How can I submit a bug report?

Similar Questions

• How can I write a bug report?

  I have the message asking me to write a bug report. The message reads:-flight from the world. The following World leaks have been detected (the check is performed when all browser windows are closed) Javascript global objects $. Please write a bug report about it, and steps to reproduce if possible.

  I am running Mac OSX El Capitan version 10.11.3 and Safari version 9.0.3.  What is a bug report and how do I write one?

  You can use your Apple ID to register on this site and go the Apple BugReporter. Allegedly, you will get a response if you submit your comments.

  Comments via Apple Developer

• How can I create a bug report? -Key Shift stickiness

  I have frequent problems in Fusion, where the keystrokes inside the VM frequently enter the State where they are all becoming control keys. For example, type "quit" returns in the application within Windows as ^quⁱt.

  As you can see, it makes work in the virtual machine near impossible, because the difference between Shift keys and rays causes intolerable failures.

  Sometimes I can clear the problem by activating / disabling the mode of the unit. Most often, the problem occurs in Unity mode and out of this fashion helps. But sometimes the problem occurs in normal mode, and twice switching modes, and then help. Other times, there seems to be no help at all, and the virtual machine becomes unusable.

  The problem does not only with the key "control-sticky" but sometimes as a key "shift-sticky", or "inverted the upper locking button."

  My questions:

  1. How can I report this bug likely?

  2 is this a known bug?

  These conditions may occur if the client and the host of the keyboard state get out of sync.

  Keys stuck, try to press the change affected several times. A reversed, capslock key try the Virtual Machine > touch send > caps lock.

• How can I submit a feature request? This page is broken:

  How can I submit a feature request? This page is broken: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform & promoid = EWQQL

  Go here: report Forum official feature request/Bug and you will see the box at the top of the page to add a new thread (a thread 'idea' is equivalent to a feature request)

• How can I submit photographs when you use imessages

  Just bought a MacBook Pro of the retina and I try to send pictures and graphics in imessages. How can I submit photographs when you use imessages.

  On Mac in Photos app, select picture, and then click

  (top right)

  Select Messages, then select the recipient, and the text you want included.

• How can I get the classic report value when I click on the record?

  Hi all

  I have a simple classic report and I want to get the empno when I click on record. For example, when I click on record 1, and I'll go '7369', if I click on the 3 card, and I'll go '7521'. How can I do this? Please help, thanks!

  

  Hi jane.kuang,

  Jane.Kuang wrote:

  Thank you very much!!! Your message is useful for me. But this javascript has something wrong. When I click on the first time, the empno appears only once, but when I click on the other record, empno appear twice, and I click on the third time, it appears three times... I'm new to JS, I don't know how to fix it. Thank you!

  Use instead the dynamic action to that effect.

  Here are the steps:

  • Change your region classic report-> section 'Attributes'-> 'ID' static-> give an id say myempregion static
  • Create a dynamic action with the following attributes:

  Event: click on

  Selection type: jQuery Selector

  jQuery Selector:

  #myempregion table.uReportStandard tbody tr
  

  Action: Run the JavaScript Code

  Code:

  var empno = $(this.triggeringElement).find('td[headers="EMPNO"]').text();
  alert(empno);
  $('#P21_X').val(empno);
  

  Items concerned: keep it unselected

  • Change once created, your dynamic action-> go to section 'Advanced'-> set 'Extended event', 'dynamic'.

  This will fix the following in the code of the Para:

  • The jQuery Selector used by Para to trigger the click event is bad. This will fix the multiple alerts.
  • Para code won't work on loading the page, but if there are many rows in the table and pagination for the report is in place, and then when you paginate your report, it will not work. But it will work with dynamic action 'Scope of the event' the 'Dynamic' value even when you paginate the report.
  • Finally, most of the dynamic interactions page must be converted to dynamic actions, this will help the maintainability of the code, instead of stacking the javascript in your page.

  Kind regards

  Kiran

• How can I submit a simple application with two folios of device?

  I created two folios separated for one application, one at 960 x 640 for the iPhone 4 and the other at 1136 x 640 for the iPhone 5. I have been in charge of the search and search and can not find a source that describes the workflow for the presentation of these as a single (two interpretations of the same application) application to Apple via iTunes Connect. I just want to know what to expect what I can be quite ready.

  I have successfully submitted an iPad app, so I'm familiar with the step by step for it, but I guess what I'm asking is how will be foregoing this process of change? I know that I need a Pro license, I'm going to buy in the next few days, but in the past, how can I make these such that the user will receive the correct version for their device when downloading on iTunes?

  Thanks for any help!

  Steve

  I belive that your confusion comes from the difference between making a simple editing application and a multi-question application. The store don't know or what device you have supported, and the store does not "send me the report l / h/proper resolution for my device.

  By making an application multi-probleme for the desired scenario (a folio for iPhone 4, one for the iPhone 5) you publish the two folios/free public or public/retail in Folio Producer for one account DPS. Then you make an app in App Builder that points to this account. This unique application to Apple.

  After the application is installed and run us (DPS) detects the device screen size and display in library view right folios to the player based on what is published in the account associated with this viewer.

  Neil

• How can I submit my PDF form in mail?

  I just finished a PDF form with a shipment by e-mail button, I was able to establish the identification of email, but when I press the Submit by E-mail button, it attaches an XML. How can I make LiveCycle Designer save the form in pdf and attach it to the identification of email set? Help please

  Save your form in LiveCycle and open as a professional.  Using the Advanced menu drop down choose, extend the functionality of Adobe Reader. .  You will get a warning message that includes the following note - "once the active player, certain functions, some functions such as changing the content of the document or inserting and deleting pages is limited." Read so you are sure it is what you want, and then choose Save now.

• How can I submit a new provision on keyboard for Windows?

  In 2004, I created a keyboard for input of Pali and Sanskrit transliteration mapped than ISO-8859-1 (SBCS). Now, it is popular among users of Pali. How can I give it to Microsoft?

  Thank you

  JC

  Hi ahangama,.

  We recommend that you contact Microsoft Customer Service and Support for more support options.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to submit a bug report?

  Hello
  
  The question is for Adobe staff - which reported a bug submission process?
  
  Thank you!
  
  Kind regards
  Dmitri.
  
  
  
  

  Sweet. Thanks, Drew!

  PS 24000 bugs in the system... Something is VERY wrong here. Just to compare PHP bugs database has only 38000.

  See you soon,.
  Dmitri.

• I found flaws in all of the calendars and the scientific calculators of Apple products. How can I send you my report pages 20 as a matter of course. Who should I go. This is a real case, and I am willing to work with Apple on this issue.

  Dear Sir/Madam,

  Topic: Default in some Apple products (important issue).

  This is not an unsolicited idea or suggestion (Please read)

  First of all, allow me to introduce myself as a teacher of mathematics, with more than 20 years of experience in the teaching of mathematics in Jordan.

  I take the liberty to write to you on a very delicate issue regarding the above topic. I'll try to be direct and fertilizers to point.

  Eight months ago, I have established contacts with the customer at Apple and succeeded to in explaining my intention to work with Apple on the flaws I found in all the following Apple products:

  -Scientific calculators built into the Apple iPhones and other products like Mack book pro (13 keys/operators applying bad mathematical concepts).

  -Calendars integrated into Apple iPhones and iPads (after a certain date).

  -Most of the calculators downloaded on Apple iPads (application).

  With my main concern during the final user, I already have reports submitted to Apple on the six keys with solid evidence and evidence supported with excerpts from various reliable resources that are no doubt as to the failure of these keys. I also presented copies of the date on which the calendar goes off track.

  Now iPhones for new generation of Apple (6s and 6 s-Plus) have already been launched on the market, keeping the same flaws, I decided to start contacts with Apple once again, hoping to succeed in reaching the right people at Apple to continue my rage in finding that the right to address this issue. I hope that you will respond positively.

  My worries and concern are oriented towards the end user and, in particular, students who take the responses of these calculators for granted when they are wrong and they don't realize.

  I have prepared a 20 page report although detailed on these defects and how to correct function solid evedence of reliable math textbooks. I'm ready to send this report to the person/department concerned, on which they can check and verify my claim with any or all of the following:

  ·       Apple/mathematicians engineers.

  ·       The mathematics books that are published by well known/good reputation

  publishers.

  ·        Calculators Casio or TI as the most reliable calculators in the world.

  ·        Reliable sources of mathematics of the internet.

  ·        Presentations power point math on YouTube.

  .        Math teachers well known working in renowned universities

  ·        American Mathematical Society.

  I reiterate my willingness to cooperate on the question above so that the genetions coming Apple products will be free by all means!

  I look forward to your positive reply,

  Sincerely,

  Nael

  < personal information deleted by host >

  This is a user to user forum.  Your message must be addressed to the Apple company.  Maybe a letter to Cupertino, California, is in order.  Your letter will receive no valid response here about your concerns.

  Ciao.

• How can I submit my application?

  Hello.

  I use Adobe Flash Builder Burrito to program my ActionScript 3.0 application. I tried to sign my app with Burrito, but it is not well signed.

  So, now I'm signing my app of CMD, but I don't know how I have to submit my application.

  The app folder, I have the following files and folders:

  . Settings (folder)

  bin-debug (folder)

  CBC (folder)

  .actionScriptProperties (file)

  . Project (file)

  Inside the bin-debug folder, I have a file bar. Can I use this file to sign?

  If I have the package by myself. I have a folder (named active), with subfolders containing images and xml files. How do I add current folder to the file?

  Thank you.

  Hey,.

  OK, so here's what I found (pretty cool btw). On the note of use the debug SWF file the session is probably not a good idea because it will always contain data of debugging in it.

  Now when you export your release build, you've got a .bar file and a .sig in your project straight root directory? Here's what you do. You can skip the whole packaging part in my instructions as Burrito has already done for you. All you need to do are to lines to sign file bar which is where:

  "/Applications/Adobe Flash Builder Burrito/sdks/blackberry-tablet-sdk-0.9.3/bin/"blackberry-signer -verbose -cskpass "mypassword123" -keystore "/Applications/Adobe Flash Builder Burrito/sdks/blackberry-tablet-sdk-0.9.3/bin/output_file.p12" -storepass "mypassword123" MyApp.bar RDK
  

  and finally:

  "/Applications/Adobe Flash Builder Burrito/sdks/blackberry-tablet-sdk-0.9.3/bin/"blackberry-signer -keystore "/Applications/Adobe Flash Builder Burrito/sdks/blackberry-tablet-sdk-0.9.3/bin/output_file.p12" -storepass "mypassword123" MyApp.bar author
  

  This will sign your file bar. Make sure you now it comes to the bar file that you got from the process of export and not the bin-debug folder. Also keep in mind that you can also leave the box asking you to sign your application in the export process. It will produce and unsigned bar file you can register via command line.

  Now, all you need to do is recover your .p12 certificate burrito created for you to follow the steps above. which system you use in function can be in a few places. Good luck!

• the windows Security Center detects is not the system of anti-virus protection on my computer. How can I fix this bug?

  I've just updated ESET Smart Security 5 level 6. This update caused a security alert Windows informing that no antivirus program can be found on my computer. I don't have this message while ESET 5 worked... I would appreciate any advice on how to fix this bug.

  I am on Windows 7

  Hello

  Thanks for keeping us posted and share this information with us.

  I'll get to see the steps-

  (a) click "Start", type "Services.msc" (without the quotes) and press "Enter."

  (b) locate the "Windows Management Instrumentation" service, right-click on it and select "Stop".

  (c) navigate to-

  C:/windows /System32 /wbem /repository

  (d) delete the content.

  (e) now perform steps of one) to b), but this time restarting the service.

  (f) check if the problem persists.

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• How can I create a logic reports OLAP Cube in AWM

  Hello

  I created several cubes, but now the client wants to have a cube created report so that we can report in a cube. Can someone tell me please to some guidance on how to create a logical cube.  Thanks in advance

  Its a simple idea... a bit like a layer of sql-opinion on the data stored in sql tables.

  I just tape a few points quickly.  If you do not understand it, feel free to post more questions.

  Lets say, you have the following stored cubes where data has been loaded and grouped.

  Designed by DIM1, DIM2 and DIM3, DIM4, TIME CUBE1 (with stored measures meas1x, meas1y, meas1z)

  CUBE2 (with meas2x, meas2y, meas2z stored measures) designed by DIM1, DIM3, DIM5, 6 TIMES

  CUBE3 (with meas3x, meas3y, meas3z stored measures) designed by DIM1, DIM2, DIM3, 6 TIMES

  Now you create a cube considered, lets call it RPT_CUBE

  RPT_CUBE must be dimensioned by all dimensions. This is the important point.

  It will be only calculated measures, NO measurement stored.

  Create a base (calculated) measure in RPT_CUBE that points to a stored measurement.

  So, for the stored measures 9 above, you will have 9 measures calculated in RPT_CUBE.

  Other measures (such as time) will be created by using these basic measures in RPT_CUBE.

  The properties LOOP_DENSE and LOOP_VAR parameters are critical for each measure in RPT_CUBE.  Often that's correct, but I have seen cases, when it is not set correctly, so I had to manually fix these two properties for measurements in my RPT_CUBE.

  When you query RPT_CUBE measures, make sure that WHERE the conditions are met for all dimensions.

  The value of the dimension of topancestor of a hierarchy, if it is not necessary in the query.

• How can I submit form data to an external url after a purchase?

  I use BC as part of a site that sells certificates of people will buy ecommerce.  There's a developer outside creating PDF certificates with their info and a custom code.  Anyone know how I can submit form data to an external url purchase?

  Two ways.

  To move cross-site restrictions:

  -In javascript dynamically create an iframe hidden, copy the data from the form in this iframe, set on the iframe onload event, submit the form (in the iframe), once the iframe loaded, submit the form BC as usual. Google there should be examples out there.

  -Using JSONP to do the same thing, but this will use GET so that your data will not be encrypted at all (maybe it's not a concern for you and you will need to check if the outside developer making the PDF can handle this response).