How copy/paste or copy/move a file to another folder in Windows XP

Similar Questions

• I can not move the files to a folder in windows XP, only to copy them, and I get the windows error. This happens on any file or folder.

  I use XP Pro SP 3 and I'm having a problem with moving the files from one folder to another, no matter where the folder or files. If I try to move a file, it crashes and it cannot be opened or used. If I move a folder, then crashes all the contents of the folder, and I can't even open the folder, it tells me access is denied, this nothing else. If I try to delete the file, then I get a prompt to error telling me that the file or folder is not accessible, and that access is denied and "make sure that the disk is not full or write protected." If I try to move the files corrupt in another folder, this time I get the message "Unable to move or replace" the file in question and "make sure that the disk is not full or write protected." If it is a document as a text file, then I can open the file and there is a prompt indicating that access is denied. I can then use the text document and save something, but if I close the document and then try to reopen it, all the changes are lost.
  It is not this problem if I move the files to an external device or disk drive.
  I am running as an administrator.
  Right now, if I need to move a file, I copy it to its destination, which is possible and then delete the original file. With the help of a release program was the only way I could delete these files, which could no longer be used.

  Hello Closrapexa, welcome.

  1. do you have this problem started recently?

  I recommend trying the system restore to bring the system back to a State before the problem started. Try this:

  1. click on START

  2. click on "all programs".

  3. click on "Accessories".

  4. click on "system tools."

  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to copy a .jpg file in another folder I get an error "unexpected error prevents the operation."

  This is the error I got trying to copy a .jpg file in a different folder.

  An unexpected error prevented the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem:

  Error 0 x 80070021: the process cannot access the file because another process has locked a portion of the file.

  Any help is very appreciated.

  This is the error I got trying to copy a .jpg file in a different folder.

  An unexpected error prevented the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem:

  Error 0 x 80070021: the process cannot access the file because another process has locked a portion of the file.

  Any help is very appreciated.

  Apparently, Windows has a problem to download files larger than 50 MB.  To resolve this issue, follow these steps:

  In a security update, Microsoft has limited the size of files that can be downloaded from the remote folders to 50 MB. To increase this, you must change a registry setting.

  1. Download FileSizeLimit.reg
  2. Double click on FileSizeLimit.reg
  3. If necessary, enable the registry editor to run
  4. Click the Yes button to allow the changes need to be made
  5. Click OK
  6. Restart your computer

  For more information, please see the Microsoft article 900900 Knowledge Base.

• "The file is too large for the destination file system? How to move this file to another folder with this error?

  Working with Windows 7. I'm trying to move files to other readers. . What is the work around whan "" the file is too large for the destination file system"is the error messages. Can it be fixed so you can move the files

  Either there is not enough space on the destination or the size of the file is larger than the destination system can accept, for example FAT32 cannot have a file size more than 4 GB.

• Move the files to another folder

  I have lightroom five on my macbook pro. My files are on an external drive. I can put photos, that I can't do is move files in different folders.

  What error messages do you, if any?

  It's important for drag-and - drop: once you have selected some images (images become light gray), you click and drag on the part of the image, not the framework.

• How to build and publish webhelp html files in another folder than the default folder

  Hi all

  I'm new to using robo. I have a requirement to build and publish webhelp html files in a different folder from the default folder.

  Could someone tell me please the steps to change the folder

  Thank you

  Rashmi

  You change the name in the first field in the first page of the wizard and the file to generate. It must be a folder on your hard drive.

  You change the publication record in the last page of the wizard. Wherever you want to.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• How can I print a copy of the files in a folder - not each file - just the list

  original title: list of print files

  How can I print a copy of the files in a folder - not each file - just the list? List of cases of printing

  How can I print a copy of the files in a folder - not each file - just the list?

  Karen's directory printer (free)

• How can I move a file to another AI work/text in Illustrator 4.1? ART EXPORT and IMPORT ART and ART of the PLACE do not work.

  How can I move a file to another AI work/text in Illustrator 4.1?  Using the art of export, import or the art of the place don't give me image.  What transfers is a rectangular box with a big X in it.  Illustration of the song gives me only a distorted picture.

  If it really is version 4, it is 25 years old. I'm surprised you have install much less run. Then copy and paste does not work? These files generated in V4 or newer files? The really only files up to V8 may be opening in V4. After that, the format of file completely changed.

• Cannot copy the driver files in the folder of the Windows driver

  Title: windows 7 drivers
  Hello

  I am trying to copy a driver file in the folder of the windows driver, when I get the message so I pantyhose administration required and when I OK this file does not copy, even if I am logged in as an administrator and in the properties of the folder admin log also scored as the owner.
  I am trying to install a virtual CD-ROM, which is a Microsoft product.
  Can anyone suggest a way around that?
  Thank you

  See if that solves your problem to get a virtual CD-ROM in Windows 7...

  http://www.pctips3000.com/how-to-enable-virtual-CDDVD-ROM-drive-in-Windows-7/

• Buttons to copy from one file to another

  Seriously, I don't come to you guys for help until I've completely exhausted my sources online!

  I want to copy my buttons and their functions of one file to another with out having to recreate them each time.

  Is there a way to do this?

  Forrest

  You could put the buttons and their code in the same framework (or pair of over/under frames) and copy/paste the image from one file to another.

• Move icon missing in the files downloaded in the clouds, so how do I move a file in a folder?

  Move icon missing in the files downloaded in the clouds, so how do I move a file in a folder?

  If you are on the page of files where all your files and folders are listed, then there are two ways to move:

  The thumbnail (can only move a file or folder at a time):

  • Click the triangle to display under the thumbnail.
  • In the options that appear, select the Move button.

  

  The list view (can move several files and folders):

  • The check boxes for the files and folders that you want to move.
  • The menu bar at the top left changes has a Move button.

  

• Move multiple files from one folder to another in SkyDrive?

  How can I move multiple files from one folder to another in SkyDrive?  When I click on a file, & then use CTRL-click on another file, it moves to that one.  Can I select multiple files & copy or move or rename on PC?

  For now - not.  SkyDrive Wave5 or anyone should have this ability when it is fully released.

  http://www.LiveSide.NET/2011/09/06/SkyDrive-wave-5-to-finally-support-multiple-files-selection/

  (Read and also read comments on things, you might be able to use now to accomplish what you want).

• How to put pictures of file to the folder in windows 7

  Images, I want to move image files in a folder.  How do I in a way much less time creating a folder, then drag each picture in it?  400 photos take forever!  I'm a novice at this business of the computer.

  After using a keys ctrl + together if you want to deselect multiple files to the list of list or a folder that also got selected with select all methods,.

  Hold down the CTRL key again and left click, the files or folders or point your Cruiser files (depending on how your mouse is put in place to select the files), you don't want to move or copy to the new folder.

  Make a right click dragging you offers four choices, move to / copy / create a shortcut for / and cancel.

• Permissions do not update every time that a user moves a file from one folder to another in the Windows XP computer.

  Original title: folder permissions to move or copy.

  I have a problem that I'm sure has a simple explanation but I don't know.  I have a folder in the tree that whenever a user moves a file from one folder to another, the permissions do not update.  Yet if a user copies the folder to the same location, permissions to update as expected.  This only happens with XP.  If I try with Win 7, if the user moves or copies, update permissions.

  Has anyone seen this or have an explanation?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• Move the file in the folder of the same name in AppleScript

  I had a problem with the script below. Basically, on the execution of the script, I want to create folders based on the name of the file and move the files in the files of autocorrelation. However, at the minute, that I'll have to choose the folder in which the script should run.

  Folder to choose a folder

  say application 'Finder '.

  located fileList to the name of every file in Folder with name extension is "m4v".

  end say

  the value point text delimiters to ".".

  Repeat with dittos in list of files

  get each text element of dittos

  masterFile defined in the point 1 of the result

  say application 'Finder '.

  create a new folder to Folder with properties {name: masterFile}

  move (each file from the folder Folder whose name contains masterFile) will cause

  end say

  end Repeat

  Ideally, I would like it to run automatically, but the folder is on an external hard drive. (\Volumes\Lacie\Movies). and I had problems to use the POSIX and 'alias' to properly re-create the path of the file desired.

  Any help would be greatly appreciated. Thank you!

  Hello

  You can try something like the AppleScript script which is a simple shell script wrapper.

  set d to (choose folder)'s POSIX path
  do shell script "/bin/bash -s <<'EOF' - " & d's quoted form & " 2>&1
  cd \"$1\" || exit
  shopt -s nullglob
  for f in *.m4v
  do
      m=${f%.*}
      [[ -d $m ]] || mkdir -p \"$m\" || continue
      mq=$(sed 's/[^[:alnum:]]/\\\\&/g' <<< \"$m\")   # quote meta characters for regex
      find -E . -depth 1 -type f -iregex '.*/'\"$mq\"'.[[:alnum:]]+$' -print0 | xargs -0 -J% mv % \"$m\"
  done
  EOF"
  

  For example, given that you choose/path/to/directory in the folder - source

  Input state:

  /path/to/directory/abc.m4v
  /path/to/directory/abc.txt
  /path/to/directory/abcd.m4v
  /path/to/directory/abcd.txt
  

  Status of the output:

  /path/to/directory/abc/abc.m4v
  /path/to/directory/abc/abc.txt
  /path/to/directory/abcd/abcd.m4v
  /path/to/directory/abcd/abcd.txt
  

  Briefly tested under OS X 10.6.8 but no guarantee of any kind. Please make sure that you have a full backup of the original files and directories before you run this kind of script.

  Good luck

  H