Hosted network problem in Windows 8 Pro

Similar Questions

• Network connection between Windows 7 Pro and Windows XP Pro wireless

  Nice day.

  I am trying to connect to a Windows XP pro to a home wireless network, hosted by a pc Windows 7 Pro. I can see all the other PCs on the XP pc but cannot get them to connect. When I click the icon for the Windows 7 pc and try to log in (open) he asks a user name and password but I don't know what is the user name. I guess the password is generated by the computer windows 7, when I set up the homegroup. Would you please advise me on what to do to make this work. Thank you.

  Hi ArnBas,

  Looks like you are facing a problem with network computers. I came to find this documentation for you who speaks the networking of the various versions of the computers.

  Just through the same thing and check if everything is fine with the settings. Also, take a look at this very useful information.

  I hope this helps!

• Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.

  Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.  So I tried a full install without success.  Can you please give some tips to overcome this problem?  I lost the back upward with the resettlement, don't know how, but I have a QuadCore intel 9650 memory of 8 GB, 560 GTX GPU, 120 GB SSD.  Can I install windows 7 ultimate, but I prefer Windows 8 Pro and don't want to pay for it again.

  I suggest you reinstall Windows 7 first, then use your existing Windows 8 Pro key and reinstall Windows 8 Pro from the following link:

  You can download it from there and use your product key to upgrade:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  You will need to reactivate by phone:

  Activation of the phone:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Problems with Windows XP Pro to Windows Vista computer networking

  I'm totally frustrated. I got a home network that worked with a PC running Windows XP Home and a laptop running Vista Basic. Then, I added a PC running XP Pro and it has added to the network. He works for a while and I was able to share files and printers. Then all of a sudden I can't access Windows XP Pro PC to Vista Basic laptop and get the following message:

  "\\PC1\My documents is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  Not enough server storage is available to process this command. »

  I tried the solutions for the "memory insufficient servier" problem but none of them are working and none of them address the element of authorization. Vista Basic laptop can still access the XP computer at home and the XP Pro computer can access the Vista Basic laptop but the laptop Vista Basic responds with the above message whenever I try to open the files on the XP Pro computer.

  I tried to reconfigure the network from the Vista Basic laptop, but every time I have save the setup.exe on a flash drive network and then try to run is one of the PC Windows XP he says the information is not readable, and I need to rerun the Configuration Wizard from the network on the original computer. When I try to reverse the process by running the Configuration Wizard from the network on XP computers then the Vista laptop, he fails and suggested that I have configure the network manually. I'm sick of this. Can anyone help.

  So I have not tested, but I saw where he works for others.

  METHOD 1: Via local security policy:
  NOTE: This function is for Vista business, integral and Enterprise versions
  only. For Vista Home Basic edition Home Premium, see METHOD 2 below.

  1 open administrative tools.
  NOTE: In the Start Menu or the control panel (Classic view).
  2. click on local security policy.
  3. in the left pane, click the triangle next to local policy.
  4. in the left pane, click Security Options.
  5. in the right-down pane, click Network Security: LAN manager
  authentication level.
  6. click on the menu drop-down and click Send LM & NTLM - use NTLMv2 session
  security if negotiated.
  7. click on OK.
  8 restart the computer.

  METHOD 2: Registry Hack:
  NOTE: This is for Vista Home versions.

  1. open the Start Menu.
  2. in the area of the white line (search), type regedit and press ENTER.
  3. click on continue for UAC prompt.
  4. in regedit, go to :-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Lsa
  5. in the right pane, right-click on LmCompatibilityLevel and click on modify.
  NOTE: If it does not already exist, create a DWORD value named
  LmCompatibilityLevel
  6. set the value to 1
  7 reboot

  MCP. MCDST. LVL 80

• Problems with Windows 7 Pro Remote Access

  I'm on a Windows 7 Pro machine, but it is connected to a working network.

  I'm trying to access Windows 7 Pro machine to my parents at home.

  I went through These Instructions.  We have created a password for one of the user accounts.  I checked the name of the computer (there is no listed area).  We confirmed that remote access has been enabled and allow remote access has been verified in the firewall settings.

  However, when I start "Remote Desktop connection" on my computer and put their computer name in the box, I get a message that it cannot find the computer.  Then, the message indicates that the computer cannot belong to "the network specified."  But there is no specified network, and I see no where to do it.

  In addition, it is possible that my work security settings prevent me from remote accessing another computer?

  Last question: if I used the Fusion of the virtual machine on my Mac, with Windows 7, I can remote access to another computer?

  Real technique.  The problem boils down to the IP address.  Your computer probably has an IP of 192.168.1.8 or something like that.  But the router any fact domestic in the world.  So when you want to connect to the remote computer, you must use the IP public face (which the internet service provider home assigns to your router/home, not that of your router assigns to your computer).  But then, you're always short because now you have at home, but you have to tell the House what PC actually send this letter too.  It's like an envelope with an address half. Port forwarding it tells the final step which PC should receive the message.

  But yes I agree they could at least put a link or an explanation.

• Network problem between Windows 7 laptop with the Windows XP desktop computer via Linksys WRT54 router.

  Original title: network problem!

  How can I get my laptop with Windows 7 Home Edition to connect to my desktop with Windows XP on it. I have a router Linksys WRT54 plugged directly to the desktop via ethernet and my laptop has an excellent signal but I can't access programs or the printer with it. I know the 'host group' on 7 but XP isn't that. Are there alternative than to put 7 on my desktop? Any suggestions?

  Thank you!

  Hello

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  According the description of the problem face you connection problems in Windows 7 laptop with the Windows XP desktop computer via Linksys WRT54 router.

  Residential group option is available on Windows 7 and Windows 8 operating systems. However, you can see the following article for more information on the connection of Windows 7 and Windows XP computers:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• hosted network problem

  Mr President.

  I use windows 8 at acer 4736, I use to set a hostednetwork using connectify for somedays, but I use it not so now I'm trying. to connect, but the State of the hosted network was not allowed and virtual pilot shows material not connected and adapter setting I have not find wifi at all the Please help me solve this problem
   

  Hello

  This article may interest you:
  http://www.thewindowsclub.com/the-hosted-network-couldn ' t be started
  Hope this helps, good luck :)

• Problem activating Windows XP Pro on a Dell Dimension 4600, which originally had XP Home

  I have some difficulty to activate MY PERSONALLY PURCHASED VERSION of Windows XP Pro on a Dell Dimension 4600 workstation that initially provided with XP Home.  I have TWO Codes of 25 character key true = 1 The printed on the sticker on the computer AND the one supplied with the disk I bought for my laptop that was stolen last week.  I entered two key during the windows process codes activate and they the system tells me invalid or incorrect product key code.  I WAS talking with a Microsoft Tech Rep on the phone trying to solve this problem and has been disconnected when put on "Hold" and now cannot get through to a real person again.  CAN SOMEONE ' ONE/SOMEONE' HELP ME PLEASE?

  Hello

  Both your XP, the laptop and the Dell operating systems will have been oem licenses. OEM licenses are tied to the computer that they were originally installed on. In regards to the Pro license you can see in your report where is says Windows license Type: OEM System Builder.

  The only XP version that can be legally charged to your Dimension is one that has been provided with it by Dell, i.e. the XP Home license.

  activation of character for home 25 codes do not work with the Pro, the reverse is also true.

  Tricky

• Network disappears from Windows 7 Pro Computer__ - when the computer is idle for a while, the other networked computers disappear

  We have a network with 10 other computers Windows XP Pro Windows 7 Pro computer.  When the computer of windows 7 is inactive for a period of time the other networked computers disappear.  The Windows 7 computer must be restarted in order to access the network.  How can I keep the network disappear on the Windows 7 computer.

  Hi Marcus MMD,

  (1) if it works well before?

  (2) remember to make changes?

  (3) how you have connected computers on the network?

  (4) you are working on a domain network?

  You can see the steps presented by Kevin, post dated Monday, April 13, 2009 12:28 in the link below that relates to a similar question

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/dc8abee1-68b4-4606-a3b0-0a167129388a

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 2013 Outlook send/receive problems with Windows 7 Pro

  Hello

  I have been using Outlook 2000 with Windows XP Mode in Windows 7 Pro.

  I just bought Office 2013 Plus and I'm trying to set up my email accounts, using the same settings as my Outlook 2000 and use the same Outlook 2000 .pst file.

  The 2013 Outlook is installed in my side Win 7, not in XP Mode.

  I tried to uninstall/install my accounts e-mail several times and always get the following errors:

  Sending - 0X8004210B

  Home - 0 x 80040154

  I'll put my email as POP3 accounts

  Does anyone know what would be the problems? I went through a lot of discussion and many users have the same problems as mine. However, I tried several solutions suggested and none of them work.

  Suggestions or comments are much appreciated.

  Thank you.

  OK, I got it fixed.

  I did a REPAIR of Office 2013 and then did a restart. When I started Outlook, accepting them and sending work properly without any problem.

  I don't know why didn't think about it at first.

  I guess that sort of Office Outlook and Office was damaged and needed to be repaired. But it's a brand new facility (two days ago). I guess that things can happen even with a new facility.

  Thank you, Ken, for your kind replies.

• ISO image installation problems under Windows 8 Pro

  Whenever I try to mount the ISO with the integrated installation of Windows 8 Pro it returns "could not mount file" 'Sorry there was a problem, the cut file' or 'the disk image file is corrupted.

  In some cases, the file gets however mounted, but to find out, I have to watch computer containing all the readers.

  In each case, whenever I drop an ISO that contains audio from SACD or other media, danslechamp of J River Media Center 'Play now', it shows every single track file picture disc and plays well. So he does, even when burned on a DVD + R, then, obviously, the ISOs are healthy and should the problem with Windows...

  I'd be happy to hear from you on this subject.

  The file must be renamed to .exe on the Microsoft site.  This is an executable, not an ISO standard

  (Visio 2013 64 bit in English)

  OK guys, I FOUND THE SOLUTION by chance.

  Here's how to solve the problem (at least it worked immediately when I did it, then try it!)

  Right click on the image in question file (.) IMG. ISO, etc...) and choose a default program to open with. WIndows MUST ABSOLUTELY BE the DEFAULT program to open the image files. There is a bug not declared on the Explorer of Windows 8 is not not the default value, which is not to open an image file valid, not corrupted.  YOU MUST set the default Windows Explorer to mount as a virtual DVD drive image files in WIndows 8.

  That's all and I hope it works for you. Thank you! and if it works, please mark this as useful to show your appreciation, because there is no button of congratulations or thanks. : D

  Here what I was doing, eject the SD card (you don't have to get out of the computer).  Try to mount again.  I did it and it worked perfectly.

• Canon LBP2900 problem with Windows 8 Pro

  I use Windows 8 Pro. I use the Canon LBP2900 printer but it works for a few days and after a few days of its work stoppages. When I click on the printers option it hangs. When I restore my PC to day before he starts new job. It could be due to an upgrade of what happens in the automatic updates. Second, new material that I use after Windows 7 is Microsoft Wireless 5000 mouse. Pls guide solution.

  Found new drivers for canon LBP 2900 for 8 32-bit/64-bit windows. Last updated on 15 February. Hope this will solve the problem. See the links below:

  8 32-bit Windows:
  http://support-in.Canon-Asia.com/contents/in/en/0900785701.html

  8 64-bit Windows:
  http://support-my.Canon-Asia.com/contents/my/en/0100278201.html

• Audio problem in Windows 8 Pro 64 - bit...?

  ---

  Sometimes (about 50% of the time), sounds don't work at all, either when using headphones or built-in speakers...

  ---

  When this problem started:

  This problem started on July 10 after a few automatic updates have been installed. According to the history of my update, this is:

  (1) update for Windows 8 for x 64 systems (KB2960837)
  (2) removal tool malware from Windows to Windows 8, 8.1 and Windows Server 2012, 2012 x 64 edition R2 - July 2014 (KB890830)

  ---

  How to solve this problem:

  Right click on "computer".

  Go to 'manage '.

  Go to "Services".

  Right click on "Windows Audio" and "restart".

  Then I restart the laptop and the sound is working again...

  ---

  After the above, I did this:

  Went to "playback devices".

  Went to 'Properties' and then 'Advanced' tab

  Unchecked "allow applications to take exclusive control of this device."

  ---

  But still, half the time I start up my system, the problem is recurring and I have to redo the steps above to make it work again... When I go to "Playback devices" and right click on the speaker and select 'Test', I get the following warning message:

  "The device is used by another application.

  "Please close all units are audio playback on this device, and then try again.

  ---

  But according to the Task Manager, there is no other application running which I think could do this... I got a Virus/Malware and did a full system scan and analysis in time start but there is nothing... While I can solve this problem by following the steps above and by restarting Windows Audio, I want a permanent problem solution please... I don't want to have to keep rebooting my audio system to rework...

  ---

  Features of the laptop:

  i5 - 3210M

  6 GB DDR3 1600 MHz RAM

  Intel HD 4000 @ 650-1100 MHz

  Windows 8 Pro 64-bit

  Quick Heal antivirus Pro

  ---

  Update KB2962407 the origin of the problem. I fixed mine to uninstall this particular update. Details can be found here:

  http://www.eightforums.com/sound-audio/49684-no-sound-device-being-used-another-application-7.html

• 8.1 Windows Pro update the problem (from Windows 8 Pro) on Envy 23 TouchSmart all-in-One...

  Hello

  I have a HP Envy 23 Touchsmart all-in-one that I bought a year ago (12/2012). It comes preinstalled with Windows 8.

  System information:

  (a) Intel (r) Core i7 - 3770 S CPU @ 3.10 GHz

  (b) 8192 MB of RAM

  A few weeks after that I had bought the system, I've upgraded to Windows 8 Pro with Media Center that I bought through Microsoft upgrade program.

  Last week (19/10/2013), I saw the option upgrade to Windows 8. 1 in the store and decided to upgrade.

  After a few minutes, I got a prompt asking me to restart the computer, and I did.

  However, I noticed that the screen has turned white, but it restarts not really - I have seen that the hard drive light was still flashing and I waited for about 15 minutes. I know it does not restart because if that were the case I would have seen the HP logo on the screen of the BIOS. A little later, the system entered into mode 'sleep' (at least the light blinked slowly as if it was the sleep). As it was late at night, I decided to leave the system alone and decided to check on it the next morning. The next morning, he was still in mode 'sleep' (as I feared) - when I tried to wake up from her sleep by moving the mouse/hit the return key, he did the exact sounds as if he were to wake up from its sleep (as it always does), but the screen is still blank. The light power button lit up constantly indicating he's awake now.

  At this point, I decided to turn off the system by holding the button for a few seconds. To restart, I saw the HP logo on the BIOS boot screen and the screen went white and nothing came.

  So I decided do a system recovery using my Windows 8 recovery CD and turn off the system with the CD in its niche. This time, the system came and began immediately to restore my OS to a previous version.

  After connecting to the system recovered, I received the following message:

  "Could not update for Windows 8.1.

  Sorry, we could not complete the update Windows 8.1. We have restored the previous version of Windows on this computer.

  0xC1900101 - 0 x 40019.

  I tried to reinstall Windows 8.1 a couple of times after that. Once to disable all non-Microsoft services and disabling all startup programs. Always the same result.

  I have no antivirus software on my other system protection of Microsoft default system software.

  Any help, greatly appreciated.

  Thank you.

  I have disabled active secure boot existing starter and the update worked.  Now we get the error of watermark "secure boot not configured correctly.  But I have re-enabled secure boot and the error disappeared.

• Problems with windows 7 pro download oem link

  Hello?

  I have a dell latitude laptop and oem striker and I've lost my windows 7 pro recovery dvd, I'm lost and I can't find a legal iso copy, even in the dell website

  can you help me please

  Your best option is to ask Dell recovery media:

  Reference Dell
  http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form?c=us&l=en&s=Gen
  1-800-624-9896

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.
  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.
  Given that this option is no longer available, what are your options? See the article for more details:
  How to: What are my options for Windows 7 reinstall media?
  Make sure you scroll down and read the section:
  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?