How can I get a Windows 7 disc?

Similar Questions

• Vista \Windows\system32\winload.exe is missing, how can I get the Windows installation disc?

  I have a HP Pavilion dv6500 Laptop, I'm trying to restore my system, but the system wants to use a Windows Setup from disk because my windows/system32/winload.exe could not be loaded"status: 0xc000000f Info: the selected entry could not be loaded because the application is missing or damaged. »

  The windows installation is located in the machine, and apparently the recovery has not copied as part of the recovery disk.  I tried to identify if a recvery kit was available and it seems that maybe not.  What must I do to fix this?

  Have you tried to type the F11 key immediately after switching on the laptop. This should start in the hard disk partition recovery.

  You should be able to order by phone recovery disks. If you are USA / Ca... 1-800-474-6836

• HOW CAN I GET A WINDOWS XP BACKUP DISC?

  HOW CAN I GET A WINDOWS XP BACKUP DISC?

  Your computer came with Windows XP pre-installed?  If so, contact those who sold you the computer.

  John

• How can I get the windows update? X8024400A error)

  I did a restore after my pro windows xp crashed now can't do windows update! How can I get the windows update? I get an error from the site Web has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. X8024400A error)

  Please help me!

  I could not download my favorite Antivirus unable to get updates.  Only a few site I couldn't even. It seemed to get worse until:

  I fould a place that gave me these instructions:

  1. Reregister the BITS files and Windows Update files. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • Regsvr32.exe atl.dll
     • Regsvr32.exe urlmon.dll
     • Regsvr32.exe mshtml.dll
     • Regsvr32.exe shdocvw.dll
     • Regsvr32.exe browseui.dll
     • Regsvr32.exe jscript.dll
     • Regsvr32.exe vbscript.dll
     • Regsvr32.exe scrrun.dll
     • Regsvr32.exe msxml.dll
     • Regsvr32.exe msxml3.dll
     • Regsvr32.exe msxml6.dll
     • Regsvr32.exe actxprxy.dll
     • Regsvr32.exe softpub.dll
     • Regsvr32.exe wintrust.dll
     • Regsvr32.exe dssenh.dll
     • Regsvr32.exe rsaenh.dll
     • Regsvr32.exe gpkcsp.dll
     • Regsvr32.exe sccbase.dll
     • Regsvr32.exe slbcsp.dll
     • Regsvr32.exe cryptdlg.dll
     • Regsvr32.exe oleaut32.dll
     • Regsvr32.exe ole32.dll
     • Regsvr32.exe shell32.dll
     • Regsvr32.exe initpki.dll
     • Regsvr32.exe c:\windows\system32\wuapi.dll
     • Regsvr32.exe c:\windows\system32\wuaueng.dll
     • Regsvr32.exe wuaueng1.dll
     • Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll
     • Regsvr32.exe c:\windows\system32\wups.dll
     • Regsvr32.exe wups2.dll
     • Regsvr32.exe wuweb.dll
     • Regsvr32.exe qmgr.dll
     • Regsvr32.exe qmgrprxy.dll
     • Regsvr32.exe c:\windows\system32\wucltux.dll
     • Regsvr32.exe c:\windows\system32\muweb.dll
     • Regsvr32.exe c:\windows\system32\wuwebv.dll
  2. Reset Winsock. To do this, type the following command at a command prompt and press ENTER:
     netsh winsock reset
  3. If you are running Windows XP or Windows Server 2003, you must set the proxy settings. To do this, type the following command at a command prompt and press ENTER:
     Proxycfg.exe d
  4. Restart the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • net start bits
     • net start wuauserv
  5. If you are running Windows Vista or Windows Server 2008, erase the BITS queue. To do this, type the following command at a command prompt and press ENTER:
     Bitsadmin.exe/Reset /allusers
  6. Install the latest Windows Update Agent. For more information, click on the number below to view the article in the Microsoft Knowledge Base:
     949104 (http://support.microsoft.com/kb/949104/) how to obtain the latest version of the Windows Update Agent to help manage updates on a computer
  7. Restart the computer.

  After doing these, well most of them work. When I clicked on OK, but some are not. All of this worked!   I was able to update.  I was about to throw my computer!

  I don't know the tip you give here would have worked more quickly.  I just couldn't not here. Something was originally internet Exployer of do not leave me here.

  I had to work on him. Now everything seems to work very well. I have sort of my breatgh again and wory that error could haoppen again.

  1 million for your help thanks. It's great to have a place like this with pro like you here.  Much appreciated by a non pro like me.  Great place to learn more about computers.

• How can I get my windows reactivated as I can't use my old product key more that it is not accepted...

  The message says:-since first, windows has been activated on this computer, Windows must be reactivated within 3 days.

  The message says:-since first, windows has been activated on this computer, the computer hardware has changed a lot. Because of these changes, Windows must be reactivated within 3 days. You want to reactivate Windows now?

  How can I get my windows reactivated as I can't use my old product key more that it is not accepted...

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  Aalst certainly just use the actual activation.

  telephone activation.
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you.

• How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?

  How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?

  It allows only wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password, of which none seem to allow me to select a LAN (ISP) simple (without a password).

  I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; only the mail tool can't seem to see or use.

  Whenever I tell the Windows Mail email 'Send and receive', he wants to 'connect' for remote access or one of his three choices (listed above and direct exclusion of any connection to the local network).  It works with remote access, so once I have spend that I should be Ok. but I can't make it work directly.

  Help.

  In Windows Mail, go to select Tools, accounts, your account email, properties, connection.  It shows for the connection?  You
  should leave this setting not selected, in which case Windows Mail will use the IE connection uses.
   
  In addition, under Tools, Options, connection, the first checkbox must be checked, and the second box unchecked.
   
  If everything which withdraws, but you still have the problem, the account may be damaged.  Remove account, restart Windows Mail,.
  then recreate the account.
   
  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------
   
  "W6NCT" wrote in the new message: * e-mail address is removed from the privacy... *
   
  How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?
   
  They don't allow that wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password.
  which none seems to allow me to select a LAN (ISP) simple (without a password).
   
  I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; is not only the messaging tool
  to see or use.
   
  Whenever I tell the Windows Mail email 'Send and receive', he wants to "connect" to remote access or one of his three choices (listed
  above and to the exclusion of any direct connection to the local network).  It works with remote access, so once I have spend that I should be Ok. but I just
  cannot operate directly.
   
  Help.
   
   

  Gary van, Microsoft MVP (Mail)

• I had windows 10 and it crashed my pc. A friend put a test windows 7 on my pc and now it says that it isn't geninue copy of windows. How can I get back windows 7?

  How can I get my windows 7 back, as if it was before? And I have to pay for this?

  Windows 10 crashed my pc, and I need help please

  Claire-

  The PC comes with Windows 7 the plant?  If so there should be a COA sticker on the outside, or under the battery with a product key used to activate.  Also on the label is printed the licensed version.  Now look at control panel > system to confirm page which is the version that has been installed.  If so, scroll down to the activation link to "Change product key" and insert the key to the sticker.

  It is easy to mistake the 25 digit key characters.  What I do is take a picture of the phone and huge blow up, so check each character before submitting the key.

  If Windows 10 had activated, you can also get a facility much better to do a Clean install Windows 10 improvement will be paid to questions of lower upgrade installation, which should reactivate with the permanent right granted once did you the upgrade.

  Let us know if that helps.

• How can I get my Windows Live Mail TDS account gmail?

  How can I get my Windows Live Mail TDS account gmail?

  TDS.net is my server.  Thanks for your help.  I have download autorun but have not found anything familiar here (Gmail).  I will save this information and talk to my tech if it interferes with my emails again.  For now, it is not appear and my Windows Live Mail works.

  Thanks again!

• How can I get library window to view ZIP files?

  Original title: file JIP

  How can I get library window to view ZIP files?

  Hello

  You cannot view .zip file-by-file Windows Photo Viewer.A ZIP contains one or more of the files that have been compressed to reduce the size of the file, or stored as-is.

  First, you'll need to extract all the files from the .zip file and then try to view the photos or images in the extracted folder.

  Compress and uncompress files (zip files)
  http://Windows.Microsoft.com/en-us/Windows7/compress-and-uncompress-files-ZIP-files

  View and use your pictures in Windows Photo Viewer
  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can I get the Windows Fax and Scan program to scan mutiple page to a file rather than to each page into a separate file?

  How can I get the Windows Fax and Scan program to scan mutiple page to a file rather than to each page into a separate file?

  You don't, so use the scanning software provided by your device manufacturer, assuming that you have installed the unknown device with their installation cd or the download direct the full version of this site to the

• Pavilion dv7-6195us: How can I get a Windows 7 ISO to my OEM license?

  Hi all!

  I expect to download a Windows 7 Home Premium 64 bit ISO from Microsoft, but I'm having trouble. Since I bought my laptop HP with Windows preinstalled, the Microsoft site I cannot get an ISO. It forces me to contact my manufacturer instead.

  How can I get an ISO of Windows of HP?

  Thank you

  Rex

  Order recovery USB:
  http://support.HP.com/us-en/product/HP-Pavilion-dv7-6195us-entertainment-notebook-PC/5082216/model/5141410/document/bph07143
  
  Contact HP directly to USB recovery:
  https://support.HP.com/us-en/contact-HP/product/HP-Pavilion-dv7-6100-entertainment-notebook-PC-series/5082216/model/5141410
  
  Or here:
  http://www.computersurgeons.com/p-21338-recovery-kit-658854-001-for-HP-Pavilion-entertainment-notebook-PC-model-number-dv7-6195us.aspx
  
  Either way it will cost you $30 or more.
  
  Concerning
  
  Visruth

• How can I get the windows classic color schemes (extra-large) for Server 2003

  Hello

  I have an installation of Windows Server 2003 Ent Terminalserver. Here, I am able to select a colorscheme like classic windows (extra-large).
  On an other W2K3 Terminalserver, I am not able to select. Only normal color schemes are possible.
  How can I get these additional color schemes.

  Thanks for the replies.

  Concerning
  Marc

  Hi Knima,

  Thanks for posting on the Microsoft Community Forums!

  I suggest you to send your request in the TechNet Forums for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• How can I get the Windows 7 Media Center guide to update the channel list.

  I noticed that lists of TV channels in Windows 7 Media Center guide are incomplete.  Not all available channels are appearing.  They disappeared for some time.  I checked the lists online of zapsit and they contain the missing strings.  The program zap2it descriptions are more precise than what appears in the Media Center guide.
  How can I get the added missing channels?
  Keep us on that.
   
  Please also post the questions to
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/114.aspx
  and do not forget to mention the Colossus when you post experts.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• How can I get a windows xp installation disc. Need to start over.

  Need to redo my computer from scratch.  You will need an installation for windows xp disc.  Any help?

  You have an OEM computer (such as HP, Dell, Compaq, Gateway, Toshiba, etc.)?  If so, most of these manufacturers have installed on the hard drive that will wipe the hard drive and restore it to the condition purchased as a recovery partition.  When you first start and the manufacturer of startup screen appears, look for a message telling you to press a key to retrieve.  Quickly, press this key when the message and follow the instructions to get your computer back.

  HTH,
  JW

• How can I get a Vista installation disc to reinstall Windows.

  new hard drive

  Please can you help me, I had to replace my hard drive in my samsung r70 laptop and din't do back up the drive. How can I now vista back on because I have the sticker under the laptop with the license, but don't drive. Thanks neal walker

  Hello

  Contact Samsung and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246