How can keyboard and mouse issues - I solve them? Is this a problem with the computer or device?

Similar Questions

• I have Photoshop CS6 and Lightroom 5.7. They are currently installed on a PC with Windows 8.1 Professional 32-bit and 4 GB of RAM. I want to move to a PC with Windows 8.1 Professional 64 bit and 32 GB of memory, because I have a problem with the large

  I have Photoshop CS6 and Lightroom 5.7. They are currently installed on a PC with Windows 8.1 Professional 32-bit and 4 GB of RAM. I want to move to a PC with Windows 8.1 Professional 64 bit and 32 GB of memory, because I have a problem with the large RAW from a Canon 5 Ds R. What should I do?

  You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• I can't import my script (film) into Adobe Story. The error message says that I am unable to connect to the Adobe servers. Is this a problem with the Adobe?

  I can't import my script (film) into Adobe Story. The error message says: I am unable to connect to the Adobe servers. Is this a problem with the Adobe?

  Yes and no it seems that if the file is a .doc or .pdf, that it does not load properly. But if I bring him in a Final Draft format, it works perfectly.

  Adam

  Sent from my iPhone

• Could get a new router block printing? We had a lot of problems with the computer in the last week and a half. Bought new router and now the printer does not print. :-(

  (1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.

  (2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.

  (3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).

  (4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.

  (5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.

  (6) in any case, we are finally online... only now... I can't the printer to work. :-(  This has worked before.  Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.

  We are under vista. The router is a Linksys wifi (which we have) N300 model E900.

  Of course I appreciate any help you can give. God bless you!

  Michelle and Ruth.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems with the printer in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• How can I block a program that I have not loading when I start the computer. What is own mac. It comes to start scaning and ask to activate. Is this something authorized by apple. If this is not the case, how can I stop it from loading up.

  Recently whenever I start the computer a program named Mac cleaning charge, stat my scanning system and ask to activate. It looks like a third party program that I should pay. Is it an accredited program for mac. If this is not the case, how can block this load upward.

  Is it called Advanced Mac Cleaner?  If so go here. http://AMC.Kayako.com/Knowledgebase/article/view/4/0/how-to-uninstall-advanced-m ac-cleaner

  It is malware.

  Edit: See post of Linc Davis on this topic for more detailed information.

  Advanced Mac cleanser

• How can I encrypt a drive where cs diskutil convert reports 'a problem', let the unreadable disk?

  I try to encrypt my Time Machine backup volume, but diskutil refuses and leaves the disc unreadable (but fixable using Linux).  How can I proceed?

  It is a disc of TB USB3 Western Digital Elements 107 3.

  It has one HFS partition + and works very well.

  diskutil verifyDisk and diskutil verifyVolume don't report any problems.  I also used Alsoft DiskWarrior to repair inconsistencies, without problems.

  If I try to convert the volume, diskutil report 'a problem', like this:

      rb@Silverbird$ /usr/sbin/diskutil cs convert /Volumes/RB3TB1/
      Started CoreStorage operation on disk4s2 RB3TB1
      Resizing disk to fit Core Storage headers
      Creating Core Storage Logical Volume Group
      Attempting to unmount disk4s2
      Switching disk4s2 to Core Storage
      Waiting for Logical Volume to appear
      Mounting Logical Volume
      A problem occurred; undoing all changes
      Switching partition from Core Storage type to original type
      Undoing creation of Logical Volume Group
      Reclaiming space formerly used by Core Storage metadata
      Error: -69842: Couldn't mount disk
  

  This leaves the unreadable disk.  diskutil cs list shows the drive as a basic storage volume that is "online" and "reversible" but it may not be mounted or acted on, nor can the physical volume of the parent.  Disk utility crashes at startup when the drive is connected.  diskutil repairDisk on volume of parent reports:

      Repairing the partition map might erase disk4s1, proceed? (y/N) y
      Started partition map repair on disk4
      Checking prerequisites
      Problems were encountered during repair of the partition map
      Error: -69808: Some information was unavailable during an internal lookup
  

  In fact, all access to the disc seems to be broken at this point.

      rb@Silverbird$ sudo /usr/sbin/gpt show /dev/disk4
      gpt show: unable to open device '/dev/disk4': Input/output error
  

  You cannot read the device using hexdump.  The kernel seems mightily confused.

  I was able to recover the disc mounting Linux using the utility 'gdisk' to change the partition type to AF02 (storage of carrots) to AF00 (HFS +).  After that, diskutil checks the disk so the volume as OK.

  I think that Apple has a bug where diskutil fails to return the partition type.

  But this me no bugs more closely to encrypt my backup volume.

  Anyone have any idea what might be the 'problem' and how do I proceed?

      rb@Silverbird$ /usr/sbin/diskutil info /Volumes/RB3TB1
        Device Identifier:        disk5s2
        Device Node:              /dev/disk5s2
        Whole:                    No
        Part of Whole:            disk5
        Device / Media Name:      RB3TB1
   
        Volume Name:              RB3TB1
   
        Mounted:                  Yes
        Mount Point:              /Volumes/RB3TB1
   
        File System Personality:  Journaled HFS+
        Type (Bundle):            hfs
        Name (User Visible):      Mac OS Extended (Journaled)
        Journal:                  Journal size 229376 KB at offset 0x8f07408000
        Owners:                   Enabled
   
        Partition Type:           Apple_HFS
        OS Can Be Installed:      Yes
        Media Type:               Generic
        Protocol:                 USB
        SMART Status:             Not Supported
        Volume UUID:              F096E831-F27D-3433-9BBE-6B65F4F69FA5
        Disk / Partition UUID:    FE09034E-6AA0-4490-82A1-1F7E894ACD91
   
        Total Size:               3.0 TB (3000110108672 Bytes) (exactly 5859590056 512-Byte-Units)
        Volume Free Space:        78.1 GB (78142939136 Bytes) (exactly 152622928 512-Byte-Units)
        Device Block Size:        4096 Bytes
        Allocation Block Size:    4096 Bytes
   
        Read-Only Media:          No
        Read-Only Volume:         No
   
        Device Location:          External
        Removable Media:          No
  

  The disk contains files of about 732000000, according to the disk utility (in reality the directory entries).

  This is OS X 10.11.2, day, based on a new install of OS X 10.11 last month.

  Hello RPTB1,.

  Thank you for using communities of Apple Support.

  I see that you are wanting to encrypt your Time Machine backup disk. I see you are trying to do through Terminal or Unix command line, have you tried to use it through the Time Machine configuration and preferences? Take a look at this article and see how it works for you.

  OS X El Capitan: choose a backup drive, then set the encryption options

  Best regards.

• How can I get windows to remember my new password when I turn on the computer

  How can I get the computer to remember my password so that I should not put all the time that I am the only one to use it

  http://www.Lockergnome.com/Windows/2007/02/20/configure-Vista-for-automatic-logon/

  To do this, click on start and type netplwiz in the search field and press ENTER. When the user account control window appears, click on continue. In the window user accounts that appears, verify that your user account is enabled. Clearly, users must enter a user name and password to use this computer option, and then click OK. Provide the password to your user account when you are prompted, restart the computer. Vista will automatically log on with your user account.

  http://www.mydigitallife.info/2007/03/24/automatic-login-or-logon-to-Windows-Vista-without-clicking/

  A more detailed view of what you want to do.

  See you soon. Mick Murphy - Microsoft partner

• How can I mark an area in a line profile, to find work with the region?

  Hello together,

  I want to mark an area in a profile of the line. I tried to use the function (see attachment).

  How can I get the marked dates?

  I hope someone has an idea.

  Thank you

  Greetings zapfle

  Hi zapfle,

  I have attached a simple demo vi because you have developed in LabView 7.1. Hope this will help you with your task.

  Serge

• I disabled my speakers (by mistake) and now I can't find a way to allow them, they do not show in the list of devices?

  I turned off my speakers on Windows 7 64 bit to allow my sound to be heard through the HDMI I have connected my PC to my TV. Once I was watching a movie, I tried to reconfigure my PC back to its original settings and it was where I found that my speakers had been removed from my "playback devices" in the sound setting menu. Can someone help me with this?

  Hello
  Follow the suggestions and see if it helps.

  (a) right click on the Notification icon, the Volume icon bar.
  (b) select the playback devices.
  (c) right click on the title of the tab reading .
  (d) select see the disabled devices.

  (e) make a right click on it and select allow.

  (f) click on apply and OK.

• Compaq Presario CQ56: a problem with the computer keyboard laptop presario CQ56

  All keys (F) Act as the FN key is been held down when it is not. This just started today. I have a free prog called "keyboard test utility. Now, I have discovered that I can get 1 clean tap of F4 and the prog to test keyboard shows only illuminated F4. The next time I hit the letter (P) F4 and the Windows key are lit. Now, if I tap the FN key, and then press the F4 key. Again, F4 is the only 1 who turned on the prog of test. It's almost like the FN button nosed. I just to confirm. Rather than hold down the FN key to get things under the keys (F) (as a volume-, volume +, cut and so on). Now, I have to hold down the FN key to get the regular F1 to F12 keys. The rest of the keyboard is fine. A regular toggle switch or a switch in a radio push button. The FN key acts like someone ripped the wires to the back of the switch and reverse the wires and the switch can operate in reverse. Beats me how this can happen to a laptop keyboard.

  Steve

  Hello

  Here are a couple of things to try.

  1. judgment of the laptop.  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  2. try to change the default action of the keys 'f' as follows.

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then change the figure in the document at the following link.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02035108 & DocLang = in & docLocale = en_US &...

  Kind regards

  DP - K

• Problems with the computer automatically recording of surrounding sounds and play loudly on Windows 10.

  Original title: Sound

  Hey,.

  My laptop records the surrounding sounds and plays loudly and I have no idea how to turn it off.

  I hope someone can help me.

  ASUS X555L, Windows 8

  Hi Felix,.

  Thank you for your response with the current state of the question.

  I suggest you to make pregnant as default device and also keep microphone also disable.

  1. right click on the sound icon that is in the lower left corner of your screen under the system icons.

  2. Select the playback device.

  3. click on the Read tab, and then select a speaker from the list and then click set as default.

  Let us know if you need further assistance on related issues of Windows and we will be happy to help you.

• I have a problem with the computer is slow and does not file.

  1 of my pc and 1 another laptop, both with same OS - win 7 starter, atom and same ram and Ghz processor.

  The the Task Manager on the two of them performing at about 50%
  I use wifi and same place,
  always pages on my pc are load too late, manyatimes same gmail takes more than an hour to load or load never at all.
  Live TV on my pc crashes a lot and the clarity of the video is too bad, although the same graphics card, wifi, etc. are used.
  Any recommendation to get rid of these problems?
  2. some viruses had infected my pc,
  I tried to scan my pc and the USB with 2 antivirus free and pay different and even contacted the companies and sent them files. But I got no solution.
  On my pc, the files opens, show that a few errors before you open it then on my cell it do not open at all. Only shortcuts are displayed, while the USB is to have 4 GB of data.
  The companies had scanned all files that are intended for them and had recommended some solutions, but none of them worked and I was faced with the same problems.
  It was queries that I had sent to the antivirus company-
  10-20-bitdefender files that are
  > infected. They were initially on my USB, then I connected to another
  > pc. After that, when I connected to my pc, I scanned and that she was
  > no virus. Then the ameliiecouturiaux and the files whatever i seclect opened in a
  > new window and took that wasannoying time. So I copied all the files to my
  > pc, yet once scanned, formatted my USB and then comes the againNow copiedit the
  > problem - all the icons or folders remain the same with the name of the folders but
  > the files inside this foldergot automatically changed and I lost all my
  > data. Now, I can't find any of my files on my pc or my USB. PL send me
  > an email so that I canattach the files and send them to bitdefender. Dungeon of pl
  > secure these files. Some files have an another new error that I had
  > downloaded. More files will be downloaded once I have bitdefender recieveemail to
  
  > that I can answer. PL copy this message in its entirety and add this to your answer.
  According to my knowledge, 2 of my PC are infected and the virus are not getting detected by bitdefender on my PC1 but 4 threats have been detected on the laptop...

  The same files are include the other way on my other pc.

  Whenever I open the files, save option opens and a new file is saved with the file tha but they never get to open in word or powerpoint, only the backup option is displayed.

  The original files are protected by copyright and are lost. PL help me if possible to retrieve and delete all the files once the inspection is completed. You can forward this message to any authorized person.

  Attached files have changed to 1 or 2 k, but there was initially datas in a few MBs.

  201310131003535. I mentioned that somewhere I had formatted the USB key. Just before that, I had copied all files by selecting CTRL A and cut all the files in a directory on my PC. Then I opened the USB and no files were there. But always around 4 GB has been shown as being busy on the USB stick before formatting.
  My pc takes too long to restart, I tried a few 3 - 4 times and no updates have been installed or waiting to install after the 2nd time but when even he took more time than usual to restart and is compared to the other pc taking 2 X the time to restart, but two of them have installed bitdefender. Problem in my laptop toshiba, not pc lenovo, space time with more than 50 percent on the disk processor and Atom c.
  The files on my USB key are automatically replaced by shortcuts and so files open in a new tab and new cases opened are not those of origin who have been saved by me in this matter. Yet once I formatted and scanned, files, pc and USB but still facing the same USB key.
  Problems-

  1. all files are automatically displayed as shortcuts, even if I had pasted the original file

  2. once I click on open, I get an error and then after clicking on ok, some files get opened

  Before sending the email, I had formatted the USB scanned files on my HARD drive and then copied on the USB. The same problem persists. I think that when the files are displayed or open, the virus does something and change his behavior wrongly.

  1 bitdefender watch as new bitdefender is available, I click ok and repair wire starts and then it tells the system to restart.this cycle continues on the race

  2. 2 files are missing (attachment)

  3. could you send me the file by e-mail?  You can also download the link below.

  http://labs.BitDefender.com/

  because the webste or browsers (chrome, firefox) are not respongding.

  4. I could get these 2 points. Browse your computer to locate the removable storage device and right click

  its icon.
  3. in the shortcut menu, point to Bitdefender and select immunize it
  
  drive.
  I am able to open my pendrive ffrom on 1 pc but on my laptop, all the files don't appear as shortcuts 1-2 KB and can not access.
  zwhwenever, I click the icon, the window save under opens for all files.
  on this pci usingbitdefender antivirus am more 2013 16.34.0.1913 downloaded from download.com and the antivirus from bitdefender 60 seconds. 1.0.3.59
  my pc shows the USB key as safe, but laptop with 2 antivirus mentioned above are showing 2 virus - worm.vbs.ch (bitdefender 2013)
  using bitdefendr 2013 more on laptop, I tried to immunize the file but an error was encountered.
  the error is in German-
  Der process nicht auf die Datei zugreifen kann, da sie von einem other process verwendet wird. I closed all the files and tried to immunize the USB of the my computer without having to open the USB by clicking on it.
  Itried to remoe and atach the pendriveagain and even restarted the laptop, but the same error message appeared.
  Properties - 5.10 GB ref 7.89 GB, but when the USB wasopened, all files were only 2 or 3 KB of size.
  1 more problem-i tried to delete the files in quarantine but bitdefender stopped working and went off automatically.
  I copied all the files from USB to pc, they were 2.22 GB, then again, I copied them back after scannig and formatting of topendrive and it was only 1.44 GB
  BitDefender Antivirus 2013 never works and always displays the message to restart the laptop so that it can start working, but it neverstarts. But bitdefendeer 60 seconds work.

  LOL - install software Registry Cleaner to fix damaged or broken registry entries.

  More likely to worsen the situation.

• When users drag browser bigger - how can footer and separate content I keep them together?

  Hello

  On the homepage of my site, there is a large slideshow of 100% and a footer of 100% and no matter what I do, if a user has a widescreen and extends the browser vertically, the footer appears to separate the content, leaving a blank space... which indicates a black bar because the homepage has a black background.

  I can't figure out how to put the foot to stick to the bottom of the content.

  What I am doing wrong.

  The site is: www.rubiesanddiamonds.com

  You can also view a trial version at:

  rubiesanddiamonds. BusinessCatalyst.com

  Any help would be appreciated.

  This separation does not occur on the site of the other pages, but they are pretty standard.

  Thank you

  Dean Hill...

  Hey Milt,

  There could be an element wandering at the bottom of your screen which could be the cause of the footer to develop - try to see if that solves your problem. You can try also just the bottom of the page where your footer ends.

  Kind regards

  Akshay

• How can I configure the subfolders in Firefox my WEBMAIL so that all are visible and I can drag and drop emails in my Inbox? (this is possible with Explorer)

  I have a Windows 7 operating system on my PC.

  Sorry for the late reply, but what kind of webmail do you use? What is a popular site like Gmail/Yahoo/Hotmail or a corporate site (for example, the Outlook Web app) or something else?

  If you have already solved this problem, please describe what you were referring to others.

• After problems with the computer, I had to reload first and 12 elements but installed 32-bit 64 steps.  This can be changed

  Hello, I used to use 64-bit but when my programs were re installed the installer chooses 32-bit.  I have back up before realizing.  Is it too late to change the 64-bit system?  How would I do it please.

  the 64-bit and 32-bit are installed on 64-bit computers.

  If you have windows check in your program files > adobe directory.