How data travels in the iSCSI Configuration

Similar Questions

• How can I open the system configuration

  I am running windows xp (version 2002).  How to find the system configuration?

  There is no 'system configuration' in the Panel (at least on my system).

  There is a System option which open to the System Properties screen.

  If mean you the System Configuration utility, click Start, run, and in the type box:

  Msconfig

  Click OK to open the System Configuration utility.

  If you want to see on your current XP configuration information, click Start, run, and in the type box:

  Msinfo32

  Click OK to open the System Information applet.

  It's the same thing you see if you click on start, programs, accessories, System Tools, system information.

• Configure button disabled on the playback device, manage audio devices. How can I reactivate the button Configure?

  Hi, following an automatic update of Windows Vista 64-bit I have no sound. Thank you for that.   I had a similar problem before, the sound quality has been reduced to a rate lower than 16 bit 44.1 k.  I've changed this before clicking on the button configure on the playback device, manage audio devices.  But now, this button is disabled and I can't check the set up or make changes.  I am logged in as an administrator user, how to re - activate the button set up?

  Thank you

  Darren

  Hello, I have stopped the Windows Audio Service and rebooted a couple of times.  Now I have his back.

  Thank you

• The dates pasted on the screen configuration

  my daughter has tried to shut down his computer and the configuration of message dates stage 3 of 3 0% complete do not turn off your computer come, she waited and waited but nothing happened while she had to turn it off. We tried to turn it back on the same message is there, I left it on more than five hours, he continues to go to blue screen dark with microsoft corpoation at bottom then she goes off with a thenmicrosoft arrow logo, it seems, and then the blue with the message screen on turns. What can we do?

  http://support.Microsoft.com/kb/949358

  http://www.ANGUAS.com/?p=47

• How can I delete the previous configuration of Essbase Server Shared Services?

  Hi all

  I am trying to reinstall the Essbase Server (on a new server we have upgraded the Essbase server hardware) and reloads the data, but the current installation believes that I have already set up despite the withdrawal EssbaseCluster-1 of Shared Services Application groups.  Is there something else I need to do to get the new install Essbase server configured as a new instance of Essbase?

  Thank you
  Ryan

  If the server names have been changed, then it probably won't work, but I don't know what you mean that it did not work, you should check the registry of shared services, other possibilities are reset configuration tasks in the registry by using the epmsys_registry utility.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• I downloaded service pack 3 and it changed and took some of my programs.how can fully restore the initial configuration and start over?

  I downloaded service pack 3 and it changed my programs taking some. How can I reset and delete and go back to factory settings and start over?

  Hi Daddyguy,

  Please read this article which gives detailed instructions on how to restore Windows XP to a previous state. http://support.Microsoft.com/kb/306084

  I hope this helps. Just reply to the results.

• How can I find the software configuration screen in the Photoshop Elements product trial?

  How can I get to the screen of the Photoshop elements 11 software trial product (to convert trials in paid)?

  If you are in the application test, so whenever you launch Photoshop elements Editor, it will give you the ability to serialize your product.

• Translator does not load the invalid configuration information ASP.htm

  I got this message when you start dreamweaver this morning: "Translator unloaded, invalid configuration information ASP.htm" How can I get the valid configuration information? I have reviewed the file translator ASP.htm, and from what I could tell, it was not damaged.
  
  Thanks in advance,
  
  Richard

  I solved the problem to delete the winchachexxxx.dat file. The error message were not protesting again.

  Rick64t

• Two modules of acquisition data and channel with API configuration

  Hello

  I use two DAQ PXI 6251 and 6259 in VI, I can use the NI DAQmx channel creation for the AI of two channels PXI or how do I use the channel configuration?

  East - the correct Dev2ai0:16, Dev3:8?

  Hey KRAZE4LV,

  This is the VI in 2010.

  Kind regards

  Kira T

• How to increase the size of the iSCSI data store?

  I try to add an iomega StorCenter as an iSCSI target.  I added the storage card which indicates the total capacity of 8,13 TB in vSphere Client (it looks like the right size).  Now when I add the data store, however, is that there only 128,75 GB of capacity (this is where the problem).  How can I recover the full space available?  It's almost as if I need to increase size of partition or something, but I don't know how to do this.

  Also, if I click on the data store > properties, the increase... button opens a dialog box, but there is nothing for me to choose.

  System / / desc:

  ESXi 4.0

  3.33 VMFS datastore file format

  Max file size: 256 GB

  Block size: 1 MB

  (This does not have room for the VDR backups)

  Welcome to the community - ESX 4 only supports storage of 2 TB - 512 B data - you will need to carve up the storage being presented in LUNS which are smaller than 2 TB - 512b

• I can't read the words of the security and the sound does not work. How can I complete the configuration of the synchronization?

  How anyone can read the enigmatic words for synchronization of the configuration is beyond me. Just audio does not work. If not, how can I transfer my cache settings, including passwords for sites in my new computer?

  Hello

  You can try after some time. To check possible synchronization problems, please see this.

  Alternatively, you can manually transfer the necessary personal data.

• How to save data quickly to the high sampling frequency

  Hi all

  I use a structure of producers and customers to measure and record the data. The sampling rate must be as high as 10 kHz. Given that so much data, it takes a long time before the data is saved. At first, I saved the data in an excel sheet. Then I tried to save it in binary, but it still takes a while to complete save. How can I make the time savings a short circuit?

  Thank you

  The best

  First we will make some corrections to your DAQmx code.  Since you are using continuous sampling, do NOT connect the samples per channel.  Which is actually limiting your buffer.  And there is really no need to define your buffer size either.  It is default to very big, so this isn't a problem as long as you read your data quite often.

  Now your data connection... You simply create a very wide range while acquiring data.  Then, you save the data.  It's actually not through the advantage of using the producer and the consumer.  You should save your data in the loop of the consumer.  It will be elinate need a lot of memory and you save the data to the file while you are buying.

  But, in this case, I say that the producer and the consumer is not even necessary.  Use the DAQmx Configure registration VI.  With this VI, you can tell DAQmx to disseminate all data directly in a PDM file.  You don't have to do anything.  It is by far the best way to save on your DAQ data.

  

• How can I get the data from a range of AutoFilter in Excel?

  I have a spreadsheet with a large number of lines (5000) where I want to extract data.  I have opened the workbook successfully, configure an automatic filter and filtered the data to select the data corresponding to the criteria using the nodes property of the ActiveX Excel object and invoke.  I now have to enter the selected data in a table for later processing, and this is where I am stuck.  Help Excel online seems to suggest the creation of a Range object by using special cells with the xlCellTypeVisible type.  If I Range.Count I get the right number of cells, but Range.Value2 produces a variant which contains only the first block of data (a beach filtered automatically seems to consist of several non continuous blocks).  Anyone know how I can read the contents of the range in an array of strings?

  Thanks in advance

  Ken

  IT SOLVED!

  Found a calling areas of property which returns a collection of the areas of each of them continues a range object.  Simply cycled through these areas using the earlier technique, build the table I want.  See below

  

  Thank you

  Ken

  PS I can KUDOS

• How to transfer information from my laptop to my data traveller or flash drive?

  Original title: IM having a blond momet LOL

  How to get information from my laptop to my data traveller or flash drive not sure leave which is the correct name

  Hi DeborahCoffin,

  You can try dragging them on, or you can insert the USB key, right click on the file/folder you want to copy, then select COPY. Then find your USB drive icon, then right-click again and select PASTE.

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

• How do you use the freqout as the sample clock to write data on the of 6224 PCI

  Using PCI-6224, I try currently to export data using the freqout as a reference clock sample to a digital output channel. I plug the scope to see the clock on the freqout PIN. However, the data seem to be missing. How can I output the data correctly using the reference for timing? What am I missing that connects the two signals together? Any help would be greatly appreciated. I am writing this code in MS VS C++ and here's what I've done so far:

          int32       error=0;
          TaskHandle  taskHandle=0;
          TaskHandle  taskHandleFRQ=0;
          char        errBuff[2048]={'\0'};
      uInt8       data[8]={1,0,1,1,1,0,1,0};
  
      /*********************************************/
      // DAQmx Configure Clock
      /*********************************************/
      DAQmxErrChk (DAQmxCreateTask("",&taskHandleFRQ));
      DAQmxErrChk (DAQmxCreateCOPulseChanFreq(taskHandleFRQ,"Dev2/freqout","",DAQmx_Val_Hz/*Units*/,DAQmx_Val_Low/*IdleState*/,0/*Delay*/,10000/*Freq*/,0.5/*DutyCycle*/));
      DAQmxErrChk (DAQmxCfgImplicitTiming(taskHandleFRQ,DAQmx_Val_ContSamps,8));
  
      /*********************************************/
      // DAQmx Configure Digital Output
      /*********************************************/
      DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
      DAQmxErrChk (DAQmxCreateDOChan(taskHandle,"Dev2/port0/line0","",DAQmx_Val_ChanPerLine));
      DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"/Dev2/PFI14",10000,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,8));
  
      /*********************************************/
      // DAQmx Write Code
      /*********************************************/
      DAQmxErrChk (DAQmxWriteDigitalLines(taskHandle,8,0,10.0,DAQmx_Val_GroupByChannel,data,NULL,NULL));
  
      /*********************************************/
      // DAQmx Start Code
      /*********************************************/
      DAQmxErrChk (DAQmxStartTask(taskHandleFRQ));
      DAQmxErrChk (DAQmxStartTask(taskHandle));
  

  I think that the original code was operational. However, given that the data transmission has been set to finished, I had a hard time to visualize the data on my scope. By changing the value of DAQmx_Val_FiniteSamps to DAQmx_Val_ContSamps, I could easily see the data.

  My mistake. I'm still learning here. Thanks for the time.