How can I create recovery discs?

Similar Questions

• Pavilion 17 TS PC notebook: How can I create another disc of recovery?

  My laptop came with Windows 8, but I have recently installed windows 10. I made a disc of recovery originally but now I think I need to make another as operationg system has changed. How can I do that. I get the message that I am only allowed to create a recovery after disk and it has already been done.

  Hello:

  A new set of recovery W10 media cannot be achieved in the conventional way.

  W10 will install on the C:\drive with no changes made to the recovery partition.

  What you can do after the installation of the W10 is to create an image of the installation process again once you have everything set up as desired.

  There is an image option (windows 7) to create a system in the control panel.

  Get a portable hard drive to save the system image on.  You can replace the image when you want with a newer version.

  Then, go to the Microsoft site and create a media installation/repair Windows 10 from the link below.

  https://www.Microsoft.com/en-us/software-download/ windows10

  To access the system image that you created, you start W10 (Flash DRIVE or DVD) media, you have created.

  On the lower left side to install it right now the window is a repair option.  You select the repair to access the system image that you created.

  Or with the media that you create from the link above, you can reinstall W10.

• HP Pavilion dv5-1012ea Vista Home P can not create recovery discs

  Hello
  A brand new shinney note book (hours old) followed all instructions verified the files help and FAQ but still cant Recovery Manager to create recovery disks
  IM using dvd + r than recommended Recovery Manager finishes the collection of long lines of process then shows the message error "warning disk image file exceeds 0 MB process cancelled. Enjoyed all the tips.

  Contact HP (in your country) and the recovery discs sent to you.

• How can I create a disc of recovery to windows vista Home premium

  I have a recovery disk, but it is 5 years old and I have to put in loads of two service packs and updates. What I need is a way to make a copy of cassis if anyone can let me know how I can do this.

  Hello

  This recovery disk or using the recovery of the manufacturer provided disk is a feature that included computer manufacturer, not a process from Microsoft.

  And you can't make another a method for the manufacturer to make one which includes updates, etc.

  But you can make an image of everything on your hard drive and save it to a hard drive to reinstall, if necessary, at a later date.

  If you want to make a complete PC Backup or a backup file only, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are other methods where you can borrow a Microsoft Vista DVD > copy it > then wake SP1 and SP2 to it, (no other updates).

  http://www.Vistax64.com/tutorials/151606-Vista-SP1-slipstream-installation-DVD.html

  SP2 info at the bottom of the link.

  See you soon.

• How to continue creating recovery discs after update window 8.0 to 8.1

  My laptop is hp 2000-2d62nr notebook pc (energy star) S/N: 5CG342027W

  I could ruin Manager HP recovery as follows:

  I was trying to create the recovery for laptop HP window 8.0 diskettes. HP Recovery Manager required 5 discs. After 2 discs actually, I left my cell phone for two hours. Then I went back to my laptop and saw the window asking me to update the window 8.1.  And I've updated to 8.1 window.

  After window 8.1 update done, the system has been restarted. On the way back to HP Recovery manager, he asked me to continue the third recovery disks. I selected "continue." However, drive 3 checked failed to 15%, the pop-up window asked me to use a different disk and try again. I've tried times second restart my laptop. Yet once, verified 3 disc failed at 2%,

  How to clean up this mess and do a 2nd set of recovery disks?

  Thank you for your suggestions.

  Best regards

  You can order your support page recovery media. Scroll the list of the drivers/software to see the possibility of ordering.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=6550395

  There is a small chance that you can get a free package if you call technical support HP & tell them that your laptop goes down being created. 800-474-6836.

• How can I create recovery media Partition

  Dear Sir

  I accidentally remove Recovery Partition (drive D in my computer)
  Now, I want to return this recovery, please help me what can do ' '

  

  Hello

  Please try the following link:

  http://support.HP.com/us-en/document/c00707939

  Kind regards.

• Possibility of creating recovery discs isn't available.

  I want to create recovery disks for my HP Pavillion 2260 - EA, Windows 7 64 bit, but the option is no longer available in my HP support Assistant. I selected the option once, but had to cancel because he wants more DVD discs I've owned. I then bought several discs. Now the option is no longer available for me to choose.

  In my view, we can only create recovery discs once. The PC noted, therefore, that I used this option, when in fact I've never really done. Can I do now?

  -Mike

  Hi, it is possible Action Center of this HPSA saw this task as completed and this is why it is not.  I recommend that you try to access the Recovery Manager through the start menu. If you select all programs from the start, you should see a list for safety and Protection, click on that and then click on Recovery Manager and finally, you should see a list for the creation of recovery media. Clicking on that brings you to the creation screen.

  If for some reason that there is no option, the only solution I know of "reset" of the option of creating media is to perform a recovery of HP sent a recovery media. Performing a restore partition recovery will not work.

  Hope this information helps. If you need help, please ask.

• How can I create a set of installation / recovery discs?

  Right now, my computer works well with Windows XP, SP3.  How can I create a set of installation / recovery discs?

  I have the original series OEM number upwards, but have more discs - do I need something else before I start?  Can I make my own computer?

  Right now, my computer works well with Windows XP, SP3.  How can I create a set of installation / recovery discs?

  I have the original series OEM number upwards, but have more discs - do I need something else before I start?  Can I make my own computer?

  http://www.ehow.com/how_4797051_burn-Windows-XP-recovery-disc.html

• How can I continue creating recovery discs?

  Hello! I just bought a HP Pavilion dv6-3011so, and told me to create recovery discs as soon as I had installed the computer. I read in the manual that I stopped the creation and that the next time I opened the Recovery Manager he asked me to continue and to insert the following DVD and so on.

  As it was getting late, I decided to stop creating and continue the next day (today), and I opened up to Recovery Manager. He didn't ask me to keep anything. I Googled it and couldn't find any information, not even on the HP website. I don't know if I should choose "Creating recovery discs" once again, but I think it will only begin to calculate how much Swedish I will need? Or it will not start calculating where I was when I interrupted the creation yesterday (I had just finished disc 2 of 6)? I don't want to do anything until I know for sure I do the right thing, because I feel that this can never be done again.

  Please help me!

  Hello

  If you restart recovery disc creation, it should carry from where you left off.

  Best wishes

  DP - K

• How can I create on my Acer system recovery discs?

  I need to store window 7 onDVD (back-up for window 7) for a brand new with Windows 7 operating system already in computer

  
  

  I compurt any new branch (ACER expires), already having Windows 7 installed. They advised me 1st step is to have a back-up for window 7.

  I want to do it myself, I began to use the computer again.

  • Can you send me guide/steps to store my window7 on DVD?
  • How many DVDs I need, I have a box of 4.7 GB dvd, so 4-5 enogh?

  Thank you

  Rafid

  When you use the Acer software to make records of recovery, 4-5 should be enough.

  Acer - create recovery discs:

  http://Acer.custhelp.com/app/answers/detail/A_ID/12866/kW/recovery%20disk

  Your Acer computer includes an eRecovery Management software that allows you to perform operations of restore directly from your disk hard drive , which allows a faster recovery process and no need for discs. eRecovery Management does, however, allow to create recovery discs. The recovery disks will allow you to restore your computer something happened to your hard hard disk .

  Note: According to Acer computer you have your eRecovery Management version may be slightly different, but the ability to create your discs will be available.

  To create your recovery discs backup follow these steps:

  1. Click on the Start menu, and then click all programs.
  2. In the list of programs, click the Acer file, and then click the Acer eRecovery Management .
  3. User account control Windows may request your permission to run this program, click Yes.
  4. In the Acer eRecovery Management window left click backup, and then click create a default disk factory.

     Note: If you use a laptop or netbook, you will be asked to connect your power adapter, make sure that the power adapter is plugged in before continuing, and then click OK.

  5. In the page to create a default disc factory select the drive you want to use for burning the recovery media, and then click Start.
  6. The disc is ejected whenever he has completed burning, if several drives are required insert a new disc when you are prompted, and then click OK.

  What makes a system image is another option, but it will usually more then 4-5 DVD.

  Create a System Image in Windows 7 before installing
   
  You can make an image of your installation of Windows 7 system and it allows to restore Windows 7 to its state when the image was made.
  1. click on the Start Menu and type "Save" then click on back up your files.
  2. then click on create a system image.
  3 select the location where to save the image of your system, and then click Next.
  4. check your discs to back up, and then click Next.
  5. verify the settings, and then click Start backup to start.
  6. once the backup is complete, it asks to create a system repair disc, click Yes.
  7. Insert a CD or a blank DVD on the hard drive, then click on create disc.
   
  How to restore Windows 7 from a System Image
  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• NB100 - How can I create a recovery on a USB CD?

  Hi friends,

  I recently got a NB100 with XP home. The operating system has been reinstalled and did not have any CD of the operating system.

  Given that I have not an external CD drive how can I create a recovery on a USB CD. I would like to see the function of USB USB just like the CD in case something really goes wrong.

  Can some help me to find a tutorial to do this?

  Thanks for your help.

  SAJ.

  Great! Thanks for sharing this with us!

• How can I create a full recovery for OS and preinstalled software media?

  Hello
  My son´s accompanying the new Satelite L855-10U preinstalled OS and much other software already installed on the HARD drive, but no installation media, the client is supposed to create a tool from Toshiba.

  I created 6 Swedish recovery for the operating system using the tools Toshiba had installed on the HARD drive.

  To do this 6 Swedish, I created with the Toshiba Recovery tool contain the operating system and all other preinstalled software?

  How can I create the installation media full and usable if not for the operating system and all other preinstalled software?

  I can´t find all the information on the backup software pre-installed with the exception of the BONE. Is there complete information how to do the above, in the manual of the computer, or have you missed this information?

  I would like to know how I can create media backup complete and usable for the operating system as well as for all other preinstalled software, so I can recreate all the facilities of the plant at a new disk if/when the original HARD disk crashes.

  Is there a partition hidden with pre-installed software, and if so, how can I create a backup of this partition, or all the software, so I can reinstall everything if the HARD drive fails, if it is already not with the Swedes 6 Toshiba tool created for me?

  Forward to your response and to complete your customer documentation about the complete instructions for installation and recovery media creation.

  Thank you very much!

  Baltazar

  Hello

  On this forum, you will find a lot of useful comments on the recovery image saved on the HARD drive and its operation to the facility and the creation of recovery disks.
  All this is clearly and simply.

  Front of Toshiba offer new people for laptop in software development create recovery image. This recovery image will be created for each laptop model (specific hardware configuration). Recovery image contains the operating system, all necessary drivers, tools/utilities Toshiba specific and some other software like DVD/Blu-Ray, Microsoft Office test drive and the antivirus application. With this configuration every laptop owner can begin to use the laptop without having to install important applications.

  This package is then saved on the HARD drive and can be used for the installation of HARD drive recovery - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm. In other words, if something is wrong with HARD drive recovery facility you can reset the preinstalled operating system and reinstall recovery imae. After that make you have absolute same settings you had after purchase and first start of the laptop.
  HARD drive recovery image can not be used if:
  -HARD drive is defective
  -you have installed the version of the own BONE
  Structure of the HARD disk partitions - is changed
  Recovery image - HARD drive is deleted or moved to another partition or copied to the external device.

  To avoid all this Toshiba recommends the creation of recovery disks. Using these disks, you will be able to install the OS on the new drive HARD or in any other situation listed above.
  Please note: the use of recovery disks will remove all HARD drive, create the new recovery partition and install image recovery, so you still have the same settings.

  I hope I can help you with my explanation. If you have any other questions you are welcome.

• How can I create a recovery via microsoft inbuild disk create recovery disk tool

  Thank you for helping

  Hi T10.

  First of all, I want to let you know that only the beta version of Vista SP1 included a handy tool called recdisc.exe which allowed you to create a repair/restore cd.

  It's sad to say with certainty why, in the final version, Microsoft has disabled this feature, we can find the icon but it can not be launched.

  If you don't want to use this tool, please refer to the following information. However, the instructions may not work on all Windows Vista system as this feature is disabled by default.

  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html (details are given in the second option the manual way)

  Hope the above information is what you are looking for

  good luck if this post can help solve your problem, please click the 'Mark as answer"or if you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I create photo recovery with Html 5 Webworks?

  How can I create photo recovery with Html 5 Webworks? Please answer me

  Hello

  We have the developer Micro Web camera API documentation available on: https://developer.blackberry.com/html5/apis/blackberry.invoke.card.html#.invokeCamera

• How can I create my own recovery dvd

  I just got my laptop T61 with Windows XP operating system.

  How can I create my own dvd recovery and how long will it take?

  Click START; ALL PROGRAMS; ThinkVantage; Create recovery media

  I thnk it took me about 20 minutes or more to complete.

  See you soon!