The problem that I have for a week, it is that my screen is fine when the laptop is plugged in but fades when it is not plugged in.

Similar Questions

• Windows removes the internet conntction system. Connected directly to the modem. Have tried to go through just wifi. the same problem. Only happened for several weeks.

  Windows deletes internet conntction after a few minutes. The netgear and control panel says I'm always connected. Must reboot to get reconnected to the windows system. Connected directly to the modem. Have tried to go through just wifi. The same problem. Only happened for several weeks.

  Hi Sailortdt,

  Welcome to Microsoft Community where you can find the answers related to Windows.

  According to the description, it looks like you are facing a problem with network connectivity.

  It would be awesome if you could answers to these questions in order to help you further.

  1. have you made changes on the computer before this problem?

  2. you receive an error message or error code?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Hi, I have adobe CC for teams, a member of the team has problems, opening indesign, asked for a serial number, ive checked on our admin account and it is one our our registrants 'members '. I was not the person who created this original so I'm a little

  Hi, I have adobe CC for teams, a member of the team has problems, opening indesign, asked for a serial number, ive checked on our admin account and it is one our our registrants 'members '. I was not the person who created this original so I'm a little lost, I can't seem to find the serial numbers on my account and it seems like we don't have the qualified products? can you help me?

  Hello

  We checked the details of your team, all seats are assigned correctly.

  Now, there are a few details that we need in a private Message so that I can help you properly.

  Name of the user:

  User email:

  In the meantime, try it out below mentioned links.

  • Creative Cloud applications ask for serial number
  • Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  [Note: the details we need is critical, make sure you send by private Message only.]

  Thank you

  Atul Saini

• On my iPod Nano 7th generation, there are some artists who are not listed, although their songs are on the iPod. For example, I have two Blue Oyster Cult songs on the iPod and they show, but Blue Oyster Cult is not listed under "artists".

  On my iPod nano, 7th generation, there are artists who are not in the list of "artists". For example, I have two Blue Oyster Cult songs appearing under "Songs", but Blue Oyster Cult is not indicated under "artists". Is it possible to have the COB and other artists who do not appear to show up under the "artists"?

  See Missing artist or Album not with others by the same artist.

  TT2

• Digital inputs only noisy when the laptop is plugged

  I had problems with loops of Earth and power supplies for laptop in the past.  But it is the first time I got it so wrong that it makes the digital inputs which are both related to the ground and the debounced software cannot be used.

  It is NOT material OR.  It's a DT9816 of data translation, a USB DAQ Multifunction with small budget.   The laptop with the problem is a refurbished Dell, with a very obvious not Dell PSU who throws to the top of the warning in the BIOS and scales back from the processor.  (Danger Will Robinson!)

  The problem with the digital entries shows only upward on the Dell when it is plugged into a power outlet.  On all other machines and with the printer unplugged Dell, digital inputs floating.  But those that I have attached to the Earth is rock solid and work very well.

  What surprises me is more than the noise is so bad that even tied to the ground with a half second debounce, I get always false triggers.  I have not brought to power, but considering that it sounds really loud, I suspect that it looks pretty bad.

  I think I'll try a powered USB hub.  If this does not work, then I think that the customer will have to replace the power supply on the laptop.

  However, I was surprised.  I used a lot of USB DAQ hardware, and it's the first time I've never seen a problem like this.  The NI USB 6002 I tested on this same laptop does not seem to show the same problems.  Even if it is true that this is a different software and the test was brief.

  I'm curious to know if other developers have found something similar in the past.

  I can confirm that using a USB hub external powered eliminated the problem of noise in the original post.

  Interesting things.  I had not seen this before.  Now, I wish I had again the NI DAQ USB I had here last week so I could test that.

  Looks like I'll use a hub powered on this project.  But I think I will recommend always replace this power.  Although a lot of noise coming from the power supply, probably isn't good for nothing plugged it... or even sitting near him.

• My computer says that my drive is empty when it is not...

  I have a toshiba satellite l300 with windows vista and a dvd - r with pictures on it, and whenever I try to watch the photos told me that the disk is empty, but if I try to put something else on the disc it then told me that the disk is write protected.
  I know for a fact that the photos are on the dvd because I can play with my Xbox 360 and also my dvd player, and I also watched them at my friend using their computer.
  Does anyone know why my computer says dvd is blank when it clearly isn't?
  I did not burn the dvd, that it was given to me so I don't know anything about how it is burned, but I know that the photos ARE out there and I really need to find a way to get them on my computer.

  Hello

  Some discs will not work on other machines to due to different alignment problems. Other discs work on your machine, or just one or a few? If only a few then the tolerance of the machine and your unit are on opposite sides of the authorized spectrum. You might even find some discs burn you work on another computer when those burned on it will not work on your. This is because your drive is in fact several devices in one box and the tolerance of each part can be defined in different. Readers can be re-aligned however normally it's really not worth doing.

  ---------------------------------------------------------

  If you have problems with all the drives check the below:

  Try this double click Control Panel - Device Manager - CD/DVD - device - tab - click on update drivers (this will probably do nothing) - then RIGHT click the drive of the driver - UNINSTALL - REBOOT this will refresh the default driver stack.

  Then work your way through these - don't forget the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Vista connects ok in the browser or by mail, but all other applications can not connect

  I have Brodadband connectivity, but other applications, connection attempt fail, windows update, escan, teamviewer and links to htm in the emails files fail to connect. Links in the emails don't report any association, but the associations for htm and html are here.

  Auto even started the browser like escan help sessions fail even if the links are fortunately available in a browser session manually started.

  I'm stuck on this one - any ideas anyone

  Malc

  Hi John,.

  ·         Did you do changes on the computer before the show?

  ·         You use Internet Explorer? If so, what version are you using?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For reference:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• E7440 latitude: Wake-on-Lan works when the laptop is turned off, but not when it's put into hibernation

  I have a Latitude E7440 running a clean install of Windows 10. If the computer has been stopped, I can use a Wake - On - Lan Magic Packet to the MAC address of the Ethernet port (as described here) to turn the computer back on. But if the computer is in hibernation, it does not work.

  Probably, it is that when the computer is in hibernation the link on my switch light is off, but when it is stopped, the link light is on.

  So my question is: How can I get this phone to maintain the LAN port when hibernation, in the same way on shutdown? Thanks in advance.

  smammy,

  Click on the link below for a possible resolution following on problem of your computer network settings.

  How do I enable Wake on Lan on Windows 10

• should I take out the battery when the laptop is plugged in

  Hello everyone, starting here. I have a question about my hp dv7-4274nr laptop... I said, when you use the computer should I take out the battery when it is plugged in to the 110 (ankle) is this true?

  Thanks Mike

  No, the only reason would be if you use the laptop on the sector for a long time, like a month or more, then drain the battery in 30-40%, and remove, store in a cool place.

• Shift of the computer; It seems that my laptop is lagging when it is connected to the power supply (AC adapter) and it works perfectly fine when it is NOT connected to the power adapter. Can someone help or diagnose the problem?

  This shift of computer thing had never happened before until about a week ago. The shift comes every 30 seconds or more and it occurs also when I switch between applications.

  Hello

  I saw this kinds of problems occur with the power strips and even UPS systems. And some similar questions have
  been solved using them actually, especially the UPS. If the power strip has important circuit protection
  He'll probably bad or you have very low power at first on this AC circuit.

  Solution is not to use the tape and maybe get a UPS with brown-out solution.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I tried to install something on the account of other users but my admin password does not work, I logged my account admin to make sure that im using the correct password and it works? any suggestions

  Works of password to log into the admin account

  password does not work to install the software on other accounts

  This will happen when different keyboards are installed. Try to use a password like 123456 is insensitive to the different schemes. CapsLock or NumLock is also a frequent culprit in such cases.

• Why NIDAQ claim that a device is connected when it is not, and how do I get to stop it

  We are using Windows XP embedded and the USB 6211 (OEM) the problem is for every new daq card which must be connected to the NIDaq system lists it as Dev1, Dev2 and so on.  The problem comes if you remove a daq card and replace with another, then he calls Dev1 and if your software loads Dev1 NIDaq doesn't bother to tell you that the device is not really there until you try to start a task.  Also on XP embedded Mesurmant and Assistant automation gets not installed/compiled with the image so there is no way to remove Dev1 to be able to "Dev2' Dev1.  Is there a way to tell what devices are REALLY connected to the system?

  Sorry for the false assumption on your language of choice. The two functions are DAQmxGetSysDevNames and DAQmxGetDevIsSimulated.  DAQmxGetSysDevNames returns an array of the fo devices in your system.  I ran in a loop For and reinforced with each device.  If I call the DAQmxGetDevIsSimulated on a device that does not exist, an error will be thrown. If it is simulated a true will be returned as well.  My code is that waiting for the first device which is not simulated and is present in the system.

• My laptop battery won't recharge, even if the laptop is plugged in!

  My little brother came in my room in the morning, when I was charging my laptop Gateway and must have accidentally it unplugged when it was 70% asbout finished filling. So I left it unplugged. And then the next day, when the battery is dead, I plugged it and it lit, but when I checked the status of the battery when you hover over the battery, read state icon: 0% available plugged in, do not load. How can I make it recharge?

  Looks like the battery is faulty, or the loading of equipment is defective.  Probably time to communicate with the gateway on the problem...

• Says that my software is counterfeit, when it is not.

  I bought a new computer. I uninstalled Adobe CS6 Design & Web Premium from the old PC, then ran the installation on the new PC files that I downloaded from https://adobe.subscribenet.com

  Installation stopped with a message installation cannot continue because the software is counterfeit. This certainly isn't.

  I copied it to my external hard drive on the desktop of the PC I want to install on, and the question remained.

  Why is it is marked as wrong?

  If you have purchased a licensed version of the software and did not have a version of subscription, then you must download and install the license version.

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

• Why tell me that Bing is already installed, when it does not exist on my computer?

  I removed the Bing on my computer because I don't like it much. Given that Google has become such a useless piece of junk, I decided to re - install Bing, but whenever I try, I get the following message.
  Quiote:
  Firefox could not install the plugin 'https://addons.mozilla.org/firefox/downloads/file/54407/bing-20090601.xml?src=category' research as an engine with the same name already exists.
  This engine does not see any where on my computer with the exception of an XML file in Firefox/search engines. I deleted but it makes no difference. The files do not appear in Tools\addons, not in all: config. Please don't tell me that Firefox has become as useless as Google... I don't want to use IE.

  Bing must be installed as a default search engine (bing.xml in the folder searchplugins in the Firefox program folder)
  If the file is there and you can't see not in the search engines manage then click on the "Restore default settings" button to restore the default search engines.

  If this does not help, then delete the search.json file and a possible search.sqlite in the Firefox profile folder.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox