AMQP plugin 1.0.4 use TLSv1 Protocol

Similar Questions

• How to fix it. Problem of "Serial Cable using IrDA Protocol" it says Code 43 I use window XP

  How to fix it.  Problem of "Serial Cable using IrDA Protocol" it says Code 43 I use window XP I have no idea what the point is that the origin of the problem. Is there a link I can go to-to solve this problem? Thank you in advance.

  Yes, just right click on the device in Device Manager and select uninstall.  When you restart, Windows can detect the device and try to reinstall.  If the error is returned, post back - if this error is related to a laptop that has an infra-red (IR) integrated connector, you can disable this device in the BIOS.

• Windows has prevented my device Infarred "Serial Cable using IrDa Protocol" to 43 of the Labour Code

  Windows has prevented my device Infarred "Serial Cable using IrDa Protocol" to 43 of the Labour Code

  Can someone help me with this please. Can I change the value and it Peel attention but in a few moments it will return on attention. I have no idea how yo what is causung this also...

  Hello

  ·          You have installed the latest Service Pack for Vista?

  Uninstall and reinstall the device.

  a. Click Start.

  b. in the type of search box of start of "devmgmt.msc" and press ENTER.

  (c) in Device Manager, look for the device that has an error and expand the device with the error.

  d. right-click on the device with the error and uninstall.

  e. restart the computer and check if it installs the drivers and it works great.

• Serial cable using IrDA protocol does not work correctly. Steve Stephens, * address email is removed from the privacy *.

  The difficulty it Center Microsoft said that my serial cable using IrDA protocol does not work properly.

  Appreciate any suggestions on how to solve this problem.

  Steve Stephens, * address email is removed from the privacy *.

  Hi, Steve Stephens.

  Did you run the fixit available in the link below?
  Hardware devices do not work or are not detected in Windows

  Method 1: Check for any error message in Device Manager

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:

  (a) open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  (b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in the Device Manager, find your device, and then double-click the device name.

  (d) If an error code has been generated, the code appears in the status area of the device under the general tab

  
  Method 2: download and install all available Windows Update

  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Method 3: Download and install SP2

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

• Try to access some Government Web site, but get message that it uses a protocol not supported.

  Original title: compatibility

  I'm doing something online with a governing body, but whenever I try to go ahead he said he uses a protocol not supported... can you help me please

  Hi Marystack,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem you are trying to access some government site but get message that it uses a protocol not supported. This question might be if you are connected to a network domain, or there is no restrictions applied to surf these sites.

  If you use Internet Explorer and cannot open certain websites then, there may be a chance that the site is not compatible with Internet Explorer. So, I suggest to open these websites in compatibility view and see if it helps.

  • Open Internet Explorer.

  • Open Web site which is getting blocked.

  • To open the toolbar, press the alt key pressed .

  • Now, click on Tools.

  • Then click on compatibility view settings.

  • You will see the name of the Web site under Add this Web site, to do this, click Add to add this Web site.

  • Close the window and restart your computer.

  Try it out below mentioned methods and see if it helps you to solve the problem.

  Method 1

  If the problem persists, try to trust these websites by following the steps mentioned below.

  Step 1: Open the trusted sites

  1. Open Internet Explorer.
  2. Press the Alt key to display the Tools menu.
  3. In the menu, click Tools.
  4. Now, click on Internet Options.
  5. Click on Security tab.
  6. Select Trusted sites.
  7. Click the Sites.

  

  Step 2:

  Add the trust Web site

  1. Enter the address of the site you want to add.
  2. Click on Add.
  3. Close the open windows of Trusted Sites and Internet Options .

  

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• How to get the functionality of the Plugin BB10 webworks development using phonegap.

  Hi all

  How to get the functionality of the Plugin BB10 webworks development using phonegap.

  Thank you all

  Here is a link to the documentation specifically: http://docs.phonegap.com/en/2.6.0/guide_plugin-development_index.md.html

  We will update the things little when we adopt a more close relationship with Cordova.

• try to connect to the rds pool using rds Protocol keeps failing

  try to connect to the rds pool using the Protocol rdp guard fail with the following error.

  PCoIP works very well.

  

  I fixed it. I had to change to each host of the session that follows.

  

• Internet speed to use the Protocol 'ac '...

  How long should my internet connection be to use "ac" from my new iPad (Air 2, 128 gb)? It will be the last (official) version of iOS. My current wireless modem supports all protocols except 'ac '.

  First of all you need a WiFi modem that supports 802.11ac

  Read here:

  IEEE 802.11ac is a wireless network standard family 802.11 (which is marketed under the brand name Wi-Fi), developed in the process of The IEEE Standards Association ,^[1] offers broadband wireless local network (WLAN) on the 5 GHz band. ^[1] the standard has been developed from 2011 to 2013 and approved in January 2014. ^{[1] [2]}

  The specification a multi-station to at least 1 gigabit per second flow and throughput of single link of at least 500 megabits per second (500 Mbps). This is accomplished by extending the air interface concepts embraced by 802.11n: RF more bandwidth (up to 160 MHz), more spatial stream MIMO (up to eight), downlink multiuser MIMO (up to four clients) and modulation high density (up to 256-QAM). ^{[3] [4]}

• A Web site that I use States: this agency will support is no longer using the Protocol of internet security TLS 1.0 or 1.1 - how to change this with Firefox?

  I use a site that now has the following statement:

  Safety notice: as part of our ongoing efforts to improve security, this agency will be no longer support the use of the internet security TLS 1.0 protocol effective August 1. In addition, we will also stop the support for the Security Protocol Internet TLS 1.1 on 1 September. This means you must update your browser to use this site. For any questions about the update, please consult your browser provider.

  How do I change this?

  Unless your Firefox settings have been changed, Firefox is ready for sites that use TLS 1.2, the latest version of the SSL protocol.

  For example, if you click on the Green padlock on this site, so more information, the bottom of the Panel security in the Page Info dialog box should show that the page was encrypted using TLS 1.2. I have attached a screenshot showing where to find this information.

  Can you confirm that this works?

• If I have already installed plugins, then switch to Firefox, do I download plugins for FF to use Adobe, Picasa, itunes, etc.?

  I switch to Firefox today from Windows Explorer. On my computer, I have programs like itunes, Picasa, Adobe, Java. I need to download these programs specifically for Firefox plugins?

  Also, I used Windows Security Essentials for my computer. Can I still use that? Firefox offers security as a firewall, automatic updates and virus protection? If I need to make a change, what do you recommend?

  Thank you very much for your time and your attention.
  Carol
  resykl

  Hi Carol,.

  To answer, (cor - el will probably add its own information) Firefox does not come with any pre-installed antivirus that Firefox is not an antivirus program. Microsoft Security Essentials protects the entire system and your web browser. You can meet a ton of ads while so I always use Adblock Plus. Blocks a boat load of ads.

  • http://adblockplus.org

• Why the plugin-container is very use 50% of the CPU?

  The container.exe - plugin in firefox 4.0 use about 50% of the CPU it forces worst response time for other applications that are running.

  Please check if Firefox is running in Windows compatibility mode - see here.

  Otherwise, check the extensions, you can run - see here.

  If still no luck, please have a read through the article Firefox consumes a lot of CPU resources for other causes possibly.

  Feel free to contact Firefox support again if you still have problems.

• How to monitor the parameters using the Protocol Modbus in LV

  Hello everyone

  I have a problem with my LabVIEW project. I have to watch my monitor settings MI4100 Power using LV 8.5 and I don't really know how. I use the modbus RTU Protocol and I am able to communicate with the instrument, but I can't understand how to monitor records.

  I have attached my comunication VI to see what I've done. Please help me if you can.

  Thanks in advance, Sylvia

  If you work with 32-bit numbers in need of two registers, then what you already do with numbers to reach work.   Read 2 registers from 256, contact numbers, and you'll have nonexercising total power.

  If you read only 1 register, then you will have a table of 1 item.  Decimate this table and joining the numbers don't make any sense.  You'd read comes directly from the registry.

  What is the description of the error for 6002?

  I don't see any reason why you wouldn't be able to read an address greater than 30.

• VISA Read Timeout error when using stream protocol BUS

  Hello

  I currently use the BUS Flow for a MFC Protocol and I get a time-out error VISA Read:

  Error 1073807339 occurred at VISA read in Send Setpoint.VI-> test.vi

  Possible reasons:

  VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  I extracted the part of the code and it attached to this message. Basically, whenever I hit OK to send a VISA just read set value times out. I tried to use the sub VI who is responsible to send the set value and it was fine (when manually, I copied and pasted the ASCII codes) but when I run the global function it times out.

  Any help is appreciated

  Thank you

  If you have a command string or a constant you enter a \r\n in, you MUST have '-' Codes view turned on in order to enter the actual control characters. If you enable "\" Codes to display and see \\r\\n, then you have used Normal display to enter the characters.

• Communication of VISA with connected USB GSM modem using a protocol AT

  Hello, I am writing an application that should send sms messages.i have a connected USB GSM modem that supports the PROTOCOL. The modem works by using its own software and the HyperTerminal.I have used VISA driver development Wizard to create the .inf file. The device is now recognized and registered to the MAX. However, I can't understand how to code the commands and read the responses using write VISA and VISA read. Thanks for the help, Dima

  The last thing you should have to do is create an INF with the wizard. Remove completely and the compiled version. What you want to do is to use the inf file supplied with the device which a serial port to the BONE and makes it usable with Hyperterminal. It should appear in MAX as a serial port. Once you have restored all the way it is, then you can start with the examples of series and writing to it should work as it did in Hyperterminal. In other words, simply send the chain of command.

• Get 810 error message when you try to connect to the VPN using L2TP protocol

  Original title: L2TP will not let me connect.

  I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests).  All are not updated, but the PPTP, IKEv2 work without problem.  The second server that has the CAs and RRAS is a member of the AD - DC server.  The Win7 is not on the domain and I have Win7 a client certificate.  I have ensured that the CA root of trust is in the user store and computer Trusted Root CA.  I have also ensured that the Win7 client certificate is in the user store and personal computer.  I get a 810 error message when I try to connect to the VPN using the L2TP protocol.  I have exhaustively studied this problem and I can't find a solution to this problem.  I also raise the functional level of the domain to 2K8R2.

  I think this should be a simple and easy solution, but where can I find the answer?
  Please help me.
  Thank you for your time.
  Allan.

  Hi Allan,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  If you need any other assistance, let know us and we would be happy to help you.