High temperature of the GPU on Satellite P100-108

Similar Questions

• Temperature of the GPU on Satellite P100-102

  Does anyone know the values of normal temperature for the GPU from NVIDIA 7600 Go series? After replacing the motherboard by the service, the GPU reached 82 degrees Celsius (180 deg F) (without executing 3d application) and only the main cooler blows. Under 3D performance he attained values around 100 degrees Celsius.
  The values were obtained with the Everest program!

  Thank you
  Jan

  Hello

  Have you noticed the same temperature before replacing the motherboard?
  AFAIK the P100 supports a clean cooler graphics card.
  Two heat sinks are placed on the map: one for the CPU and a GPU.

  It seems that the GPU heatsink does not work. Why? Maybe the technician didn't properly connect I n don't know
  But try to contact the service guys again I think they should check again before the GPU goes dead

• Satellite A500 - problems with the temperature of the GPU

  The thing is playing Age of Empires online I started having problems with the temperature of the GPU. When you run the AIDA64 the CPU stress test can hold up well, but after 35 minutes the test what AIDA suspended while the GPU fan can't seem to download their revolutions, (I guess that if there was that a rise in temperature would increase the speed of rotation of the fan, don't).

  I consulted the manufacturer of the GPU, nVidia, (the graphic is nVidia GeForce GT 230 M) and tell me to contact Toshiba for other options, since, according to them, the problem is not the GPU.

  Any ideas or suggestions?

  You use your laptop to factory settings?
  Have you installed something that may be responsible for this (non-Toshiba display driver)?

• Is the card in Satellite P100-437 reader also supports format SD HC?

  Hi all

  not sure if the card in Satellite P100-437 reader supports also format SD high capacity?

  Thank you.
  Kind regards
  teo_ost

  Post edited by: teo_ost

  Hello

  Please check this thread for your question:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=99339𘐋

  Welcome and good weekend

• Temperature of the GPU 103C on Latitude E6420

  Hi, I recently started the Test PassMark Burn-In version 7 on my i7-2630QM Latitude E6420 with Nvida NVS 4200 M 512 M card. During the test, I noticed that the temperature of the GPU is about 103C and software reported "Test failure" due to the high temperature.

  The temperature of the CPU is also high, around 93 C.

  Is this normal? I would return this laptop?

  Thank you

  It is a known problem with the E6420 14 "laptop and the Quad core CPU. I have an E6420 and E6520. The E6520 manages the heat much better and higher out of GPU and 95 c 85 CPU when you run Diablo 3 for an hour on the resolution max and max graphics settings.   My laptop comes with the heatpipe heatsink only, he would downclock the CPU because of excessive heat and same judgment. After I got the radiator double pipe with a new thermal pad, my time is up to 100 ° C max on CPU and GPU and cell phone stops is more due to overheating.

  The problem is Dell packed plenty of power in a computer 14 "laptop. When running at load max, the cooling system can not just keep it up. Dell should really fix this, but you can do some improvements on your end. FYI - don't try if you are not comfortable to do this or are tech / mechanical savvy.

  Here's what I recommend:

  1 make sure you have the latest version of the BIOS installed. Dell changed the thermal curves for the fan of the bios updates.

  2 make sure you have the radiator HEATPIPE DUAL DELL P/N - TYP01. My E6420 comes with heatsink tube bad in the photo below.

  One pipe radiator - ONLY for the DUAL CORE i5, i7. NOT FOR i7 QM QUAD CORES.

  Forum.NotebookReview.com/.../564579-E6420-Owners-thread-83.html

  There is a "gap" between the radiator and the Nvidia NVS 4200 M GPU. Dell uses a NOTE from the ADMIN: profanity removed according to the TOU > heat transfer heat pad. many users have done the following to reduce even lower time by replacing the thermal pad with a wedge of copper sandwiched between two layers of thermal paste / compound. I don't know that Dell probably does not support below this mod even if users have reported the lowest time after the mod which stresses in turn of components less.

  3 order the copper shim kit. www.eBay.com/.../260718120394

  4. use a good thermal paste / made up for example ceramics 2: www.newegg.com/.../Product.aspx

  Finally - browse the forums on this site because there is a lot of information on your E6420.

  Forum.NotebookReview.com/.../564579-E6420-Owners-thread-95.html

  E6420

  I7-2760QM turbo up to 3.5 ghz

  16GB DDR3 @1600 MHZ - Yes the E6420 and E6520 will accept 16 GB and run at 1600 MHZ if you buy 1600 Mhz Ram AND have a Quad core CPU RAM supports 1600 Mhz in native mode. You can search your cpu here and look under 'types of memory' for the speeds supported. "The memory of max size" for memory max your CPU is compatible.

  ark.intel.com/.../Intel-Core-i7-2760QM-Processor-(6M-Cache-2_40-GHz)

  500 GB HARD DRIVE AT 7200 RPM

  1600 x 900 HD display webcam w

  Keyboard backlight

  Intel 6250 WiFi

• Replacement of the GPU on Satellite A210

  Is it possible to replace the GPU in Satellite A210?

  As a little faster plugged PCIexpress for example?

  Hello

  What do you do exactly?
  You want to remove the VGA card only or you want to upgrade the GPU with another?

  I think the GPU are removable (means not fixed/welded) but it of not possible to update the graphics card of laptop s. The BIOS would not support another graphics card.

• Satellite P100-108: Question on the form to upgrade XP Home, XP Pro

  Can I put my XP HOME on a TOSHIBA Satellite P100-108/CoreDuoT2300 to
  AN XP PRO SP2.
  Do I have to reinstall the drivers?
  Someone is an expert in the field?

  Good bye
  Dominique

  Hello

  If you want to upgrade the OS to WinXP Pro you must install it from the original CD of Microsoft. After installation, you can use the same drivers Toshiba because the WinXp Home and WinXp Pro uses the same drivers.
  The drivers, you can find on the CD of tools delivered Toshiba or you're going to download it from the page of Toshiba.

  Is very important to install Toshiba stuff in the right order.
  1.) chipset utility
  2.) common modules (if available)
  Driver graphic 3.),
  4.) etc...

  You can also follow the order of installation of the driver Toshiba & Tools CD.

• Order WMI - what command can I use to get the temperature of the GPU?

  Which command can I use to get the temperature of the GPU in WMI?

  Hi Daniel_99,

  ·         Do you use some kind of scripts?

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

   

  I hope this helps.

• Satellite A200-1TP - the high temperature of the processor

  Hello, I have never had a problem with my laptop up to now... I was playing a game when I couldn't play more because my keyboard was raging on the left side.
  I checked the temperature of the cpu and it was 80 c! I don't know too much about temperatures, but I think it is too high.
  I closed the game and he lowered to ~ 60, then I tried a program called orthos to check the performance of the PC while making 400 iterations of lucas-lehmer and it reached 95 C! OK, it's time to do something.
  I tried to format my laptop and see what happpens... On 'high performance', it of about 64 c and on 'power saver' must be between 50 - 55 c, a better way but I think it should be lower. I tried to clean the fan with a vacuum and I think it helped a little... I dare not open my phone because I don't know that I'll break it.
  The fan is not broken, it is running, I tried using 'speedfan' change rpm, but this program does not detect my fan so I can't do anything...
  I don't know why this is happening. I was so happy until now... I would like to repair the laptop, not to buy a laptop cooler, then... what I need to do?

  Thank you

  -Furthermore, the disc is 41 c and GPU temperature is 27 c, I think these are ok.

  Hello

  > I tried to format my laptop and see what happens... On 'high performance', it of about 64 c and on 'power saver' must be between 50 - 55 c, a better way but I think it should be lower.

  No contact, the temperature will not stay if you run applications of high performance as the games for example.
  Running high-performance programs all internal devices must run with max performance which leads to a higher heat dissipation and this leads to a higher temperature

  Of course clean dust cooling modules and debris should help cool the laptop better but it won't change the fact that you will always see a higher temperature, running games

  PS: CPU keeps the temperature of 100 degrees, that's what I found on the Intel page!

• Satellite A100 - I have a negative temperature of the GPU

  Satellite A100
  Negative temperature - 99 of the GPU. NVIDIA go 7600 card.
  Is this supposed to be?

  Hello

  I put t know how you get this value of the temperature, but I guess you used the 3rd party applications that are not certified by Toshiba and I doubt that these tools would provide a good temperature.

  And to be honest, I never heard a negative (less) temperature. For me that's nonsense

• Satellite C660D - high temperature of the processor

  Hello

  I recently had high readings on my C660D-14W its degrees 91 sometimes not hitting all the time mostly between 55 ° c to 70 ° c. I thought I'd take a technician because it might be filled with dust and I m not able to open the case. The strange thing is I have used for about a week or two with these readings high and I did not randomly stop once, what is normal a symptom big for what I m not sure has the size of the money on a technician but I m not ready to use a vacuum cleaner or whatever it is to dust and air it would just push inside.

  I got a quote on out all material and dusting it s no charges, but I really don't know if I have to take it to a technician, if I had no gel or random stops at all the Mr. I had a freeze while I was focusing on the computer at a given time and which has been about 2 weeks since I used it for daily such as ago videos, music and email accounts and no freeze, random stops or random reboots, so what gives. Also, I have noticed a bit of high pitched noise high so I think that the fan has a very low sound problem but I don't know if my laptop has always given this noise m.

  If someone could help me with this it would be great, I can go to a technician in any case because I m worried I will fry the CPU, I think that it of been like playing with fire used in the last 2 weeks.

  Kind regards
  Rine

  Hello

  The temperature of the processor can increase running applications of high performance such as games, videos, etc.
  It is not unusual
  The temperature of 55 ° C 70 ° C is the normal level.
  91 ° C is high, but I doubt that it always seems possibly that this level would be in the case that the CPU would be stressed a lot

  However, the cooling modules must be cleaned from time to time I m very often and I might recommend using a jet of compressed air to get the dust removed.

• GPU on Satellite P100-217 fan never turns on running Linux Gentoo

  Hello

  I am running Linux (Gentoo) on my P100-217 (Geforce 7600). The graphic card fan never turns on, and the GPU gets to a temperature higher than 100 ° C when executing some 3d games. When I boot to windows, the graphics fan does not turn and the GPU is much cooler, running the same games.

  Can someone Toshiba please give me some information on how to solve this problem under Linux.

  Here is some additional information:
  Driver version: 1.0.9755
  nvclock version: 0.80.
  Nvclock message: you the fanspeed adjustment only is not supported on your video card type

  Thank you

  Chris

  Hello

  I'm not Toshiba, but maybe I can help you too.

  Type in the console:

  detection sensors

  and follow the instructions. Maybe you need to compile some kernel modules yourself.

• Replacement of GPU on Satellite P100-216

  I joined this forum on behalf of my brother who lives in Turkey. He took with him to England a Satellite P100-216 laptop.
  He had problems with him and he took to a workshop in Turkey to tell the graphics card needs to be replaced and the installer had problems to make a. He suggested to one of the United Kingdom and next time someone visits, they can take the card to the Turkey. I live in England and also told me of a repair shop here that the card is integrated on the motherboard, and it cannot be replaced, it s not worth repair.

  Could someone advise me if this is the case. If it s not integrated, y at - it another card that would fit. It only play hidden object games, so I doubt that he would need a top spec.
  Any information would be very useful and I thank in advance for the help

  Hi dude

  You shouldn't be disappointed. The forum is a user to user forum.
  If others think they might be able to help then they will post here in this thread.

  > I live in the United Kingdom and also told me of a repair shop here that the card is integrated on the motherboard, and it cannot be replaced, it s not worth repair.

  That s right the GPU is a part of the mobo and if the GPU would be defective, then you need to replace the motherboard. But the new motherboard is not cheap, so maybe better to buy a second hand laptop before getting the mobo replaced.

  PS: as you can see that it is a user to user forum... maybe other users expect a notice from you too as you did too, so to be part of the community and try to help others also...

  Welcomes :) and welcome to our community

• How can I change/turn off the led under the speakers on Satellite P100?

  How can I change/turn off the led under the speakers? (in Satellite P100 (PSPA6E))
  Now I see the light only in the left side, but when I bought the computer left and right led line lights blue under the speakers.

  Gazz's right. It is not possible to switch off the LEDs. If just one LED is on the other must be faulty. Contact the customer Service of your country partner. I'm sure they can disconnect one too if you n t need her.

• How to turn off the blue lights under the speakers on Satellite P100?

  Does anyone know how to turn off the blue lights that lie beneath the speakers on a Satellite P100? They are evil in my sight!

  Thank you, John.

  Hello

  You are a lucky man. This is a very new unit and I wish that I would also have one of the new Satellite models. But you know, the money is the key :(
  However, I don't think that it is possible to put out these fires.
  In my opinion, it is a part of the design of laptops. It seems very futuristically.