How can I get the ITC Garamond Bold font

Similar Questions

• How can I get the address of the memory of a table?

  Hi all

  Please bear with me, as this can be confusing. Let me know if you have any questions.

  I have a CCD of Hamamatsu and an external DLL that comes with it that I use. I call the "DcamCapture" function - this sends the capture command to the CCD.

  Its documentation:

  "BOOL DcamCapture (LPVOID pImageBuff, INT nBuffSize)

  [Summary]
  Begins to capture an image of the device.

  [Arguments]
  pImageBuff specifies the start address of the buffer where the image data is
  to be stored.

  nBuffSize specifies the size of the buffer (number of bytes).

  [Note]
  (1) this function emits an instruction to begin to capture the image. Since the image
  capture is not complete even when the function is completed, use the DcamWait

  function to check if the image capture is complete. »

  The "BOLD" is my own. So after that I called this function, I have to call DcamWait. The problem is, from this point, labview has already written the pImageBuff to its indicator variable - in fact, he wrote immediately after the return of this function. But before that data has even written to memory! So I go out exactly what I put in - an empty array.

  In C++, this isn't a problem. What they do in their code for the example is call DcamCapture, DcamWait in a loop, and then dereference the pointer pImageBuff once all this is done.

  I don't know how to dereference the pointer of table in Labview.

  So I have to, as a clumsy hack, call DcamCapture TWICE. I first call DcamCapture, then DcamWait, then DcamCapture again - this time, I use the FCM to dereference the pointer, pImageBuff, which has the correct data (now).

  -How can I get the location of the memory of the pImageBuff? And then, how can I access it?

  Thanks for your help. I called NOR and they 'think' about my problem - I would see if anyone here can come up with a solution.

  You can do this by using the functions of the memory manager of LabVIEW, you call by setting the name of the library to 'LabVIEW' in the call library function node.  The functions you need are DSNewPtr, MoveBlock (which in fact copy of data) and DSDisposePtr.  There are short documents on these functions using LabVIEW.  You need to call DSNewPtr to allocate the memory, switch to the DCamCapture, loop on DCamWait, use MoveBlock to copy this pointer data in a table that manages LabVIEW and finally free the pointer.  Here is an example of a similar sequence: http://forums.ni.com/t5/LabVIEW/array-pointer-from-dll/m-p/1217453#M519958.

• How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  Settings > Notifications > Messages > display on the lock screen

• How can I get the iMovie video files in the photo library?

  How can I get the video files of "iMovie - bibliotek.imovielibrary" in the photo library?

  Is to select your library from the libraries pane and choose my brackets at the top of the screen. Then select the clips you want and share file on the desktop. Then import in photos.

• My update to Apple Watch has suspended how can I get the update?

  My update to Apple Watch has suspended, how can I get the update?

  What do you mean by "break"?

• How can I get the AirPort Express 1 utility generation? I lost mine.

  How can I get the AirPort Express, the utility of 1st generation? I lost mine.

  Open the App Store on your device, then press Search at the bottom of the screen.

  Then type: airport utility in the search field of the screen top.

• How can I get the update iOS 9.3.5?

  How can I get the update iOS 9.3.5?

  Settings > general > software update

• FireFox is no longer crash recovery of open tabs. Management of tab has changed. How can I get the old behavior?

  All my old tabs are missing after a crash. I chose "view my tabs, windows and last time ', like the start option. Many unwanted changes in tab management happened recently. For example when I close a tab in a window of the two tab, I see a blank screen (see picture). Preview display seems to be broken (see attachment). How can I get the old behaviour back?

  After researching the issue, it seems that the problem was a problem of NoScript configuration. After restoring NoScript to the default values, the tab number disappeared.

  Thanks for your help.

  MELL-

  (~ J99) Also note

  mellpell said

  Looks like it's a known problem with Image Tweek:
  http://forums.mozillazine.org/viewtopic.php?p=14029673#p14029673
  https://github.com/CAFxX/ImageTweak/issues/37
  https://github.com/CAFxX/ImageTweak/issues/40

• How can I get the message from thunderbird to stop coming when I opened my email?

  How can I get the message from thunderbird to stop coming when I opened my email?

  Press the alt key to make the call of menu bar
  Select Tools-Options-general
  Disabled the Start Page

• How can I get the 6 digit number to associate my watch.  It doesn't give me a 5-digit number?

  When I try to manually associate my watch it only gives me a 5 digit number, but not the number 6 to complete the pairing.  How can I get the 6 digit number?

  Hello

  When pairing manually, you must press the name of 5 digits on the screen of your iPhone (when he shows the same device name that is shown on your watch, after typed it on your watch's 'i'):

  

  Your watch then displays a six-digit code, you will then enter on your iPhone:

  

  More information:

  Set up your Apple Watch - Apple Support

• How can I get the address book to sort by the name of 'Family' (using v 31.3.0).

  After a computer crash, I had to load Thunderbird (v31.3.0) in my computer running Windows 8.1, and I managed to import my address book backup file in Thunderbird (v31.3.0).
  My problem is that I don't see an option to sort the address book by name of 'Family', which was available with the version of Thunderbird, I had before the crash.
  How can I get the address book to sort by the name of "family"?

  "Address book".
  Select address book
  "View' > 'Show name as' > last/first". "

  You can sort by name.
  Click on the 'Name' column header to change the sort order,
  Reversed, then click on the 'Name' column header again to reverse the order.

  Or
  'View' > ' sort by ' > select 'Name' and 'Crescent '.

• iPhone Sync with PCI trying to sync my iphone to my computer via i-tunes soft ware.  It does give me an option for the phone device. How can I get the phone icon in the menu bar?

  I am trying to sync my iphone to my computer via i-tunes soft ware.  It does give me an option for the phone device. How can I get the phone icon in the menu bar?

  Mac or Windows?

• How can I get the tabs colorful to use different distinct colors for 2 gmail accounts?

  Under Firefox 29.0.1 iMac OSX 10.9.3. I have multiple Google accounts: 2 1 Google Calendar and gmail accounts. Colorful tabs add-on will allow me to choose a color for a gmail account, but it also uses this same color for the other gmail account. How can I get the different colors on 2 gmail accounts?

  In addition, colorful tabs is also the same for my homepage (google.com) and my google calendar. How can I get different colors on these 2?

  Personally, I use 'Fabtabs' for my mozilla FireFox.

  https://addons.Mozilla.org/en-us/Firefox/addon/FabTabs/

  This add-on has problems like that when I use it.

• I reinstalled Firefox Desktop, I downloaded my favorites of Carbonite, how can I get the current Firefox to accept?

  See above

  I reinstalled Firefox Desktop, I downloaded my favorites of Carbonite, how can I get the current Firefox to accept?

  You do backup your bookmark as a .json file?

  Restoration of bookmark

  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• When you press the new tab, how can I get the homepage instead of the history of tiles?

  When you press the new tab, how can I get the homepage instead of the history of tiles?

  You can try this.

  • https://support.Mozilla.org/en-us/KB/new-tab-page-show-hide-and-customize-top-sites#w_how-do-i-turn-the-new-tab-page-off

  Instead of the parameter mentioned pref in about: blank, you can enter any site of your choice.

  Ex: encrypted.google.com