How can I turn a channel in the SMU-6556 hsdio for material comparison mode?
Hello
I am developing a system with Labview2013, TestStand2013, and SMU-6556
The system diagram is:
SMU-6556 > - 12 channels - 3---> Dut1
Hardware compare mode:---3 channels---> Dut2
| - 3 channels---> Dut3
| - 3 channels---> Dut4
In TestStand, I have the following configuration:
1. in the "Setup" section I'm loading ~ 10 digital waveforms with 12 channels each in memory of SMU-6556.
2. in the section 'Hand', that I'm running in hardware compare mode each digital waveforms. (DWF1, DWF2,..., DWF10)
The system works well for test of 4 had.
Without loading a new wave form how can I enable/disable underwent?
For example, how can I configure to test only the dut1 and dut3?
HELO engfpe,
You can see the advanced, advanced attribute: hardware compare: bit Error Cumulative property and see if that will get your request.
Cumulative error Bits will tell you what mistakes HWC product channels even if the FIFO is full. In this way, you can at least know where to pass the ASE. If it fails and you would like more information, then you should always charge the waveform in order to get a manageable number of HWC error, but hope that helps at least. This feature was added in NOR-HSDIO 2.0, so make sure you have the latest driver.
Tags: NI Hardware
Similar Questions
-
RE: TABS ARE WINDOWS!
The windows bar already functions as a tab bar. These tabs are called "windows". So, I find windows superfluous Firefox tab. How can I turn off completely from the 23 of Firefox? I don't need to what are essentially the bars of TWO Windows covering the entire width of the image of my screen! I already have a Windows bar at the bottom of my screen, and if I really wanted to, I could change ITS position towards the top of the screen, so that it would LOOK at the windows of Firefox tabs bar. Firefox TABS are, essentially, a SECOND bar Windows superfluous.Here are my reasons why I prefer to use Mozilla's Firefox, Microsoft Internet Explorer or Google Chrome. I love and admire Firefox intended to Mozilla on good security for Personas Firefox Add-on and for free use of Firefox in the Add on Ad-Block, which, as you know, has the merit of separate to reduce the size of the screen - the last is my reason for wanting to get rid of "windows" Firefox SUPERFLUOUS tabs bar. I'm terribly sick companies forcing bars (most representative of marketing campaigns, trying to sell me something) in my browser (and in my throat) whenever I download something. (In case you haven't guessed, I have deliberately talking about your bar of Firefox tabs as a '' windows' tabs Firefox bar', because the TABS are WINDOWS!)
You can also have an addon to open new tabs in a new window.
-
Movies copied from my iphone are on the side. How can I turn whether right to the top?
I copied several movies/videos from my iphone 4 in my images. However, they are on the side. How can I turn them so that they are right at the top?
For viewing only... you can use VLC Media Player.
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)VLC Media Player
http://www.filehippo.com/download_vlc/
(works on XP/Vista/7)After installing VLC open an it... then video and pause go to...
Tools / effects and filters / video effects tab / geometry tab.
Select the check box turn / slide the circle / close / play.If you want to rotate the video and save the new version...
Windows Live Movie Maker may be worth a try:Shoot a video of 90 degrees with VLC or Windows Live Movie Maker
http://www.howtogeek.com/HOWTO/14751/rotate-a-video-90-degrees-with-VLC-or-Windows-Live-Movie-Maker/Windows Live Movie Maker - rotate 90 ° right
http://www.howtogeek.com/wp-content/uploads/2010/04/sshot710.PNGIf the clips are not compatible with Windows
Live Movie Maker... it may be worth trying to convert
to the. Before you import into Live WMV format
Movie Maker.There are many converters available on the net... some
free... some detail.The following freeware converters are a few examples:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)(1) Sothink Free Video Converter
http://www.Sothinkmedia.com/video-converter/
(Windows XP / Vista / 7)You will need to unzip the file... or you could just drag
the Setup.exe from the file out of the folder and drop it on your
desktop and install from there.Once installed... Open Sothink and go to... Add the files button...
Find and select the clips you want to convert.Next... in the encoding settings... Choose... Video credits.
WMV - Windows Media Video (*.wmv).Choose an output folder and on the left, click on the button convert.
You can experiment with other settings later but
This should help you get started.(2) format Factory (freeware)
http://www.videohelp.com/tools/Format_Factory
(the 'direct link' is faster)
(the file you want to download is: > FFSetup270.zip<>
(FWIW... installation..., you can uncheck
('all' boxes on the last screen)
(Windows XP / Vista / 7)First, you will need to decompress the file or just open the
Drag FFSetup270.exe out of the folder
and drop it on your desktop. To install left click.Next, after the download and installation of Format
Factory... you can open the program and
left click on the toolbar, the "Option" button and
"Select an output folder to" / apply / OK.
(this is where you find your files after they)
are converted)Drag and drop your video clips on the main screen...
Select "all to WMV" / OK...
Click on... Beginning... in the toolbar...
That should do it...
Another option:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Free Video Flip and do rotate (XP / Vista / 7)
http://download.CNET.com/free-video-flip-and-rotate/3000-2194_4-10763530.html
(* You can uncheck the option to install the DVDVideoSoft toolbar *) -
How can I turn off automatic layout the text bold?
Expensive, most of the sections of the text in the e-mails I receive are in bold and when I responded to emails or compose new messages, I'm unable to disable the 'fat' of the text layout.
How to turn off the text bold (in the newly composed emails) and restoration of the emails already received for their original style of the police (with bold text appearing only case provided by the sender)?Thanks a lot-Toad Hall. I followed your advice and it seems to have worked.
Thanks again -
How can I turn off channels in a table
I have two cards for flow and one for pressure, each chart has multiple entries, I need a way to disable some of them when not to use all channels.
I still need to save all the channels when the Capture button is used for 10 seconds.
Ideas for this problem?
Richard
I use Labview 8.6 and a PCI 6220DAQ in an interconnection SCB-68 box.
Hello Richard,.
Thank you for using OR forums. There are nodes of property, that you can use to select a track and then change the visibility of the plot. You must first select the active curve right click on your map and then go to Creat > property Node > ActivePlot. Once you have done this, so that you can simply drag the bottom of the node property down add additional properties for this specific ranking. Once you create a constant for the active plot area you can then choose the Visible field property by clicking on one of the additional properties you just added and select the parcel > Visible. Wire a constant false to this entry if you want to disable. Take a look at the attached example and let me know if you have any additional questions.
Kind regards
-
How can I turn off "temporarily avoiding the bad connevtoon".
How can I disable avoid bad connections? I prefer not to get the function "avoid bad connections temporarily. Thank you.
Hello! Try this. Go to settings > Wi - fi > right click on the 3 points down > advanced > uncheck prevent bad connection
-
How can I transfer my snippets of the cc to cc for 2014?
Since I automated a lot of frequently used fragments of code in CC, Miss me them a lot in the new version because they don't synchronize with other preferences and content.
How can I prevent many work to be lost?
You can do quite easily from the desktop without the need to install any type of extension...
First, turn on the files hidden on your system, then...
OS > users > username > (normally hidden) AppData > Roaming > Adobe > Dreamweaver CC > your language > Configuration
Copy the whole folder extracted there, then go to...
OS > users > username > (normally hidden) AppData > Roaming > Adobe > Dreamweaver CC 2014 > your language > Configuration
Paste the Snippets folder
Fact.
-
When I go to print nothing happened. I get an error message that says: access denied. I have only one printer. He suggested that it cannot be set as the default printer. How can I do this?
Hello
I suggest you to visit these links and check if it helps:http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
It will be useful.
-
How can I correct an error of the driver realtek ethernet for windows vista?
I had my hard drive fail so I went and bought a new and put it in. but when I reset everything I couldn't all internet and I get an error that says something about a fail driver realtek ethernet or something like that. HELP PLZ!
Hello
· What is the brand and model of your computer?
· What hard drive was causing the problem?
I would l recommend you follow the steps in troubleshooting section and check if it helps:
Network adapter problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
You can also contact technical support for Realtek and check the availability of drivers for Windows Vista.
-
How can I turn off shuffle on the latest ios 9. I don't care
It was a maddening, any quest in the morning and I'm hoping someone can answer how to disable the option shuffle for IPAD. the reason for the caps is because I've been Googling all morning and every single response shows just iPHONE, screenshots, and they are clearly different interfaces because the options they show simply do not appear.
I keep seeing again and again to choose a song from an album so the album art and song info are full screen and then tap the icon shuffle inside, although simply is not working because the selection of a new album in ipad brings to the top of the entire track on the album cover on the right and the left and simply select the cheek pieces. There is a big 'Shuffle' just above the track list, but by selecting only mix, changing and mixing the new order. The instructions for the iphone obviously do not correspond to the ipad so can someone who did an ipad tell me how to shuffle off please?
I hate how Apple has now the need to keep changing the user interface more. I would rather have stuck with the ios interface 6 or ios 5 if it meant that they stopped to bury the functions in the most complicated way, non-obvious possible. Simple functions like this are supposed to be intuitive, not getting people to need to google all morning and then ask a question on a forum to find out. Thanks for the help!
I have an iPad. The ways to the Shuffle is on the two screenshots below... The first one mixes everything. Another mix album only. If this does not work for your I would like to reset your music application or restore the iPad than something is wrong with the system.
Reset music approx. close music completely from the window of the selector app by double clicking the Home button and slide up the preview pane of music until it disappears from the display. Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.
-
I want to disable indexing of my computer via the control panel... I tried, but failed. Can someone give me a route step by step on how I disable indexing with the control panel function?
Open Add/Remove Programs, locate & open Add/Remove windows components"."
Locate & uncheck "indexing service", close when thru.
In addition, we can go to run, type: services.msc
MSC, highlight indexing, double-click, reset the properties to "disable,"
'manual' or 'auto', firm when thru.
-
How can I turn off screen at the right time?
Hello.
This my first post here so please, be gentle.
I have a Lenovo Ideacentre running Windows 7 Home Premium 64-bit with 4 GB of RAM desktop all-in-one.
The display turns off always 15 minutes regardless of what happens in the "Power Options" which is very frustrating. I understand that the default setting of 15 minutes is used for laptops to save the battery, but it is also used on my all-in-one, even though I normally put the time in 5 hours Power Options. I can not also bring the display back unless I press Ctrl + Alt + Delete. I'm not sure but I think that this problem started after installing the latest Windows Update.
Does anyone know of a solution to the please my problem? (I just want to be able to adjust the display time I want it to be and is limited to 15 minutes to an hour).
andjen
Excellent, well that was my first guess at least.
It seems strange to me that the screen saver option set initially, but later it was power settings (no screen saver) who came back. So I will at this stage to guess that changing the value of the new screen saver is more would all good, no? If something has changed your power options, but this isn't a strategy of e-mail server and is not the screen saver.
I think that at this point I could try to create a new power plan (link on the left side of the power options page) and see if activate a new plan of costs it will keep coming back. Even if something like an old registry value exists, it should apply to the former regime.
-
How can I synchronize my favorites of the device with Firefox for Android
is it possible that I can sync.the bookmarks on my device with Firefox for Android
Hello
We have just implemented this in beta version of Firefox. So if you install it, you must go into the settings and at the bottom there is an import of point Android. A dialog box allows you to import bookmarks and history. It will be in the end V15.
Thank you
Michelle -
Here are the servers in the cluster. The active cluster in the attached image is PrdERx2. The zeros should have a count associated with them equal to zero.
Thank you
Barry
Hi Barry -.
If the dashboard in question was created with WCF (our Framework Web component that is included with the product), then using the tab design inspecting dashboard design suggested Bart is a good. WCF dashboard get much of their data by querying the Foglight data model so once you are in the editor of WCF, change views to queries drop-down list and see what queries can exist in this module WCF. Test if you find to make sure they return data. Also change the functions drop-down list and see if you can test as well.
I hope this helps.
Robert
-
I have need help send the 'audit trail of password for a document. A company, we work with will not accept the pdf of the signed document copy.Thank you.
Hello
You can find your report via the tab manage point culminating the document in question and select the history tab (on the right side). You will then see the option of audit report.
Thank you
Maybe you are looking for
-
Copy of photos and vidoes on external hard drive to Windows import
Hello world & Thank you in advance for your help! I want to export my external library from the Photos App on a hard disk and then import them under MS Windows. The library contains photos and videos. So far, I have tried two ways: 1 copy the entire
-
Satellite P200-1 b 6: Sound Driver update fails, and HD-DVD player does not work
I just bought a laptop Satellite P200-1 b 6 and spent the day installing the updates recommended by the TEMPO programme. One of them was an update of RealTek audio driver but on run this it fails at about 80% of the way through with an error: "instal
-
This ext drive works on a notebook of friends (windows 7) and works also on the desktop (windows XP) but work on that notebook (windows xp). I realized problems as recommended by a number of times. Problem remains.
-
By default the monitors of the printer in the registry missing__
I have problems with a printer/scanner. Then, I started to follow all the procedures in your forum on the problems of printer and usb. I came to the procedure which you enter in the registry underHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\
-
How to activate the V220 Wireless Optical mouse?
I just installed a Cordless Optical Mouse V220. but I can't activate it.