convert the disk basic dynamic - not an option

Similar Questions

• For a recent funeral where the mourners were mourners came from far and from all directions, I wanted to tag a photo of a card to send an email to allow them to find the crematorium (GPS was not an option for most!). This has resulted in

  For a recent funeral where the mourners were mourners came from far and from all directions, I wanted to tag a photo of a card to send an email to allow them to find the crematorium (GPS was not an option for most!). This has led many dotted lines of drawing and my usual 'technical fudge' draw a regular straight line then DAB the brush with the approximate background color at a regular interval would not be easy with the number of lines to draw. I look in vain for an option for me to do and was about to return to my "fudge" when I found the features of Style / dotted. Asked me if I wanted to replace the current Styles with those of dotted styles. Thas here no explanation of what he meant-Nevertheless, I selected Yes. My first line 'test' was off the card and several pixels wide I would have used - it was released as a sort of cross between an old 1960s DP Punch tape and an offset miniature piano keyboard. Clear and straight to the Styles/Reset Styles, I chose to replace the default style, thinking to be the inverse of the previous question. No luck - two months later, I can't yet draw a regular straight line. Outside re - install, how to return to where I was? I use Photoshop CS4 11.0 er

  Ianjalex

  On the tool Options bar, right click (Cmd + click on Mac, if I recall) button (far left) of the tool presets > reset all tools.

  You'd probably want to chart a path to achieve what you want (with dotted lines). Google or Bing "shot on way photoshop cs4" for more details.

• "Lightroom_5_LS11_mac_5_7.dmg" for Mac update my Lightroom 5.6 (build 974614) but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running OS 10 of Yosemite

  I downloaded "Lightroom_5_LS11_mac_5_7.dmg" for Mac that allows to update my Lightroom 5.6 (build 974614), but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running Yosemite OS 10.10 on a Macbook Pro (retina, 13 inches, end 2012 with 2.9 GHz Intel Core i7 processor).

  Vk2mh looks that the download was not complete or corrupt.  When you download the update from?  Have you tried to download it again?

• Accidentally, I converted all my basic dynamic disks. How to convert in return?

  Hello

  I accidentally converted my basic dynamic disks. Now I am unable to run the system recovery. Please let me how can know I convert this return. I'm not bothered about any loss of data.

  Thank you

  Here are the instructions:

  http://www.SevenForums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html

• I can't play discs or load programs on the disk, the disk drive does not work

  My disc drive won't play music discs, or program.

  Hi shaymoss,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. what happens when you insert the disc in the drive?

  4. What is the number of the brand and model of the player?

  See the Microsoft article below and run them the fixit tool available, check if it works.

  Try the manual steps, mentioned in the article, if the fixit tool does not fix the problem.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Check the status of the disk on the computer by using the Device Manager and after return with details.

  How to solve the problems of hardware with Device Manager

  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/devicemgr.mspx

• Power output during the disk check currently not able to boot to the desktop

  Power output during the disk check.  Now, does nothing.

  I started my system, he said to check the disc. The disk check began, he had run for a while. Then my power is out for a few seconds. Once the power was back on that I tried to reboot and nothing. The monitor shows no info yet. Just black says no signal and turns off. I have no option to boot or anything else besides. What I can do. Thank you

  Hello

  You did it of any material changes or software on the computer before this problem?

  You can connect the monitor to a different display port or connect another monitor if possible and check if it works very well.

  If the monitor is right, it implies that there is a problem with the graphics card or motherboard. In this scenario, I recommend you contact the manufacturer of your computer for help.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD/DVD does not recognize the disks and will not be closed

  original title: problem with tray D

  I use a unit of reconditiioned Dell 8300 with XP Professional system.  The unit was slow and gel a bit so, in one of the slow itls break cycles I insereted in the toolbar an old XP disc I had to front to see if that would help and after I closed the tray I noise loud crash and the tray came out showing broked pieces of the disc. I flipped the unit and hit the bottom and more pieces of the disc came out.  Now the set is not closed.  If I insert a workable disc and maintain status bar tap it will not do anything and a window tells me to insert a disc. Shou ld I try to disassemble the unti to see if there's still some piece or pieces preventing reset the tray? Or is it to say that I'm going to my repairman authorized Microsoft for the rerpair?  E-mail address is removed from the privacy *.

  I'm really sorry to laugh, but this is a funniest post I've ever seen. Apparently you've damaged the device rom (cd/dvd drive) replace it with a new one. They measure less $ $30 .00usd. Furthermore, placing the old drive in the drive xp will not improve the performance of the computer. Looks like you have some malware. I recommend that you post in the section virus/malware of the forum on the link below for a complete analysis. The forum is free. While I could recommend some scanners, I think you need a full inspection.

  Free Forum: repair-Bots Online

• Scratch the disk paths do not stick.

  I see that this place more and more as I opened a project and rendering is on my desk. I know that the location is set in the project settings so I put it to the location where I close, recording and re - open and he goes immediately to my office. It actually crashed my computer because I do not have a very large system on my new Mac Pro disk and it it completely filled and I couldn't even save the project. I work in a building with several rooms and we would like to use always in the same place on our San for rendering files, but it seems that all the time, we'll have to reset this place. I think that there should be the option for a default location that ignores the project settings. It just isn't sensible especially when you have customers who come in their projects and referencing of readers who are not system.

  Hello

  We are aware of the Scratch disk problem and investigate the cause.

  Sorry for the inconvenience. The work around for now, occupies the custom location when you create the project first, then custom path do not forget.

  Hope this helps,

  Peter Garaway

  Adobe

  Premiere Pro

• Fails to start converting the disk #0

  I don't know exactly why its failure. I exceed the min requirements, so I am at a loss.  I have attached the diagnosis if someone wouldn't mind help.

  the short version:

  created vritual machine

  at the level of the clone volume disl blocks #0_partition #1

  Error: Cannot close the eLSD volume #0_partition #1

  TIA,

  William

  This partition is about 30 MB and resembles a utility or a partition of the ESIA.

  Mapping a volume format internal unrecognized type 222 with number 1 of the partition disk 0 to 32 with ID of disk sector #0_Partition #1

  Please do not convert it.  When you perform the conversion, deselect any volume containing a "?" on it in the wizard.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• How to convert the NEF to JPG not dng 3.3 Lr

  With the help of Lr 3.3 for the first time. Have downloaded my files photo as fine nave but then he wants to convert to DNG? It does not give me the option to save in jpg format? Some files I want as a jpg... Can you tell me what to do to get there.

  Thank you

  Choice of the output format is in the export dialog.

  

• Why the first tab is not having option close

  When multi tab open all the tab meet option for closing but when we begin to close the tab to the right and reach the first tab it does not display an option to close the tab

  When you get down to a single open tab, you cannot close this tab. If you want to close this tab, you must close any Firefox window.

• Tecra A9 came with Vista and XP, the disks - but can not activate XP

  Hello

  I have a Tecra A9, it came with Vista Business pre-installed and on a recovery disk. It also came with a XP Recovery disk.

  Part of the documentation in the box suggests that I should be able to simply install XP from the recovery disc. I tried this, but I can't activate XP. I called the number of Microsoft on the activation screens and entered all the numbers, but I then told me that there is an error and I should change my product key.

  My laptop on a a Vista product key stuck on the bottom. So, I seems to be a little stuck.

  The sheet that was in the box says:

  "it's additionall equipped with a Windows XP Professional Recovery DVD - ROM that allows you to easily install this operating system on your own. To do this, follow the instructions on the packaging of the DVD of restoration"

  Usefully, there is no instructions on the packaging of recovery DVDs, I expected maybe a XP product key or something... But clearly not.

  How should I proceed?

  Thank you

  Hello

  Sorry, but I'm a little confused. As much as I know Toshiba recovery image should not be enabled and if you please be so kind and explains what exactly happens when you try to use recovery media?

  On what stage you must enter the product key?

• HP OfficeJet Pro 8600 icon opens the screen on the desktop but does not scan option

  HP Officejet Pro - N911a e-all-in-one printer
  Serial number:
  {Removed privacy}
  Product number: CM749A

  When I opened icon HP OfficeJet Pro 8600 I see no lopnger options to select scan or fax from the computer monitor screen and HP printer assistance does not open.  How can I fix it?

  My solution was to delete and reload the software.  I downloaded the software from the HP support site and installed on my hard drive.  It worked.

• Why the disk check is not complete?

  I foresaw a disk check and received a message that replaced windows cluster bad file 23773 name Windows\software\download\6EC896~\BITE.tmp, but it will not continue beyond 99% in step 4 of 5.

  Any suggestions?

  It is a Dell Insperion notebook.

  Earlier, I got the error message when you try to start in normal error Code 2000-0141, that says to remove and reinstall the hard drive. This means it needs a new hard drive?

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_126A722713F6D0D0E0401E0A55174AE6&isLegacy=true

• The disk check does not not on the external drive

  I am restoring a backup to an external drive, the drive seems to work very well.  However, the backup stops showing communication errors.  The software company was told to run the check disk on the external hard drive.  I click Start and nothing happens.  Device Manager indicates that the drive works properly.  It's just Check Disk does nothing.

  How do check drive working correctly?

  These are the drives on which you were trying to run chkdsk?  If so, the problem may be with the electronics in the case rather than the drive itself.  See, for example, http://www.tomshardware.com/forum/id-1979433/open-lacie-porsche-design-9230-case.html

  So really, they both failed completely at the same time, it's unfortunate and unusual (unless there was some common external factor).

  Although hdtune is a good utility, it might still be useful to check with Seatools (LaCie was bought by Seagate several years ago) - unless the drive makes strange noises when it is turned on. in this case, more you do, the data you will lose.

  Depending on the amount of data is worth to you, it has undertaken is specialized in recovering data on damaged disks.  This service is not cheap.  DriveSaversis probably the most well-known, but there are many others, including one that says it specializes in hard drives LaCie.  Many will give you a free estimate of the costs to retrieve data.  I have no personal experience with any of these companies and none of them can recommend at the expense of others.