Hot swap does not

Similar Questions

• Hot spot does not properly

  Here is a link to my file:

  Adobe Creative Cloud

  (Using the latest version of Adobe Edge CC)

  Please can someone tell me why my "hot spot" does not work in the attached file?

  By clicking on each of the small buttons open and close their respective balloons. A hot spot on the entire screen area should be clickable to close the speech bubble

  BUT

  In my file, the area above the "mode_count_bubble" is not clickable, even if the hotspot is in front of the image of speech bubble. The point hot clickable and works as expected if I click anywhere else on the screen.

  If I swap the order of 2 speech bubble symbols so that the "mode_count_bubble" is located in front of the "idle_tether_bubble" the problem stops during the bubble of County of mode and begins to bubble tie idle

  that is any symbol of speech bubble is originally, the hotspot stops working above the word bubble region

  Thanks for the help in advance

  OK, I got it fixed - I deleted the hotspots out of their balloons and created a single generic on the main stage. I then applied conditional code to close regardless of the speech bubble that happened to be open.

  Probably a little more simplified if I find myself with a lot of buttons and bubbles.

• Z710 Touch Pad Hot Key does not work...

  So I just got my z710 the other day. clone the drive (for a rainy day). Then formatted and installed Win7 Pro 64-bit. I managed to get everything in working order, except that I would sometimes like to disable the touchpad. I use a mouse for games and other and access key does not work to turn it off. BTW, all the other hot keys does what its meant to do. Any Suggestions?

  
  

• Add Hot CPU does not work with 2012DC

  Hello

  I have a VM Win2012DC with CPU/Memory HotAdd enabled. This virtual machine has virtual material 9.

  When I add additional processors to this virtual machine, I see in Device Manager, the additional processors, but the system see only old 4 processors.

  I have scessfull add processors on server 2008R2, vmx-09 and 2012-server with vmx-08 and it works very well.

  Anyone have more information on this Bug?

  Falk

  Take a look at this

  VMware KB: A virtual machine for Windows Server 2012 does not recognize hot-add of virtual processors

• Hot sync does not include the Splash ID

  I've noticed recently that Splah ID is not among the items synchronized when I perform a hot sync.  And indeed, changes on the desktop or handheld are not reflected.  I ID 4.03 Spalsh, it is registered.  I've recently updated the hot Sync Manager because it does not work with Vista. Hot sync is now working with standard applications provided with my Zire71, like the address book, calendar, etc.

  I'd appreciate any help getting Splash ID synchronization.

  If you have installed SpashID, you will find the Conduit in the Palm Desktop conduits list.

  If she's not here, but you still have a desktop application of SplashID you can open and run, there may be a problem of current Vista.  Might want to go and visit www.splashdata.com for their Vista info.

  Message edited by smkranz on 04/17/2009 18:37

• Hardware swap does not resolve crashing...

  Hello, I have an iPhone 5s which has experienced a wide range of weird questions (for example, does not have a charge, hangs way random, often insensitive to the buttons/touch, drops calls, etc...)

  I took it to the Genius Bar several times. We did a restore from iTunes > restore from iCloud > replacing the screen > DFU reset, none resolved the problems.

  The Genius Bar gave me a brand new iPhone 5 s. I did a "restore to iCloud", but I have to reconnect to iCloud for contacts, notes and photos. The problems will occur again.

  Any idea what's going on? The iPhone is not used for anything else complicated, barely any extra apps beyond those preinstalled with iOS 9. I think it is extremely unlikely that I received two failures, but I hope I'm wrong...

  Thank you!

  prohnc wrote:

  I think it is extremely unlikely that I received two duds...

  I agree with you.  So let's look elsewhere for the source of the problem.

  prohnc wrote:

  The iPhone... has barely any extra apps beyond those pre-installed...

  That's good, because it means that you won't find in very many places for the source of your problem.  One or more of these applications can be very suspicious.  If they are very commonly used apps for iPhone by many people, they are probably fine.  If this is not the case, consider keeping their (and their data) on your iPhone and see if it helps.

  Also check the settings > general > storage & use iCloud > manage storage (under storage, iCloud no) and make sure that you have a minimum of 10% of the total free storage of your device.

• Hot synch does not illuminate

  I have a Palm Centro (Verizon).  While making a hot sync my computer screen are cleared.  I had to unplug & remove the battery to restart my computer.  When I open Palm Desktop, my data were there except my contacts.  My phone still has the list of contacts as well as everything else.  The know-how of problem is Hot Synch will not open and I get an error message saying "Hot Synch Manager had to close, I want to send an error report.  When I go to program files, Palm, sync - the same message appears.  Don't know what happened or how to get hot synch switched back.  I tried to uninstall all software and reinstall, but nothing works.  Even did a restore of the computer, but nothing.  Any help would be appreciated.

  OK, it seems that your appointment has corruption. When it "hangs" on a lead PIM, it is usually caused by corruption, the blobs in the calendar, records without data that was there at some point in time.

  There may be the database at the source of the problem. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will search the database and then to declare the corruption. You can then search records at the origin of the problem and fix them yourself or you can buy the program and do it automatically repair records.

  http://www.pimlicosoftware.com/dbfixit.htm

  When you install the program, set the conduit for appointments to do nothing. Run the trial version and it will show the corrupt files. You can then challenge the records manually or buy the program and take the database for you. The program is only $12.95 but is invaluable when it comes to repairing the database. You must also run the analysis to the blobs of calendar.

  After the repair of the database on the Centro, defined lines in hotsync manager for handheld overrides desktop.

  Message relates to: Palm i705

• Hot Sync does not

  When I try to Hot-Sync, that's what I get:

  HotSync operation ended up. Some of your data was NOT saved.  Out of storage space during the update of database-MemosDB-Mmtp-abandonment sync.

  How can I fix it.  The Palm OS system is BEST done planning, I can't live without it.  Thank you, Michael

  One thing you might try (if you have not already done, sorry if it has been discussed in this thread and I missed it), is to make a "uninstall own" Palm Desktop, followed by resettlement.  Then Hotsync.  Take a look at this thread.  It is to change your computer's registry, so be very careful.

  I don't think that the amount of data in your calendar is the issue, despite any errors that you have found.  It seems more likely that there is corrupted data.  But it is handheld against his memory capacity?  Check by typing the time in the top left of the main screen of Launcher to open the Menu, and then tap Info which will tell you how much free space is on the device.

  Try to hard reset the device, and then restore from NVBackup.  HotSync and see what happens.  Data in NVBackup, as long as you don't accidentally erase good backup, you're always minutes from restoring your data and try something different.

  6 appointment of Pimlico Software will allow you to purge calendar events more than any date you choose.  So you can unload on the handheld calendar events that have more than, say, four years and keep everything that is more recent.  6 appointments is (was) probably the best, most versatile and most awarded third-party Palm OS application.  Last time I looked, they were offering it at a discount.  There is probably also a free trial, but I've not really looked at who lately.

• S440 got hot now does not start

  Hi, I was wondering if anyone can help.

  I have a s440 which I can't start no red at all - no keyboard, no led lights. He has been on the charger for a few hours, but no response. A few days earlier, I close the lid, put it in a pile of paperwork and left... that he felt quite warm when I whnt to him (don't think it was put into hibernation and did not have good ventilation)... wondering if that has something to do with it... does anyone have any suggestions for what I can do to solve the problems? Remove the battery etc? Or is it more likely that the motherboard needs to be replaced?

  The laptop second hand arrived with charger... that I plugged it... and the original worked well... ugh. I should be whipped and shunned by the forum. Inside out I now have two s440s and an on-site warranty of new Megane improved 14 months... and reinforced with a life lesson... . Check the basics first. Thanks for your suggestions... another charger was ordered.

• HP pavilion dv4 (1287cl) computer laptop laptop gets hot and does not load then

  Hi guys, my hp pavilion dv4 1287cl gets hot and the fan emits noises.
  WHN it has fully charged so I remove the plug charger and it's cold as hell. This only happens when it's warmer and the fan makes noise that is made all day.i use for programming and playing games like minecraft. also it is not sometimes load when it is warmer more when the fan is the production of abnormal voice.

  I'm started to get upset with that I had broken the screen and keyboard (but had then replace them) because it makes him angry.

  I live in pakistan so u kn on load shedding and the electriccity turns off like after like every 8 hours and it freezes.

  Please help me guys.and thanks for reading this story together soft

  Hello

  Click on the link below:

  The fan runs constantly, the PC is running more slowly than expected and generates heat

  Note:

  We suggest that you should try to update the Bios.

  The update of the Bios?

  Download the latest update of the Bios for your model specific here.

  Connect the power adapter to the netbook.

  Disconnect from the Internet. Close all running programs. Disable anti-virus and firewall.

  Double-click the Bios update exe file. It may take some time, so it is important to remain patient, not to interrupt the process. Allow the laptop to restart after applying the BIOS update.

  Although this update is running are not:

  • Turn off your laptop,
  • Disconnect the power adapter,
  • try to run any software or do anything on the laptop.

  Note:

  The Bios update process is always risky. You do this at your own risk.

• Hot Sync does not download

  I have tried 2 different computers. Have Windows 7 64 bit, and then press download to the tungsten e-2.   This is the URL

  http://kb.hpwebos.com/wps/portal/kb/na/tungsten/e2/unlocked/downloads/page_en.html. Just get a white and no download.  I'm doing something wrong?

  Hello and welcome to the HP support community!

  The download links are broken and will never return...

  The good news is I have the software, and it is available in the first post in this section!

  I guess that you are looking for Palm Desktop 6.2.2.

  WyreNut

• I can't redeem my education 12-month prepaid membership page swap does not work?

  I m very frustrated because I just got this product, the page Exchange will not let me type in something like my college or whatever it is. Whenever I type nothing happens?

  If you still have questions and need to contact our support staff, please try this link:

  Contact Adobe Support/encore need help

• Installed ESXi on USB/Flash but swap does not seem to have been placed on the virtual disk

  Hello

  I've read several times that when you install ESXi 5.1 on flash media he creates a work space available on a virtual disk of 4 GB in/tmp/scratch so that the USB itself is not used for temporary data to extend the life of the USB.  However, this doesn't seem to be from my experience and I was wondering if someone can help me to confirm that my disc scratch is actually on a virtual disk or whatever on the USB.  I should mention as well as installing ESXi has identified correctly as 'flash' disc type and the disc as a "Generic USB drive»

  After installation, I noticed two things:

  1 log-in user activity logs are able to survive a reboot (I don't think they should the ramdisk is dissolved after a reboot)

  2. There is no directory with the path/tmp/scratch

  Unfortunately I can not directly determine where the partition scratch is (be it on USB or RAM) because I did not have a file ' / etc/fstab "watching (even if I under ESXi 5.0 disk a hard base install?) and it doesn't seem to be a 'mount' command I can use to look at the existing mounts either.

  Can anyone tell me what can I do to verify that the directory used for temporary files is actually a virtual disk and not on the USB drive itself?  Hours of research are presented only the forum messages and documentation clearly indicating that the file will use "/ tmp/scratch", but that just isn't the case.

  Thanks in advance for all your help.

  As you can see from the output

  ~ snip ~

  drwxr-xr-t 1 root root 1260 28 Dec 23:08 50de22a5-f4afafa0-f7b5-001517197ad8
  root drwxr-xr-x 1 root 8 1 January 1970 50df4c30-82b86e61-8522-001517197ad8
  lrwxr-xr-x 1 root root 35 1 Jan 22:21 640GB_WD_Black_AALS-1 -> 50de22a5-f4afafa0-f7b5-001517197ad8

  ~ snip ~

  the UUID is a store existing data "640GB_WD_Black_AALS-1".

  This proves that with an existing data store, a folder ".locker" (which is a ScratchLocation) is automatically created.

  André

• Hot Sync does not desktop to handheld

  My Palm Zire m150 broken. So I bought a "little used" on EBay. BIG mistake. I used the Palm for the past 5 years with no problems, which is why, my reasoning for the purchase of another.

  In any case, I can't get the information on my desk calendar to synchronize in the handheld. The default values are set to "desktop substitutes Pocket" and nothing.

  Help, please! In addition, the pocket computer restarts after each sync?

  Also, if someone could recommend an upgrade, I can easily move my calendar information, address, etc, I would be very happy. I'll buy something else. All those wasted hours are simply not useful to save a few dollars.

  Thanks in advance for your time and effort.

  Let's review.

  1. can you see all of your data on the desktop?  If so, run the repair tool to verify the alteration.  Tools/Options/tab / check now.  If no anomaly, it's good.

  2. do you Hard Reset of the 'new' device correctly?  I guess you saw "Clear all data, Y/N?" and you then hit the UP button?

  3. I suggest you Hard Reset the new device, check to see if it is working properly (some applications open, just to see if it attempts to reset).  If it works, good.

  4. as you get problems reset on the device, it's time to rename a folder in your Palm on your PC directory.  I am assuming you are using the right to Palm Desktop 4.x version?  Look in the C:\Program Files\Palm\ your HotSync name abbreviated \Backup is where it is located.  Rename the folder /Backup /BackupOLD.   Open Hotsync on your PC Manager icon, select custom and then press the 'Default' button to set all lines back to normal.

  5. now, you can try to Hotsync on the device you just erased with a Hard Reset.  When Palm Desktop application to "Create a new account" or select "Use an existing" use existing and select the user account that includes all of your data.   All of your PIM data should return, but no file problem that can cause the resets.

  I hope we can get this to get this mess straightened out.

  WyreNut

• 9800 Simulator Reload/Hot Swap with Eclipse 1.1 does not work for me

  Hello

  I've updated all plugins Eclipse today range below;

  BlackBerry Java plug-in 1.1.2.201004161203 - 16 net.rim.EclipseJDE.feature.group
  BlackBerry Java SDK 6.0.0.29 net.rim.ejde.feature.componentpack6.0.0.feature.group
  BlackBerry Java SDK 5.0.0.25 net.rim.ejde.feature.componentpack5.0.0.feature.group
  BlackBerry Java SDK 4.7.0.57 net.rim.ejde.feature.componentpack4.7.0.feature.group
  BlackBerry Java SDK 4.6.1.49 net.rim.ejde.feature.componentpack4.6.1.feature.group
  BlackBerry Java SDK 4.6.0.23 net.rim.ejde.feature.componentpack4.6.0.feature.group
  BlackBerry Java SDK 4.5.0.28 net.rim.ejde.feature.componentpack4.5.0.feature.group

  I try to get hot to labour in the 9800 unsuccessfully Simulator code swap. All the online documentation says it should work and I saw the evidence that it works on the old JDK to http://supportforums.blackberry.com/t5/Testing-and-Deployment/How-To-Use-Hot-Swap-with-the-BlackBerr... . Nice article... but it does not mention the eclipse plugin. I can't find "Simulator of reuse" check box on one of the eclipse debugging configuration forms!

  When I change my code and trying to debug a second time, I get the message "A BlackBerry debugging session is already active."

  I can run the Simulator 9800 ok, but it takes 10-15 minutes of startup: ^(et cela tue ma productivité.)

  Could someone rim give a clear statement or point me to a final resource stating if hotswap is supported on the eclipse plugin.

  Thank you

  Randy

  I got it work after trying two additional things. I don't know which one solved the problem.

  1. I had an entry in my environment variable path pointing to a directory of 'bin' of the eclipse plugin that I deleted old.

  2. I did a complete new installation of the classic eclipse 3.5.2 1.1.2 BlackBerry plugin eclipse and plugin SDK 6.0.

  Don't know which of these things is switchable hot work.

  I still get traded an exception when the debugger attaches more switchable hot but if I click here my code gets hot and I am able to continue debugging on the 6.0 9800 Simulator so I'm a happy guy