How access drive and failover work?

Similar Questions

• my external hd will not appear in my computer, it is in the device driver and says working ok

  my external hd will not appear in my computer.  It is in the device driver and work very well, and it shows in the hard drives and says working properly.      I turn it on then it is not in my pc so that I can usr it t / you rick * address email is removed from the privacy * or * address email is removed from the privacy *.

  Hello

  Check your drive in computer management. Click Start-> run, type &-> compmgmt.msc-> navigate to storage-> disk management.
  On the right side, make sure your external drive-> Rightclick and assign a drive letter.
  I hope this helps.

• I reinstall CS4 after failure of hard drive and everything works except Acrobat 9 Pro. I am running Yosemite. on iMac. I reinstalled Acrobat but when I open I only get Word to Acrobat in the finder without options and it does not open.

  I reinstall CS4 after failure of hard drive and everything works - photoshop, Indesign - EXCEPT Acrobat 9 Pro. I am running Yosemite on iMac. I reinstalled Acrobat from the disks, but when I open I get that Word to Acrobat in the finder without other menus - the application does not open. As a first step, I get an error message.

  Acrobat has detected there are missing components

  Adobe Pdf Finder

  Adobe PDF Viewer plug.

  What is the cause? If yes where can I get.

  I tried to uncheck the boxes, but no difference.

  Is this or an activation problem

  Thank you

  K
  

  Hi Kate,.

  Acrobat 9 is not supported on OS of Yosemite.

  You could face compatibility problems.

  Kind regards
  Rave

• I reinstall CS4 after failure of hard drive and everything works except Acrobat 9 Pro. I'm under El Capitan on MacbookPro. I reinstalled Acrobat but when I open I only get Word to Acrobat in the finder without options and it does not open.

  I reinstall the CS4 Master Collection after failure of the card logical and all work EXCEPT Acrobat 9 Pro. I'm under El Capitan on a Macbook Pro. The program worked with El Capitan until the logic board failure - I use it every day.  I reinstalled the entire Collection, but when I open I get that Word to Acrobat in the finder without other menus - the application does not open. As a first step, I get an error message.

  Acrobat has detected there are missing components

  Adobe Pdf Finder

  Adobe PDF Viewer plug.

  I tried to uncheck the boxes, but no difference.

  How can I get an operational program again? If Acrobat Pro 9 is no longer supported, how to get a version supported by software that works on my computer?

  Thank you.

  Thanks for the explanation. I actually have to install Acrobat and it now works. I downloaded and installed Adobe Reader XI (I think, http://ardownload.adobe.com/pub/adobe/reader/mac/11.x/11.0.02/en_US/AdbeRdr11002_en_US.dmg ) and opened the program. I noticed that after I opened the new drive, my Adobe Reader 9 program began to work. After that, I tried to open Acrobat and instead of getting the error 6 message that I had before, I had an error on a question of license that would require me to uninstall and reinstall the software. Once I did these steps my Adobe Acrobat 9 Pro started working! Don't know why my program, but it is fully functional again. I hope it helps someone else, I have why I came to answer.

• I enable sharing of external hard drive and it works. So when I got the pc power down is no longer share external hard drive. I have to reactivate every time sharing and reset the library wmp it becomes very old.

  Share an external hard drive for xbox. When computer I disable and re-enable sharing settings restore default to the external hard drive. When I re-enable sharing he does not always up to this I have reset the wmp library. I ran the fix nothing works computer center.

  Thank you guys for help. I actually already fixed it. I used to turn on sharing for just the hard drive and not the subfolders. I enabled sharing on the hard disk files and sub using the same exact settings and it seems that its fixed...

• Decommissioning of CPU on Tecra A8 - how change BIOS and fan work?

  I recently downgraded the processor in a Tecra A8 of a T7200 at a T2300 and the fan is now at full speed all the time. I am aware that I need to change the bios somehow to tell him that he is now using a different processor, does anyone know how to do this? If it requires a specific program, please provide a link, or let me know the name and I'm going to find a copy.

  Please don't give me the answer of stock that changing a processor is not possible. It + is + possible, although I understand that Toshiba would much rather have buy me a new laptop at home while they did intentionally what should be an exchange of relatively simple equipment to a real problem. There is really no good reason for why these laptops bios cannot adjust their profiles automatically cooling for the whole class of processors socket M.

  The TDP of a T2300 is 2 degrees lower than that of a T7200 so the cooling system of the laptop must face easily, infact it is A8 models out there that originally shipped with a T2300. All that I want to be able to do is swap processor with another compatible processor without the machine going mental, it's too much to ask of a piece (originally) quite expensive Kit.

  PS. Toshiba actually read and post on these forums or is it just fans?

  I assume you want to read what says Toshiba on Exchange of CPU in general:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  You are right. I also switched the CPU on my old Satellite M70.

  In any case, the document of Toshiba wrote:
  +.... It is unclear if the new processor is compatible to the system board. Integrated chipsets can take charge of their technical specifications a wide range of processors, but this does not mean that all types of CPU can be used in a mobile system, since cooling integrated systems have been designed individually for each series model to ensure the optimal operation of the machine... +.

• Qosmio G30 - a new CD/DVD drive is not working properly

  Hiya all

  I hope someone can help me. I had to replace my TS-L802A drive by another of the same model, except that when I replaced the drive I have problems to boot the CD and the laptop (Qosmio G30) rejects saying CD error at startup.

  I managed to install the operating system from a flash drive and it works great except for the side of cd rom of things. I have the flash player so that the laptop to recognize it? If yes how can I do to do that. I think the chipset for the optical drive is set as slave or something and not master.

  Help, please!

  Hello

  The readers of CD/DVD slimline for laptops are controlled by the firmware.
  The firmware controls the master/slave/c-selc settings.

  You need a player that is compatible with Qosmio G30.
  Your drive you bought may be compatible with a laptop, but if the settings are not compatible with Qosmio G30/bios of the controller, then, you wouldn't be able to use it

  There are no jumpers or anything else that could be changed as mentioned that he controlled by software

• I copied the photo library on external drive, and that one photo now shows despite the file being 70 GB.

  I had a library in iPhoto on an external HARD drive, and it worked. This is a disc plu so I decided to replace it with a new one that doesn't take much space on my desk. I copied the library through an external DRIVE to another drive, and it seemed to work. However, it now shows that a single photo despite being listed in the file manager as containing more than 70 GB.

  I explored a bit further in the file using finder and preview and found many files sorted by date. The photos seem to be all there, but they appear in iPhoto when I switched to this library. Always only one picture appears.

  I decided to convert the copied pictures from iPhoto library and it took a lot of time to convert, but the converted library always display just a single photo in Photos when I switch to this library.

  I could import all of them individually, but it's a big enough job, if there is a way to get libraries to work correctly.

  Any suggestions?

  We need the details - what format is the drive? How is it connected? It serves a TM backup Volume? How you copied the library itself? The library still works fine on the old drive? anything else you can tell us which could help a total strange who don't see you help?

  LN

• RAID DRIVE WILL NOT WORK IN THE MEDIA LINK BROWSER

  I have a RAID 5 drive connected to my MACPRO (MacPro5, 1), OSX 10.9.2. His work correctly on the BONE. In first Pro CC I can import files from it no problem, everything seems to go well until I try to link the media about him. The link media browser will not access it. I can see it, I can see the icon of RAID, but it will not access the files.

  Media link Explorer it will not appear on the list of the local drives on the left pane. When I double click on local hard disks, on the right pane, I can see the RAID HD icon, but when I click on it it won't open it. He knows its there, but can't access it. I don't understand. I can import files, etc., but not to link the files. I have to redo the entire sequence with the files of this RAID drive and its working days.

  I'd appreciate a lot of help with this problem.

  After moving all about the RAID I completely erased the disc.

  I reformatted it and moved all the data on it.

  Now, it seems to work.

  Not a good solution (because I do not know if the problem will resurface for a reason any)- but at least it's working.

  Here at least I know to test the new drive with the media browser before copying tons of data on it.

• XP audio driver does not work on a Satellite A100-02 b

  Hello

  I installed Windows XP on my Satellite A100-02 b.
  But the driver download from Toshiba Site does not work.
  Installation works without any errors, but Windows cannot find a soundcard and I hear nothing.

  Can you help me?

  Thank you
  Matze92

  Sorry, now it works.
  The problem is, which named XP map his "PCI Device". Now, I installed the driver and it works!

• Windows 7 Professional... How to get access to security to view my external hard drives and external flash dirves

  I am a first time user to windows 7 Professional and need to learn how to access files that are connected to the computer by an external flash drive or an external hard drive.

  External or external flash drives hard drives can be connected to windows 8 computers or windows xp to view the files, but when then identical external or external flash drives hard drives are connected to two computers with windows 7 Professional there are settings automatically don ot all access to the external hard drive or flash drive external files.

  When the computer display, it displays the external hard drive.

  When I left click top produces a pop up with the title bar: location is not available

  Content: H: | is not accessible.

  Access is denied.

  When I right click on the hard drive and then click the Security tab, it displays:

  Name of the object: H: |

  To continue, you must be an administrative user with permission to view this object's security properties.

  Do you want to continue?

  Then I clicked on continue and it displays:

  Owner

  You do not have permission to view this object's security properties.  To view its security properties, you can try to take possession of the object.  As owner, you can also control who gets the permissions on the object.  Please note that once you take possession, the previous owner may not have access to the object.

  To try to take possession of the object, select an account from the list, and then click OK.

  Name of the object: H: |

  Current owner: unable to display current owner.

  Change in ownership to:

  the two choices are my name or administrators

  I then chose an and apply and ok and it did not work.

  I then chose the other and apply and ok and it did not work.

  Then I clicked on other users or groups and entered everyone and that no longer works.

  I am the only user of this computer brand new.

  When I click on accounts Panel then user control and security for the family and then user accounts, it displays my name as administrator password.

  What are the steps that I can buy an external hard drive or buy a flash drive or use the ones I already have and use them with this computer which has windows 7 Professional?

  How is the switch of the property did not work?

  I went back to safety again and this time stayed at the bottom for special permissions or advanced settings.

  And yet when I kept getting location is not available

  H:\ is not accessible.

  Access is denied.

  How do change you windows 7 Professional so that you can have access to your own files on an external hard drive or an external flash drive.

  Please list the steps.

  Thank you

  This problem has been resolved in collaboration with support of higher HP for Z book 17 mobile workstation.

  Steps:

  (1) determines that it is not NTFS problem

  (2) using the MSCONFIG the problem has been isolated to a single service

  When this service has been disabled and after reboot, the problem of access to the files is resolved.

  Results: HP had installed software on the HP Z book 17 laptop or mobile workstation which, by default, block communication with external hard drives and flash drives external.

  This HP Client Security software replaces or blocks all right click changes settings become apparent.  It blocks the change of ownership.  It blocks the administrator privileges.  It blocks all is used.

  The HP Client Security software has been changed and changed to deny privileges (default setting) to allow the communication with external drives.  When you go into the setting for this software, it is now a humming noise and maybe I need to download the drivers and software again to see if this problem is also corrected.

  Thanks for your comments.  I spent a lot of time on this and didn't understand why all right-click methods had failed.  The default software setting HP deny had trumped right click all changes.

• How to install Win7 on new hard drive and still access all the files from the hard drives of previous Vista?

  I currently have a Windows Vista PC. It has two SATA drives, one with the operating system, the one I use for storage.

  I want to buy a new SATA hard drive and install a new copy of Windows 7 top.

  I want to know the steps to follow to do this. My plan is this:

  1. turn the pc power off and open the case.

  2. remove the old hard disks

  3. plug the new empty hard drive

  4. turn on the pc and the insertion of the disc to install to Win7 for DVD-ROM drive

  5. enter in the bios and put the DVD-ROM as first boot device

  6. install win 7 on new hard drive.

  Is this correct?

  Because my next question is important:

  7. Turning off the computer.

  8 reconnect the two old hard drives. New total number of SATA drives connected = three.

  Now when I restart the PC and login to Win 7, it lists two other drives as, for example, D:\ and E:\ readers?

  How can I make this work?

  Thank you very much!

  Thanks for your reply, but I don't want to dual boot. I just want to have the hard drive as the master drive Windows7 and the old two drives as slaves, where I can access files as the pictures and letters.

  Any help would be appreciated!

  Well, I would disconnect all drives hard current interns, then connect the new hard drive, reinstall Windows 7, re - attach the old readers as slaves and copy all the data you need to on the disc of Windows 7.

  See:

  How connect a SATA Hard Disk as a slave . eHow.com
  Single, master and slave drives and Jumpering

• My cd/dvd drive no longer works and is not rognized by my computer anymore. How can I reinstall?

  My cd/dvd driver is no longer recognized by Windows XP when I try to play a cd or movie, or try burning anything I get no response from the unit at all.  I tried a system restore but it did not work.  I see the instructions on the internet on how to uninstall and reinstall, but it seems that the device driver is just went and I don't know how to recover or reinstall.  I'm on a laptop HP Pavilion entertainment with Windws XP.  Any help would be appreciated.

  Thank you

  Hello
  1 - do you mean that the CD/DVD drive does not appear in Device Manager and windows Explorer?
  2 did you recent hardware or software changes to your computer before this problem?

  You can try the tool Fixit of the article below and check if that helps.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  You may be interested to have a look at the article below.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641

• NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

  NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

  Message that appears is: -.

  Windows has stopped this device because it has reported problems. (Code 43)

  BB

  Install the latest driver from nVIDIA:

  http://www.nvidia.com/object/Win7-WinVista-32bit-260.99-WHQL-driver.html

  http://www.nvidia.com/object/Win7-WinVista-64bit-260.99-WHQL-driver.html

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How to access a hard drive belonging to another computer, I have a bunch of hard drives and before you format it to use it again, I would like to see what is their. Thank you maldog

  How to access a hard drive belonging to another computer, I have a bunch of hard drives and before you format it to use it again, I would like to see what is their. Thank you maldog

  The easiest way is to use a USB to SATA or IDE USB adapter. (most of the adapters offer both).

  Here is an example
  http://www.Newegg.com/product/product.aspx?item=N82E16812232002