How can satellite P300-156 - I clean it?

Similar Questions

• Satellite P300 - 156 Windows 7 Crash problem

  Hello
  I have the Toshiba Satellite P300 - 156 PSPC4E, model and I've had this laptop for a couple of years now.
  Before installing windows 7, I got the default Windows Vista installed and it worked fine.
  Now since installing windows 7, no matter WHAT game I try and play just causes the cell to go black screen and turn off after about 5-10 minutes of play.
  I thought that this was due to an overheating problem... so I opened the laptop and cleaned all that and then put it back together again.
  (YES I checked all the wires are back where they should be and all the components are working properly)
  It did not work.
  Then I tried updating all my drivers and software ect.
  Still nothing.
  I searched on through pages and pages of search results for the same problems with Windows 7 and the game crashing... but nobody seems to know how to fix it.
  I thought it was just windows 7, but I re installed windows vista and it's always done the same thing on there now.
  I tried to install all the drivers of the model for this laptop toshibas site and not luck.
  My windows vista and windows 7 are two authentic copies.

  All the hardware is functioning normally (as far as im aware) and I really don't see what can cause this problem.

  If someone could give me some advice on what to do it would be greatly appreciated.

  Thank you

  Hello

  Which driver you use display? I m P300 owner but not on my A300, I had a similar problem that the laptop has crashed during a game. It seems that the reason was a 3rd party driver or let's say the driver of the manufacturing of the graphics chip directly. I think that because they are not prétestées on the cell and causing overheating

  So I recommend you to install the latest driver of display on the Toshiba site.

  Finally and above all what version of Windows 7 (32 or 64-bit), you have installed and what version of BIOS?
  From Toshiba Web site also shows the new BIOS versions and several versions 32 bit and 64 bit OS. Maybe you have to day/edit, who knows?

• Satellite P300-156 - and the button Return give the same values

  Hello

  I have a satellite P300-156, and it has a numeric keypad.
  I have problems because the Enter key and the Return key give the same values. I believe that it is incorrect.
  Can anyone help.

  Key on the numeric keypad should give an input it does.
  the Enter key on the main keyboard should give a carriage return value, but it gives an input value.

  Usually this does not cause a problem, but with software like photo shop that makes the distinction between a carriage return and a hard fall it does not work.

  Can someone help me please

  Thank you

  Hello

  To my eyes the entry and return keys are the same keys that provides the same functionality.
  I really put t know why you believe that there is something not right

  By the way; Check if you are using the latest version of the BIOS!

• Re: Satellite P300-156: keyboard freezes touch touchpad - mic is not w

  Hello

  I installed Windows 8 on my satellite P300-156 and now I have a big problem.
  My keyboard crashes when you touch the touch pad. In addition, the microphone does not work when the Windows Device Manager indicates that it is ok.

  There is no windows driver for this laptop 8...

  There are no drivers for the laptop because it isn't win 8 supported series.
  But even if there is no Win 8 drivers, the system should not freeze affecting the touchpad module.

  However, the Synaptics touchpad driver for Win 7 or 8 to win can be downloaded from Synaptics page.
  Recommend check it out!

• Re: HARD drive need internal and business BT internal module for Satellite P300-156

  where can I buy HDD case internal and internal module for Satellite P300-156 BT?

  Try an authorized Service Center. There is a list on the Toshiba under Support site

• Satellite P300-156 won't start or by MAIL

  Hello

  I have a Satellite P300-156 I bought a few months as damaged. The screen has been damaged and the case slightly cracked. I replaced the screen and hard drive and main card seems to have no physical damage. I've been running this system for 3 months now without any problem but, today, for some reason, it won't start or even POST. It powers on and the CPU fan starts to turn then stops and does nothing. No display (I tried external). CD player works. No beeps.

  I tried reinstalling RAM even open completely and reinstalling all connections, nothing done. Does anyone have an idea what component is gone? (CPU/GPU/RAM)

  Any help would be greatly appreciated

  Thank you

  Did you update the BIOS or something?
  For me, this is a normal behavior when the BIOS chip is faulty.

• Sound on Satellite P300-156 problems

  I bought a Satellite P300-156 1 year, mainly because he looked good and had Dolby Sound Room. However, I discovered not long after the purchase that he had no Dolby installed - so I tried to download the new drivers on the Toshiba site. They worked and gave me the SmartAudio app to activate the Dolby Virtual Speaker and Headphone Dolby of Dolby Sound Room. -The volume varies, as someone who has a hold on the volume dial. Not only when songs get more coins, but even just when someone speaks.

  This is crazy - and very annoying - and disappointing given the speakers harmon/kardon give amazing clarity. 3 driver updates later - still the same problem. Heard about people with the new P500 have the same problem - please does anyone have a solution? I got the problem under Vista 32 bit and now the same thing under 7 64-bit. It's a Conexant driver.

  The problem does not occur under the headphones/external speakers.

  Thank you.

  Hello

  If I understand this problem, that happened after the driver installation, and after activating the Dolby Sound Room.

  In Control Panel-> Audio Smart-> Audio second tab management, you will find a few options.
  The mode clasic has been marked.

  Uncheck this box and go to the Multi flow modes and configure it.

  I m not very well what settings you need to enable or disable because I m not P300 owner, but you should play around with these options and try different settings.

• How can I remove optical drive of the Satellite P300-156?

  Hello

  I just ordered a HD-DVD-R (Toshiba SD-L902A) for my P300-156 drive, but I don't see how I can remove my existing laptop DVD - RW drive.

  Does anyone know how this can be done without opening the case?

  Hello

  To remove the CD/DVD drive, first remove the screws of this CURIOUS.
  The screw is hidden under the keyboard.
  Therefore, you will need to remove the keyboard first.
  The keyboard is fixed with 2 screws. These screws are hidden beneath the thin plastic (door-KB)
  First, you must remove this support KB to get access to these two screws.
  After you remove the keyboard, you will find a screw that holds the ODD. Remove it and disconnecting an optical disc drive to the connector on the system board.

  But note; Be careful and all you are doing is at your own risk AND PERIL!

• How to disable the sound card internal on Satellite P300-156

  I bought SB X - Fi Notebook Card.
  Configure the card as default sound card after the installation, but after the reboot, the system do internal sound card by default.
  How can I not disabled the onboard sound.
  In the Bios there is no option to turn it off.

  Help

  Hello

  You will not be able to disable in the BIOS.
  These sis not available in BIOS setting!

  You can try to disable the sound card in Device Manager!

  Mark the sound card in Device Manager and disable it!

• Satellite P300-156 - cannot install any OS

  Hello

  I had a P300-156 for a while.
  It was fine until recently, when the DHCP client stopped workin and wouldn't start.

  So I tried to restore from disk and had no dice with that try.
  So I tried to recover from HARD drive again once any chance the laptop keeps freezing after installation.

  So I tried to install Ubuntu on the laptop but still the same problem, said linux 'buffer I/O sdo error "?
  I'm not sure what in other words, it has however managed to wipe the entire drive.

  And I can not install XP because it does not find the HARD drive.

  The situation is so that I don't have any of the recovery methods and that you can not install another OS.

  Guys im really confused on the topic of what to do here, so if anyone can help please I need.

  Hi James

  I'm not sure if your HARD drive is dead or not, but you should know that your installation of Win XP does not recognize the HDD too if the SATA driver has not been included.
  The fact is that your P300 was equipped with the SATA HDD controller and the SATA driver is needed and if you want to install an operating system.

  The SATA driver is part of the Intel Matrix Storage Manager.
  So if you want to install XP on your P300, you must first include the SATA drive in the XP installation CD.
  This can be done very easily using a free software called nLite.

  This Toshiba doc would be helpful for you because if describes step by step how to include a driver SATA;

  Check this box:
  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  Good bye

• Satellite P300-156 PSPC4E - stay white media LEDs on after power off

  Hello

  I have a Toshiba laptop Satellite P series P300 156 (PSPC4E) which has just developed a problem

  When I turned off the laptop stops normally, start button / stop itself turns off, but the white Media 6 LED to the right of the power button remains constantly. The only way to get these themselves to turn off is to disconnect the battery.

  Can someone please advise

  Thank you very much

  Hello

  I'm don't know if this will help, but try to set the BIOS to the default settings or try to disable the LED lighting in the BIOS settings.

  Play around with these settings.

• How can satellite P500-024 - I do a new partition with full disk space?

  Hello

  I just bought the Satellite P500-024 and it came with 640 GB HARD drive.

  I just found when clicking on * my computer * which is the HARD drive is cut to the drive C: and D: drive. How can I add the D drive half of the HARD drive on the C: drive of priority so there because I then a full accese 640GO HDD in a chase without cutting 50-50?

  The reason why I ask this is because I noticed when I turn on the laptop it takes ages and maybe a bit slower due to the fact that it is half of the hard drive on drive C. So I want to know how it is easy to add them together into one so that I can get fast and pure to my new Satellite P500-024 performance.

  Thank you.

  Hi tagvic!

  First of all I must say that the two partitions have nothing to do with the slow start procedure on your laptop. Your laptop will be no faster if I you have only one partition, made it s! In addition, the second partition is required for Toshiba HDD recovery option. You know about it?

  HARD drive recovery option is really nice. You can restore factory in a few minutes. For it pour l' utiliser use go from the advanced boot menu, and then select Repair my computer. Then, you can select this option and follow the instructions on the screen. The first partition will be deleted, and after that it will have installed an image of factory settings. This means that you return to the same state that you started the laptop, the first time. The operating system preinstalled with already all the drivers and tools are installed.

  In my view, there is another reason for the slow start to the top. You should try to remove Toshiba Tempro. On my computer it causes a slow start too, and after removing the laptop started much faster.
  I can also recommend you to clean the system using CCleaner and defragment the HARD drive. Removal of startup programs folder that you don't need and try another program like AntiVir AntiVirus.

  I hope I could help a bit.

• How can satellite L650-170 - I change the language of Windows 7?

  Hello

  How can I change language Windows 7?

  I'm installing first in Dutch and I want to re - install in french.
  When I go to the recovery system, its installation still in Dutch.

  Please someone help me?

  Thanks, sorry for my English.

  Satellite L650-170

  Hello

  As far as I know that it is no longer possible.
  If you have selected the language, you will need to use the language that was chosen originally.

  I not quite sure of this workaround, but check if this m:
  -create a recovery disk (using the software creator on the laptop recovery disk)
  -use the recovery disk to reinstall new OS
  -Check if it would be possible to change the language.

  Welcome them

• Can satellite P300 - I connect to a TV and control?

  Can I connect my Satellite P300 to TV hdmi-cec and control the laptop with the tv remote?

  Hello

  Connecting via HDMI cable should t be a problem. Just buy a high quality cable and connect both devices. With FN + F5, you can switch between monitors.

  Unfortunately I think that it of not possible to control the laptop through TV remote. The TV remote is designed for your TV, not your laptop. ;)

• Satellite P300-156 - driver detected on \Device\Ide\IdePort1 controller error

  Hello

  I have recently installed a secondary hard drive in my P300-156 and am having some problems with it. I get 11 event IDS in the event log system "the driver detected a controller on \Device\Ide\IdePort1. error" and suffer with very poor performance with this player.

  The drive is new and works fine in other systems and even works ok if I swap bays my P300-156, but the problem with this is that the drive does not fit in the other Bay, as it is quite thick. The player in question is a Samsung HM100UI 1 TB 2.5 "Sata. I also tried other readers in this Bay, and they work well too.

  I am using windows 7 ultimate and the Intel chipset drivers. It's an Intel ICH8M SATA AHCI controller, the 7.0.0.1013 driver version. Have tried different drivers and the AHCI/IDE mode. Also tried a new installation and the problem persists.

  Am at a loss why this disc problems is there anything else someone can suggest to try?

  Thanks in advance.

  > I also tried other readers in this Bay, and they work well too.

  This means that you had problems with the other drives in the second span?
  If Yes, then I guess some problem of compatibility between the P300 and the HARD drive