Hosts in vCenter then unplug it after about 2 minutes

I have an environment vCenter 4.1 with 6 all current hosts to run ESXi 4.1 and everything is good.  I bought additional licenses (6 existing are Enterprise Plus and I bought 2 Enterprise license) and I try to add 2 additional guests.  One of the new servers is an existing server running ESXi 4.0 and other new server is a new server and I installed U1 4.1 on it.  Both servers are HP DL360s, existing is a G6 and the new is a G7.

I first tried to add the new server.  I connects well, installs the agent and looks good for about 2 minutes and headed towards does not.  I can click on Connect and it connects upward for another 2 minutes and then goes back to does not.

I looked at the newspapers but saw nothing obvious but which does not say much - I'm not well versed in looking at the newspapers and I can't be looking good.  To decide on what to look for would be appreciated.  Then I upgrade vCenter 4.1 U1 and get the same results.  Next thing I tried was to add the existing (running ESXi 4.0) server, and it includes the same way.

These 2 servers, I am trying to add are in another network than my other servers ESXi 6 but in the same physical location.  The vCenter box is in the same network as my 6 hosts operation.  I had my network guy open everythng between 2 servers ESXi, what I'm trying to add the vCenter box and still the same result, even if I still suspect a network problem.  I know connectivity is there because I can add the host and two ways to ping.

Here is a run down of what's different on 2 new guests who I am trying to add: in the network segment are different as vCenter, integrated ESXi (6 others have local hard drives,) and the licenses are at different levels (although I can't imagine has nothing to do with it).

Any ideas or help would be most appreciated.

Of the Installation Guide:

902 the default port used by the vCenter Server system to send data to managed hosts. Managed hosts
also send a regular heartbeat on port UDP 902 the vCenter Server system. This port should not be
blocked by the firewall between the server and the hosts or guests.

If this port is not open on UDP, you see the exact thing you encounter. Who give a shot.

Tags: VMware

Similar Questions

  • The short films that I do in Windows Movie Maker fail to run after about 1 minute, regardless of the format, I save in (WMV or AVI) any ideas why or what I am doing wrong?

    The short films that I do in Windows Movie Maker fail to run after about 1 minute, regardless of the format, I save in (WMV or AVI) any ideas why or what I am doing wrong?

    I'm just looking to add the opening titles to the pieces of film of aprox 3 Germans, but everytime I try and save files for uploading to Youtube, then fail shortly after a minute. The sound and picture freeze while the counter continues until the end of the file.

    am driven crazy by this so any advice would be welcome...

    Hello

    My friend John Papa - MVP - is the expert on Windows Movie Maker.

    PapaJohn.org
    http://Papajohn.org/

    PapaJohn - online tutorials
    http://www.Papajohn.org/mm2-online-tutorials.html

    Windows Movie Maker Tutorials - see the menu on the left and others on the main screen.
    http://www.windowsmoviemakers.NET/tutorials/

    Windows Live Movie Maker Forums are good sources of information:

    Windows Live Movie Maker that works on Vista and Windows 7, see the link under Windows Live Essentials.
    http://windowslivehelp.com/

    Windows Live - Movie Maker Portal - official support Site - see also the Forums of the right part of the page
    http://windowslivehelp.com/product.aspx?ProductID=5

    ====================

    These might help:

    Getting started with Windows Movie Maker

    Import video, photos and audio on Windows Movie Maker

    Import video from a videotape

    Get a movie in Windows Movie Maker

    Make a movie quickly in Windows Movie Maker (AutoMovie)

    Publish a movie in Windows Movie Maker

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • MapleStory disconnects after about 2 minutes in Windows 8, no problems with Windows 7

    I just got a new laptop with Windows 8 on it. The specs are well above what is needed for the game, which shouldn't be a problem. I am able to boot and log in the game, but after about two minutes, it disconnects, gives me an error message saying: "unable to connect to the game server. Please try again later. "The window closes so saying me that I was disconnected. The game works perfectly fine on my old laptop, which is running Windows 7 and has worse characteristics.

    I tried to run in compatibility mode, but get a different error after blackcipher loads, but before loading the game, saying: "the instruction at 0 x 00649243 referenced memory at 0 x 05055215. The memory could not be written. Click on OK to terminate the program. »
    I've looked everywhere and can't seem to find solutions.
    If it helps, my computer is a dv7 HP Envy with an Intel i5, 8 GB of RAM and a 2 GB nvidia geforce GT graphics card.
    If anyone knows a solution to make it work, it would be most appreciated. It seems that a few other people have the same problems, but others with Windows 8 have no problem, so I hope that maybe it's just a setting I need to change.

    Hi Sannesteenhuis,

    Welcome to the Microsoft community.

    Please answer these questions to better understand the issue.

    1. Have you tried the steps by Pinaki displayed? If Yes, then what is the result?
    2. Have you tried measures to solve this problem?

    I suggest refer you to the following procedure to copy the Event Viewer logs.

    To view the events in the Event Viewer Application log:
    1. press the key Windows + X key and then click on Control Panel.
    2. double-click Administrative Tools, and then double-click Event Viewer.

    NOTE: Alternatively, you can start Event Viewer by starting the Microsoft Management Console (MMC) program that contains the snap observer of events.
    3. Click to expand Event Viewer (if it is not already expanded).
    4. click on Application.

    The events that are logged in the application log are displayed in the right pane.
    5. to view more details about a specific event, double-click the event that you want to display.
    6. to copy the details of the event, click the copy button, open a new document using the program in which you want to paste the event (for example, Microsoft Word) and then click on paste on the Edit menu.

    Also suggest you try to install the game in compatibility mode and check if it helps.

    Make the programs more compatible with this version of Windows

    http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

    Hope that the information provided was useful. If you need other assistance do not hesitate to post. We will be happy to help.

  • Why my new PSE12 crash after about 1 minute?

    I used PSE8 for several years successfully on a desktop computer running Windows XP. Always reliable, if a little slow backup etc with my huge catalog (75K image).

    My new office works now Win7 64 bit. It is a high-performance machine. I bought PSE12 and converted my old PSE8 catalog. For a while, PSE12 worked OK, although it took a few days to generate all the thumbnails for my large catalog.

    Suddenly, it began to break up after about 1 minute - even if I do nothing. I uninstalled the old PSE8 - still the same problem. I uninstalled / reinstalled PSE12 - still the same.

    Feeling a little desperate because I dare not my backup catalog, or even add new images, the software will inevitably crash half way through. And I'm going on vacation soon, with the camera!

    Any ideas?

    Hello

    You said that it used to work OK so I think that the material should not be the problem.

    Is the user you connect on your PC an administrator?

    Try another test to see if it's the catalog or not.

    Start the Organizer while holding the SHIFT key before you enter the Catalog Manager.

    Click the new button (top-right) and enter a new name (TestCat or something) and click on the OK button.

    This should create a new, empty catalog. You can see if that says for more than a minute. You could try to import some images, but I suggest that you do not have something with them.

    Current rest of performance then we know it is the catalogue - otherwise, if the application.

    Brian

  • After about 10 minutes connected my connection drops and I have to keep resetting my hub [BT Hub]

    After about 10 minutes connected my connection drops and has you keep resetting my hub [BT Hub]

    Hello

    What operating system is installed on the computer?

    Method 1: I suggest that you follow the instructions from the link and check if that helps:

    http://BT.custhelp.com/app/answers/detail/A_ID/7609/~/my-broadband-connection-keeps-dropping

    Method 2: Follow the steps in the link and check if it makes a difference:

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • my computer screen stops working after about 30 minutes. Computer is not affected. What is the possible problem?

    Monitor turns off after about 30 minutes. Green light stays on. Computer keep going tom exploit.

    Must turn off monitor for several minutes before you post again. What is the possible problem?

    Maybe this article would provide a few ideas:

    Adjust Windows XP Power Options
    http://www.lancelhoff.com/adjust-Windows-XP-power-options/

  • I have a TouchSmart 300-1007 that performs a hard block after about 30 minutes to be turned.

    I have a TouchSmart 300-1007 that performs a hard block after about 30 minutes to be turned.

    Windows 7 Home Edition, the stock machine, even if it does even if I start in diagnostics (F9 at the start of the BIOS), so I doubt it has nothing to do with the operating system.

    By "hard block", I mean the screen goes black, the wireless keyboard is not flashing blue light on the USB FOB and the power button only turns off although it by hand for 30 seconds. I have to pull the power cord to turn it off.

    It started shortly after the application of the 5.12 version 2A8E update motherboard BIOS published 2011-03-24. Never should have done that; experience shows that I have more problems than improving when updatng BIOS' are.

    No heat problem (air vents are clean as a whistle). I suppose the best thing would be to restore the BIOS but I don't know if it is possible, or how to do it.

    This is my daily workstation and is now effectively a boat anchor / deadline / brick.

    Any ideas?

    Yay for me. My dose of GENIUS has had this problem for THREE DAYS running machine now without any problem whatsoever.

    It it CERTAINLY evil genius of this machine, no doubt.

    Other victims of the Touchsmart series should regroup and get some kind of compensation. I know that I had to buy a new computer to replace this one when it stopped working, and I spent a TON of time to solve the problem (it would be an easy solution to the factory; not so easy at home)

  • My computer acer laptop keeps closing after about 5 minutes in standby mode. Is it possible to fix this?

    My computer acer laptop keeps closing after about 5 minutes in standby mode.  Is it possible to fix this.

    Original title: power shutdpwn

    Hello

    Have you checked your power options?

    http://www.thewindowsclub.com/configure-power-plan-Windows-8

  • My windows chassis disappers after about a minute by all adobe products.

    I have CS3 and adobe XI player and my disappers of chassis of windows after about a minute. In my opion this problem starts by upgrading to adobe reader XI. Even if deinstalltion drive and all the problem adobe products persists. So please can someone help me?adobe without windows frame.png

    I wonder if you have Kapersky Antivirus?

  • RTMP HLS-live resignations after about 30 minutes, keeps going

    I'm streaming to 4.5 FMS using OUT 3.2. I am successfully the HLS and RTMP streaming and deliver with a JWPlayer. After about 30 minutes, HLS does not work anymore and if I reload the Web page on my iPad, I just get the 30 second buffer. But continues to go to RTMP Flash streaming. If the encoder is file and the handshake between the encoder and the server did not break.

    I created my server according to Lisa Larson-Kelley to Lynda.com tutorials, so I can't understand what I missed. What could cause CTS to stop delivery after a successful login?

    Thank you

    Raul

    You use the developer on FMS license? If Yes, which is the cause... the developer license has limits on the HTTP streaming

  • ESXi/ESX host disconnects vcenter Server 60 seconds after the connection

    Hello guys,.

    I recently made some changes to my VMware Lab.

    I'm under vCenter 5.1 with several hosts of ESXi 5.1.  My vCenter ran on one server ESXi 5.1 until I recently migrated there in a window of Windows 8 running VMware Workstation 9.   The vCenter is running normally and I am able to add hosts in stock, but they disconnect after approximately 60 to 90 seconds.  I believe that this issue is that the heart beats that are sent by the host do not reach the vCenter (port 902), I think that it is similar to the issue discussed in the following KB:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1029919

    Here are my questions:

    1. the article describes download wireshark and run scripts.  Is there an easier away from do?  I'm literally just checking this single port of the ESXi host, there is no equivalent for telnet from an ESXi host?

    2 VMware Workstation 9 block ports or run its own firewall any?  Since this vCenter worked perfectly when running on the host ESXi 5.1 we know this isn't a firewall on the virtual computer problem, I have also checked the Windows 8 machine running VMware workstation and have verified that the windows firewall is disabled.  Windows firewall is not the issue. 

    Thank you

    Duncan.

    Just a quick question. A fact change of IP address of the server vCenter with migration of VMware Workstation? Maybe http://kb.vmware.com/kb/1008030 is related to the question!

    André

  • VCenter Server disconnects guests after 1-2 minutes

    Had a strange little problem going on because all my 4 ESXi (not upgraded to U1 yet) switching hosts offshore to put on a new UPS system - if I connect it with VI client to our server Vcenter (Win 2003, VCenter 4) not yet upgraded to U1 consistantly unplug all 3 hosts at the same time after 1-2 minutes.

    Network connectivity is very good between the VCenter server and hosts, if I connect directly to one of the hosts he will stay connected properly.

    Impossible to find errors in case the viewer connects

    Ideas - I have a ticket open with Vmware support, but am struggling to get an answer at the moment.

    Thank you very much

    Well follow these steps:

    1. check vCenter manage IP

    How?

    KB here

    KB here

    and that's how the user has managed to solve here

    vcbMC - 1.0.6 Beta

    Lite vcbMC - 1.0.7

    http://www.no-x.org

  • Satellite L450D-128 stops responding after about 2 minutes in Normal Mode

    Hello

    I just got a new Satellite L450D-128 running Windows 7.
    Whenever I run Windows in normal mode, all and stops responding for about 2 minutes after that the office and I have to manually turn off the laptop.

    When I run Windows in safe mode, it seems to work ok, but I prefer not having to use safe mode indefinitely.

    Anyone know how I might be able to solve this problem?

    Thanks in advance.

    Hello

    First try to retrieve the device.
    It's not difficult, and the whole process won't take long.

    Turn the unit on and press F8
    Then choose fix my computer-> Toshiba HDD recovery

    This will start the installation of the new.

    I think that this is necessary in order to check if this problem is not related to software compatibility issues

    If the question will always be present while we should follow the investigation
    I mean, in this case, that a hardware problem would be possible

  • WMC LIVE TV PLAYBACK VIDEO AND AUDIO SUTTERS AFTER ABOUT 20 MINUTES.

    Windows 7 ultimate using WMC for watching live TV and have a problem that seems to elude a hotfix running. I see others have this problem in other forums (green button) without a real difficulty.

    While watching live TV, after 20 minutes the video and the Audio begins to stutter badly. Video looks almost like stop action framing approximately two times more than a second and the audio is true chopped until you can't make out what is said at all. A quick fix for this is to pause for about 5 to 10 seconds. Sometimes this only will fix this during about 30 minutes, then it starts again.

    This only effects Live TV and occurs on any channel.

    Someone has an idea of what could be the solution?

    My setup is below:

    Operating system: Windows 7 Ultimate 64 bit SP1
      CPU:  Technology AMD Phenom II X 4 945 78 ° F Deneb 45nm
      RAM: 16.0 GB Dual - Channel DDR3 @ 533 MHz (7-7-7-20)
      Motherboard: FOXCONN ALOE (CPU 1) 81 ° F
      Chart: ATI Radeon HD 4650 (MSI) Standard (1920x1080@60Hz) monitor

    Storage: 931 GB Western Digital WDC WD10EADS-65L5B1 SCSI Disk Device (RAID)
      Audio: Realtek High Definition Audio

    The game, February 6, 2014 17:24:52 + 0000, grandfather of the Zaidens wrote:
     
    | It does not normally start until live TV play between 20-30
    minutes. I guess I'll have to sit down and see if it is triggered by commericals,
    but it does not ever seem to start until after he plays than the length of
    time, so my guess is the first game of commericals isn't the cause.
    |
    |
    |
    | Another thing, it doesn't affect all Extenders. I have three xbox
    and a combined echo and that has never been duplicated on them.
     
    Maybe a driver issue. See
    to confirm, if you look the same on the computer and an xbox
    Extender, you only see it on the computer?
     
     
     
    __________________________________________________________________________________________________
    Barb
     
    MVP Windows Entertainment and connected home
     
     
    Connected world Blog Reader Windows 8 App Barb-
     
     
    Windows and Surface drive Windows 8 App community
     
     
     
    Please mark as answer if that answers your question
     
     
     

  • Video slows down after about 2 minutes of playing time?

    I'm going to watch a video, it plays well for about 2 minutes, then it slows down or starts to stuuter?

    Hi Richard,
    Try this troubleshooting guide:
    http://www.Microsoft.com/Windows/using/tools/IGD/default.mspx

    Eddie B.

Maybe you are looking for