How a control string works as an indicator as well as a control

Similar Questions

• Drag the control example and how to record a value of the indicator?

  Hello world

  I want to drag the Boolean buttons on my front panel in the time of execution, how can I do?

  I remember that I have seen an example or why, it's a map on the front panel, but I don't remember the name TT someone knows?

  and the second question is how to store a value of the indicator, like the first time, you set the value and close the vi and run it again, the value will remain unless you change in the second run time?

  Thanks in advance

  Thanks to you two, are there good examples of mouse followed the structure of the event available?

  and my second question is for example: read a file using the vi, I created the first, that the value of all the positions of the button on the front panel, and the 'get file vi extension' shows the name of the file on the front panel. then I close the vi and open it again, the button positions is always there where they are, but the file name string is empty.

  How can I save the filename so indicator when I opened that vi still once, if not the other position button file selection, the filename indicator still shows the previous name?

• Satellite M100 with Debian - how to control the power and the cooling fan on

  Hey,.

  I M100 and I installed debian, works very well, but there is a problem.
  Cooling fan turns on the top speed of all time. I m not shy on unix.
  How can I control cooling fan?
  How to control the power to the laptop?

  Hi mate,

  have you ever heard of the toshutils? I highly recommend trying these tools. Just google for toshutils and you'll find a few nice applications. Should usually be included in the distribution you have, also, I would check with 'apt - get search toshutils.

  See you soon

• How to control the selected area in the field

  I'm trying to find how to control him are selected a field so when the field is selected only a part of the field is highlighted. I can't find a way to do this other then stir in a small field within a field not selectable largr.

  Any suggestions on how to do it?

  Thank you!

  Hi crispoyz,

  You can override the drawfocus fields for this method.

  Try with this code. This is an example of code just to understand.

  class CustomField extends Field
      {
          int width = 100;
          int height = 100;
          String _text;
  
          public CustomField(String text)
          {
              super(Field.FOCUSABLE);
              _text = text;
          }
  
          protected void layout(int width, int height) {
              setExtent(getPreferredWidth(), getPreferredHeight());
  
          }
  
          protected void drawFocus(Graphics graphics, boolean on)
          {
              if(on)
              {
                  graphics.setColor(Color.GREEN);
                  graphics.fillRect(20, 10, getPreferredWidth()-50, getPreferredHeight()-30);
                  graphics.setColor(Color.RED);
                  graphics.drawText(_text, (width - getFont().getAdvance(_text))/2,(height - getFont().getHeight())/2);
              }
          }
          protected void paint(Graphics graphics) {
              graphics.setColor(Color.RED);
              graphics.drawRoundRect(0, 0, getPreferredWidth(), getPreferredHeight(), 20, 20);
              graphics.drawText(_text, (width - getFont().getAdvance(_text))/2,(height - getFont().getHeight())/2);
  
          }
  
          public int getPreferredWidth() {
              // TODO Auto-generated method stub
              return width;
          }
          public int getPreferredHeight() {
              // TODO Auto-generated method stub
              return height;
          }
      }
  

  Thank you.

• How to control the spacing between the objects as they scale

  Hello community Muse,

  I am re-creating a report of InDesign in Muse and came across an issue where, when the browser width shrinks I graphic scale but they end up with huge gaps between them.  I'm eager to graphics to remain hidden under the other.  Can someone help me understand how to control this Muse?

  Thank you!

  Please see the link test here:

  Homepage

  Everything should work normally, as you'd expect. Just trying to help Muse idetifying objects, which should be pushed down: ensure that these objects don't overlap and combine them.

• How to convert string input streams

  Can someone tell me how to convert string input streams...

  There are multiple ways. I will list down few of them.

  With the help of the old solution and standard java.
  

  publicstaticString fromStream(InputStream in)throwsIOException {    BufferedReader reader =newBufferedReader(newInputStreamReader(in));    StringBuilder out =newStringBuilder();    String line;    while((line = reader.readLine()) !=null) {        out.append(line);    }    returnout.toString(); } returnsb.toString();

  If you use Google-Collections/guava-

  InputStream stream = ... String content = CharStreams.toString(newInputStreamReader(stream, Charsets.UTF_8)); Closeables.closeQuietly(stream);

  If you use the common Apache library... then it is worthwhile.

  StringWriter writer =newStringWriter(); IOUtils.copy(inputStream, writer, encoding); String theString = writer.toString();

  Quick way but only work during deserialization.

  String result = (String)newObjectInputStream( inputStream ).readObject();

  Note: ObjectInputStream is on deserialization and the flow of data must respect the Protocol of serialization to work, which may not always true in all cases.

  Ultimately, the most effective solution and only in two lines using java class Scanner.

  Tricky is to remember the \A regex that matches the beginning of the entry. It actually indicates Scanner to mark all of the flow, from start to beginning next (illogical).

  publicstaticString convertToString(InputStream in) {    java.util.Scanner s =newjava.util.Scanner(in).useDelimiter("\\A");             returns.hasNext() ? s.next() :""; }

  Read more: http://www.techartifact.com/blogs/2013/11/how-to-readconvert-an-inputstream-to-a-string.html#ixzz2lvy5muix

• How to split string separated by commas and pass to the clause of the select statement

  Referring to article How to divide string separated by commas, then pass to clause of a select statement, tquery that there the following plan:

  Query1:

  select * from emp where ename in (
      select regexp_substr('SMITH,ALLEN,WARD,JONES','[^,]+', 1, level) from dual
      connect by regexp_substr('SMITH,ALLEN,WARD,JONES', '[^,]+', 1, level) is not null );
  

  Base1:

  Plan hash value: 4242290184
  
  
  --------------------------------------------------------------------------------------------
  | Id  | Operation                       | Name     | Rows  | Bytes | Cost (%CPU)| Time     |
  --------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT                |          |     1 |   133 |     7  (29)| 00:00:01 |
  |*  1 |  HASH JOIN                      |          |     1 |   133 |     7  (29)| 00:00:01 |
  |   2 |   VIEW                          | VW_NSO_1 |     1 |    46 |     3  (34)| 00:00:01 |
  |   3 |    HASH UNIQUE                  |          |     1 |       |     3  (34)| 00:00:01 |
  |*  4 |     CONNECT BY WITHOUT FILTERING|          |       |       |            |          |
  |   5 |      FAST DUAL                  |          |     1 |       |     2   (0)| 00:00:01 |
  |   6 |   TABLE ACCESS FULL             | EMP      |    14 |  1218 |     3   (0)| 00:00:01 |
  --------------------------------------------------------------------------------------------
  
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
  
     1 - access("ENAME"="$nso_col_1")
     4 - filter( REGEXP_SUBSTR ('SMITH,ALLEN,WARD,JONES','[^,]+',1,LEVEL) IS NOT NULL)
  

  However, the following query generates the plan I want:

  Query2:

  select * from emp where ename in ('SMITH','ALLEN','WARD','JONES');
  

  Plan2:

  Plan hash value: 3956160932
  
  
  --------------------------------------------------------------------------
  | Id  | Operation         | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  --------------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |      |     4 |   348 |     3   (0)| 00:00:01 |
  |*  1 |  TABLE ACCESS FULL| EMP  |     4 |   348 |     3   (0)| 00:00:01 |
  --------------------------------------------------------------------------
  
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
  
     1 - filter("ENAME"='ALLEN' OR "ENAME"='JONES' OR "ENAME"='SMITH' OR
                "ENAME"='WARD')
  

  Can I change the query1 query for plan2?

  As Juliet was mentioned in the first SQL that you generate from the ENAME list that you must pass in the IN clause when executing. But in the second SQL, it passed as a static value. So first SQL must do more work. So you see a different execution plan.

  But this is a work around to get what you are looking for. But I can't say it's a foolproof method. But anyway here you go.

  SQL > var ename_list varchar2 (100)
  SQL > exec: ename_list: = 'SMITH, ALLEN, WARD, JONES ';

  PL/SQL procedure successfully completed.

  SQL > select *.
  2 of PEM
  where the 3 «,» | : ename_list | ',' like '%', | Ename | ',%';

  EMPNO, ENAME, JOB HIREDATE DEPTNO ID COM SAL MGR
  ---------- ------ --------- ---------- --------- ---------- ---------- ---------- ----------
  7369 SMITH COMMITTED 7902 2975 2 APRIL 81 0 20
  7499 ALLEN 7698 1600 20 FEBRUARY SALESMAN 81 300 30
  7521 WARD 7698 1250 22 FEBRUARY SALESMAN 81 500 30
  7566 JONES MANAGER 7839 2975 2 APRIL 81 0 20

  SQL > select * from table (dbms_xplan.display_cursor);

  PLAN_TABLE_OUTPUT
  -------------------------------------------------------------------------------------------------------
  SQL_ID, 848zhvbvgf7d6, number of children 0
  -------------------------------------
  Select * from emp where «,» | : ename_list | ',' like '%', | Ename
  || ',%'

  Hash value of plan: 2872589290

  --------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |
  --------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |      |       |       |     2 (100) |          |
  |*  1 |  TABLE ACCESS FULL | EMP |     1.    38.     2 (0) | 00:00:01 |
  --------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------

  1 - filter(','||:ENAME_LIST||',' LIKE '%,'||") ENAME "|", %')

  19 selected lines.

  SQL >

• How to split strings?

  Hello

  I'm using action made by Christophe (http://www.vcoteam.info/learn-vco/code-snippets-cancel-one-of-your-running-workflows.html) in order to cancel some workflows.

  Since the selection for tokens window does not display the parameters of the token, I created another entry for my workflow that is supposed to contain the name of the virtual machine, only for infomational purposes.

  I created an action to do this. When I use just "return myWorkflowToken.getInputParameters ();" then all settings are written to the input box.

  In my case, it looks like this:

  {ram = 3000.0, date = Mon Jan 24 16:25:16 THIS 2011, vm = < @id = FinderResult' VC:VirtualMachine/si0vm271/vm - 852' @name = "si0vm562" >, UC = 3.0}

  Since I need only the name of the virtual machine, in this case the part after @name (si0vm562), I need to retrieve it somehow off the chain.

  In the Orchestrator API, I found the String class with the method 'split '.

  At first, I tried to split the string into two parts using this code:

  var params_s = myWorkflowToken.getInputParameters ();
  var params_a_s = params_s.split ("name");
  return params_a_s [1];

  But when I run the workflow, the input dialogue tells me that the "split" function cannot be found.

  How can I retrieve the VM name on the report of a running workflow?

  Thank you

  Concerning

  Andreas

  Hi Andreas,

  I don't think that splitting strings works for your case.

  In fact workflowToken.getInputParameters () does not return a string. It is ch.dunes.scripting.jsmodel.JSProperties instead (you can check this of the Orchestrator client tools-> API Explorer). The split function is not found on the params_s variable.

  In order to achieve your goal, you can try the following:

  get the vm parameter

  Use the parameter name. This is the vm used according to the result of your message

  VM var = workflowToken.getInputParameters () .get ("vm");

  You can check for safety if the virtual machine is defined, except that the virtual machine is the required parameter

  If (vm! = null) {}

  return vm.name

  }

  The code snippet above you should return the value set for the parameter of the virtual machine.

  Hope this helps,

  Martin Marinov

• How to control the number of fields in the Advanced mode in &lt; af:query &gt;

  Hello
  
  How to control the number of fields in the Advanced mode in < af:query >?
  
  Say I have 20 fields in my table, and I created a view of criteria with 2 fields. This would work perfectly in basic mode. But in Advanced mode , the choice of fields is possible by clicking on the Add fields button. I didn't have the customer to search with all 20 fields. Only 10 fields must be listed in the Advanced Mode, even if there are 20 fields in my table.
  
  How can I control the list of fields in ADDFields button?
  
  Any ideas?
  
  
  
  KR

  You can uncheck the contestable ownership of attributes that you must not appear in the Advanced Mode (but they will not appear in the other modes too!) or by programming the value the same as those mentioned here.

  http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.html

  Also, you can hide the button AddFields as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

• How to control the Captivate 4 variable using Flash Action Script 3.0?

  Hi all.

  I'm working on Captivate 4.

  According to my requirement, I need to control externally Captivate system variables in Flash using the AS3 version.

  I found a script somewhere in the forums to control system in AS1 and AS2 variables. But I need them in AS3.

  "this._parent._parent._parent.rdcmndPause = 1;  "

  "this._parent._parent._parent.rdcmndresume = 1;  "

  I tried the same way in the AS3 version but could not do.

  It is an important condition for me.

  How to control variables in Flash AS3 Cp4?

  Kind regards

  Kartik.P

  Use the following code:

  MovieClip (this.root) .rdcmndPause = 1;

  MovieClip (this.root) .rdcmndResume = 1;

  This should solve your problem

• How the prisma app works on mac after downloading itunes

  How the prisma app works on mac after downloading itunes

  I don't think they have a Mac version. The following a https://itunes.apple.com/us/app/prisma-art-photo-editor-free/id1122649984?mt=8 present in the compatibility section in the left column that it is compatible with iPhone, iPad and iPod Touch. Applications you download through iTunes to a Mac would be then be synchronized the Mac one of these devices.

  Store applications designed for the Mac can be downloaded from the Mac App via the Apple menu > App Store and iTunes is not involved.

• How to me to work with Outlook 2016 and 10 windows iCloud?

  How to me to work with Outlook 2016 and 10 windows iCloud?

  1. uninstalled and reinstalled iCloud several times - no luck

  2 reinstalled Outlook 2016 - no luck

  3. the module removed and reinstalled only - no luck

  Help please... step by step would be appreciated.

  Hi xinggirl45,

  Thanks for your question.  Can you elaborate a little bit and let us know exactly what does not work?  The resources below provide some troubleshooting steps basic to work with Outlook and iCloud for Windows.

  Get help using Outlook with iCloud for Windows

  Take care.

• When I go to get the modules (7.0.1), there is no evidence, except the info bubble "which are the modules. How to make this work?

  When I go to get the modules (7.0.1), there is no evidence, except the info bubble "which are the modules. How to make this work? The rest of the functions in this section seems to work. And I can get MY addons, but not the available modules.

  On the left side, click Extensions.

• How to pay Apple works with Uber?

  I have been in contact with Uber at least a dozen times already, and so far, looks like I spoke in Greek, because the assistance of Uber team doesn't seem to understand my questions.

  I initially signed with Uber without realizing the company caught pay Apple & I never put my account with my credit card information. I'm not happy to give Uber my credit card details, I've finally set up Apple pay on my iPhone 6s +. Only problem is that I don't know how Uber receives my payment with Apple pay because there is no contact/credit card machine that the driver has. For some reason any my pay Apple appears on my iPhone 6 s + as a valid payment, but not on my Uber account when I use my MacBook Pro. I'm confused.

  I'm trying to understand how exactly pay Apple work with Uber.

  I know I used my sister before Uber account and it wasn't a problem because she had a credit card at the Uber folder. So, I know that I can ask for a round. I don't know how the payment is received by Uber if I pay Apple on my iPhone and it is not on my account when I use my Mac.

  Could someone please explain how this works as I'm not exactly tech savvy. Also can I change the amount of the tip on my Uber account via my Mac even though I don't have a valid credit card? Also Uber really cool utility for Apple using Bill pay?

  If Uber wasn't the only company which operates at the international level I would have told them to delete my account... oh I tell them to delete my account, but support Uber team think answer them my questions.

  Help, please.

  You do not pay in the car, you pay with a 6/6 + / 6s / 6 s + when you book. No mention of the use of a Mac.

  

  

• How to control the speed of the fan on Satellite A660 - 11 M?

  Please any body know how to control the fan speed its always of 69% and making bad noise and the cpu use is 3% no to treatment high I try avancΘs power but still runing high speed

  Advanced power settings go to Toshiba power Saver saver > cooling method. There are minimum level. Change back to your power management for a second power plan, and the fan must be much quieter.

  I did it on my Satellite A660.
  Before changing PC Toshiba, health monitor showed CPU temperature 41% and the speed of the fan was 67%. After changing the method of cooling fan speed is 0%.