How can I activate my network access protection

Similar Questions

• How can I activate the network between my guests on merger 4.1?

  Hello

  I just started with VMware Fusion 4.1 and I want to create a local network for testing. On VMware workstation, it is pretty easy to do, but on the merger, it will not allow the traffic between my guests.

  I have 2 linux guests running, both with ssh service active and upward. I can ping each of them and also the Lion OS guests but I can't ssh to one guest to another, he said that there is no route to the host. I can ssh to OS Lion for guests.

  Do anyone knows how I can activate more ICMP traffic between guests?

  Thanks in advance,

  Will be

  Well first of all let me say that I have no problem making a ssh session between host comments, comments to the host and or guest invited on Mac OS X Lion and VMware Fusion 4.1.1.  So I would say that you do not have something properly configured and if you use Fedora, the first thing I do is the firewall and disable SELinux, at least for the connectivity test, then go from there.

• How can I activate on the network access Protection?

  Windows 8 may depend on network access Protection.  How can I?   How to find the answer to this question.   I see that a lot of people have the same question, but I do not see a single response.  I see that they have received a response, but can't find the answer.

  Its a Windows Service.    Control Panel / Administrative Tools / Services - and scroll down to the network access Protection Agent.       If you set it to automatic, it will run at startup every time.    You can read its description.

• Can I network access Protection for a home network? How do activate you it?

  Network access protection - how do I turn it on?

  Network access protection is not available in a home network.  It requires a server computer that is running Windows Server 2008 .

• How can I activate "Network Access Protection"? Action Center reads "Agent Service does not work"

  Control Panel > security system > Action Center > Security...                                                 NETWORK ACCESS PROTECTION STOP scrolling to the bottom of the list...                                                                                       Network access protection agent service is not running

  Hello

  Please write in the Microsoft Community Forums.

  I see that you are not able to turn on the "Network Access Protection" , you get an error message "Agent Service is not running".

  Maybe it's because the service related to network access Protection must be disabled.

  It would be more useful, if you answer this question:

  Your computer is connected to the domain network?

  I recommend you follow the steps to enable the network access Protection.

  a. click the Start button.

  b. Type "services.msc" in search programs and files and press ENTER.

  c. right-click Network Access Protection and start the services.

  d. choose Start from the context menu.

  After you start the services try to enable the network access Protection.

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• How to enable the network access Protection?

  How can I activate on the network access Protection, he tells me it's off and that it must be manufactured on. So please can you me how to enable Network Access Protection?

  You don't need to turn it on. Network access protection is a feature that for use in business and companies to make sure that only clients which are safe and meet certain security requirements could access the network location. It is something that will be in service by admin in a company if wanted.

  If your PC is part of the domain network and it is part of the company contact your admin to ask if this feature is applicable. Otherwise, don't need to worry about this. This is just to inform you about the status of the PAN and you don't need to do anything.

• In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service. Ditto for "file sharing." How can I activate them?

  In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service.  Ditto for "file sharing."  How can I activate them?

  Hello

  Method 1: Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• How can I change the "network protection" off to on?

  How can I change the "network protection" off to on?

  If you ask about network access Protection, see this:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-to-turn-on-network-access-protection/7daeddb9-f652-4fac-a3bc-e1234c928add

• How can I unlock my network router so that I can access my Kindle? I don't remember even enter a password.

  How can I unlock my network router so that I can access my Kindle? I don't remember even enter a password.

  Hello mikebradburn

  Do you mean that you need the network key to connect your Kindle If Yes, then you need to get the key from the router. Regarding setting up the kindle to connect to the network, follow the procedures below.
  http://www.Amazon.com/GP/help/customer/display.html?nodeID=200505540
  To remove security and unlock your router, you will need to contact the manufacture of the router.

• Using Windows XP with an access switched. How can I stop the network Dialer to invite the user connect even if I checked never dial a connection in Control Panel, then apply, then OK?

  Using Windows XP with an access switched. How can I prevent the network Dialer to invite the user connect even if I checked: never establish a connection to the Control Panel, then apply, then OK? She comes right back in a few minutes for: always connect by default. Help! Control panel Connections tab doesn't really seem to apply my change to never establish a connection right back to always make the default connection. What else is there to do?

  Hi Richard,

  You did it all change hardware or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  Network connections and remote access troubleshooting

  Hope the helps of information.

• network access protection is disabled, how do you turn.

  network access protection is disabled, how do you turn.

  Network access protection is not available in a home network.  It requires a network with a server computer that is running Windows Server 2008. Boulder computer Maven
  Most Microsoft Valuable Professional

• How can I activate Creative Suite 3 on my computer if I don't have access to the previous computer, in that it has been installed?

  How can I activate Creative Suite 3 on my computer if I don't have access to the previous computer, in that it has been installed?

  When you have a non-functional computer and cannot turn it off, click on the link below

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

• My old PC crashed and I recently bought a new PC.  However, I can't seem to activate my Photoshop CS2 on my new computer that I need to find a way to deactivare my old computer crashed.  How can I disable without having access to my old computer?

  My old PC crashed and I recently bought a new PC.  However, I can't seem to activate my Photoshop CS2 on my new computer that I need to find a way to deactivare my old computer crashed.  How can I disable without having access to my old computer?

  You will not be able to activate the Photoshop CS2 you have on your drive.  Adobe closed the activation servers.

  You can, however, download the Photoshop package from the following Adobe page.  Follow the specific instructions provided here and remember that you can not use your original serial number.

  Error: Unavailable activation server | CS2, Acrobat 7, pass a hearing 3

  -Christmas

• How can I activate internet access EBS

  Dear all,
  
  Sorry if this has been raised before. I try to search but I have not found.
  
  my query is how can I activate or open the EBS application to be accessible from the internet?
  many course taking account of safety, since the apps of the EBS and DB server in our internal LAN area.
  What is the best architecture to enable this in the internet?
  
  is there a reference that I can learn to.
  
  Thank you
  Robert Siregar

  Hi Robert,.

  Sorry if this has been raised before. I try to search but I have not found.

  Please see this link - https://forums.oracle.com/forums/search.jspa?threadID=&q=Access+AND+Internet&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

  my query is how can I activate or open the EBS application to be accessible from the internet?
  many course taking account of safety, since the apps of the EBS and DB server in our internal LAN area.
  What is the best architecture to enable this in the internet?

  is there a reference that I can learn to.

  You have two options:

  (1) unsecured: using the actual IP address and this way, that no additional configuration is required unless you need to purge the FND_NODES table and fills again again.

  How to clean non-existent nodes and IP addresses ranging from FND_NODES [ID 260887.1]
  How to get a clean auto-configuration environment? [391406.1 ID]

  (2) course: using DMZ, but it will require configuration/configuration / hardware.

  Additional configuration and deployment in version 1 Options
  https://blogs.Oracle.com/stevenChan/entry/additional_configuration_and_d

  Troubleshooting configurations DMZ for Apps
  https://blogs.Oracle.com/stevenChan/entry/troubleshooting_dmz_setups_for

  What does "DMZ Certification"?
  https://blogs.Oracle.com/stevenChan/entry/what_does_dmz_certification_me

  Depth: Demilitarized zone and E-Business Suite
  https://blogs.Oracle.com/stevenChan/entry/indepth_demilitarized_zones_an

  DMZ Application Security
  https://blogs.Oracle.com/muralins/entry/securing_dmz_application

  Applications that run across a firewall
  https://blogs.Oracle.com/Millmore/entry/applications_running_through_a

  Thank you
  Hussein

• How can I activate my disabled iphone 4s, which is locked with access code I have khow.

  Hi you

  My iPhone 4S has been abandoned and the screen has been damaged. I tried several times my password in the screen of blined in vain. After 15 days, I repaired my screen and found that it is disabled.

  I tried with iTunes but failed.

  How can I activate my iPhone 4S.

  Tawfiq

  Bangladesh.

  See If you have forgotten the password for your iPhone, iPad, or iPod touch or your device is disabled - Apple supports

  You will need to follow the steps under "erase your device with the recovery mode" to restore like new.  You can then restore your backup.