How can I get windows update to work for sp2 to vista, I get the error 0800f0900

Similar Questions

• How can I get the error "Unable to start the service" on attempts to run administrative tools (including the Services application) when logged in as an administrator?

  A large number of menu selections is affected, including the 'computer management', 'Event Viewer', 'Services' and 'System Configuration'.
   
  I tried to clean a computer that was thus invaded by unwanted applications and the services that it was unusable.  I applied several sets of Windows updates until it has been fairly stable, then lightened through the Services application services, changing many services 'automatic' to 'enabled' or 'disabled '.  I suspect that some service necessary for the performance of the foregoing has been inadvertently stopped.  (None that he was '' strongly recommended '' or '' recommended '' do not turn off or the description seemed to make a requirement, but...)  I don't know how to confirm this theory, identify the missing service or reactivate a service without the Services application.

  I got lucky.  I called a local, independent computer store.  Their support staff (after confirming that I had an appropriate Windows license) told me that if the computer came with a disk for Installation of Windows Vista, there is probably a partition to start installation on the hard disk, I could get to with a special touch at the beginning of the start-up phase of the BIOS.  It flashed by so quickly that I missed my chance, so I put off the power while trying to boot Windows.  On my next attempt, I missed again (even if I managed to spot the key combination - F11).  But when he arrived at the start-up phase of Windows, he offered me a chance to run the system restore which was banned when I was logged in with an administrator account.  I had to go back a ways, but I found one who would start and was able to complete cleaning of the machine and make it to a usable state.
   
  Thanks to all who responded.
   
  Oh, and it seems (according to my conversation with the service of the local computer store) that my fatal mistake was by disabling the service allowing you to promote its own security.  Apparently an administrator account is not the rights needed to perform most administrative functions without it; If disabling the service gets you into a nearly unrecoverable state.  A hint of that in the description of the service, or even a total ban on deactivation, would be a good idea.
   
  -Kevin

• my windows 11 media will not play songs I paid for and downloaded due to license issue... the link to drm or the update does not work... How can I get the drm to accept this music

  the upgrade button would light up to go to the site because it says that there is an error... How can I get the appropriate upgrade 11 media to block the protection of licenses on those files that have built in accept them

  Hello Gmirecords,

  Thank you for your message.  Please try the link below and let us know if the button to update this site is grey so.
  http://drmlicense.one.Microsoft.com/Indivsite
  If the upgrade button is always grayed out, please follow the steps listed in the link below.
  http://blogs.msdn.com/embedded/archive/2007/07/30/WMP11-DRM-interaction-with-XP-Embedded.aspx
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get the windows update? X8024400A error)

  I did a restore after my pro windows xp crashed now can't do windows update! How can I get the windows update? I get an error from the site Web has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. X8024400A error)

  Please help me!

  I could not download my favorite Antivirus unable to get updates.  Only a few site I couldn't even. It seemed to get worse until:

  I fould a place that gave me these instructions:

  1. Reregister the BITS files and Windows Update files. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • Regsvr32.exe atl.dll
     • Regsvr32.exe urlmon.dll
     • Regsvr32.exe mshtml.dll
     • Regsvr32.exe shdocvw.dll
     • Regsvr32.exe browseui.dll
     • Regsvr32.exe jscript.dll
     • Regsvr32.exe vbscript.dll
     • Regsvr32.exe scrrun.dll
     • Regsvr32.exe msxml.dll
     • Regsvr32.exe msxml3.dll
     • Regsvr32.exe msxml6.dll
     • Regsvr32.exe actxprxy.dll
     • Regsvr32.exe softpub.dll
     • Regsvr32.exe wintrust.dll
     • Regsvr32.exe dssenh.dll
     • Regsvr32.exe rsaenh.dll
     • Regsvr32.exe gpkcsp.dll
     • Regsvr32.exe sccbase.dll
     • Regsvr32.exe slbcsp.dll
     • Regsvr32.exe cryptdlg.dll
     • Regsvr32.exe oleaut32.dll
     • Regsvr32.exe ole32.dll
     • Regsvr32.exe shell32.dll
     • Regsvr32.exe initpki.dll
     • Regsvr32.exe c:\windows\system32\wuapi.dll
     • Regsvr32.exe c:\windows\system32\wuaueng.dll
     • Regsvr32.exe wuaueng1.dll
     • Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll
     • Regsvr32.exe c:\windows\system32\wups.dll
     • Regsvr32.exe wups2.dll
     • Regsvr32.exe wuweb.dll
     • Regsvr32.exe qmgr.dll
     • Regsvr32.exe qmgrprxy.dll
     • Regsvr32.exe c:\windows\system32\wucltux.dll
     • Regsvr32.exe c:\windows\system32\muweb.dll
     • Regsvr32.exe c:\windows\system32\wuwebv.dll
  2. Reset Winsock. To do this, type the following command at a command prompt and press ENTER:
     netsh winsock reset
  3. If you are running Windows XP or Windows Server 2003, you must set the proxy settings. To do this, type the following command at a command prompt and press ENTER:
     Proxycfg.exe d
  4. Restart the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • net start bits
     • net start wuauserv
  5. If you are running Windows Vista or Windows Server 2008, erase the BITS queue. To do this, type the following command at a command prompt and press ENTER:
     Bitsadmin.exe/Reset /allusers
  6. Install the latest Windows Update Agent. For more information, click on the number below to view the article in the Microsoft Knowledge Base:
     949104 (http://support.microsoft.com/kb/949104/) how to obtain the latest version of the Windows Update Agent to help manage updates on a computer
  7. Restart the computer.

  After doing these, well most of them work. When I clicked on OK, but some are not. All of this worked!   I was able to update.  I was about to throw my computer!

  I don't know the tip you give here would have worked more quickly.  I just couldn't not here. Something was originally internet Exployer of do not leave me here.

  I had to work on him. Now everything seems to work very well. I have sort of my breatgh again and wory that error could haoppen again.

  1 million for your help thanks. It's great to have a place like this with pro like you here.  Much appreciated by a non pro like me.  Great place to learn more about computers.

• I have reinstalled 7home premium windows on my computer laptop samsung R540 laptop came preinstalled w/a webcam. How can I get the web cam work?

  I have reinstalled 7home premium windows on my computer laptop samsung R540 laptop came preinstalled w/a webcam. Once windows 7 has been installed, the web cam never came. I ran the update of windows the cam came, but only 2 of the 3 components have been installed. How can I get the web cam work?

  By visiting the support Samsung to get the drivers win7 and app photo, specific to your model.

  But assuming you used all the recovery of the samsung cd driver & the camera application should be installed in any recovery process.

  http://www.Samsung.com/us/support/owners/product/NP-R540-JA02US

  Do not use windows update for drivers, especially drivers for laptop

• Windows 7 Desktop w/printer, my desktop XP in network computer, cannot print bc I wonder for the current print driver, I got a current version, but it does not recognize it? How can I get the printer to work?

  I have a desktop computer Windows 7 connected to an HP laserjet 4050N printer, when I try to print from a computer to Office XP, via the network, I wonder for an updated printer driver.  I downloaded the latest print driver, but it does not recognize the file inf and again requests a current print driver.  How can I get the XP desktop to print on the printer connected to the Windows 7 Desktop?

  Hello

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1:

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=18322&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=25475

  For your reference: How to use Windows XP to share a printer with other people on your network: http://technet.microsoft.com/en-us/library/bb457001.aspx

  http://TechNet.Microsoft.com/en-us/library/bb456988.aspx

  To connect to a printer on a network: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

  Hope this information is useful.

• How can I put Windows Update on my list of programs to make sure that it works?

  How can I put WINDOWS UPDATE on my programs list and how can I make sure that is working

  original title: I lost WINDOWS UPDATE
  Click here: http://www.update.microsoft.com
   
  1. Save the page to your Favorites.
  2. Drag the favorite to the desktop and it will create an icon.
  3. Drag the icon on the Start button and when the menu grows, drag to where you want.

• How can I get the age of Mythology to work on Windows Vista, every time I put the disc in the computer installation screen dosnt pop up and nothing happens

  Moose title: How can I get the age of Mythology to work on windows vista

  every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer

  Hi rew55545,

  (1) is this problem limited only to the age of Mythology disc?

  (2) what version of the game you are trying to install?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  
  Method 2: run the fixit available in the link below to resolve any problems with DVD player.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• I favor creative cloud, with photoshop, I have in the office and at work. One home is 16.1.1 and office 16.0.0 version. How can I get the Office to be updated?

  I favor creative cloud, with photoshop, I have in the office and at work. One home is 16.1.1 and office 16.0.0 version. How can I get the Office to be updated?

  Hello

  Greetings!

  As your IT team to do.

  Concerning

  Jitendra

• How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work.

  How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work?

  You don't need a serial nr for updating a program

  You need the original CS4.0. install and add the series nr. to get the program to work.

  Now you can update to 4.2.1

• How can I get the F1, F2... key to work in Windows XP?

  Hello

  How can I get the function keys (F1, F2, F3...) to work in Windows XP?  I had this working properly before, but I had to reinstall everything, and now it does not work.

  I tried to uncheck the "shortcuts Mac OS', but this causes the mouse to stop working.

  Sincerely, Neil

  Edit: re-read the previous post, I missed the part, you do not have to hold down the Fn key before... Sorry ' end that

  Looks like you just have to switch the toggle autour:

  Apple > System Preferences > keyboard > check ' keys all F1, F2, etc. as standard function keys

  Hope that help =)

• How can I get the Windows 7 Media Center guide to update the channel list.

  I noticed that lists of TV channels in Windows 7 Media Center guide are incomplete.  Not all available channels are appearing.  They disappeared for some time.  I checked the lists online of zapsit and they contain the missing strings.  The program zap2it descriptions are more precise than what appears in the Media Center guide.
  How can I get the added missing channels?
  Keep us on that.
   
  Please also post the questions to
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/114.aspx
  and do not forget to mention the Colossus when you post experts.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• error message received when downloading CC PS I needed to upgrade my display driver.  I've now updated - how can I get the improvements that have been disabled on initial installation?  I use Windows 7-64 bit.

  I received an error message telling me that my display driver was not at the height, & that some improvements would not be enabled.  I've since updated my display driver.  How can I get the improvements that have been initially disabled?

  Thank you...

  If you have all the features you need and there is no problem.  let alone ps.

• How can I get the amount of free disk space using the space using windows 7 Please share example using GetDiskSpace

  How can I get the amount of disk space by using windows 7 Please share example using GetDiskSpace I already studied http://digital.ni.com/public.nsf/allkb/9958B8E473C4EF1786256BBC0053B64F

  Reading your question a little more in detail, I doubt if you are using the Win32 GetDiskFreeSpace API function (including my previous post is the solution) of the function GetDiskSpace from the Toolbox of the programmer.

  With respect to the other, it works even with capacity greater than 2 GB disks, but you must use the appropriate formatting code to display the returned value. I updated my example to display the total of free space in the debug output window and added a comparison with the value of 3 GB using UInt64TypeCompareUInt box to tools programming interface.

• How can I get the update for bios on my Pavillion m9500y UEFI

  System model NC683AA-ABA m9500y

  I installed Win 7 and need W8 but W8 Advisor said that I need the Bios which supports UEFI followed by the v2.3.1 Errata B and has the authority of Certification Microsoft Windows in the UEFI signatures database.

  So, how can I get the new BIOS?

  Dan

  Thanks for your reply.

  You're right, MS Win 8 update Advisor said that I had to have this update to install W8.

  However, secure boot will not work without it. So, since you say that HP does not BIOS update more than a year, it means that this PC does not have a secure boot. Built in obsolescence.  I hope just as malware ladies keep looking for rootkit stuff and do not rely on MS to keep safe.

  Dan