How can I know the Essbase database name in Hyperion 11.1.1.3

Similar Questions

• How can I know the FULL domain name & names for the installation of a digital certificate Public in ISE?

  We are implemented a project with Cisco ISE; but comments Portal appears to users as a "untrusted site". For problems, a public digital certificate must be installed in Cisco ISE, so he can send it to users who enter the comments Web portal.

  Now... to sell me the certificate, VERISIGN needs to know settings ISE of the certificate, such as name of area COMPLETE, names subnames, etc... How can these parameters of ISE?

  Thaks a lot!

  This isn't an easy question to answer, there are a ton of variables to include

  Local web site Central Web Auth or Auth

  LWA, the WLC is the "man in the Middle" to the request of the customer for PSN (server nodes), the WLC takes the request webauth and resembles webauth then the redirect URL that you put in the WLC

  If the redirect webauth URL is https://ise01.mycompany.com:8443/guestportal/login.action, the WLC is a redirect but the virtual IP address comes in 1.1.1.1, who was as trustworthy or redirection complains, then you may have to get the public certificate for the fqdn of 1.1.1.1, and the comment server. You can create a CSR using openssl or you can just enter in ISE and create a CSR, but you can only set CN = ise01.mycompany.com and nothing else, as long you have a single NHP is good, but if you have several Ssnp, you need to change your CSR so that you have to use openssl to create CSR using a file openssl.cnf and then with openssl, you do the following:

  openssl req - new - nodes-out openssl.cnf omf-01 - ise04.csr - config

  You must do it the way I said above regardless of CWA or LWA, if you have more than one PSN, you must point to a FULL VIP domain name and then configure your DNS to answer for these host names. With LWA, you get virtual IP WLC involved 1.1.1.1, so you don't have to worry about getting a certificate for this, it is a cleaner installation, but you must always do all the rest. It must ensure that users of your guests have the opportunity to join the portal comments and be able to solve the given DNS the dns server that they have been configured with.

  Content of the file openssl.cnf:

  [req]
  nom_distinctif = req_distinguished_name
  req_extensions = v3_req
  default_bits = 2048

  [req_distinguished_name]
  countryName = name of the country (2-letter codes)
  countryName_default = en
  localityName = name of the locality (for example, City)
  organizationalUnitName = organizational unit name (for example, section)
  commonName = Common Name (eg, YOUR name)
  commonName_max = 64
  emailAddress = Email address
  emailAddress_max = 40

  [v3_req]
  keyUsage = keyEncipherment, dataEncipherment
  extendedKeyUsage = AutClient, serverAuth
  subjectAltName = @alt_names

  [alt_names]
  DNS.1 = guest.mycompany.com
  DNS.2 = guest.mycompany.com
  DNS.3 = ise01.mycompany.com

• How can I find the name of the photographer? How can I know the location of a photo when it's just a general title...

  How can I find the name of the photographer? How can I know the location of a photo when it's just a general title...

  Hello

  If you expand the keywords, this could give you a little more in detail.  You can click on the username of the photographer to see their portfolio and you can search within their portfolio.

  Thank you

  Bev

  

• Tecra A8 - How can I know the temperature of the processor?

  How can I know the temperature of the processor?
  It seems very high. And I'm worried about this.

  Hello

  I m using the Everest Home Edition
  This tool is free and it reports the temperature values NECK and HARD drive.
  In addition, you can find some information about the software installed and inserted material parts.

  See you soon

• How can I know the date of my current windows installation?

  How can I know the date of my current windows installation?

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  SystemInfo | more
   
  It is up.

• How can I know the exact date of the csrss.exe download?

  HelloW please someone tell me how can I know the exact date of the download or installation of csrss on my pc. in the properties of the box, I can only find an old date (date of creation 2009) but think I didn t have this pc so... Please help me

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have questions about the date of download csrss.exe.

  But I would like to know more information, to help you better.

  (1) get any error message related to this csrss.exe process?

  (2) what is the problem in the computer?

  In the meantime, please refer to the below suggestion.

  In fact, the csrss.exe is not a program that can be downloaded, it is rather a process in the Windows System. Thus, it would display the date of creation as the process is being created. Csrss.exe is a system process that is needed for your PC to function properly. It should not be deleted.

  The Microsoft Client Server Runtime Server subsystem uses the csrss.exe. This process of management of the majority of the graphical instruction sets under the Microsoft Windows operating system. As such Csrss.exe offers the important functions of the operating system, and the Blue Screen of Death displayed may lead to his termination.

  Csrss.exe threading and features of Win32 console window controls. Threading is where the application itself is divided into several simultaneous running tasks. Threads supported by csrss.exe are different
  process in this son are usually included in the process, with different threads, sharing of resources within the same process. The Win32 console is plain text window in the Windows API system (programs can use the console without the need for display of the image).

  Additional information:

  Csrss.exe

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_scanning/csrssexe/26bba20c-2691-4D42-bec4-637436c53c4f

  I hope this helps. Otherwise, feel free to write back and we woll will be happy to help.

  Thank you

• How can I know the pop up notice update is legitimate and check the installation?

  How can I know the pop up notice update is legitimate and check the installation? I understand that you have to make sure that all previous updates have been removed before adding a new update.

  no adobe update must be removed or undone to install future updates.

  and what app triggers the popup?

• How can I increase the space of name display in the form, material and specification of the nutritional profile?

  Problem:

  1. How can I increase the space of name display in the form, material and specification of the nutritional profile?

  2. how to increase display space for the name of the sheet in the history section at the top of the screen?

  Thank you

  Hello Nefertari,

  You try to view more characters in these areas?

  Each of these locations is plugable using custom plugin extensions.

  For example, you can go into extensions/config/CustomPluginExtensions file and add the following nodes under the node FormatPlugins.

  I think that the default values for the sites are set to 50 characters, so I had to be up to 100 characters (note NameMaxLength = parameter in the attribute FactoryURL 100).

  It will be applicable to all specifications, if you need something more specific, you will have to create your own class where you can check the type of technique.

  Make your own judgment in what concerns how enough will be the look on the screen after you increase the length to a large number, but you can always control the formatting in your own class.

  See this older post for more information https://community.oracle.com/thread/2562965

  Is that what you're looking for?

  Dmitriy

  .

• How can I know the Position of the column in a table

  Hi all
  How can I know the position of the column in a table...
  For example: -.
  I have a table
  
  DESC EMPLOYEES
  
  EmpID
  Ename
  SAL
  
  I want to know the Empid is in 1st position, ename is 2nd and sal is in 3rd place.
  
  is this possible?

  SELECT *.
  Of user_tab_cols
  WHERE table_name = 'EMP ';

  Concerning
  Arun

• How can I know the size of the screen of the moniter of users using the Acrobat SDK?

  How can I know the size of the screen of the moniter of users using the Acrobat SDK? I need to know how much real estate sreen which is available on the moniter to users. Is there some call I can do the SDK to find out the maximum X and is coordinated?

  Thank you

  Gregory

  Just responded to your other thread:

  AVWindowGetDesktopBounds()

  Even takes into account the task bar on Windows, the menu bar on Mac, etc.

• How do I know the exact database software version

  Hello
  
  Some 3rd third party vendor responsible for improving our EBS R12 of 10g and 11g database, installed 11g on our server software.
  Are simply the software only to a new Oracle home. They did not create a database because it will be used for the upgrade on EBS R12 database.
  The seller also upgrade the Oracle software for 11.1.0.7.
  
  Then attributed to the installation of the patches of interoperability.
  
  When I tried to download one of interoperability. patches which is 7111245, I saw some option/selection for release of data that are
  11.1.0.7.0
  11.1.0.7.1
  11.1.0.7.2
  11.1.0.7.3
  11.1.0.7.4
  
  My problem is that I didn't know what is the last digit in the version that was installed by the 3rd provider third exacltly. And I hesitate to ask them about it
  because they are gone already.
  
  How can I get the exact version of the oracle 11g new home?
  
  
  Thank you very much
  
  Ms. K

  Salvation;

  I'm still confused, do I apply a patch to the Oracle software home only? No database has been created yet.

  Imagine, if you use 10.2.0.1 setup and only install the oracle software that you can apply 10.2.0.4 path to your system that you can create the database using dbca and your version of the database will be 10.2.0.4

  You can also try running the command "opatch lsinventory" (on dbtier) to can see the version of the oracle software, if you do not yet have DB

  Respect of
  HELIOS

• How can I know the progress of import and import when it is finished

  I'm new to Final Cut Pro.  How can I see the progress or the remaining time necessary for my import?  Or how to know when the import is complete?

  Press Cmd - 9 or

  

• How can I change the bookmark/folder names?

  How can I change the name of a bookmark or folder. Focused on aid, I see not a response to this specific problem.

  1. Select bookmarks > organize bookmarks.
  2. In the library window, select the bookmark or folder to rename.
  3. In the name box, change the name of the element. The change takes effect as soon as you click anywhere else.
  4. Close the library window

  Another way to do is with the bookmarks bar:

  1. Choose view > sidebar > bookmarks.
  2. Right click on the bookmark or folder to rename, and then click Properties.
  3. In the name box, change the name of the element.
  4. Click Save.

• What is READ the array returned by the DAQmx meter? How can I know the two functions DAQmx READ data stream in the same WHILE loop?

  I have a question about the order of execution.  In the WHILE loop, I have two things to measure, period and tension using the DAQmx READ functions for voltage and the meter.  In the end, I want to collect these data as points almost simultaneously as possible, as a pair and then send them together to another piece of code (not shown here) which them will result in some sort of command for an engine.  It would be run, and then I want to perceive the tension and the period at a time later and do the same thing.

  (1.) I'm a little confused on what the meter of the READ function is back because it's a table.  What is a picture of?  I thought that it was up to the value of the individual periods between rising edges.  The output of the counter 1 DBL d's a table. How many elements in this table, and what determines the size of this table?  Are the elements of the array the individual delays between the edges?  How many values are stored in the array by executing?   We take the AVERAGE of the last 15 items, but do not know if we are throwing some of the data or what.  How to understand the composition of this painting?  How can I change the composition of this painting?  Is it possible to measure only one period at a time, for example the time between TWO edges?

  2.) Will this WHILE loop execute as it gathers tension and a "period table ' (remains to be understood by me) by TIME running in a loop?  In particular, we want that the value of the tension associated with the value of the AVERAGE of the period "array", so we can use two data items to create orders of next control every time that the two values are reported.  The structure for the delivery of vi will be attached data in pairs like this?  I understand that one of the READING functions run not before the other function of READING in the WHILE loop.  I want that the period "means" and "strain (Volt) collected at the same pace. This vi will he?

  Thank you

  Dave

  Hi David,

  I suggest including the DAQmx Start Task function. If it does not start before the loop, it starts the loop and work very well, but it is not as fast and efficient. In the model of task status, task wiill go to run the checked each iteration of the loop and then back the time checked running when it restarts.

  The status of the task model: http://zone.ni.com/reference/en-XX/help/370466V-01/mxcncpts/taskstatemodel/

  Kind regards

  Jason D

  Technical sales engineer

  National Instruments

• How can I know the number of columns in a TYPE?

  Hello

  If we have a guy like below

  type vc_arr2 is table of the varchar2 (32767) index directory.

  How can I get the number of columns?

  Minoo.TK wrote:

  Hello

  If we have a guy like below

  type vc_arr2 is table of the varchar2 (32767) index directory.

  How can I get the number of columns?

  It is a type of associative array definition. A table has no columns. It is a collection of elements (variables or values). An array location is usually called a cell.

  The standard method Count() exist in Oracle for all table types.

  As for the definition of the table, as in structures, variables make the table contain - associative array is defined in the PL/SQL code and does not exist in the layer of metadata to the database as a new user-defined type. For the definition, you must read the declaration of PL/SQL defining the table.

  Note that there is very rarely the need for associative tables in PL/SQL - 99% of the time they are used without any idea as to what as a table associative is also.