Comments can ping host, but host cannot ping the prompt.

Similar Questions

• Can ping the router and the computers to the network, but not beyond router

  I have 2 computers in linux and 3 Windows XP computers.  All can ping the router and inside my network.  Anyone can browse the internet.  None can ping outside my network (google.com or its IP address) if connected directly via the switch or router.  Traceroute shows stopping at the router.  Router firewall is disabled.  Ping on the router tool not working anymore. Linksys WRT54G Router is and I've just updated to firmware 4.21.1 but the old firmware is has never worked. I use 192.168.1.1 for the router.  Linux has some IP fixed all the other usind DHCP.  ISP is a provider of mobile phone to the modem.  Just like cable or DSL, I guess.  I've looked everywhere with no solutions.  Anyone have any ideas?

  Yes, contact your ISP to get it resolved.

• internal hosts cannot access the internet w / L2L configured tunnel

  The internal hosts behind the ASA cannot access the internet with a configured tunnel to L2L. The L2L tunnel is mounted and passing traffic correctly. However, the internal host cannot access the internet through the ASA. I think I have my NAT watered somewhere. I can't even a host statically mapped to the internet. It might be because I'm used to having a WAN IP to the external interface which differs by the CIDR block assigned by the ISP. In this case, it's all together, with the ASA outside interface occupying the first available address.

  We have been assigned a CIDR range x.x.x.64/28. x.x.x.65 is my front door and my first usable est.68, by the PSI (I guess what they utilisent.66 et.67 for internal use). External interface of the ASA est.68 and I'm trying to get NAT others. I'm Polo all DHCP clients internal and have some static entries as well. Below is the relevant NAT config. Yet once, all traffic passes above the tunnel properly, but not from inside to outside. If more information is needed, please advise.

  interface outside

  IP address x.x.x.68 255.255.255.240

  NAT-control

  Global x.x.x.69 - x.x.x.77 2 (outdoor)

  Global 1 x.x.x.78 (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 10.10.10.0 255.255.255.0

  public static x.x.x.69 (inside, outside) STATIC_NAT_EXAMPLE netmask 255.255.255.255

  internal access-group interface inside

  Route outside 0.0.0.0 0.0.0.0 x.x.x.65 1

  internal to the 10.10.10.0 ip access list allow 255.255.255.0 any

  ! Remote LAN is 192.168.10.0/24

  access-list sheep extended ip 10.10.10.0 allow 255.255.255.0 192.168.10.0 255.255.255.0

  Can you post a "show sysopt run?

  Try this command to enable proxy arp.

  No outside sysopt noproxyarp

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried to download the creative cloud and it didn't download correctly (after a long time) and now I can't uninstall it. It takes place on my computer but I cannot uninstall the Adobe application. Help please!

  I tried to download the creative cloud and it didn't download correctly (after a long time) and now I can't uninstall it. It takes place on my computer but I cannot uninstall the Adobe application. Help please!

  Hi Julie,.

  Please see the below help document to uninstall the application:

  Using creative cloud | Download, install, update or uninstall applications

  Otherwise, you can use the CC cleaning tool as well.

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Kind regards

  Sheena

• Asked that question this morning but now cannot locate the issue. Where should I start looking?

  Original title: my question

  I asked a question this morning but now cannot locate the issue.  Where should I start looking?

  Thank you

  Kate

  According to your profile:
  http://answers.Microsoft.com/en-us/profile/09e3ff13-0096-4DA0-89fd-5ce723c7181e

  You asked a question ~ 6 minutes after you registered to use the forums.

  Message: ' Catalyst Control Center: the application host - the host application has stopped working. "
  [This is a link to the question...  Click on it].

  Essentially, it seems that in your message subject and body in this issue, you must download and install the latest version of the device for your AMD AMD video card driver.  It is an AMD problem, not a problem with Microsoft.

  However, since you have not given the brand & model of your computer or video card / the device in question - the best you can do is point you to where AMD is an application that allows you to scan and find the latest device driver and catalyst for your video card device software.

  http://support.AMD.com/en-us/download/auto-detect-tool

  Good luck!

  More information in the actual conversation:
  Message: ' Catalyst Control Center: the application host - the host application has stopped working. "

• I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of

  I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of image). Adobe staff question: can I expect to find this option in a future release?

  Hi Pcaubi,

  There is no such updates for the same from now.

  I suggest you to please put in a feature request to: Photoshop community customer family

  Kind regards

  Tanuj

• Hello! We have formalized an annual subscription CC adobe, but show adobe that long three days, payment has passed, but we cannot receive the online chat, document does not. What is a problem?

  Hello! We have formalized an annual subscription CC adobe, but show adobe that long three days, payment has passed, but we cannot receive the online chat, document does not. What is a problem?

  Hello

  We do not have any active subscription under your account.

  Please share the following details in a private message so that we can help you properly.

  Order no:

  e-mail address:

  Thank you

  Varun

• Hi there, I need to be able to read the raw files on an Olympus Stylus 1 via CS5 and Lightroom 4.  I downloaded Raw plugin v 6.7.1 file but still cannot read the files.

  Hi there, I need to be able to read the raw files on an Olympus Stylus 1 via CS5 and Lightroom 4.  I downloaded Raw plugin v 6.7.1 file but still cannot read the files?

  Read this http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html table

  The Olympus Stylus 1 was first supported Camera 8.3 crude which is compatible with the CS6 and CC.

  It is not compatible with CS5 or more and never will be.

  If you do not upgrade to CS6 or CC, then you can dwonload the free Adobe DNG converter, convert all Stylus 1 Raw files to DNG, and then edit the DNG in CS5.

  Camera raw, DNG | Adobe Photoshop CC

• Since I have been to connect on Facebook, but it cannot open the Facebook home page.

  Dear Sir or Madam:

  Given that I was connect on Facebook, but it cannot open the Facebook home page, home page is empty, and he showed a massage on th botum of screen says "done, but with errors on page", I need help to teach me how to fix it. I am using Windows XP SP3, IE 8.

  Thanks for your time and your attention. I Muta hear you as soon as possible.

  Best regards

  Henry

  Henry, have you tried clearing your browser cache and cookies? Also, try a different browser (Tip: Chrome).

• Host Windows 7: Win XP Pro SP 3 comments: comments can ping hosts Internet but IE

  Problem: The customer is impossible to browse Internet hosts.  This virtual machine works great under Vista with the same version of VMWorkstation.

  Attempts to debug: take mail.yahoo.com.  I can ping.  But accessing http://mail.yahoo.com/ fails according to the and he tries so a search MSN and of course breaks down, too.

  C:\Documents and Settings\Administrateur & gt; ipconfig/all

  Windows IP configuration

  Name of the host...: squidney-cafdd0

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: localdomain

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : localdomain

  ... Description: VMware accelerated AMD PCNet Adapter

  Physical address.... : 00-0C-29-E8-C0-C8

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  ... The IP address: 192.168.203.129

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.203.2.

  DHCP server...: 192.168.203.254

  DNS servers...: 192.168.203.2.

  Primary WINS server...: 192.168.203.2

  Lease obtained...: Sunday, June 21, 2009 20:02:54

  End of the lease...: Sunday, June 21, 2009 20:32:54

  C:\Documents and Settings\Administrateur & gt;

  Host: Windows 7 RC - Version 6.1.7100

  Client: Windows XP Pro SP 3 - Version 5.1.2600

  VMWorkstation version: 6.5 build - 156735

  Guest network: NAT

  Driver comments: VMware Accelerated AMD PCNet Adapter

  VMX file is attached

  vmsupport file is attached.

  Try to change your guest of NAT network to bridged.

• Main server cannot ping the server 2 to another location, but the 2nd Server can ping the backend

  I have 3 servers: server and 2 servers to files in another country.

  My main server can only ping the 2nd file server.

  But both of our servers in 2 files from another country can ping on the principal server.

  In short, I can not away to the first file server.

  The settings on both servers of files are the same. And I don't have access to the 2nd file server issues using the main server.

  If someone has the patience to help me understand the question?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows Script Host - cannot find the file script 'C\Users\Shootea\AppData\Local\Microsoft\CDBurning\desktop.ini '.

  My laptop is upward lately since January 3, 2015 and a startup displays message - Windows Script Host cannot find script 'C:\Users\Shootea\AppData\Local\Microsoft\CDBurning\desktop.ini' file - I google a couple of information how do I get rid of it. I tried to open msconfig and then disabled under Startup in the Configuration of the system. 'Normal Start Up' is selected in the general tab slot. After I turn it off and restart my laptop the same pop-up message shows no more, but whenever I surf the net or you open an app, my phone now shuts down randomly. Is there something I did which could spoil? I appreciate any useful information to resolve this problem. Thanks a lot :) :) :)

  Hello

  As to what you were doing in msconfig to spoil anything, we don't know what you have disabled in msconfig.

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  See you soon.

• I get all the time can not download anything 'Windows cannot access the specified device, path or file. You can't have the permissions to access the have__appropriate element. »

  Original title: problems cannot do anything

  Windows cannot access the specified device, path or file. You can't have__appropriate the permissions to access the item. I get it all the time can not download anything

  Hi birdylod,

  ·         What version of the operating system is installed on the computer?

  ·         You did changes to the computer before the show?

  ·         You use Internet Explorer? If so, what version are you using?

  ·         What files you download?

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  For reference:

  What to know before applying permissions to a file or folder

• Can't see 2nd computer cannot join the group home

  I'm putting in place the home between my PC & my laptop group. I do work very well when my laptop is connected to my router, but when I go nothing wireless.

  The OP gave me full access to its machines and I have deleted/recreated homegroup, but neither machine was able to detect, no matter to what end I started. Networking has worked and homegroup troubleshooting went to the test but could not solve the problem. Given that the OP has a good knowledge of creation and access to shares, he now uses this mechanism.