Similar Questions

• Cannot install audio maxx using Vista 64 bit on Qosmio F50

  Hello

  I just did a clean install of Vista x 64 and installed the audio drivers Realtek from Toshiba.
  The problem is that the Maxx-audio plugins do not appear in the Realtek Control Panel and do not work, even though I see a MaxxAudioAPO20.dll in the System32 folder.

  Any ideas?

  Thank you.

  Hey Buddy,

  For me it looks like there is something wrong with the order of installation as well as drivers have you already installed? Normally the driver chipset and Windows updates must be installed first and then the audio driver. All you can download on the European driver of Toshiba download page.

  I used the following installation order:
  -Windows Vista 64-bit
  -Service Pack 2 for Vista
  -Chipset driver
  -Display driver
  -Sound driver
  Driver LAN-
  -WLAN driver
  -etc.

• Meeting place for Dell 8 Pro + Windows 10 + No Sound Drivers OK

  Does anyone else have a problem with their coming 8 Pro?  I have upgraded to Windows 10 and everything seemed fine, then a few days ago the sound has stopped working.  The sound icon had a red in the taskbar as if 'X' cut and I couldn't turn on the sound.  The scroll bar does not, even on the physical switches.

  I unloaded the driver and rebooted and it seemed to accept and had no errors in Device Manager (I tried both later and regressed to a previous version of the driver... no luck).  The slider bar has worked and it was reactivated without doubt.  I did a test in the sound setting menu, and he reported that he was unable to play.

  So I did a factory restore Dell Windows 8 and the sound is back.  So good, it was not a hardware problem.  But we have all found their fair will stop working on Windows 10 (worked great for a few months now)?  I don't have my heart set to level my meeting place for 8 to 10 Windows because everything I do on this machine is to surf the web, but I think it will be a possibility.

  This true isn´t at all. I found a workaround. I downloaded the Dell booth 8.1 Windows

  

  then I went to the Device Manager and clicked on both devices under "Audio - video - and Gamecontroller" the names of these two devices are 'Intel ESS Audio Device (WDM) and "IS2 Realtek Audio Codec".

  

  Do right click go to properties and chose to update the drivers

  

  Choose "desktop search".

  Choose "from the list.

  Choose "install device".

  

  

  Now search for Drivers for Win 8.1 in the cabin - you should probably remove it with software like 7zip

  '5830-win8.1-A06-KY92D.CAB\5830\win8.1\x86\chipset\PKVD4_A05-00\Drivers\Audio\ '.

  Here you can find the files INF. choose them, install it and restart your computer. Do the same for devices stand in Manager.

  After that, you can see two drivers if by clicking on choose in the list as in the screen above. Ensure that you have chosen the one of 22.11.2013.

  Now you should make it sound now, from time to time, it is necessary to reinstall the 2013, but it works fine for me now.

  In constance. His important force windows to use this old pilot, only try to install a new and chose that an older version causes windows always using the new driver for windows 10.

• Meeting place for DELL Pro 8 - option missing sleep after updated

  I own a DELL Pro 8 meeting place. After updating drivers, the tablet will not sleep and pressing the power button is no longer in the Tablet 'SLEEP' mode.  SLEEP option is completely missing the Tablet remains on constantly even when not used.

  The updates that I applied are

  Pilot series Intel Atom Z3000

  Running reliable engine Driver Intel

  5570 WWAN and GNSS (GPS) Driver Wireless Dell Mobile Broadband

  I've found a workaround.

  I found that disable driver Wirless 5570 Mobile broadband device Windows re-activates the SLEEP feature Manager.  This would indicate that the problem is with the driver 5570 Wireless.  I tried to downgrade to a previous version of this driver, but Mobile broadband will completely stop working.

  I suppose that others have the same problem, if you have not applied the latest updates and a meeting place for Dell Pro 8 with a card 3G it would be a good idea to not update drivers at this time.

  In the end, I updated the Windows operating system files and installed A03.  Could not get A04 or A05 works not at all.

  It is clear that these updates have not been tested on the site of Dell Pro 8.  I highly recommend to avoid updating the driver for the card 3G until an adjustment for the driver of the object is released.

  The reality is that Dell has released a product with a digital pen that does not work properly and use a 3G card that does not work properly.  In general I would avoid Dell Windows tablets in the future, if you do not have to use Windows 8.1 I would recommend that you buy an Apple iPad.

  The iPad is a fantastic table.

• Keyboard problem trip 11 7140 Pro place

  Hello. I have a 11 7140 pro place and have recently added travel keyboard.

  I found a problem but I hope for more help with.

  When I plug the tablet on the keyboard the power LED flashes white once then 4 short orange blinks then repeats indefinitely. Check the power meter app also shows battery 2 as long as it does not exist.

  I can use the mouse and the keyboard, but nothing I do seems to help with the problem of flashing. When I connect the tablet to the AC charger with the connected keyboard the light just flashes orange. I tried also to separately load the keyboard using the adapter directly connected to its port micro-USB for about 6 hours and it made no difference.

  Any help on what could be the problem and means flashing is appreciated.

  Darren.

  OK, happy to say that I myself have resolved.

  I consulted my Bios 7140 and saw that Bios has recognized the two current batteries, even if the Windows OS 10 doesn't have. He showed both the Tablet battery & battery (i.e. mobile keyboard battery) charge. under the 23W power adapter. If the Bios recognizes clearly a second battery.

  I changed all the power & battery settings (for example of Adaptive load, power on the cover, etc.) that I could find to another value.

  I rebooted the unit and re-entered Bios together as all the settings back to what they were originally.

  Re-startup in Windows 10, now battery recognisees the two 7140 & the battery slice in the mobile keyboard. It's also fresh & uses two batteries.

  QED.

• Venue Pro 11 (7140) 64 bit Win 8.1 - Audio volume

  Playing music from YouTube with the browser Tablet volume controls and the Max value, through the Tablet 1W speakers is clear, but the volume level is not optimal. The same is true when listening with head-phones is plugged. Memory, a few webcasts (product launch of MS for example recent) may have low volume levels available, and so with the tablet at maximum volume, these emissions could be difficult to follow.

  When I connect the Tablet taken head-phone to an external sound system, the latter also the Max value, the noise level is not much better.

  Is the maximum volume of the room 11 Pro 7140 (internal speakers and head phone port) is limited by design?

  However, when I connect the tablet to a TV via an HDMI cable, the audio level of the TV is sufficient such that I can have the TV set at the level volume normal, or even turn it upward due to a level very hard! This suggests that the noise level in the HDMI cable is superior to the helmet of the tablet.

  I also have the Dell docking station, and at the level of the headphone port is is not better than the tablet itself.

  If there is no solution through a setting within the Tablet, it is perhaps possible to buy a USB2/3 device for the tablet that will give me an output signal line to the external sound system, to a level higher than that available from the helmet of the tablet.

  Any thoughts?

  JasKITS

  Hi Brian,.

  Thanks for your reply.

  Solve the problem itself, and I now get a sufficient signal to drive the external audio system, the head-phone jack or the 7140, or the docking station, such that I don't need to adjust the maximum volume.

  I don't know how it is resolved itself (maybe finger hurt), but I noticed as I now get a Dell Audio / Maxx Audio 3 pop up when the connection head-phones or the external audio system, asking "what plug in camera?

  If the volume of the internal speaker (max value) is too low or not is debatable, but more a high-volume internal speakers probably would not be desirable in business scenarios for which the 7140 has been designed.

  Thank you, James (Chichester, United Kingdom)

  We are quite limited in what we can achieve for a maximum volume and a tone due to the limited size of the device.   I'm glad that the issue is resolved on its own.

• Lost power 'high performance' profile on the meeting place 8 pro

  I only see the option 'Balanced '. I remember when I had first tablet, I had two options... one for balanced and another for performance.

  How can I return these options? At the very least, that someone can point out their profile for their meeting places 8 pro settings?

  Also, I see no popup 'low battery'... the tablet will shut down without any warning when the battery is low.
  Thanks in advance.

  That has something to do with the sleep settings connected / configuration Dell made on these units. It is the same for versions place 11 MS Pro. units of vPro are different because no standby connected supports.
  If you turn off the connected Eve all Windows power plans are displayed and all the advanced features of power are available.

  Use the command Regedit and change the following:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power
  Change the value for the key CsEnabled from 1 to 0 and reboot.

  1 means connected off standby active and 0.
  Try it and see if it solves your problem.

  BTW: by disabling the connected standby battery also will show the time remaining not only the percentage of battery life. :-)

• meeting place for Dell 3845 pro 8 screens stays on when stop and reload.

  My dell screen pro 8 place stays lit when the unit is plugged in and charging when the charging is completed, the screen turns off. is this normal?

  herrmant

  My dell screen pro 8 place stays lit when the unit is plugged in and charging when the charging is completed, the screen turns off. is this normal?

  # It is not normal, but I don't know why it's happening.

• Satellite Pro P300 - impossible to activate the built-in microphone

  I bought a Satellite Pro P300 some 2 months and so far so good.

  It has a webcam which I really thought that I would have any use for it but now find that I have.

  The camera works fine but I cannot activate the built-in microphone.

  Can someone point me in the right direction please

  Hello

  You will need to start the webcam software if you want to use the internal microphone too.
  The point is that the internal MIC is connected with the internal webcam and webcam software handles both devices.
  Also check if the internal mic has been correctly enabled in the webcamsoftware

  In addition, I would recommend updating the audio driver.

  Best regards

• Meeting place 8.0 - disable and reactivate the Participant in particular

  Hello

  I'm meeting place 8.0 Application Server (Express Media Server) installation and Web Server 8.0

  Problem is when presiding officer (host), who is planning a meeting, can't cut / activate the other participants (particularly) in the same session (Act as a moderator).

  Now, if we provide privilege assigned to the host, we get these rights to Mute and activate the microphone of this meeting and any other meetings running (which is a problem).

  Can we have a meeting of the President with Mute / Unmute access (particularly) for the meeting, which was hosted by him.

  Please provide some valuable contributions on the same.

  Thank you best regards &,.

  Ashish Bagla

  Hi Ashish,

  If you have the single MeetingPlace Audio, of the telephone user interface solution there is no possible way to mute individual participants. You, as the host, can cut only all participants, and then each participant can be reactivated if they mean something.

  The only other alternative is to use the Conference Manager. However, to be able to use this tool, the user/host must be either standard or system administrator user type.

  More on the conference manager you can find here:

  1. how to install the Manager of the Conference:

  http://docwiki.Cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Installing_MeetingPlace_Conference_Manager

  2. how to use the Conference Manager:

  http://docwiki.Cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Using_MeetingPlace_Conference_Manager

  I hope this will help.

  -Dejan

• OS Sierra: Cannot play audio via bluetooth are involved during airtime

  Cannot play audio via bluetooth speakers during airtime to my TV.

  Has been able to do before the OS Sierra update. Now if I switch to my bluetooth receiver in the system prefs-> sound-> menu "exit" it disconnects completely airplay. This happens both with mirroring and use as a separate display.

  Is there something that I am missing on the behavior of this feature? Or is this a bug in the new OS?

  Mac OS Sierra worm 10.12

  MacBook Pro (13 inch, early 2011)

  I have a similar question, with the siera update I can no longer audio to my bluetooth headset output, they are connected but do not appear in the list of audio output. :///

• Equium L40 - 10z PSL41E - cannot install audio driver WinXP

  Hello!

  I'm having a problem with the installation of the Windows XP sound card drivers

  Computer laptop informatio, Toshiba Equium L40 - 10z (bought from PC World) PSL41e
  2 GB Ram DDR2 - 667 Mhz
  Core 2 [email protected]
  120 GB hard drive
  Intel GMA 945 graphics card with shared memory

  I can't find drivers for my laptop, the specification is indicated above. I have windows XP with service pack 3 installed and the system is unable to install drivers Realtek High Defination or audio drivers Realtek AC 97 ". I even tried the latest drivers version 1.86 but not its use.

  I read the other posts on this forum and have tried the other model audio drivers as well, it seems that after running the installer from several other realtek audio drivers for windows XP THAT is of no use. I even tried to add material manually through the Device Manager and have to install these drivers for realtek high definition audio and the realtek ac 97 audio drivers.

  Of course, this helps the drivers to install, but windows cannot activate the material with an error code 10 with a note of explanation on behalf of the driver in Device Manager.

  I also tried to install the drivers of toshiba A100/A200 without exploitation, however, I read somewhere that there is a windows XP patch that is required to be installed, so that windows detect the chip high definition, which is on the motherboard. If one can provide a direct link to a driver with the .inf file that will have the information for the material, or if someone can advise (or provide a link for) according to microsoft update is required for windows XP, in the appropriate hardware detection, will be really useful.

  I'm also sorry for my bad English I'm unable to articulate with the type of problem, I faced. But if anyone knows of a solution and additional information is needed, I will be happy to provide you with everything I know.

  I'll be very grateful to anyone who helps address this issue. Looking forward to a positive response :).

  > have windows XP with service pack 3 installed
  To my knowledge, that the XP SP3 is not published official. Only a beta version is available.
  Then go back to SP2!

  > the system cannot install drivers Realtek High Defination or Realtek AC' 97 audio drivers
  Realtek AC 97 audio driver is not compatible! You must use the driver from Realtek High definition.

  > Of course, it helps the drivers to install, but windows cannot activate the material with an error code 10 with a note of explanation on behalf of the driver in Device Manager.

  The problem is that you have not installed the MS XP patches that are necessary to get the sound working.
  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=59&ThreadId=25916

  You need the KB888111 and KB835221 hotfix

  Good luck

• Venue 11 7140 pro micro HDMI does not work after upgrade windows 10

  Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.

  I have thus display driver problems on 10 to win.

  For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.

  The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.

  I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.

  It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.

• Hi, could you please answer question in terms of meeting place?

  Hi, I work in service of meeting place, I got very confused these 2 question:

  (1) in a real Conference senario, each audio stream of a participant must go to blade Audio (Media server) to mix. If so, then we have the conference voice gateway resource what is it for?  I mean no use voice gateway DSP farm set up a conference?

  (2) in version V7, each audio blade has 250 ports session (G711 audio codec only), and for example, we have 2 blades, then it means that all the participants of the meeting at the same time must be not more than 500?

  (3) the mode of operation of blade audiao, in a shared pool? or other self-locking?

  Thanks in advance!

  Hi Lin,

  Let me answer your questions:

  1. in version 7.x, you use the MCU hardware blades (Audio or video or both) for your audio/video conferences. When you schedule a meeting, this meeting is held on this MCU and you use resouces about this MCU depending on the type of meeting that you have planned (Audio or video or both).

  DSP resources are more for transcoding in this case and not for the Conference.

  2-1 port, 1 user (1 session audio) then Yes you can max 500 participants in a single conference.

  3. When you schedule a meeting you are reserving the resouces on your MCU so you are limited to what is available.

  HTH

  Arun

• Cannot activate Windows 8 (error: 0xC004C003)

  I have the product key Windows 8 Pro
  and when I try to activate a key
  There show a 0xC004C003 error
  like this "error: 0xC004C003 the activation server determined the specified product key is blocked"
  Please help me...
  I had to use this key perfectly until I re - install Windows and cannot activate a key.

  How to activate Windows 8 by phone
   
  Press the Windows key + X and then click Run, and then type: slui.exe 4

  Then press the ENTER"" key.
   
  Select your "country" in the list.
   
  Choose the option "activate phone".
   
  Stay on the phone * do not select/press any option * and wait for a person to help you.
   
  Clearly state your problem to the support person.

  ======================================================

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Windows activation (United States only): (888) 571-2048

  J W Stuart: http://www.pagestart.com