out "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp. I found the article exactly to what I have experienced http://support.microsoft.com/kb/821690 but as far as I know, this issue is not caused by an old HP printer. Can you give me the steps to fix this problem other that that link I mentioned. Thank you.

  Hello

  ·         You have a HP printer connected to the computer?

  If so, try the article you mentioned.

  Generic host process error message and a flashlight icon appear

  If this is not the case, check to see if this article helps you.

  Error messages when you start a Windows XP-based computer and then try to download Windows updates

• Error "Generic Host process for Win 32 services has encountered a problem and needs to close." Sorry for the inconvenience. "Please tell MIcrosoft this problem."

  Original title: programs appearing and disappearing

  Generic Host process for Win 32 services has encountered a problem and needs to close.
  Sorry for the inconvenience.
  Please tell this problem to MIcrosoft. We have created an error report that you can send to help us improve the generic
  Host Process for Win 32 Services. We will treat this report as confidential and anonymous. To see the data click on send
  Error report or not send.
  I clicked on the error report, and that's what he said... szAppname:svchost.exe szAppver: 5.1.2600.5512
  szModver: 5.1.2600.5755 szModname: ntdll.dll compensate 00023845 etc, etc.

  Hi 1jimbo1,

  1. when exactly you receive this error message?
  2. did you of recent changes to the computer?

  Method 1:

  Step 1:

  You can try to start in safe mode and check if the problem occurs.

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If the problem does not happen in safe mode and then, try to perform a clean boot.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

  After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

  Method 2:

  You can also check the following link and complete the scan line on your computer to check whether your computer is infected with a virus or not.

  http://OneCare.live.com/site/en-us/default.html

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• I get a message that Generic Host Process for Win 32 Services has encountered a problem and needs to close. How can I get rid of this? It freezes everything up.

  I don't really know what the good topic for this problem.  I get the message that Generic Host Process for Win 32 has encountered a problem and needs to close.  I need to get rid of it because it freezes everything up.  No matter if I send or not send the message to Microsoft.

  Hi ArdythPhillips,

  ·         Exactly when you receive this error message?

  ·         You did it of any material changes or software on the computer before this problem?

  This problem may occur if you use an old HP printer driver or an old HP scanner driver.

  If you are using an HP printer, you can follow this link.

  Generic host process error message and a flashlight icon appear

  To improve the performance of the computer, you can follow this link & check if it helps.

  Restore the performance of your computer with Windows XP

  Hope the helps of information.

  Please post back and we do know.

• Error message: Generic Host Process for Win 32 Services has encountered a problem and __needed to close.

  I get this error message every time I open any application that is internet Explorer, gaming applications, no matter what.

  Shortly after this message appears, another appears informing the system shutdown after 60 second countdown. Fixes for this?

  Cite your version of IE and the full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  How did your problem related to Windows Update?

  There is a good chance that you see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired at the time where the machine all first infected or your subscription has expired since the machine is not kept fully corrected in Windows Update, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Otherwise, run a thorough for hijackware, including showing the papers required in an appropriate forum.

  Verification / help with Hijackware
  http://MVPs.org/winhelp2002/unwanted.htm
  http://inetexplorer.MVPs.org/data/prevention.htm
     http://inetexplorer.MVPs.org/tshoot.html
  http://www.MVPs.org/sramesh2k/Malware_Defence.htm
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  * Chances are you will need to seek the assistance of experts in http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.php, or other appropriate as well.* *.

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite Pro A60: Generic Host Process for Win32 Services has encountered a problem

  Satellite Pro A60 - Win XP Pro SP2.
  I recently started getting this error:

  "Generic Host Process for Win32 Services has encountered a problem and needs to close." We are sorry for the inconvenience. »

  and I was wondering if there are any known issues specific to Toshibas or specific to the operating system?

  Any guidance advice appreciated.

  Well, it could be a virus or malware.
  I recommend you to update all your anti anti-virus applications and if you have not installed a program such as ad-aware or spyware so you need to do.

  Check if your all the service pack are up-to-date. Last use the installtion of new OS could help

• I get the error "Generic host process for Win32 services has encountered a problem and needs to close."

  Original title: I'm under Win XP Pro 64-bit with an amd processor.

  Hi all

  I get "Generic host process for Win32 services has encountered a problem and needs to close" when I first start the computer, the sound works, but after the old generic host appears the sound does not work?  Don't forget that I'm running 64-bit software.

  The search does not work.

  Any help would be great.

  Hi bohawk,

  I got to hit this article the error that you are experiencing with your computer. Refer to the same thing, check if the patch is useful.

  I hope this helps. If this isn't the case, answer so we can look for other options.

• How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3

  How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3.

  When I close this error or click on send or do not send, my session network remote also network mapped drive United Nations accessible then I restart my computer and I can access my network grows but after awhile once again this error and the same network behavior that I discussed earlier.
  someone has a better solution that take care of this problem.

  Hello

  Given that the problem is related to the server of the IRIS, IRIS Contact support for assistance:

  http://www.IRISLink.com/C2-1967-189/I-R-I-S---technical-support.aspx

  Hope the above information is helpful.

• Generic host process for win32 services has encountered a problem and cannot update windows

  Whenever I start my computer, I get this error message "generic host process for win32 services has encountered a problem and needs to close." The details of this problem are:

  (szappname:svchost.exe), (szappver:5.1.2600.5512), (szmodver: 0.0.0.0), (offset: 001 has 6240), (szmodname: unknown)

  c:/DOCUME~1/owner/locals~1/temp/wer94ea.dir00/Svchost.exe.mdmp

  c:/DOCUME~1/owner/locals~1/temp/wer94ea.dir00/appcombat.txt

  I also send an error report whenever this happens.

  The computer is running XP, but lately some settings have been changed such that the display is windows classic instead of XP.

  In addition, I can't run Windows Update completely. It freezes / hangs up in the middle of the update. I have also no audio.

  Please help, I ran SuperAntispyware, Spybot, and Avira. I'm lost!

  Reinstalling the operating system is unable to solve your problem. There is no need to do this if the problem is not related to the operating system and you find that you are back where you started.

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Take a look in the system and Application logs in the errors and warnings event viewer and post here the copies. Do not post on that more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  Hope this helps, Gerry Cornell

• "Generic Host Process for Win32 Services has encountered a problem and needs to close." We are sorry for the inconvenience "_".

  After that I connect Internet in 10 minutes and 2 hours sometimes this messega Popes until one disconnects me Internet... I have dial up so when I try to reconnect it says does not detect a modem or a virus protection... then to start my computer acting funny i have to restart. What can I do to fix this?

  Hello

  We recommend that you reinstall the network adapter driver and check if the problem persists. To do this, visit the site of the manufacturer of the system or the network card and download the driver compatible Windows XP and then install on the computer.

  If the problem persists, try the following steps:
  Step 1: Check if a system file is corrupt
  a. Click Start, click Run, type cmd and click ok.
  b. at the command prompt, type sfc/scannow and press ENTER.

  Note: You will be asked to insert the Windows XP disk, if a file is missing.

  For more information, see Description of Windows XP System File Checker (Sfc.exe)

  Step 2: If the problem persists, restore the computer
  see How to restore Windows XP to a previous state .
  b. check if the problem persists.

  Also check if one of the following articles will help you in fixing the issue.
  1 displays generic host process Error Message and a flashlight icon
  2 see Generic Host Process for Win32 Services has encountered a problem and needs to close.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I fix error Pure Networks Platform Service has encountered a problem and needs to close. We are sorry for the inconvenience.

  Whenever my computer load I get this darn error. Pure Networks Platform Service has encountered a problem and needs to close.  We are sorry for the inconvenience. I also get a pop up nmsrvc.exe Application error. The statement as "0x66f23ff0" referenced memory at "0x00000000". The memory could not be 'read' PLEASE HELP!

  Hi heat110,
   
  -What is the brand and model of the router you are using?
   
  -You "Network Magic" software installed on your computer?
   
  Method 1: As a first step, try to restart the service of Pure platform of networks on your computer.
   
  Follow these steps to do the same thing:
   
  a. Click Start. Click run. Type Services.msc and press ENTER.
   
  (b) in the Services window, search for Pure Networks Platform service.
   
  c. right-click on the service and click on restart.
   
  d. restart the computer and check if you have got rid of the error message.
   
  Method 2: Uninstall Network Magic software and then re - install the software by downloading from the website of the manufacturer if necessary.

• Map of perf service has encountered an internal error

  Hi all

  We are in the process of establishing a new battery of vSphere 4.0 Update 1.

  Trying to access the graphical performance of our vCenter Server overview page all we get is the following error:

  Perf map service has encountered an internal error.

  Message: The report application initialization is not completed successfully. Retry in 60 seconds.

  Please note that our vCenter server to connect to a local SQL Server 2005 Standard Edition RDBMS (we do not use approved connection, here). According to our security policies, the SQL2005 instance is configured to listen on a non-standard port (i.e. different from 1433, the default).

  I found several posts in the VMware communities, but unfortunately none of the proposed steps allowed us to solve our problem.

  I also found the document following Ko from VMware:

  http://KB.VMware.com/kb/1013877

  and tried to set up the connection string of an appropriate Tomcat as follows (in the context.xml under C:\Program Files\VMware\Infrastructure\tomcat\webapps\statsreport\META-INF file) but again without success:

  JDBC:SQLServer://VCSRV01:3341; DbDriver = com. Microsoft.SqlServer.JDBC.SQLServerDriver; IntegratedSecurity = false; DbUser = vcsrv

  It seems that in the context.xml file settings are not read at all by Tomcat.

  We also tried instance reconfigures the SQL2005 momentarily to listen to its value default (1433) port, and in doing so, the graphic performance overview page works as expected.

  Unfortunately our security policies do not allow us to maintain this configuration, and so we can't really leave the RDBMS set up to listen on the default port.

  Is there a way we can substitute such a constraint in order to properly configure the graphic performance overview page to work as due to a non-standard configuration of SQL2005?

  I read from another source that there may be a way to configure all the required settings in the registry of the vCenter server, in the following key, but I don't know what and how to specify here:

  HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC. INI

  Thanks a lot in advance for your kind help.

  Best regards

  Salvatore

  SKY Italia s.r.l.

  Good afternoon

  We had exactly the same problem. VC on a single server, SQL DB on another server and a non-standard port of SQL. The only way I can get this to work is to examine the ODBC settings in the registry (they can be under Wow6432Node if you use 64 bit 2008) and add a value called database with the name of the database of VC and then change the value of server < Server >, < Server > < PORT > : < PORT >. If I restart the Web VC overview table management service works. The bad news is that VC does not start unless I change the value of server to use a comma instead of a colon. This means that the server value must be changed to use the colon, restarted Web VC management service, and then the value of server changed to use a comma after each reboot the VC server.

  It's a pain, but it doesn't seem to work.

  Maybe someone at VMware will be able to tell us why it behaves in this way.

  Kind regards

  Dave.

• TCP/IP services has encountered a problem and need to close. Windows Server 2003 R2 SP2

  TCP/IP services has encountered a problem and need to close.

  Windows Server 2003 R2 SP2

  That left me without a network or to the Internet on a PDC named DOMCON.

  Tried so far:

  1. last signed NIC drivers installed (8.0.27.0) to HP NC3120 Fast Ethernet NIC.

  2 netsh int ip reset resetiplog.txt

  reboot, enter the details of the intellectual property, etc... NO JOY!

  This server has been running for years until now.

  I can join the registry and files DOMCON_MpsReports.cab NetworkSubkey.reg section.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Here is the link:http://technet.microsoft.com/en-us/windowsserver/bb512919.aspx

• Get an error asus eee pc acpi service has encountered a problem and needs to close "and widows crashes"

  OP: AppName: asacpisvr.exe_ AppVer: 6.1.1.36_ ModName: unknown__ModVer: 0.0.0.0_ Offset: 1000b63e

  tried to clarify some of my options in "run" and I have not typed msconfig startup required and I made a few small changes and now an error message is popping up saying "asus eee pc acpi service has encountered a problem and needs to close" and it keeps popping up. So I went back after it rebooted and has defeated the changes and restarted again and it the error message keeps coming back!

  Hello, Gina Cecchetelli,.

  The error message and the event log indicates that the problem is related to the ACPI driver. I suggest you reinstall the ACPI driver and check if you have the same problem. Here is a link I found on the Asus website support to download the ACPI driver:

  http://support.ASUS.com/download/download.aspx?model=Eee%20pc%201005P&F_NAME=HotkeyService-1_15.zip&f_type=26&OS=29

  Note: Install the driver requires professional help. I suggest you to contact Asus to help you best in the installation of the drivers.

  You may also need to update the Chipset drivers. You can contact Asus to help you with this:

  Here is a link that will give you information about Support for Asus information:

  http://support.ASUS.com/contact/contact.aspx?SLanguage=en-us

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.