"Hotfolder" to monitor and perform actions

Similar Questions

• routine to check the status of connecton and perform actions

  I'm looking for a way to check the status of a server about if it is connected or in maintenance mode after I reload a host.

  Here is the excerpt I got so far

  Do

  {

  $GETHOST = get-vmhost $ESXHOST

  $GETSTATE = $GETHOST. State

  If ($GETSTATE - eq 'Maintenance' - or $GETSTATE - eq 'CONNECTED')

  {

  $CONNECT = $True

  }

  on the other

  {

  $CONNECT = $False

  }

  } until ($CONNECT = $True)

  The erroractionpreference will continue: $ErrorActionPreference = "continue".

  But I can't get it to work properly, it does not work after the first cheque and there is the loop.

  Who has a good idea in order to solve this problem?

  Rob, your test in the until loop is not correct.

  This should be "-eq ' instead of '='.

  do{
       $GETHOST = get-vmhost $ESXHOST
       $GETSTATE = $GETHOST.State
  
       if ($GETSTATE -eq "Maintenance" -or $GETSTATE -eq "CONNECTED"){
            $CONNECT = $True
       }
       else{
            $CONNECT = $False
       }
  }until($CONNECT -eq $True)
  

• _ "Boot Performance Monitoring" and "stop Performance Monitoring. __

  I just looked to the top of the page "Event Viewer" and discovered 1 791 itemsmarked as 'endangered', 'Critical', 'Error', etc, etc, etc.!
  They seem to be linked to "Boot Performance Monitoring" and "Stop Performance Monitoring", etc., etc., etc..!
  How can I fix all of these issues, please?
  I have a little trouble with my home computer private.
  Whenever I turn on my PC, it takes a long time to start (is that what you call "Booting"?).
  Also, when I want to turn my PC off, it takes a long time to close.
  I tried a few computer maintenance such as: -.
  CLEANING DISC,
  THE FRAGMENTATION OF THE DISK,
  etc.,.
  but they have not alleviated the problems at all.
  Can someone help me with this please?
  Any assistance, information, suggestions, etc. would be greatly appreciated.
  Thanks !
  
  Alan Merrington
  E-mail address is removed from the privacy *.

  Hello

  Normally how long will it take to start a power off of the State? How long does take for
  Stop for a shutdown of the State?

  Use this simple free utility to read these events and it makes it easier to paste them into one
  message here. Do these after the SFC and CheckDisk as below.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ==========================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================================

  Keep these practice to check possible error messages if they return.

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Reliablity and performance monitor is empty

  I was just playing on Vista, now that I finally got and decided to launch the performance and reliability monitor to see why my computer was using up to 1.6 GB of RAM at idle. Not that she really bothers me or hurts my performance of the computer (after x 64 windows and 6 GB of RAM), but after opening it, I was a little confused because nothing was actually happening. I went to the monitor tab, you press start, but who have done nothing. I also tried to pass through the computer management program, but the same exact results. The work of monitors of reliability and performance, but the main screen, which shows the performance used by individual programs won't give me empty graphs, of the options and outcomes - although lack of. Any help would be great.

  This is just a screenshot of what happens:
  http://i562.Photobucket.com/albums/SS68/ThuggyWuggy/NewBitmapImage.jpg

  Well, I did everything what should have made the monitor, at least, I don't think that I did... the only thing that I changed the activation cool no silent mode for my CPU on my motherboard options, so I would not use too be able to leave my computer on all night. The monitor now works... If it stops working again, I'll post, but that seems to have been the cause. (?) It seems weird to have solved anything, but w/e... I do not know... I don't understand. I'll leave it is open for a day to make sure that it is the question. If this is the problem my motherboard is a version of Platinum bios msi k9a2 1.4, so others know how to solve this problem.

• Reliability and performance monitor

  I use a Vista Home Premium based computer laptop HP.

  I find that I can access is no longer the reliability and performance monitor. When I try to access the report, I get the following message to come. Error: An error occurred trying to generate this report. The interface is unknown.

  I searched the internet, but have not been able to find a solution.

  I use a Vista Home Premium based computer laptop HP.

  I find that I can access is no longer the reliability and performance monitor. When I try to access the report, I get the following message to come. Error: An error occurred trying to generate this report. The interface is unknown.

  I searched the internet, but have not been able to find a solution.

  I know how to solve this problem

  Try this:

  go to the reliability and performance monitor, then in the section reports on the left, click system diagnostics then delete all generated reports (click on each and then delete) in there, then try to generate the new report.

  the reason for this error is that you have canceled or closed the report while he produced it!

  I hope this helps!

• A single JS script can perform actions on files I and Ps?

  I'm pretty new with the Adobe extended Script thing, but I have a good understanding of the JS language and scripts.
  The task I need to perform should look like this:

  -export a .jpeg of AI
  -Open a pre-existing Ps file
  -import the exported .jpeg
  -perform actions and save

  One script do all the work?
  If so, is it enough to just start photoshop, maybe #targeting it?

  Thanks for the support, this will help a lot to simplify things in my studio.

  There are examples on the Forum, perhaps they can help you:

  I want to know how to use the 'bridge to talk. "

• I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  Hello

  1. what operating system is installed on the computer?
  2. what web browser are you using to play the games online?
  3. don't you make changes to the computer before the show?

  If you use Internet Explorer, then I suggest you to try the steps from the following link:

  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246
  
  Additional information:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Solve game problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problems

  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

  Troubleshoot display with Microsoft games
  http://support.Microsoft.com/kb/263039

• Refresh rate changed on the monitor and now my monitor has no picture

  original title: hertz problem

  I accidentally changed the hertz on my settings from 75 to 85. now my screen will not show the office. but it does not display the dell and windows screen but not welcome screen. How can I change it to 75 hertz?

  Hello

  When you start your pc, press the F8 key to bring up the menu in advanced mode (you will need to keep tapping F8 after your early pc and passes the BIOS and before windows xp screen screen), select the VGA Mode (if available) and press ENTER. This will start your computer in VGA Diagnostic mode, you should be able to see your screen and connect. After login, click Start-> settings-> Control Panel-> display-> settings-> Advanced-> monitor and select 60 in the drop-down list box.

  Click ok on the screen. Perform the normal restart and see if it works.

  If you don't get the option for the VGA Mode, select Safe mode and accomplish the foregoing to see if it works.

• can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  You define 'Action close lid' to the 'status quo' instead of sleep or Shut down:
  Go to-> double click "Power Options" Control Panel-> 'Select a power plan' under your selected plan, click "Change plan settings"-> "Change plan", click on the blue link 'Change advanced power'-> in 'Advanced settings' tab expand "power buttons and lid"-> extend the action of the 'close' lid, set "on battery" and "Plugged in" to "Do nothing"-> click apply-> OK button

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Set up multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

  Understanding multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

• JSX to perform actions.

  I'm looking for a script for Illustrator that performs actions of my set of actions

  It will satisfy your search:

  app.doScript("Action 1", "Test Actions");
  

  Make sure you have an action called 'Actions of Test' and an action called "Action 1" inside.

• [ADF, JDev12.1.3] When the operationBinding.getErrors () .isEmpty () which are 1) common causes and 2) actions recommended to do?

  Hallo,

  When you call a method from the link layer errors my arrive and the code base to make sure it is...

  if (! operationBinding.getErrors().isEmpty()) {
    // Error handling
    return false;
    }
  

  In the error handling, we can save the error and perform other actions.

  List errors = operationBinding.getErrors();
  Throwable t = null;
  Iterator<Throwable> it = errors.iterator();
  while (it.hasNext()) {
    t = it.next();
    log(t.getMessage());
    // Specific action for the exception
    }
  

  Given that my error handling section don't ever serve during the tests... I ask you what kind of error may occur when you call a method in the link layer?

  What are the common mistakes that can happen?

  What actions are usually performed in case of error?

  Cancellation of the transaction?

  Output of the application?

  What have I to do not forget to check?

  Thank you

  Federico

  Federico, read http://www.oracle.com/technetwork/issue-archive/2013/13-mar/o23adf-1897193.html , who read the part called "Oracle ADF Error Handling Architecture". Frank described here kind of mistakes that each layer can lift and how to manage them. You can even start your own exceptions derived from local and get in the list.

  Delivery errors, it's something you have to decide on each case. Get an error while you commit could do a necessary restore, but only sometimes display a form one let the fix for the user of the problem. If you call a method in the rich throws module request a mistake because a service is not available, you can continue if you do not need data he or so while the application if the data are required.

  It must be decide for ach calls you make. In general you must connect at least a message with error to leave to find the best solution in a later version, and then just to save the message.

  Timo

• Navigator 1.2 infrastructure monitoring and alert

  I was under the impression that the Infrastructure Navigator made monitoring and alert services and applications where if something doesn't work more or had problems he can inform you through something like the email or SMS, etc.. From what I've seen, it seems that it only shows you what services are running on a virtual machine and the dependencies with other servers. Is this the case or am I missing something?

  You are right. vCenter Infrastructure Navigator is a discovery of the application, mapping and dependency visualization solution and not a demand one performance management.

  vFabric Application Performance Manager (APM) provides a complete application of the surveillance capabilities. APM settles with two components: vFabric AppInsight of Transaction and Code level followed (byte code instrumentation is courtesy of spring Insight) and vFabric Hyperic for middleware and OS monitoring.  More details and example of using hyperic within the MPA can be found here: http://bit.ly/MsO5Dl

• Monitoring and warning of the Essbase administration Console.

  Hi gurus,
  
  We run a calculation scripts in Essbase 11.1.1.1 about 4 times a day. Sometimes these scripts just failed or are taking too long. Is there any machanisim/configuration in EAS that when scripts fails, then the administrator or users can get the message?
  
  Thank you
  -Samar-

  Hi Samar,

  EAS will not give you this. However, there are tools that will be.

  Accelatis ascent Suite will offer a full range of capabilities to address what you need and well more. It will monitor your logs, you set the track events, and take action (send an email, kill process, etc.) on failure or success.

  If you want to go on the free road, I think that the first step is to take a look at jRightLog. It provides journal of decantation and analysis in a format where you can then store the data in a database somewhere for later analysis. Once you get the data in the database, you create a server to monitor and provide feedback as it does.

  http://code.Google.com/p/jrightlog/

  Robb

• Tecra W50 - Has R/W - speed and performance

  Hi, received the new Tecra W50 - a and have to say I'm gutted with the speed and performance.

  8.1 we partitioned the drive 50-50 and the reading/writing is terrible. If I copy from C: to D: I lucky to get 10 Mbps

  Copy from or to external Sata I get more of 50mbps and around the same by ethernet.

  I got rid of the partition and tried to copy locally and get the same result.

  The Task Manager displays disk to 100% performance all the time and I can't do with my machine while copying going on.

  Copied 2gig file 1 and it happens in seconds. Try a folder with a few thousand of files and everything grinds to stop.

  Any ideas greatly appreciated

  Type of drive is MQ01ABD100H 1 TB and I have 3 machines to do the same thing

  Thank you

  Lee

  Type of drive is MQ01ABD100H 1 TB and I have 3 machines to do the same thing

  There is an SSHD (SSD hybrid drive) a combination of SSD and HDD.
  SSHD performance depends on the cache controller (SSD).
  Why?
  The flash cache is used for the most used data... the special controller must decide what data will be loaded into the cache.
  But the SSHD needs some time to 'learn' data that uses the cache and the write speed at the beginning would be similar to the common HARD disk.
  After some time this performance will increase and the SSHD should reach the higher writing speed.

• Speed/performance of my mac mini (mid-2010) is very slow. Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.

  My mac mini (mid-2010) speed/performance is very slow - think of it as a result of letting my kids do "whatever" about it in recent years.  Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.  You will also need to get data out of old PowerBook G4.

  < object edited by host >

  We are users like you.  Search locally by using something like Yelp or similar

  http://www.Yelp.com/search?find_desc=Apple+repair & find_loc = Chicago, + IT & start = 0 & ortby = rating s

  or read a few links which may be relevant on this forum about the slow mac mini

  http://BFY.tw/5C63