Sierra / problem with network Synology readers

Similar Questions

• macOS Sierra problems with screen sharing

  Hello

  After update to Sierra in two of my Macs, I can´t use the screen sharing. I used to use my second computer using screen sharing, but now, whenever I connect I see the split screen but active areas for use on as sleep, restart and turn off keep its original position. This means that if I like the closing down of the remote computer, I need to press just left... really strange sleep.

  I'm trying to connect to remote VNC Android and the appearance of the screen split also and with the same problem.

  Anyone has the same problem or an idea how to fix?
  Thanks in advance!

  

  Solved!
  Omission of base: after the descent of the Sierra update on both computers, forgot I manually start the.app after the update to the same date (a few minutes before). This cause the problem.
  I launch the.app server run OK and no problem with screen sharing.
  Maybe not to repeat this mistake, but just in case it's useful, I leave my explanation.

  See you soon,.

• Regarding the problem with network controllers

  Hello every1!
  
  I had a problem with the network controllers. I recently installed new windows in my laptop. Ultimate(64-bit) Windows 7 is. Everything was fine, except the LAN drivers. I got a drivers pack solution for drivers. We updated all the drivers except the network controller.

  When I bought my new hp Pavilion g6-1201tx a few years, I had a backup of my DVD players. But, due to virus attack, it has corrupted me n later when I tried to reinstall my windows, I had no option but to the install from the cd of windows 7.

  Now, my problem is that in the notification of networks, it shows that "network controller not installed driver. Even my bluetooth does not detect my wifi personal connection he used to before you reinstall windows. I am not able to find the appropriate driver from the hp site configuration too. His humble request to help me solve my problem regarding.

  Thank you.

  You are the very welcome.

  Here are links to the drivers you need.

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&OS=4063&product=5163244&sw_lang=

  Bluetooth:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101174-1&cc=us&DLC=en&LC=en&OS=4063&product=5163244&sw_lang=

• Problem with network controller / wireless driver

  Hello, I have problems with my computer network controller. I can't connet to the Internet wireless or wired. In addition, two of my USB Ports do not work.

  My system is HP Pavilion G4 - 2235dx

  A6 - 4400M with Radeon AMD

  Windows 7 Professional

  The hardware ID

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C

  PCI\VEN_168C & DEV_0032 & CC_028000

  PCI\VEN_168C & DEV_0032 & CC_0280

  There are other issues such as:

  PCI device

  SM Bus controller

  USB controller

  When you open Device Manager and every thing under "Other devices" are not available, you will get the real picture. Please I need your help to make this work again.

  Thank you.                       David

  Hi, David:

  Here are links to the drivers you need:

  1. first install the amd chipset driver and restart. You only want to use the first file on the Web page.

  This will install the smbus and usb3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  2. wireless card driver is the following:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229464&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118499_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  3 PCI device is the following:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103762-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

• Problems with Network Diagnostics.

  Original title: Network Diagnostics

  When searching on the Windows Network Diagnostics, he said problems found, not fixed.  I have an extended warranty with Microsoft.

  Please fix this problem.

  Carmen Doucette

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  What is the exact message you get?

  I suggest you try the steps from the following links and post us the results of the network diagnostic message you get:

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  When you run Windows Network Diagnostics, any problem found, along with solutions, is displayed in the Windows Network Diagnostics dialog box. If it has more detailed or technical information about the problem and possible solutions, it is saved in one or more event logs. Administrators Network and technical support staff can use the information in the event logs to analyze connectivity problems or help interpret the findings.

  You can see the Network Diagnostics event logs in Event Viewer. The event logs are saved as system events in the Logs of Windows folder, and the event ID is 6100.

  a. open Event Viewer by clicking the Start button, click Control Panel, clicking system and Maintenance, clicking on Administrative Tools.

  b. double-click Event Viewer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. events should be filtered so that only the network diagnostic events can be found.

  To open an event, double-click it.

  In the Description box, problems are labeled as root causes and solutions are labeled as repair options.

  Work with Wireless Diagnostics events

  ·         When network diagnostics identifies a problem with a wireless network, it saves the information in the case of newspapers such as aid of the class of events or information. There may be one or more events by diagnostic session helper class, but one event of information per session.

  Helper class events. These events provide a summary of the diagnostics results and can repeat some information displayed in the Windows Network Diagnostics dialog box, but they can also provide additional information for troubleshooting, such as information about the connection that was diagnosed, diagnostic results and the capabilities of the wireless network and the adapter a diagnosis.

  ·         Information events. These events can include information about the connection that was diagnosed, settings of wireless network on the computer and network, visible networks and routers or access points in range at diagnosis, list of wireless network favorite computer, connection history and statistics of connection as packet statistics and history traveling. They also provide a summary of connection attempts and their status, as well as the phases of the connection (for example pre-Association, association and security configuration) successful, failed or has not started.

  If you have any questions do not hesitate to answer, we would be happy to help.

• Problems with networking

  Hello

  We have a vmware infrastructure still in version 4 on a HP Blade Center works for a few years without problem.

  However, 2 days ago, we noticed the VMS has been very slow. We have reduced the problem of network connectivity, even if we do not find what is the problem.

  On VMS, if we try to ping another server (inside or outside the confines of the blade), it loses a large number of pings. Ping by the ESX host everything well without loss of ping.

  This happens on all esx servers 4.

  On the other servers blades on the same box (blades not with hypervisor installed), we don't see any problems, and they work very well. The affected only blades are the esx servers.

  No changes were made to the environment that could have an impact on the virtualization servers, nor there was any firmware update, patch or sw in this infrastructure.

  Do you have any suggestions on what this could be and how to perform troubleshooting on this issue?

  Thank you and best regards,

  Hi all

  Thank you for your help. We have already identified the problem. It was a problem with the switches on the blade case. Raise them solved the problem.

  Kind regards

• Laptop HP 15-go99er: problem with network and WiFi

  Hey guys,.

  Does anyone know to solve this problem? I recently installed a new windows on my laptop and since then I can see is more available connections. I went to Device Manager and these drivers seems to have problems

  "Network controller"

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280

  ""PCI Device"

  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
  PCI\VEN_1022 & DEV_1537 & CC_108000
  PCI\VEN_1022 & DEV_1537 & CC_1080

  Can anyone help, because I can't seem to find the proper drivers.

  Hello:

  For the wireless card, this driver should work...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127981-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 7174407 & sw_lang =

  For the E/D PCI controller, this driver should work, but you may need to install manually if auto installation does not work.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_136254_1

  If it does not automatically install, go to Device Manager and click the controller PCI E/D in need of drivers.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66899.  Make sure that the include subfolders is selected and the driver should install.  Then restart.

• Problems with networking small office... !!!

  Greetings... !!!

  I need assistance with configuring internbet for my small office.

  I was using a Wifi Dlink router connected to my connection broadband (PPPOE). Everything worked well unless I plan to add a system to my network.
  I was running out of ports and therefore decided to add a new switch.
  now, I have about 6 PC connected to the switch with a straight cable and a crossover switch cable connects to a router.
  I have configured the router to connect to the internet with the gateway like 192.168.0.1
  I used the following configuration with my desktop clients
  IP address: 192.168.0.100
  Subnet: 255.255.255.0
  Gateway: 192.168.0.1
  Preferred DNS: 192.168.0.1

  However, I am not able to share the internet connection on the other PC.

  Please help its critics.

  I solved the problem by myself. All connections are correct, just the router should be reset to zero again.

• Extremely slow WRT54G navigation pages @ 192.168.1.1 - this could be a problem with network card?

  Friend of mine is having the problems of Internet connection on his main PC which is hard wired to the router, it is using Comcast cable (18Mbit) and all of a sudden today the speed fell to dialup speeds, literally, however its ONLY this main with the issue of speed pc, there are 2 other computers connected wirelessly to the router, and they run at full speed during the test on speedtest.net

  Solve the problem, I tried bypassing the router and still have the issue of speed, so I can pretty much rule out the router, but as part of my troubleshooting whenever I try to access the router configuration pages via 192.168.1.1 but it is VERY slow to respond.

  For example when hitting enter after typing 192.168.1.1 it takes about 45 seconds to view the router configuration page, and then clicking on any other tabs takes 30-45 seconds longer to respond.

  So my main question with this post, is it possible that its network card went bad? What would cause really slow access to the configuration of the router?

  The PC is under Win 7 Ultimate 32 bit and Ive tried to run the network troubleshooter, uninstalled the network card in Device Manager / reinstalled the drivers but nothing seems to work.

  I also ran Malware Bytes and the analytical results were clean.

  Any ideas appreciated!

  can you 'borrow' a card? This is the only way to be sure, eliminating hours of trial and error procedures. one of the mega electronic stores is a good source, if it solves your problem you keep the card, otherwise there is the option to return

• A2109 2 problems with networking and an HDMI output

  I had an A2109 for Christmas and have 2 occurring of questions that I need help on.

  1. I was never able to get the HDMI to work. I tried 2 different cables, as well as 2 different TV and when I plug the microphone to the Tablet and the TV, my TV cable don't say no signal source. I got this tablet specifically for the HDMI output and flash support, so I can watch sports on the internet on our main TV.

  2. in the last week or so when I wake up in the Tablet, my apps does not connect to the internet. In the taskbar it shows that I am connected to the network. I open up chrome and you get a DNS error. To solve this problem, I turn off the Tablet and then turn it back on. This happens whenever I wake up.

  I've not being updated to JB again because I don't want to lose the capabilities of Flash

  As I have a follow-up has been able to solve these two issues.

  HDMI: the cables, I bought two bad ones were apparently. I bought another and that he had "snap" in as well and the TV started to show what was on the shelves. How lucky I am with this one?

  Network: Restarted my router and after a few days there were no problem.

• Problem with network interface of Vsphere

  In my interface Vsphere, on an esxi4.1 I see no vswitches and no information, even though in the console, I see this drug ok.

  As I watched in the var and /var/log/vmware/hostd.log I see 3 lines saying:

  Mar 21 14:51:12 pass: [2012-03-21 14:51:12.608 FFDBEE90 error 'NetworkProvider"opID = AD5DBFA0 - 000000 B 7] an error occurred during extraction of virtual switch: interacting with configuration file /etc/vmware/esx.conf error: unlock the ISP ConfigFileLocker
  Mar 21 14:51:12 led: interacting with configuration file /etc/vmware/esx.conf error: I was asked to remove a. LOCK file that I'm not sure is mine.  It is a bad thing and I'm going to fail.  Lock should be released (0)
  Mar 21 14:51:12 pass: [2012-03-21 14:51:12.608 FFDBEE90 error 'NetworkProvider"opID = AD5DBFA0 - 000000 B 7] an error occurred during extraction of virtual switch: interacting with configuration file /etc/vmware/esx.conf error: unlock the ISP ConfigFileLocker
  Mar 21 14:51:12 led: interacting with configuration file /etc/vmware/esx.conf error: I was asked to remove a. LOCK file that I'm not sure is mine.  It is a bad thing and I'm going to fail.  Lock should be released (0)
  Mar 21 14:51:12 pass: [2012-03-21 14:51:12.609 FFDBEE90 error 'NetworkProvider"opID = AD5DBFA0 - 000000 B 7] an error occurred during extraction of virtual switch: interacting with configuration file /etc/vmware/esx.conf error: unlock the ISP ConfigFileLocker
  Mar 21 14:51:12 led: interacting with configuration file /etc/vmware/esx.conf error: I was asked to remove a. LOCK file that I'm not sure is mine.  It is a bad thing and I'm going to fail.  Lock should be released (0)

  In my/etc/vmware, I have a few files that start with ".". # »

  ...

  r - r - r - T 1 root root 0 18 May 2010. #dvsdata.db
  r - r - r - T 1 root root 0 18 May 2010. #esx.conf
  -r - r - r - T 1 root root 170 may 18, 2010. #license.cfg
  r - r - r - T 1 root root 0 18 May 2010. #locker.conf
  r - r - r - T 1 root root 0 18 May 2010. #snmp.xml
  -r - 1 root root 30 T 18 May 2010. #vmware.lic

  ...

  and also the file

  ...

  -rw - 1 root root 39.5 k Mar 21 14:15 esx.conf

  ...

  I would like to mention that on the ESXi virtual machines work, but can not add other elements of networking in Vsphere.

  I have attached a few out of orders for components network (vmknics, vswitches and network cards)

  Help, please!

  I need urgent HELP!

  Oops, you have ESXi but in vmware KB described how to solve the problem for ESX :(

  So that you can attempt to restart management services 'services.sh restart' other options of console - restore previous version esx.conf

• Problem with networking when having multiple virtual machines on a single host

  Since the implementation of ESX 3.5i server on PowerEdge 1850 Server I had network problems. It took a large upstream of the violin - do not do something specific - but finally I could persuate a VM to talk to the outside world.

  Virtual machines have always been able to ping other virtual machines and physical NETWORK card to the host (with a static IP address only), however with a bit of deactivation/activation etc I could possibly get it connected. I have exactly the same symptomsusing the two Windows XP and Redhat, both with VM Tools installed.

  If big, I can get the virtual machines connected, *however * every time I managed to connect a computer to the outside network, she will knock off either a return to the State where I can ping only the other VMs and Teddy.

  I tried them in different port groups as well as in different vSwitches with a separate Teddy, but exactly the same problem.

  I thought it was just my ignorance, however after thorough reading and wasting time trying different combinations, I started to think this is a hardware incompatibility or an ESX installation problem.

  Please please please, if someone can help solve the problem, or diagnose if my suspicions are correct.

  I enclose my last combination of configurations!

  Thanks in advance.

  Run 'show port-security' on the switch and see what you have.  You can also view the current configuration of the port connected to an esx.  A switch will remove any doubt relating to port config differences type.

  -KjB

  VMware vExpert

• Re: problem with network card and display

  Hi all

  I recently got Tecra S11 - 11H.

  A few days windows was updating procedure. After restart external monitor connected to dsub connector changed display Resolution 1600 x 1200 (from a native 1920 x 1080). In my frustration, I tried system restore as windows update creates restore points. There were losses of document in the process, but I was NOT able to restore the laptop to the previous state.
  Using the nvidia Control Panel, I get internal resolution of 1920 x 1080 to external monitor ONLY when toshiba lcd is turned off.

  Now, I have 10 seconds delay between http requests. And that is unacceptable. What are my options here? Update includes changes to the firmware? In the cases where I decide to reinstall Windows 7 all over again with recovery disk, which will fix something.

  Please help me!

  Hello

  > Don't update includes changes to the firmware? In the cases where I decide to reinstall win7 all over again with recovery disk, which will fix something

  N ° it includes any firmware changes. Yes, reinstalling windows with the recovery disc will fix your problems as preconfigured values. In Windows, update option, clear *, Install updates automatically *, you can check the updates yourself and choose to install.
  Before beginning a new installation, remove the installed windows updates recently and download a display and a Lan driver of the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] if it solves your problem, you don't need to perform a new installation. If not, do it.

• PROBLEMS WITH NETWORK CARD

  device: hp pavilion g6

  Serial No.: g6t - 1 d 00

  I have re installed windows 7 Home premium 64-bit and now, having problems connecting to the internet

  I tried Device Manager and its exclamatory markson showing yellow

  1. ethernet controller

  2. network controller

  3. PCI device

  4 PCI simple communication controller

  5. SM bus controller...

  Please send the appropriate links for the download...

  Using HP Recovery will return the computer to factory condition... including the OS Windows7 and all the drivers and software HP Recovery partition. Please use the support of HP recovery, you created when you first you computer Configuration. If you create this media, please see DVD - SP1 de Windows 7 64 b + Supp 2 Recovery Kit or contact official HP, via the Portal Support HP's worldwide, to order a support of HP recovery for your computer.

  IF you try to install Windows from a generic Windows 7 installation disc, you need to install a lot of drivers available from the page of CTO Notebook PC drivers HP Pavilion g6t - 1 d 00

  1. Local Area Network (LAN) Driver Realtek

  2. ??? (Please provide the ID window material)?

  3. Realtek card reader driver

  4. Intel Management Engine Interface Driver (MEI)

  5. Intel® Chipset Device Software (INF Update Utility)

  Please message the Windows Device Manager (text only) "Hardware ID" of all remaining missing or unknown devices, as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Problem with network printing on HP C6180

  It is a strange... I installed the drivers from HP on a new MacBook.  HP printer tools can see the printer (we can see the web services of the printer and can see the status of printer ink) but when I go to print in Word... the document hangs in the coil.

  It seems to be a timeout issue... or a problem of communication... in these events should be... because I see the printer... I am at a complete stop on the way to get this impression of thing.

  Thanks for any help you can offer.

  What type of connection (wired or wireless) network do you use for your printer?

  You can browse internal printer tab Hello of Safari Web page?

  If you can browse your printer, then try to delete the print queue of the printer and add it again.  To do this, since your Mac system preferences, print and application.

  Best regards / Jim B