How can I fix the orange colors of night shots?

Hello, I shot an event and pretty much the best action was at night, but I'm a newbie to this and did not get the best iso and f during filming. I used a nikon d90 and most of the shots is known as orange. Is it possible to get the shot and give them a bit of color with masking, layers or something? I appreciate any help I can get. I'll fix the noise with magic bullet denoiser.

orange.jpg

Thank you!

There are almost no blue in the scene. Your best option would be to drop a solid cyan on orange (in front), and then set the color blending mode and adjust the opacity. Who would throw a little blue in the scene. Then it is to get the red, green and blue concentrations, gamma and pedestal (black) close enough to bring back some colors in the scene.

This is typical of the Sodium lights. There is a huge hole in the blue part of the spectrum. Add to that the absence of any other light source, and you have a serious problem of color that has been compounded by the lack of balance in appropriate color when you were aiming for.

If it were my images I'd throw just the blue channel or cyan on the orange mixture to color, adjust opacity and go for a look very low saturation.

Tags: After Effects

Similar Questions

  • How can I fix the old sick apple mouse from 6 months on wire scrolls alone now

    How can I fix the Apple mouse sick, aged 6 months on a thread that has been scrolling OK but now scrolls just of internet pages to the top of the page using El Captain so far?

    Probably need a clean place, tried.

  • How can I get the tabs colorful to use different distinct colors for 2 gmail accounts?

    Under Firefox 29.0.1 iMac OSX 10.9.3. I have multiple Google accounts: 2 1 Google Calendar and gmail accounts. Colorful tabs add-on will allow me to choose a color for a gmail account, but it also uses this same color for the other gmail account. How can I get the different colors on 2 gmail accounts?

    In addition, colorful tabs is also the same for my homepage (google.com) and my google calendar. How can I get different colors on these 2?

    Personally, I use 'Fabtabs' for my mozilla FireFox.

    https://addons.Mozilla.org/en-us/Firefox/addon/FabTabs/

    This add-on has problems like that when I use it.

  • How can I change the background color for the bar 'help file edit view history bookmark tools' in Firefox 29,0

    How can I change the background color for the bar 'help file edit view history bookmark tools' in Firefox 29,0

    You can add a theme of solid color to change the color of the top of the browser window, which contains the Menu bar.

    https://addons.Mozilla.org/en-us/Firefox/themes/solid

  • How can I fix the icons who are unable to move the bar to the add-on?

    How can I fix the icons who are unable to move the bar to the add-on?

    It didn't help me, but it was a good try. I found an extension called U I 1.4.4 Fixer who did most of what I was looking for. Thanks for answering my question so quickly Cor - el.

  • How can I change the background color of my iPad

    How can I change the background color of my iPad 1 5.1.1

    You can change the wallpaper via settings > brightness and wallpaper

  • How can I set the background color for a photo book to be between photos as well as on the perimeter?

    I am trying to create a book in iPhoto. I can set the background color, but it doesn't seem to work between photos that appears white by default. How can I make the background color of work between photos?

    You can not

    but to see exactly what you always get an overview of your book before ordering

    LN

  • How can I fix the error 35603 Runtime

    How can I fix the error 35603 Runtime

    Hi walter101,

    ·         What version of the operating system is installed on the computer?

    ·         When exactly do you get this error message?

    ·         What is the full error message?

    ·         You did changes to the computer before the show?

    Answer with the information required to help more.

    You can also see the article:

    Suggestions for a question on the help forums

    http://support.Microsoft.com/kb/555375

    For reference:

    What is a runtime error?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-runtime-error

  • How can I fix the ati display driver

    How can I fix the display driver?

    Hello

    I thing the problem is related to Internet Explorer. Try to see (the Internet Explorer menu) if in the display menu, the Zoom is set to 100%, the text size is set to medium and style is set to the default style.

    What version of Internet Explorer you are using?

    Please post the results.

    Best regards

    Andrew

  • Access to a specific registry key (HKEY_USERS\S-1-5-18\software\Microsoft) causes a BSOD. How can I fix the key?

    Original title: access to a specific registry key generates BSOD. How can I fix the key?

    Scans the registry in XP causes a BSOD. The wrong key is HKEY_USERS\S-1-5-18\software\Microsoft. Access to manually also causes a BSOD so I can't delete or export it. I do not have a restore point from before the problem started. Other than the access to that key or run a search, XP works well.
    Is it possible to fix this?

    Not having no not this error in my notes (in other words, I've not seen at least 2 times), I Googled it and first fell on a MS KB article:

    http://support.Microsoft.com/kb/810558

    This article includes this statement:

    Contact Microsoft Technical Support to help heal the corruption in the registry.

    I think that is where you are right now, so let's see what is the response of the Microsoft Support Engineer, now that there is more information.  I always love to see what they have to offer first.

    Why and how did you change the system restore to create restore Points 3 a day for 30 days (FYI - that is not the same as a backup).

    If you were to solve some problem at the time, what was the question?

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    In the meantime, I would run a chkdsk /r on your volume XP since XP Recovery Console.

    If you are not sure of the SP2 CD you have is an XP bootable installation CD authentic and not some kind of restore CD for the Dell system to 100%, I would recommend this (that I've seen more than 2 times):

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • How can I fix the error on the email page. It doesn't let me open the e-mail.

    Error on the email page

    How can I fix the error on the email page. It doesn't let me open the e-mail. I can get there but nothing opehs I have windows xp... Please contact me at * address email is removed from the privacy * thanks for any help

    Are we to guess which email page you are talking about? Could this be one of them?

    View all Windows Live and Hotmail questions in the appropriate forum found here:
    http://windowslivehelp.com/

  • How can I fix the error "searchfilterhost.exe" which keeps closing down of my computer?

    How can I fix the error "searchfilterhost.exe" which keeps closing down of my computer?

    SearchFilterHost.exe is part of Windows Search. However, it is Malware which can pass searchfilterhost.exe.
    I would like to start by downloading the free version of this tool. First check the updates and then run a full scan.
     
     
     
  • How can I fix the following in "Scanner and Camera Wizard" error message an error occurred while setting scanner preferences.

    How can I fix the following in "Scanner and Camera Wizard" error message an error occurred while setting scanner preferences.   I have widows xp pro

    Hi Plumbbgp,

    1. what brand & model of the scanner?

    2. the scanner was working fine before?

    3. don't you make changes on your computer before this problem?

    Please provide us with more information about the issue so that we can provide you with the necessary assistance.

  • How can I fix the link between adobe and windows if I see .pdf not win32 application

    How can I fix the link between adobe and windows if I see .pdf not win32 application, without the disc?

    "Adobe" is the name of the company that provides a great many different applications.

    Adobe Reader is free and allows you to view pdf files.

    Adobe Acrobat is expensive and allows you to create, edit and view pdf files.

    Assuming that you are referring to the reader, uninstall all the versions of it using the control panel > add or remove programs.  Then either

    1. go to http://get.adobe.com/reader/?promoid=BUIGO and download the current version (remember to uncheck the box to install McAfee Security Scan Plus.

    or

    2. go to http://www.foxitsoftware.com/Secure_PDF_Reader/ and download Foxit Reader, a small pdf reader and many more.

    Then, install the reader that you have downloaded.

  • How can I fix the screen because everything is horizontal and not vertical poster?

    How can I fix the screen because everything is horizontal and not vertical poster?

    Hello

    Please tr

    1. Press and hold Ctrl + Al bot
    2. Press the enemy (left or right because I do not know what sense on your screen)

    Hope this helps

Maybe you are looking for

  • Is Satellite 1800 712 has USB 2.0 ports?

    Now I'm aware is no new laptop even though im wondering if she takes care of USB 2.0? As a transfer of data, from pens to the pc then for laptop ETC. If it is a driver/firmware update available?As the specification of Toshiba just declare '2 x USB' a

  • I tried to add another email but I did ' t get, how can I get?

    I don't want to change my email and password, but I tried adding 2 different email and when I need to write that the password did not, so how can I do? Can I have different emails?

  • repeated the blue screen of death in windows vista.

    hope that someone would be able to give me easy understandable advice? It is all the information that I received the error report that I apologise for the collage what anyone who is not relevant, but not'm not computer savvy. Thanks gavin. Problem ev

  • APEX: Trigger with App_Page_ID

    I came across a problem where I have a trigger to capture before change data.Do not, I realized that it also work on other scripts belonging to other pages.Can I have the trigger to operate on the specific ID of Page?I tried to insert this way and do

  • AMQP plugin 1.0.4 use TLSv1 Protocol

    Hi allI work with vRO 7.0.1.3533702, who has AMQP Plugin 1.0.4 installed by default.I connect to a RabbitMQ 3.6.2 server on RHEL6.7.I have configured RabbitMQ to use TLSv1.2 and TLSv1.1 in the file 'rabbitmq.config '. [   {ssl,     [       {versions,