How to control the speed of the fan on Satellite A660 - 11 M?

Please any body know how to control the fan speed its always of 69% and making bad noise and the cpu use is 3% no to treatment high I try avancΘs power but still runing high speed

Advanced power settings go to Toshiba power Saver saver > cooling method. There are minimum level. Change back to your power management for a second power plan, and the fan must be much quieter.

I did it on my Satellite A660.
Before changing PC Toshiba, health monitor showed CPU temperature 41% and the speed of the fan was 67%. After changing the method of cooling fan speed is 0%.

Tags: Toshiba

Similar Questions

  • How to control the fan on Portege Z830?

    I have a Portege Z830 with BIOS version 1.7 and I am very upset by the noise of the fan.
    I was wondering if it is possible to control the fan noise, so I started to experiment with a little utility called SpeedFan. I put in place so that the fan will not turn on until the temperature of the processor exceeds a defined number. But it does not; It seems that the BIOS is ignorant these parameters.

    So my question is how can I set the fan to work my way?

    There are not many options to control the fan.

    The fan is controlled by the BIOS. The fan table that is stored in the BIOS contains information how a cooling module must operate.

    As mentioned by Liam, you can change the settings of power plant of Win 7 more battery as a way to minimize the performance of fans
    This should help a little...

    In other http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=65068 thread, I found a neat trick of the last user... He replaced Z830 fan with the fan of Z930 origin...
    It worked.

  • Control the fan on Satellite Pro 2100

    I used to see the analysis of the cpu temp with speedfan, I'd see when the temp (labeled local or remote or temp1, I don't remember.) Maybe 'local').
    reached 50 or 50 >, fan went.

    But I can't find that now. The fan still works ' cos I can activate it with speedfan saying speedfan set to 50% or more, then it lights.
    (less than 50% it is not lit, or at low speed - I think a constant - it is inaudible).

    I would like to know why the fan is not when the temperature reaches 50 > more... When the setting is...
    is there a program I can use to do?

    He finds...
    you know toshiba replaces the thing of power management with its own thing in toshiba power saver. Toshiba power saver thing had a framework...

    "Cooling method.
    and
    "Intel Speedstep Technology.

    Each is adjustable to the Performance, or optimized battery or something.

    More course set the method of 'performance' of cooling... If you say 'battery optimized' then I think that the processor gets hot enough.

    Whereas, for the technology intel speedstep... I do not remember that I put there, but I guess that optimized battery would make the CPU cooler.

    However, I noticed when changing the settings of the more advanced page of toshiba power saver setting processor speed to the lowest, it was extremely slow but still an idle at high temperature, about 50 I think, not so much if any difference there.

    I think it was less 0 charge, or charge of 0 to 10. I watch the load with notebook hardware control, speedfan and maybe other programs... However, only was necessary.

  • How to disable the fan completely - Satellite A10

    Hello

    I have an old laptop Toshiba A10. I use it because of the noisy fan. I would like to completely disable the or the fans. That will allow me to use the laptop on the lower CPU clock speed. I know that the fans are important for the cooling of the processor and hard drive. However, I'm not looking for advice or recommendations on how to limit or reduce the fan noise. To be clear, I want to completely disable the fans regardless of the consequences it may have for the laptop or any of its elements. Is it possible somehow to turn off the fans without opening the laptop and physically remove the fans...?

    Best for all
    Lanson

    RedHawk's right. There is no way to turn it off completely. It can be risky for the hardware of the laptop.
    I have old Satellite 1900 and fan is also strong enough. What you can do is to change the method of cooling in the Toshiba power settings.

    Put it in silent mode. I hope this helps a little.

  • How to enable the WLAN on Satellite A660-181?

    My wifi doesn't work. After a while my laptop was himself disabled wifi and now whenever I press Fn + f8 it says: Wireless Communication is disabled. Please activate the Wireless Communication switch.

    I tried to reinstal drivers for wifi but nothing has changed. I saw on the internet that some versions of HWsetup you can chose betwin the wireless market.
    I found no key on this laptop to turn on wifi so it seems to be a soft problem... Broadcom 802.11n and Realtec PCie controller family work very well.

    Can someone tell me how to solve this problem?

    Hi metalkorka,

    I think the problem is that you have removed Toshiba Value added Package because it the necessary tool for the FN keys. In addition, you should also Flash Cards Support utility.

    I have the Satellite A660 in front of me with Windows 7 and everything works great, I have problems. It s really great notebook and I like it a lot. I'm so happy with it.

    In your case I would reinstall these two tools of the official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Remove the old version of the utility of Flash Cards and VFR first and then restart your computer. I would also recommend CCleaner, which can fix and clean the registry of Windows running. A restart more and you can with installation of VAP and Flash Cards Support utility.

    Check this box!

  • How to access the recovery on Satellite A660 partition?

    Help please

    I am trying to access my partition recovery on my Satellite A660-18 and I could not find.
    I ve done a stupid thing I ve instaled a fresh Win7 to a cd from my friend without touching the hddrecovery partition. Now I have the new copy installed, but I want to go back to the factory one.

    It seems from what I ve read on the forums that win7 (being different then the one on the recovery partition) is instaled at present can no longer see the recovery partition (something was delleted when I ve instaled the copy of my friend.).

    is there something that I need to replace to start inside or is there a way to fix it?

    Thank you.

    > I ve instaled a fresh Win7 to a cd of my friend
    There is no way to start the installation of HARD drive recovery more after doing this.
    You have created DVDs of recovery following advice in the document s user manuals?
    If this is not the case, only way to still have factory settings is to order original Toshiba recovery disc. You can order it on https://backupmedia.toshiba.eu/landing.aspx

    I'm sorry. :(

  • Satellite P100 - 400 PSPA6A: How can I control the fan speed manually

    Good evening

    I would like to know how can I manually control the speed of the fan?
    I ask this question because my laptop rarely use the fan at a higher speed.

    Today, I listened to more than the normal fan, I have check the temperatures and the CPU was Core1:95ºC Core2:99ºC
    I'll clean the fan, but I want to know how can I manually control the fan (of course with the software: P)

    Kind regards.

    Hello

    I guess that the Toshiba Power Saver has been installed on your laptop and you use this software from Toshiba.

    If you are using Win XP and that the GST is installed, then you can check the configuration of basic settings and you might find the options to control CPU, CPU processing speed and method of cooling.

    If you are using Vista, then you should check the Vista Power Options:
    Check this thread how to manage Windows Vista power management features
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=38906&TSTART=0

    But in most cases, the cooling modules are controlled by fan that is stored in the BIOS table.

  • How can I change or control the fan speeds up my computer?

    my processor and motherboard run hot. the fan for processor speed is 20%, the other two are 30%. How to increase the fan speed to lower the temperature?

    I would not try to change the speed of the CPU fan. Clean the case out if its full of dust (if it's a desktop computer). If you can put more fans in the case, put more fans in it

  • Satellite M100 with Debian - how to control the power and the cooling fan on

    Hey,.

    I M100 and I installed debian, works very well, but there is a problem.
    Cooling fan turns on the top speed of all time. I m not shy on unix.
    How can I control cooling fan?
    How to control the power to the laptop?

    Hi mate,

    have you ever heard of the toshutils? I highly recommend trying these tools. Just google for toshutils and you'll find a few nice applications. Should usually be included in the distribution you have, also, I would check with 'apt - get search toshutils.

    See you soon

  • How to adjust the speed of the fan on Satellite L450D?

    My L450D has been making warm lately (~ 100) and I need to know how to change the fan speed enough desperately. I'm on the last BIOS v1.33 and still no change.
    SpeedFan simply doesn't work.

    Can I get help?

    Hello

    Mobile computers to control the cooling fan is quite limited and on Toshiba laptops, you have an option only. Enter power options advanced power profile that you use and you will find option methods of cooling options.
    Put please the optimized battery and it must reduce the speed of the cooling fan.

  • Satellite C660D - software to control the fan speed?

    Just brought a C660D. Someone knows the software to control the fan speed?

    My laptop CPU fan always turns to 74-80% of max speed. That's a lot of noise. I tried cpucool, but it did not work.

    If does not work, the fan speed will remain at the temperature of 0 with cpu at 38 oC. But with any operation tiny, like the click of the mouse, it will change again to 74%, CPU temperature does not change.

    Hi Polaralbatross,

    Have you ever tried the Eco mode that uses the cooling battery optimized method?

  • Need of utility to control the speed of the fan on Satellite A200

    Hello everyone, my Toshiba Satellite A200 1 GB brought 80º C on CPU, GPU and start making problems at this temperature, and I hear that the fan is not at its maximum when that happens.

    I have a cooler base for her but doesn´t work like I want.
    My question is if there is a program or a utility to control the fan speed. I I Don t want to set the lower clock speed, because I use it for HD games, just set up the fan.
    SpeedFan doesn´t recognize my CPU fan.

    Thank you!

    Have you checked for dust in the radiator?

    With the laptop off, use compressed air to blow the dust out of the heat sink. Spray the air into the unit where the Air goes out usually.

    If there is excessive dust accumulation, you may need to get an ASP to disassemble the laptop to remove dust properly, then refresh the thermal grease.

  • Satellite A200-1SC: which tool controls the fan?

    Hello

    I'm looking for a program that I can control the fan speed. Because my fan turns on all 10 dry:(sans charge cpu!)

    Or someone has a Bios more elders where the fan runs slower? My bios version is 1.70

    Hello

    I use the FanSpeed on my laptop Toshiba-No.
    But I don't think it will work on your A200.
    The fan table that is stored in the BIOS controls modules cooling and, therefore, it s unlikely that this tool is running.

  • Satellite L300 - how to clean the fan?

    Laptop seems to be overheating, but I do not know how to clean the fan or the weather, I can. Can you help me please xx

    Hi cottagecrafts,

    [HERE | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40] she s describes how to clean a Toshiba laptop cooling system.

  • How to control the output voltage?

    Good time after some time can get the output voltage, but this value is alwayscontinuous. How to control the voltage output through a Boolean? In

    in order to get this tension when I want to.

    Greetings.
    Hugo Santos

    Hi Hugo,.

    If you use a LabVIEW project, you must set the time of sampling in the properties of the node (see SamplingInterval.png). But this time to refresh the data should be high enough. If you take into account this update of time trying to control your way out.

    Kind regards

Maybe you are looking for

  • Obsolete spare HARD drive

    Hello I just sent in my iMac (mid 2010 model) store The Machines (Malaysia) for repair because I can't start the machine to load to the end, it freezes it with a white screen. After 5 days, the shop said that the HARD drive is faulty, but Apple does

  • Satellite Pro M40x: Keyboard issues

    Satellite Pro M40Z - failure keyboard developed in the sixth month, I bought the laptop. Any body facing similar problems with Satellite Pro European version?

  • How to remove adware and malware

    MacBook 2010 10.11.2 MacBook is slow and I suspect malware or adware

  • Downgrade from Windows 7 to XP

    Hi, I recently bought a new PC that has Windows 7 Home Premium installed. I would like to know if it is possible to do a simple downgrade to Windows XP Professional without the hassle of buying a new XP code or whatever it is in the same direction. I

  • tab ' FLMain 'in my menu START, what is it and why it will not open. " Win XP

    This tab with the image of a closed padlock appears periodically.Have had several calls of Support MS, they want to get AMMYY.exe, I think that yes they can get remote access to my computer?    I have some warnings in eventvwr?Mike