Host Windows 7: Win XP Pro SP 3 comments: comments can ping hosts Internet but IE

Similar Questions

• I have win xp pro installed on my device need to be formatted, but I forgot the key to product, sort of take my product key. ?

  Failed product key

  I have win xp pro installed on my device need to be formatted, but I forgot the key to product, sort of take my product key. ?

  I prefer Belarc Advisor - www.belarc.com - because it gives a lot of other information, which is useful in preparation to a reformat/reinstall.

• Windows 7 Home premium network problem, computers can access the internet, but they do not see each other on the network

  I was trying to set up a homegroup on my main computer, but on the second computer, I never had the opportunity to join the homegroup. I'm sure that I have everything set up properly, but I can't get the second computer to join.

  I have a switch that my internet runs and a cat cable goes to each computer. Each computer can access the internet without any problem, but none appear in other network list. They have the same name of working group, I just can't understand it. I use Windows Firewall.

  Any help would be greatly appreciated.

  Maybe this can help.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Comments can ping host, but host cannot ping the prompt.

  Hello. I already asked this question in another discussion, but it has a different title, so I decided to ask my question in a new discussion.

  Host: Windows 7, 192.168.186.1, no gateway IP

  Client: Windows XP, 192.168.186.2, no gateway IP

  If the ping of the comments reached the host. But when I try to ping the host's comments, I get '100% packet loss. How it could be explained?

  I take a look at the Windows Firewall on computers and make sure that it is disabled.

• Under Win XP pro. PS 3: I can only do a restore in safe mode?

  It is this way for years.

  Hi 1Flyingstar,

  ·         What happens when you try to perform a restore in normal mode?

  ·         You get the error message?

  ·         Are you referring to the system restore?

  If you are referring to the restoration of the system, follow the steps in the article.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

• have replaced vista Home Premium, with a fresh install of Win 7 pro full of detail. Can I use Vista lic. on a new box as it will always be active on one box only?

  the question in the title,

  Hi, Jim,.

  Windows 7 update?

  If a version upgrade, I do not think so because if detects before installing the files of the previous OS (Vista).  If the previous operating system is not there, it will not be installed.

  If you have wiped the drive and installed Windows 7 and Windows Vista is the OEM supplied with the system, version no.

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/transfer_oem_licenses.aspx#fBid=F3WD8OAEVS9

  Golden rule: a license installed on a PC

  A retail version of Windows Vista could be transferred from one pc to another if the previous pc is wiped.

• Failure of KB967912 Windows Vista updated 10 x today and the computer can't access internet

  My new ACER Vista Office tried to install this update 10 x, today. It started while I was working this afternoon. Until that moment, I had a complete connectivity via a cable CAT5e LAN accessing a router and cable modem. Later, I lost the first internet and local network access. Before that, I had worked with Firefox, Windows Media, and financial software and everything was accessed successfully the ' net. Then, I tried to configure Microsoft Outlook 2007 to get my email. His inability to access my cable provider was the first idea I had that I didn't have connectivity.

  Each time, I had the exclamation point on the stop switch and Vista stops with the view that he was installing "Update 1 of 1. However, whenever I rebooted the update didn't install.  Also, I had to restart my modem and router every time to regain access to the internet for short periods of time; in less than 4 to 7 minutes, all access to the internet is lost again. The error code was Code BC2 the last couple of times, but before that I also got error Code 80200053 when an Office update also failed to install. (I was able to install the Office update successfully, after another restart and cycle the modem to regain power connectivity).

  Help! FYI, I had to find another computer even to post this question!

  Ann

  Hi AnnFr,

  Thanks for posting the question.

  The KB967912 refers to the essentials automatic updates. A workaround for this problem is uninstall all MSN "stuff", resettlement using the latest version, which includes this update.

  To download the latest version visit this site:
  http://download.live.com/

  Kind regards

  Cedric M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Comments and host OS can ping each other; but all the other hosts on the same subnet cannot ping guest OS

  I use Bridge network.  I tried to delete and recreate the NIC (did not help). I've upgraded to the latest version of VMware Server (20.0.0 build 122589) with the same result. Stub here. Anyone have any ideas? Thank you.

  What is your host and guest operating system? Are WHAT NIC configured correctly (IP, DNS, gateway, etc.).

  Are all necessary ports (firewall, antyvir)?

  J.

• 8 Win 64 pro can not see my PVR, can it ping with the IP address, but not windows name network can't see at all.

  8 Win 64 pro cannot see PVR, can ping by IP, but not by name. Another computer laptop win 7, can see PVR and ping by IP address or name. 8 Win can see win 7 laptop.

  What should I do to get the win 8 portable see PVR.
  Thank you

  See http://www.tvix.co.kr/ENG/faq/default.aspx?bserial=0&act=RD&id=390 .

  There may be a problem of security of Windows 8. Versions of Windows are more strict on security policies. DIVCO must pay the Samba, unless the option is open to you as a user.

• Win 8 pro

  my new computer says win 8 pro is bein use, how can I remove it from my old computer?

  I'm trying to add features to windows 8 pro and it say another cp uses this product key so now I can't activate windows unless I have buy a product key, I would like to remove the added features and go back to what I had.

  I would like to have it the way it is the basic window, I am able to remove windows 8 pro 8. Help me please.

  model # 20 - b014

  Pro # A3201aa #aba

  SERIES # {information}

  WIN 8 CP NEW BASE

• Win 7 Pro 64 install, after good connection install & internet Microsoft Update hangs forever

  A failed hdd on HP 6515 b required new hdd & install Win 7 Pro 64. After the proper installation & connection internet Microsoft Update hangs forever. Otherwise the computer works fine. We need .net updated for special application.

  Unfortunately, this happens to a lot of people lately.

  Windows Update problem (new)

  The following procedure applies in the case of installation (reinstall) Windows 7.  It does not apply to a usual, normal day.

  I'm afraid that you will do the reinstall again.  Not a terrible penalty to pay.  Usually takes less than an hour.  Then immediately proceed to the next procedure.   It's strange, but it really does work and many people have proved it.

  NEVER install anything other than Windows updates until your system is up-to-date.  Once you have the list update, install all together.  Installation of updates in batches is not expedite the process or do better.

  1. Before you begin to re - install, download (32 or 64 bit) KB3083710 and KB3102810 in advance and store on a USB
  2. Start and end the re - install Windows 7 SP1
  3. Before that the newly installed system can go online for the first time, Disconnect the computer from the Internet.  This chronology is essential.
  4. Install KB3083710 and reboot manually.
  5. Install KB3102810 and reboot manually.
  6. Restore the Internet connection, and run Windows Update as usual.
  7. After a few minutes, you should have a lot of updates to download and install.

  Thanks to Ken Morely

  Note: When you search for the 64-bit version of these KB specify 64-bit.  The 32-bit versions do not say what version they are.

• Win 8.1: update Win 8 (Pro)

  Hello

  1. may I know what is the release date to win 8.1?

  2. can I put what I did Win 7 (Pro) to Win 8 (Pro) without losing my software and data files present (instead of install)?

  3 my current version of window is Win 8 (Pro), when it upgrade, it is automatically upgraded to win 8.1 (Pro)?

  4. What is the estimated to Win 8.1 download file size?  < 1="" gb, =""> < 1.5="" gb, =""> 2 GB, between 1.5 GB to 2 GB?

  Grateful if someone knowledgeable could bring me answers of thye.

  Thank you

  Low

  The update will be deployed in windows update, so no need to you what, 18

• LR 6 downloaded. Error - cannot be installed on 64-bit system, I have Win 7 Pro 32 bit

  Bought LR 6 upgrade (now have LR 5.7).  Received download email instructions.  LR 6 downloaded.  When I run the file downloaded, rec'd msg of error than LR 6 can only be installed on the 64-bit computer.  I have Win 7 Pro 32-bit.  How can I fix it?

  upgrade your computer (minimum requirements for Photoshop Lightroom for Mac OS and Windows) or return of your purchase, http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

• Re: Tecra R950-18F: win 8 Pro starts a new SSD drive

  Hello

  Having a few issues with the victory 8 DVD pro included with my laptop.

  BIOS is set as UEFI + secure boot, win 8 pro dvd starts and I can start recovery, after a while, he asks disc 2 and starts to recover win 8.

  After completion and reboot, it does not start and shows just the toshiba logo.

  Factory hdd with SSD OCZ VERTEX 4 is replaced by the bios.

  What could be the problem?

  > Drive HARD factory is replaced with SSD OCZ VERTEX 4 recognized by the Bios.

  You have the same start-up problems 8 win using the original HDD equipped Tecra R950?

  From my point of view, it would be possible that this laptop does not start successfully because of the new SSD.

  I recommend you check the previous HARD disk.
  If the laptop could start correctly, the problem is related to the new SSD drive.

  In some cases, it would be possible that the SSD firmware must be updated.

• MB is compatible with Win XP Pro 64?

  IM seen taking an older tower PC that I built a while back and convert it to a multiboot that includes Win XP Pro 64 ed. Have the drive and everything, but I have no idea if the MB is the exclusive 64-bit or 32-bit compatibility. I already know that I have to upgrade the processor. Oh and the motherboard is an Asus P4P800 deluxe.

  How to know if your motherboard is 64-bit DRS3000C e.

  http://www.ehow.com/how_6778109_tell-can-run-64_bit-processor.html

  CPUID.

  http://www.CPUID.com/softwares/CPU-z.html

  Good luck.