How can I follow and see my annotations?

Similar Questions

• How can I check to see if my system and components are compatible with VISTA, given that the counsel is no longer available and my office will take too many changes to make it compatible with WIN 7?

  I am running WINDOWS XP on my desktop and would like it ungrade to WINDOWS VISTA, but I don't know if all my devices are compatible with WINDOWS VISTA! I would like to upgrade my desktop computer for WIN 7, but it would take too many changes, so I'm going to update my laptop for WIN 7 and I have another laptop running WIN XP! So basically I want to have at least one of the three operating systems (XP, VISTA and WIN 7) on my different computers! WIN XP on my laptop older, WINDOWS VISTA on my desktop (currently in XP) and WINDOWS 7 on my laptop latest (running VISTA)! I just want to know how to find out if there is a way to see if all my components on my desktop are compatible with WINDOWS VISTA, but the Advisor WINDOWS VISTA is no longer available? I used the WIN 7 Advisor to check what is required for me to upgrade my desktop PC to WIN 7 but there are too many changes that need to be done! I also used the WIN 7 Advisor on my new laptop and it has only a few changes that need to be done and that is why I want to upgrade my laptop to WINDOWS 7 and my desktop for WINDOWS Vista!

  Hello

  I already gave you advice available to upgrade to Vista in your other thread earlier in this forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/how-can-i-check-to-see-if-my-system-and-components/7e626228-5572-E011-8dfc-68b599b31bf5

  You should check with the manufacturers of hardware and program

  and use the Vista Compatibility Center

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  and read the vista system requirements

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

• I can switch between the code sheet and css html, but I would like to see them both at the same time as well as the design window. Right now and can see rather the design and code html or design and css. How can I arrange to see all at the same time, of

  Hello

  My name is Ellie and I am new to Dreamweaver.

  I can switch between the code sheet and css html, but I would like to see them both at the same time as well as the design window. Right now and can see rather the design and code html or design and css. How can I arrange to see everything at the same time, design, HTML and CSS?

  Thank you

  It ends up something like that...

  

• I could not CS3 production Premium still to start. So I uninstalled just yet and just reininstalled again. Now, it does not accept my CS3 production premium password. How can I reinstall/activate & see cause does not start? I have WinXP

  I could not CS3 production Premium still to start. So I just uninstalled and reinstalled just yet. Now, it does not accept my CS3 production premium password. How can I reinstall/activate & see cause does not start? I have WinXP.

  Please check: https://helpx.adobe.com/creative-suite/release-note/creative-suite-3-production-premium.ht ml

  Concerning

  Stéphane

• How can I copy and paste a pdf form on my Clipboard Mavericks. I see that word wrapped text.

  How can I copy and paste a pdf file in my Clipboard Mavericks. I see that word wrapped text.

  If the form is saved in PDF format, can not you just place the PDF file in the other application?

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• How can I check to see if I have a corrupt registry

  How can I check to see if I have a corrupt registry and how do I fix this problem

  Hello

  If you have a damaged registry, there will be an error message and system problems are not associated registry.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  ------------------------------------------------------

  In some cases, an in Place upgrade/repair Installation is required which allows to keep the programs
  and although redundant data backups are always a good idea.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Hope these helps.

• How can I check to see if my burner is properly connected?

  C00D119F

  How can I check to see if my burner is properly connected? Using Windows Vista.

  Hello

  C00D119F: Cannot copy files to recordable disc
  Windows Media Player cannot copy files selected on the CD - R or CD - RW disc. To resolve this problem, do one or more of the following and then try again:

  * Make sure that the CD - R or CD - RW drive is connected.
  * Clean the disc and make sure that it is not damaged.
  * Try a different brand of CD - R or CD - RW.
  * If another program is currently copied files to the CD - R or CD - RW disc, wait until the copy process is finished.
  * Quit other programs that might be using the CD - R or CD - RW drive.
  * Restart Windows Media Player.
  * Restart your computer.
  * Select a slower recording (write) speed.
  * Use the Windows error-checking tool to find system errors of files with bad sectors on your hard drive. For more information about the error-checking tool, see Windows Help.

  To select a slower recording speed

  1. in the Tools menu, click Options, and then click the devices tab.
  2. in devices, double-click the reader of CD - R or CD - RW Drive and then click the recording tab.
  3. in the write speed list, select a slower speed.

  If the problem persists, the CD - R or CD - RW drive may be defective.

  See you soon,.
  Raymond

• How can I download and install the phone dialer for windows vista

  How can I download and dialer phone inatall for windows vista

  Hi EddyValladarees,

  (1) what exactly are you trying to accomplish?

  Method 1: Windows Vista has a phone dialer; You can access it by following the steps below

  (a) click Start, type in the dialer in the search box and press ENTER to display the phone dialer

  Method 2: Can also download and install software third phone; You can search the internet for this software that will help you in your task.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can see

  Options of modems and: setting up calling card information

  http://Windows.Microsoft.com/en-us/Windows-Vista/phone-and-modem-options-setting-up-calling-card-information

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• How can I import and export MBOX files in Thunderbird?

  Hi all, how can I import and export MBOX files in Thunderbird?

  I tried to install the add-on "ImportExportTools" but it seems that it is no longer recognized by Thunderbird, not the most recent generation.

  That this is the case, is no longer seems to be any official method of handling the files MBOX via Thunderbird, which is odd, given that Thunderbird itself announces that it is method of storage of email records is also MBOX files. It seems obvious that Thunderbird should natively support a file format import and export it is used internally

  If you know of a solution that does not rely on the conversion of traditionally third party utilities little reliable, please let me know.

  Thank you, KB_IT

  Hi there and thank you. I got it on 45.2.0.

  "" I haven't managed to make it work, but only by the search for available modules and following a request from 'import export tools' the "see all results" that work only then produced a success for the plugin in question and showed a button to install it.

  Installers hosted on the site of the third party do not work, nor their instructions to use the option "install file". work, which led to the creation of this ticket.

  Since then, I was able to do properly installed where it works very well.

  I hope that they are a regular feature. I intend to announce this as a best practice to my organization, in collaboration with Google fish, during the handling of the mbox files in Windows operating system.

  Thanks again, Kevin

• I bought Photoshop elements 11, thought that I had saved but have not. How can I download and reinstall?

  I buy Photoshop elements 11 about a year or two he y a. thought that I had saved, but I did not. How can I download and reinstall. I have my serial number. Thank you

  Hi Nick,

  Please use the following link to download and install Photoshop elements 11:

  Download Photoshop Elements | 10, 12, 14, 11, 13

  See also, find the serial number of your product Adobe quickly

  Kind regards

  Bani

• I have the disc of 12 photoshop elements, but my computer does not have a disc inserted. How can I download and enter the serial number off my drive for installation?

  I bought the 12 photo shop elements. It came with a disc, but my mac does not have a disk. How can I download and enter my serial number on the disk for the installation?

  You can download items online instead. Please see the following links for the files:

  Photoshop elements 13, 12, 11, 10 | 9, 8, 7

  First items 13, 12, 11, 10 | 9

  Guinot

• How can I make and delete a snapshot of the command line in ESXi 4?

  How can I make and delete a snapshot of the command line in ESXi 4?  ghettoVCB4i does, but I need unusual behaviour for two virtual machines.  I need to be able to save only one of the two virtual drives, not both.  So I can't use this script here.  I need to write a script that will:

  1 copy off the .vmx

  2 make a snapshot of a virtual computer running

  3 use the vmkfstools command to clone the vmdk in the backup location

  4 remove the snapshot.

  The snapshot is the part that I do not know how.  I do not see a flash drive in vmkfstools and I do not understand the snapshot code in ghettoVCB4i.

  Thank you!

  vmkfstools is a tool for working with VMDK, has nothing to do with stereotypes. In the Busybox unsupported console, the only tool that you can use for some of the management of the virtual computer is vim-cmd , which is about a wrapper for VMware vimsh, take a look at our site for more information: http://engr.ucsb.edu/~duonglt/vmware/#vmware_vimsh

  Basically, you're going to do something like the following:

  vim-cmd "vmsvc/snapshot.create XXXX FIRST_SNAPSHOT MY_FIRST_SNAPSHOT_1"
  

  where XXXX is VmId to the virtual machine that is retrieved from vmsvc/getallvms, then you are going to deliver the snapshot.remove

  Here are some other useful commands dealing with snapshots:

  Vim - cmd vmsvc/snapshot.removeall \[VmId]

  [[[vim - cmd vmsvc/snapshot.remove \[VmId\] \[removeChildren\] \[snapshotLevel\] \[snapshotIndex\]

  Vim - cmd vmsvc/snapshot.get \[VmId\]

  ghettoVCB4i uses vimsh to do these things as well.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• How can I find and download "Sea Hero Quest"?

  How can I find and download "Sea Hero Quest"?  For my PC.

  What is "Sea Hero Quest" - it does not resemble music, kind of Apple's music is not relevant here. If it's a game, which is what it sounds like, then the version in the App Store does not on anything other than iOS, or in the Mac App Store on something other than a Mac.

  Looking for an Android version use the Google game store. To see if there is a PC version, you must use Google.

• How can I copy and burn a cd? HP Pavilion g7z B7M25AV Windows

  How can I copy and burn a cd?     HP Pavilion g7z B7M25AV Window7

  I don't see any software for it on the new PC listed in the list of programs.

  Thank you

  Hello

  You can use this:

  http://Windows.Microsoft.com/is-is/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

  or this:

  http://Windows.Microsoft.com/is-is/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  Kind regards.