Hot, arrows soft and works do not on Satellite Pro L650

Similar Questions

• Update of the BIOS works is not on Satellite Pro M70-275

  Hey

  Im having a problem, I can not update my bios, I downloaded the right bios file, but when I try to update I get a bsod just until it begins to Flash the bios.

  The biosfile I downloaded is:

  ARKive
  Satellite pro
  Satellite pro M series
  Satellite pro M70 (PSM76)
  PSM76E

  Its the bios 1.70 for win xp

  IM also of problems with my sound, I downloaded the rather and installed, but there is no sound.

  IM using Windows XP SP3

  Concerning
  Lars

  Hello

  BIOS update is necessary? Or what is the intention to update the BIOS?
  Usually if you have some serious problems, the BIOS isn't essential update

  With regard to the sound:
  You can solve the problem in Windows XP, install the KB888111 and KB835221 hotfix before you install the audio driver.

• Satellite Pro L650 - 1 CG-output HDMI not working not

  Laptop: Toshiba Satellite Pro L650 - 1 CG, Intel i3 - 350 M, ATI 5650, 4 GB RAM, 320 HARD drive

  When I connect my laptop to my HD Toshiba TV and select 'Connect to a projector', all I get on the TV is a black screen.
  Catalyst Control Center can 'see' the TV and I can adjust the options of resolution for both screens, but no matter what options I try, I can't the TV to show a picture / sound.

  The TV is obviously detected SOMETHING, because it goes from a blue screen to black. Device Manager, I can see the HDMI Codec but even though he says he is activated, I can't put it as default. It says below that it's 'unplugged', and when I run the HDMI control program, it says "To use the HDMI control, you must activate it".

  I have all the latest ATI drivers / sound, as well as virtually all the drivers up to date there. In addition, there is nothing wrong with the cable or my TV, my PS3 is using the same connection.

  Hi were reluctant,

  Normally, you can switch between monitors or switch to an external monitor only when you press the FN + F5 key combination.

  In addition, I would recommend turning on the external monitor first, then switch on the laptop. You can also choose the right channel to HDMI in on your TV. Then, press FN + F5 to switch to your TV.

• Satellite Pro L650 turns off after start; DC In and Power LEDs blink on stop

  A friend Satellite Pro L650 having worked well until yesterday, all of a sudden turned itself off. Now, at startup, it lights up normally for about 10-15 seconds before turning off suddenly. Turned off, the DC in white/blue LED and the orange Power LED Flash on a broad set of intervals of approximately one second. This extinction happens if I leave Windows or press F2 to enter the BIOS setup.

  I guess this blinking is intended to serve as a kind of diagnostic code, but I have yet to track down what it means. Can anyone help?

  To avoid confusion, power without the product stack the same, sudden stop experience, except the two LEDs remain solidly lit this time. With or without battery, trying to turn on again immediately after that a shutdown produced no response at all. Remove the power cable and immediately it reconnect again and turn then produced a brutal power off, but in less than 5 seconds. More wait between attempts to market seems to give a little longer powered on State, but without fault, the machine turns off just suddenly. With its short time 'turned on' we are talking, there cannot be any kind of thermal protection?

  I had an old Satellite L450D lying around that uses coincidentally the same AC PA-1750 adapter, but use it made no difference. Of course, the battery does not have the L650!

  The only previous numbers, that I am aware of this machine have been intermittent case of Windows reporting "Plugged in, not charging", but as my friend use it exclusively on the network, it was not a problem.

  Your thoughts will be greatly appreciated...

  WTF?

  What is an unmoderated forum?

  Can someone help with my problem?

• Satellite Pro L650 - hard disk is not initialized.

  Hello

  I have a Toshiba Satellite Pro L650 and I am having some problems.

  It all started a few weeks ago, I received the dreaded screen black death (windows could start, but then just came up with a black screen and a cursor. After playing well, I thought that a reinstall of windows would do the trick.

  It worked, but none of my pilots have been installed... After much research, I found my Toshiba repair disc. I put in and went to fix it. At half way through formatting the drive, it came with an error, saying that he was unable to delete a specific file, it asked me to reset.

  So I reset, and it came with a screen with "this disc is not initialized, Please initialize now."
  So I pressed Yes, and it resets, it came with the same screen. and again and again.

  So that's where I am. It is only a year old, and already got the replaced disk. I'm desperate difficulty, I don't want it to become a grammage of paper-dear...

  First of all I m wondering why the message appeared saying that the disk is not initialized have you used the Toshiba restore for the OS installation disc or have you used any other Windows disc?

  On the other hand, it might be possible that your HARD drive is malfunctioning, the cursor blinking in the upper left corner is a sign for this fault
  So I recommend you to check the HARD drive. Use a tool like Drive Fitness Test, for example, it helps you to check the HARD disk
  If errors will be displayed so the HARD drive needs to be replaced

• Re: Satellite M100 - arrows left and right do not work

  I have a Satellite M100 and the keyboard down, left and right arrows don't work, the up arrow works always.

  No idea how can I fix? Thank you

  You can use these arrows (keys) in the BIOS settings?

• I need to know my amd radeon hd m 8730 GC is enabled and works or not.

  Hi guys,.
  I bought a new Dell inspiron 15 3251 with internal graphics card gc-Intel hd 4000
  and AMD Radeon HD 8730 m graphics card
  First, I downloaded the driver for graphics card intel then I downloaded the drivers for Radeon also
  The thing I want to know is it working or not, please check the following pictures and enter into me

  Yes, AMD Radeon HD m 8730 is present and functional. With the second generation and especially Intel Core i series processors, Intel introduced its graphics processor in the CPU (called integrated graphics processor), where computers equipped with these processors, AMD or nVidia graphics (called processor/discrete graphics card), shows two different graphics cardsunder devices. Software graphics card is weak graphic performance as Windows Aero effects. Discrete graphics card is for complex applications such as games or CAD software.

  With this scenario, there is a Switchable Graphicstechnology, which allows to switch between low performance and graphics performance with full transparency. The following screenshots will be useful:

  Go to Desktop-> right click anywhere in the plain. You can see a menu as below:

  

  Click on Configure switchable graphics. You can see a dialog as below:

  '

  Now, to one of the application that you want to change the performance, select the-> click on the arrow down under Setting Graphics -> select High Performance (to use the AMD graphics card) or low yield (to use the Intel graphics card). Then click on apply to use the settings.

• No noise and cache-battery not charging - Satellite L755 - 1 CD PSK2YE-08T00YFR

  Hello

  I have two problems with my toshiba L755 - 1 CD PSK2YE-08T00YFR

  1: no sound

  When I try to grab the microphone into the mic port, the sound Manager, it freezes and any use of sound programmes it freezes like vlc, I turn off the audio Manager Windows, disconnect me and logging devices device when I clicked in the sound icon troubleshooting the problem and the noise come buck and when I again seized the microphone he not freeze the sound Manager , I disable the audio device in the Windows Device Manager, and I continue to work without sound for 30 min ~ 1 h, I reboot my pc to start windows (windows 7, I don't remember what happens may detect a new device), I click on the sound icon troubleshooting two devices (photos attached) I chose 1 and it doesn't solve the problem but the speakers work not , I'm going to the sound Manager I see a disconnected device (maybe my card sound, pictures attached) and two new devices (attached pictures) and I see some changes in the reliable data connector (attached photos), and in the tab input device, I see a disconnected device (maybe my card sound, pictures attached) and three new device a MIC webcam (photos attached).

  before this problem the webcam and microphone webcam not working do not (I think I have hardware problem - webcam with sound card).

  I restart my pc and I chose "load factory default settings" from the bios when windows start detects a new device (webcam) but the sound does not (webcam and microphone webcam works fine now).
  I have try to disable the webcam and sound card, enable the sound card, reboot, load default... linux live cd... nothing, no noise.

  I try to test the bios beep, it works, I can hear a sound signal.

  I don't know how to solve this problem
  I need noise, I miss her, I can't do anything without the sound, please help me

  Attachment 558 Attachment 559
  
  

  2: battery not charging

  My maybe of battery 30 ~ 40%, when I suspend my pc (for 8 ~ 11: completely discharged battery) I forgot to load it, the morning I plugged it in HQ, 2 hours the led remains red when I turn on my pc and check the battery level, I see only 4% (hip, accused), I remove and buck battery but does not support he notices 4%.
  How can I recharge my battery?

  I need fix the sound problem

• The screen works not the Satellite Pro a

  My satellite pro, do not know what model because the sticker is worn, but I think its something like L18850
  When I was with her today, he went to sleep, when I rebooted, it just would not come on the screen.
  I tried removing the battery, now the Start button / stop for 45 seconds etc... That did not work.

  I tried to start and stop a lot of times, it starts the desktop computer, I can hear the sound of it connection, but it seems to take more time for the sound to happen now and it seems to the connection ring twice, 10 minutes apart.

  One of the moments where I turned it on it the screen worked and it has loaded the system recovery, I chose to keep my existing files and the partition, the screen worked for the half-hour it took to recover windows, then when it restarted the screen wasn't working again...

  It's very frustrating as a week ago, that the laptop was with Toshiba repair, there is no previous problems with the screen, I sent him with a cooling fan failure...

  Any help would be appreciated, I need laptop badly I work online and need to pay the rent...

  Sorry to hear that very annoying if computer laptop / computer starts to malfunction.
  From my point of view, no one here in the forum would be able to help this issue, because I think that there is something wrong with the hardware.

  You can connect the external monitor just to check if something is not visible on the 2nd screen but of course, this would not correct the problem of the laptop.

  Maybe the problem is related to the last laptop repair? You said that the laptop has been send to the service about a week ago, it's just a guess, but maybe the technician made some mistakes last time who knows that I recommend you to get in touch with the guys again

• USB ports not working not not on Satellite Pro C650 - 18 d

  Hello
  I have a Satellite Pro C650 - 18 d on which USB ports are dead.
  So far, I've updated the chipset and BIOS - but they stay dead. It doesn't seem to be a power either. I have a USB key with LED and it does not light.

  Any ideas? It's under warranty and so unable to try something wild!

  Thanks for any help
  Jim

  Hi Jim

  I recommend you to reinstall the OS and test the feature with the factory settings. Please, test it with several different USB devices. If none of them works, you must contact the Toshiba service provider in your country and leave check s portable.

  Do you know how to find the addresses and phone numbers?

• Memory 1 GB module works is not on Satellite P10

  Hello world
  I own satellite P10-304.
  According to the data provided by toshiba this model should support up to 2 GB of RAM (1 GB max in one piece). To be sure, I did a test online to check what type of memory is installed and what kind of memory will build on this computer. Test online showed exactly the same...
  Initially, I had 256 MB of RAM. I wanted to extend to 1 GB or 1, 2 GB. I bought 1 GB Kingston memory (KVR333X64SC25 / 1 G) and installed on the computer.
  Of course the new memory has the same CL = 2.5 and PC = 2700... I tested it on another computer - works perfectly...

  Initially, I replaced 256 MB with 1 GB and have to say that this computer does not work. After startup, you can hear the fan running, but nothing happens. The screen is completely empty and you can not even the bios.

  If I replace the memory to 256 MB, computer works perfectly again (except that it's slow :))

  Can you help me somehow please?

  concerning

  Mikolaj

  Hello

  Well, you're right. This notebook should manage max 2048 MB of memory.
  To me, this looks like a module of memory is not compatible.

  I found the information that these modules are supported:
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)
  PC2100 1 GB (PA3278U-1M1G)

  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

• Touchpad not working not not on Satellite Pro A60

  Hello
  Tried the Fn F9. Still no answer. Also tried the setting in the control without result Panel.
  I looked in Device Manager and there seems to be a problem with the touchpad PS/2. Apparently, the device is not present, not working does not or does not have all its drivers installed.

  I don't seem to have the driver available, nor I am able to find anywhere in the internet.

  Any ideas?

  Seems that you need to install the touchpad driver.
  The right of the Toshiba page download and install!

• Touchpad not working not not on Satellite Pro R50 - B - 10 G

  G ' Day

  I installed Windows 10 Pro on Satellite Pro R50 - B - 10 G and the Touch Pad and the function keys don't work no more.

  I turned around & around this problem bloody without any success

  HOW TO FIX?

  I'm a crazy old man & no free self-taught

  Thank you for your time

  Hello

  You have installed all available Win10 updates?
  http://win10upgrade.Toshiba.com/swup...=en&country=GB

• Re: SD card reader works only on Vista - Satellite Pro P100 pspa4

  Hello

  I have a Toshiba laptop Satellite Pro P100 pspa4 with Vista installed.
  I have my SD properly installed host adapter (well looks like in Device Manager)
  But absolutely nothing happens when I insert an SD card.

  I have a Mass Storage Controller not properly installed and I think that's the reason why, but I can t find any drivers for it.

  On XP, everything works fine.
  Anyone know where to find the drivers for that?
  On the Vista from Toshiba driver page I can only find drivers SD utilities.

  Thank you

  Hello

  On the European driver Toshiba page, you will find the Flash Media Driver for Texas Instruments. This is the driver for the Bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  Try to reinstall and the SD card should work!

  See you soon

• Cannot read and write CD/DVD on Satellite Pro L40 - 17F

  I have problems with my laptop (model: Satellite Pro L40 - 17F Cel - M 540 1.83/1GB/120GB 15.4).
  I have problems with the dvd player. When I got the laptop I managed to install a few things but now - on a two weeks later, I can't read or write CDs or DVDs.

  I checked many solutions to fix but does not work. I uninstalled the driver and restarted my computer and it reinstalled the same as that which does not once again.

  Please help me!

  Hi mate,

  may I ask what fire you´ve applications installed on your machine? I ask for the following reason:

  Several installed burning applications may interfere each other, so could not stop the drive works properly.
  Please, try the following:
  Find somewhere a linux cd or something that you can start from, and then try to start and when the disc turns and starts him CD then you know that your problem is not hardware partners, it s more a problem located somewhere in your Windows operating system.

  If the player wouldn even turn or start the inserted media then you know that the reader has some hardware malfunction and must be replaced.
  I guess you still have a warranty on your machine, if yes, then contact the nearest authorized service provider in your country and tell them your problem.
  They are able to help you and solve this problem.

  Welcome them