How can I connect a Time Capsule directly to my new MacBook Pro? I could connect my old MacBookPro directly via Ethernet cable, but there is no Ethernet port on the new MacBook Pro retina.

Similar Questions

• How can I use my time capsule as a hard drive on an existing network accessed through a password

  How can I use my time capsule as a hard drive on an existing network, storage, accessed through a password?

  We need more information in order to provide the right solution and Setup for you.

  You already have another router Apple... as an AirPort Extreme or Airport Express that provides the signal of your wireless network?

  If not, what is the serial number and model of your modem?

  Finally, what operating system is installed on the device you will use to install and configure the time Capsule? If it's a Mac and you're not sure what operating system it uses... click on the Apple icon in the upper left corner of the screen, then click on about this Mac, and post back with number of Version of OS X that you see there.

• How can I remove a time Capsule backups I want to recycle?

  How can I remove a time Capsule backups I want to recycle?

  Reformat the disk via disk utility. This will remove all the contents of the disc.

• How can I connect my printer to work on a cable

  I use vista on my laptop at home a WiFi printer.  How can I connect my printer to work on a cable.  When the printer does not recognize the printer cable an impression has been sent.  All the drivers are up to date.

  Check here

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

• How can I restore my time capsule documents folder?

  I use an iMac OS X El Capitan and support up to a Time Capsule airport running.

  One of our user accounts on the iMac ran into problems w access to the apple of the user ID (could not access iCloud preferences, etc.) before doing a clean reinstall of the OS X software, so I opted to try to remove the problematic user account (another account has no problems) and then configure a new user account. It seems (the jury is still pending on that) have toured and account is running normally.

  My question now is to restore a subset of the records of the time Machine to the specific user. Is it possible and if yes, can you give me instructions on how to do?

  Thanks in advance.

  Migration wizard does not have the granularity you need. It is simply not possible to choose more great lines.

  So, you'll need to do it via the standard recovery... method that looks like you have never used.

  This is the basic method of use Time Machine, you will need to learn how do.

  TM open via icon in the dock. If this isn't in the dock it from applications.

  All you have to do is open TM...

  Go to the date when the user has always existed.

  Now in the finder as the interface.

  Go to the user that you want to restore... I suggest that you actually just take the folder of any user.

  Sorry I can't take screenshots inside the TM... so if this is not clear look at a standard youtube video, of which there are hundreds.

  It's the old version... but it is clear and well spoken.

  https://www.YouTube.com/watch?v=6bcf54aRBPk

  Restore now all the folder to somewhere else... maybe not even on your hard drive, but on a USB key or a convenient place.

  Once the entire restored user to a location, you can then choose say all the documents in the documents folder and copy it directly to the new user that you created, file documents... same thing for music, even for photos etc... the actual application should always be connected libraries... which will make you within itunes or photos, etc..

  Our great master guru on this stuff is Pondini, who died some time ago... and it is a few obsolete versions... but it is always interesting to read.

  About the use of configuration and migrate...

  http://pondini.org/TM/home.html

  The real using TM

  http://pondini.org/TM/FAQ.html

  The restoration is Q14-17 and fairly detailed.

  I made an example using method pondini... just iphoto, but gives a good idea how do...

  Cannot access old files on time capsule

  If you want to just retrieve the documents folder say... Then, you can use the same method... Simply select the entire folder.

  The permissions problems arise often... but once the files on your local disk, you can correct them.

• How can I unforget airport Time Capsule?

  I was in the Airport utility and 'forgotten' my Time Capsule airport.  The most convenient airport seems to work very well, but I can see it is no longer in the graphical presentation.  How can I fix so that I see once more the airport?

  Try a cycle of complete nutrition of the network as follows:

  Power off all devices... modem, routers, computers, iPhones, printers, etc. in the order you want

  Wait a minute

  Start the modem and let it run alone for a few minutes

  The device connected to the modem to start and keep running a minute

  Keep the commissioning of the devices at once a minute outside until the entire network is back

  Check if the airport appears now and communicate your results.

  IF... the airport does not appear in the utility AirPort... are you still using OS X (10.7.4) on your Mac, you put in your profile, or you have updated to a more recent operating system?  If so, what system would be that?

• How can I configure my Time Capsule (its predecessor) as an extension of WIFI network?

  I have the previous model of the time Capsule and a new version and two MAC computers. I want to use the Capsule of ancient times to extend my WIFI network. I have a MAC with a new current version of time Capsule in the center of my house. I have a second MAC set up with an earlier version of a time Capsule in my office. I want to expand the network from the center of my home, further, beyond my office. Anyone know what I need to do? THX!

  Place the old TC in the same room as each other.

  Do a factory reset.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  Open airport on the Mac utility and configure the old TC... it will automagically want to extend wireless.

  Complete the installation, then move the TC to a suitable place where it picks up good signal from the main TC. There is no need to a position of bad signal... then place it where the speed is close to full... but then covers your current area of dark (wifi not light).

  Fact... Voila... easy as pie.

• How can I connect two router WRT610N wireless via a modem

  My problem is that

  I want to connect a "wrt610n router" to moden directly cable yet and when I conect the two of them everything works fine and ITI gives good internet connection via WLAN

  Modem ip - 192.168.1.1

  first WRT610N router ip - 192.168.1.10

  But, when I tried to plug "second WRT610N router" by "first a router WRT610N" through second lan_cable(cat 5) router no internet connection provide (give)

  second router ip - 192.168.1.5

  so please tell me how can I solve this problem...

  This article may be able to help:

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.XML&PID=80&r...

• How can I configure my Time Capsule wireless for backups

  I recently changed the ADSL broadband cable. So it took to move my modem to the other side of the room where my cable connection. When I got the computer, modem, ADSL modem and the TC were a few feet from each other. However - now I have a wireless connection between my mac and the gateway Max Telstra modem and works very well. However, the TC has a yellow light hard now and does not connect to the internet. I can't the airport to recognize it as a base station and I think to be able to return to the company the automatic backups, I need to somehow get the TC identified as a base station. Would that be correct? I don't know if the yellow led indicates that the HARD drive in the unit has failed, but I begin to suspect this. Or - should I be plugging the TC on the modem and then try to have the computer to connect with the TC through the other side of the room?

  There are two ways to deal with the problem.

  However, the TC has a yellow light hard now and does not connect to the internet.

  Amber hard... which means no flashing is a very bad sign.

  Do a reset on the TC.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  Plug it into the Telstra modem and see if the front LED will turn to blinking orange.

  If it remains solid amber a failed hard drive is the most likely cause...

  Tell me what model it is... A1xxx of the base unless it is from the top.

  Another suggestion is to purchase a 2.5 "1 TB or 2 TB drive self-powered. That plug into your iMac and use it for backups... It is faster, cheaper and more reliable than the replacement of the TC.

  I'm in Melbourne... my email is available in the profile... so feel free to talk to me direct.

• How can I connect an old Apple studio for a new iMac display monitor

  I have (1) a (2) A Apple Studio display DVI - ADC adapter (2000) (3) an adapter in the Mini-DVI port on an old iMac (2008) is there an adapter that will pair the combination of (1) and 2 to one of the ports on my new iMac (2016)?

  Use an adapter Mini DisplayPort to DVI.

  (139189)

• How can I connect my printer 2600n wireless? my computer is a macro

  How can I connect my 2600n wireless printer.  my computer is a macpro

  It seems that the 2600n is a commercial LaserJet.  It may be better to post in the commercial LaserJet forums.

• How can I connect 2 monitors for a Pavilion p6 2120 Windows 7

  How can I connect 2 monitors for a Pavilion p6 2120 Windows 7

  Hello

  Based on the following link, you can have 2 monitors, 1 uses the VGA connection and 1 uses the connection DVD

  http://www.shopping.HP.com/shopping/PDF/h2m53aa.PDF

  All you need is to buy 2 monitors (can also have good analog & digital connectors) and 2 cables. Normally the cables should come in boxes.

  Kind regards.

• How can I connect my motorola boost vali to my pc

  How can I connect my motorola boost vali to my pc

  Hello

  First you must install the software phone provided with the phone, once you install the software, you can connect the phone via the USB data cable.

  For more information, I suggest you to consult the user guide for the phone and check if it helps.

  It will be useful.

• How can I set a time to open a program.

  original title; How can I set a time to open a program. For example to start IE to 1836hrs / or begin 15 minutes now

  If I use the computer, how can I set a time to open a program. For example to start IE to 1836hrs / or begin 15 minutes now

  Hello

  I suggest you try the methods mentioned below and check if it helps:

   

  Schedule a task

  http://Windows.Microsoft.com/en-us/Windows7/schedule-a-task

   

  Hope this information is useful.

• How can I connect my Airport time capsule to my WiFi network so he just backup my Mac and not extend nor want to be a base station

  How do I connect/install my time capsule airport to my new WiFi network so she just backup my Mac and not to extend my WiFi or want to be a WiFi hotspot

  There is no way to connect a TC to a wifi network. It must be connected by ethernet to the main modem or to the router.

  I don't understand what you're asking...

  If you want that the backup more wireless computer... How the TC cannot work as Wifi hotspot... It's impossible.

• How can I connect Apple 27 "display to cinema LED (mini-displayport output) on the new 12" computer Macbook retina?

  How can I connect the new Macbook 12 "portable retina to an Apple LED Cinema display 27"?

  You need an USB - C to mini displayport

  http://www.Amazon.com/s/?ie=UTF8 & Keywords = USB + c + mini DisplayPort & tag = googhydr-20 & index = aps & hvadid = 86274332185 & hvpos = 1 t 1 &...

  This is the Mac Mini Office forum. I asked that your post be moved to the MacBook laptop forum.