How can I recover Favorites and passwords after a change of operating system and older programs are listed in a windows.old folder?

Similar Questions

• How can I recover my administrator password

  How can I recover my administrator password

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• How can I recover the Photoshop 8 after system recovery? [was: bkupa]

  How can I recover the Photoshop 8 after system recovery

  Reinstall it properly:

  Direct download links for Adobe software

  Mylenium

• How can I recover cd and OS.

  Hi Tema,

  I lost my OS in my laptop and not having a backup.

  I don't have a recovery cd

  How can I recover cd

  Please suggest me.

  Thank you

  Chavigny.

  lenovo1_10 wrote:

  How can I communicate with people of warranty service?

  http://support.Lenovo.com/en_US/detail.page?docid=PD008370

  then select your country in the drop-down list.

  HTH.

• How can I recover my music library after my hard drive

  My hard drive crashed. How can I recover my music that I can restore the library on my pc?

  See recover your iTunes from your iPod or an iOS device library (or purchase history).

  TT2

• How can I recover an iMovie video after the accidental deletion of iMovie?

  Hi all

  I got a file from an old iPhone on my iMovie app and then accidentally deleted the application itself. How can I get the video?

  He is not on any backup so I'll need to find it on my Mac.

  Thank you

  The file itself should always be on the hard disk.

  If you know the name of the file, try to use Spotlight to find it.

  Click the magnifying glass icon top right of your screen type the file name.

  The basics of the Mac: Spotlight helps you find what you are looking for

  If you can't find this file name, try a format iMovie such as DV, MPEG-4, MPEG-2, MOV and M4V

  http://www.faasoft.com/articles/iMovie-file-formats.html

• How can I recover the administrator password?

  I have a Dell Inspiron 1545, and the program is windows vista.
  I remember never perform an administrator issue and my account, the only account on my laptop, is a limited user.
  so therefore I can't upload or change anything without this password, please help!

  Hello

  · What is the number and the model of the laptop?

  You can check the link below: what to do if you forget your Windows password: http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-you-forget-your-Windows-password

• How can I recover no. Diplay after failed Bios update BIOS?

  Compaq Presario F768WM

  BIOS before 30EAF05

  Has been updated to 30EAF0A

  I tried to make a start with HP-Tools UEFI USB recovery but not sure what to put in what folder to try to get it fixed.

  Is there the detaied instructions on how to prepare your bios on the USB files? I tried Crisdisk. I tried a USB bootable to Windows 98 with a file autoexec.bat and phlash.exe with 30EAF05.wph to try to recover the BIOS that was on it. But I don't know if he does something because I do not see what show. I do the key win + B and the USB light, blinks several times then turns on or turns off according to which usb I use.

  Any suggestions? I hope that this is not hopelssssss!

  I finally get it! I used a floppy usb and Crisdisk and managed to do its stuff. Now have a fully functional laptop again. A big thank you to all who help out. Solved

• After you have created the shotlist, how can I reformat available traditional scenario after a change?

  is it possible to reformat a shooting script in more than one layout of standard script, because...

  If you rewrite the dialogue, action, any part of the real-world scenario, then want to print in the layout traditional scenario, how?  My 106 page script became 180 pages when I started shooting script and went from there.  How can I get this back to its traditional format - no comments, shots, etc.

  We understand the frustration, and I think that I have a work around for the problem. You must use a different template (attached) so that there is enough space to fit the lines of the camera.

  • Save the file shootingscripttemplate.xml to your local disk
  • Open a film script
  • Click anywhere you want to add a
  • Go to the menu of the production, and then select Production-> camera shot
  • In the confirmation dialog box, choose the option "continue without saving a version". Click on continue
  • Enter information about the shooting, and then click ok
  • Note that the format of script has changed and your photo is displayed on the left. (see page 1 of the PDF)
  • The menu view deselect the option Unit pictures (Page 2)
  • Now, go into the Menu Edition and select Edit-> model
  • Choose 'Film' model in the menu drop-down to return to the original, formatting of the script with the plans of camera in there but not visible. (page 3)
  • Your script should now look similar to page 4 of the PDF file
  • Choose Edition--> model again and now import the model attached shooting script so that you can view the same script as the shooting script.
  • The imported model will be the automatic loading values in the model.
  • From the view menu and select the option from the camera . Your script should now look similar to page 6 of the PDF
  • Switch between templates when you want to work on the camera shots and when you do not.

  You can add the shooting script template to your favorite by designs:

  1. Switch to the display of the projects
  2. By clicking the new button on the top right of the screen
  3. Select a movie script in the menu drop-down.
  4. Click the button change the model, Page 8 of the PDF file
  1. Now, click Import and select the model of shooting script in your player. Click OK, then ok again
  2. Click Cancel
  3. The shootingscripttemplate is now available in the drop-down menu when you go to Edition-> view creating a script model.

  I hope this helps.

  -Anubhav

  Anubhav Rohatgi

  Senior product manager

• How can I get the installer for my application check the operating system type and then install the correct driver type?

  I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.

  Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.

  Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.

  Thank you
  Joe

  So, I make it work!

  The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:

  http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.

  It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.

  According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.

  It turned out to be as simple as that.

  I hope this helps someone.

  Joe

• How can I "Factory Reset" and still keep all the updates of Windows (2 black)?

  Guys, is there a way to 'factory reset' (removal of virtually all programs, data and personal data/information) but still keep Windows 8.1 on the Lenovo updates Black 2?

  Dear tubers

  Welcome to the community of Lenovo

  Unfortunelty the reset will delete all updates despite the backup files if you chossed keep my files

  Please let me know

  Thank you

  Alaa

• Can I put molten automotive leave after my Vista guest operating system stop?

  I use a single operating system to prompt with my Fusion facility.  Is Windows Vista.  Usually, I use the Vista environment a few minutes each day to run Quicken.  So I don't want to have Fusion it running all day or anything like that.  Ideally, I would like to be able to launch the VM in Vista, do my job to Quicken for a few minutes and then stop Vista and then it automatically also have stop and exit merger entirely.  By default, the virtual machine stops and let me melt which I must then also release the mouse or keystrokes.  Is there a toggle to implement the merger while it automatically closes after the last VM running is stop or something like that?

  A quick way to stop the virtual machine and exit the merger is:

  Go to the VMware Fusion menu-> preferences... Select when a virtual machine is closed: power off the virtual machine.

  Then, when you want to close the virtual machine and quit the merger, just command + Q or VMware Fusion-> quit VMware Fusion.

  Your virtual computer will stop and Fusion will automatically exit.

  It will be useful.

• How can I recover my WPA password?

  Hi - I'm slowly losing my sanity.  Yesterday, my HP Photosmart 110 wanted to install the update to enable messages to be sent wireless.  Installation took place without problem.  Today button blinks and the printer asked me to add the wireless network - I did.  So, my phone crashed so I unplugged the network printer thought that had caused the problem.  Laptop recovered so I tried to add a new wireless network, but he keeps asking my my WPA password.  I have forgotten this and cannot find how to reset or recover it.  Help please!

  Hi smartlady02,

  You can use the utility on the link below to get your password WPA on your laptop.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-96434-1&cc=us&DLC=en&LC=en&JumpID=reg_R1002_USEN

• How can I recover pictures and videos that were removed with the passage of my and replace the task?

  Recently, our computer has been acting and in an effort to save our photos and videos my husband transferred to SD cards and burned some on CD. Then after resetting the computer it has recharged the BUT... when he did this... he does not keep em organized the way I did when they were still on the computer. In the search for some video, I noticed some of our photos were dupilcated on duplicated... especially a certain folder. SO I thought that the file I opened was a reproduction of files in the other... so I made the move, and the button replace and I could have accidentally deleted videos that have been appointed to the same thing, but are totally different. Is there a way to get back them in return? I could doing photos but videos that I want to get them back. If something you can suggest I would appreciate it a lot. Thank you!!

  Recently, our computer has been acting and in an effort to save our photos and videos my husband transferred to SD cards and burned some on CD. Then after resetting the computer it has recharged the BUT... when he did this... he does not keep em organized the way I did when they were still on the computer. In the search for some video, I noticed some of our photos were dupilcated on duplicated... especially a certain folder. SO I thought that the file I opened was a reproduction of files in the other... so I made the move, and the button replace and I could have accidentally deleted videos that have been appointed to the same thing, but are totally different. Is there a way to get back them in return? I could doing photos but videos that I want to get them back. If something you can suggest I would appreciate it a lot. Thank you!!

  ===================================
  If you saw a dialog box that says something like...

  The folder already contains a file named? MPG

  You want to replace the existing file

  ????. MPG

  with this one

  ????. MPG

  Yes No

  If you choose... Yes... the new file overwrites (replaces)
  the original and the original will be not recoverable.

  I hope that the files are still available on the media you
  used to copy the previous location. If they
  ... you can download them again.

• How can I recover my backup password because I forgot it on my HP laptop?

  I forgot my password to my HP laptop backup. When I hit reset password and Password Wizard turns on, I struck then and plug my USB drive but it tells me to enter the password reset disk. (WHICH I DID NOT). I put a new cd - r disc and it tells me that there is not a disk valid! Help! What should I do? I need to get this going as quickly as possible to retrieve my notes for the work at the end of the week.

  Jimmy,

  If you are referring to login your account password, a password reset disk is something that cannot be made in advance.  You can not retrieve or reset your existing password if you already have a password reset disk or written the password down somewhere unless you have an additional account on the computer that has the power to Admin-level at which case you can use it to reset the password for the account of the problem.

  In this forum, no one can advise a remedy except reinstalling Windows.