How do I automatically the reord student's progress

Similar Questions

• Chart: how to set automatically the scale of the axis Y

  Hello

  As you can see below, I have a truncated whith graphic bar, they go beyond the top of the chart, but traore are cut.

  For example, 'The Chatel Heath' has a value of 35.

  I want to the scale of the y-axis to be set automatically according to the largest value.

  How to do? I use APEX 5.0.1.

  

  Kind regards.

  Chipniz wrote:

  As you can see below, I have a truncated whith graphic bar, they go beyond the top of the chart, but traore are cut.

  For example, 'The Chatel Heath' has a value of 35.

  I want to the scale of the y-axis to be set automatically according to the largest value.

  How to do? I use APEX 5.0.1.

  

  The behavior of default graph is automatically calculate the scale of the axis, which seems to indicate that your existing chart settings are responsible for this. You use custom Axes or XML parameters in the table?

  Reproduce the problem on apex.oracle.com is the best way to get help with problems of this kind.

• How can I change the subscription student photography to the CC one student?

  I'm already subscribed to photography 'Pack' for students, but I want to change it to the full Version of the CC (not that normal) student.

  How would I be able to do?

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• I chose the evil plan (single ap). How to move to the right (student) plan?

  Hi all

  Thanks in advance for your help.  I am a student at a community college.  A little over a year ago, our program, we had to register for the creative cloud.  We were told that it was about $20 a month, so I chose the accidentally one badly.  I had the unique plan of ap.  It wasn't a problem while I only need photoshop.  However, now I need flash too.  I don't want to lose the ability to work on photoshop, as I still need.  How do the student plan?  I currently have some homework to fill this week that requires Photoshop and Flash. Thanks again for any assistance.

  -Shan

  Single update for all http://forums.adobe.com/thread/1235382 clouds can help

  OR

  Cancel what you have and buy new

  Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• How can I automate the numbering of pages between different files?

  I use InDesign CS2

  to set up a magazine.  The magazine has about 50-60 ads in it, and each ad is in a separate file, until the magazine is assembled.  There is a guide at the end of the magazine that show the basic information in a format of grid on advertisers in the magazine.  The formatting for the grid is controlled with tab stops to reinvest as advertisers come and go from point to point. I need to add a new column to indicate which page the ad associated with the entry of the grid is on, but I can't find a way to automate it.  The only solution I have found so far is to copy the phone number of the advertiser and to find other bodies in the magazine once it is assembled.

  Is it possible to automate this task, remembering that these ads are all contained in separate files until the magazine is assembled? I find the help topics on the subject of indexes, hyperlinks, bookmarks, etc. to be very confusing and not very useful.

  KeithDale wrote:

  Ads can be placed in InDesign, because I have CS2.  Copy us the ad and paste it into the magazine.  This seems to prevent continuous history references because they must be put in place in the same file. Establish links once the ad is placed in the ad is useless, because it will be broken once the announcement is moved to another file and will take more time than to just do a search for the phone number.  I was oping there will be a way to put in a kind of anchor or something which will be updated automatically when an ad is placed in the magazine.

  It depends on how save you or receive outside ads. These days most advertisers submit PDF, but that you're creating ads to identity card and recording in native format. Personally, I save the original work in .indd for future editing, but export a copy in PDF format and the place to display ads. You can place the PDF file in different numbers as much as you like and there is no risk of leaving anything out when you copy and paste.

  In addition, more information on the guide as only the page numbers there.  I need to have page numbers fit in the existing format to make it work properly (obviously, I'll have to add a column). A table of contents can contain all of these additional data?

  

  It's not what I was picturing, so, no, I don't think that OCD would help a lot.  If you upgrade to CS4 you can probably use cross references that are now a native function. In CS2, you might be able to at least semi-automate paging using the cross-reference of sectors de Jong script: Script for referrals, including a tutorial on how to use it (updated April 10, 2006)

  I can't imagine an easy way to do it in any version, i.e. anything that doesn't require not to add some sort of marker to each announcement and perhaps update the table if things are moving (that part is not onereous - just run the script again). Maybe someone else has another idea.

• How to apply automatically the archivelog on y standb

  Hello
  
  I don't know what I've missed.
  I have prod and stb dba time on linux version 11.1.0.7. I think I installed everything correctly, but today I checked archivelog standby all the 3 weeks ago back.
  
  I put on prod rman:
  Configure archivelog deleteion policy to applied on all the standby
  but it does not work because archivelog are not applied pending
  
  I run in standby mode
  RMAN > delete archivelog until ' sysdate-2';
  
  but I got an error: RMAN-08120: WARNING: log archived not deleted, not yet applied watch
  
  So I have to run
  RMAN > database recovery (all archivelogs were applieed standby)
  and now I'm able to remove by the above command.
  
  But I need to automatically put trought setting ' configure archivelog applied political deleteion pending all the»
  
  How do I do that?
  
  Thank you.
  
  Kind regards
  Tom

  The RMAN behavior is only a symptom, but not the real problem. If archivelogs are shipped to the waiting, but not applied, are sure to apply is turned on?

  ALTER DATABASE RECOVER MANAGED STANDBY BASE DISCONNECT FROM THE SESSION.

  Werner

• How can I automate the NTFS permissions?

  Our directory structure has redundancy: C:\Project1, C:\Project2, C:\Project3, etc.
  Under each folder of the project, the subdirectories are similar: C:\ProjectX\Sub1, C:\ProjectX\Sub2, C:\ProjectX\Sub3, etc.

  We would like to allow to assign permissions to subfolders different NTFS, once the main project folder is created. By example, if I create C:\Project1, I want these subfolders to create and with these permissions:

  • C:\Project1\Sub1: Write privs to Group1
  • C:\Project1\Sub2: Reading only privs for group2
  • C:\Project1\Sub3: Write privs to everyone

  I think that this should be done either through Group Policy or script (even if other alternatives would be appreciated). Could someone give us help on how this started? References would also be appreciated.

  Thanks in advance.

  Hello

  The question you asked is best answered in the Technet Forums.

  You can post your questions here:

  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

• How to select automatically the power of java card applet to the top?

  Hello, I want to select an applet where put on. Is this possible?

  Hello

  You should read on the privileges of the application (Chapter 9.1.2 Application privileges coding in http://www.win.tue.nl/pinpasjc/docs/Card%20Spec%20v2.1.1%20v0303.pdf). In General, when you send the command 'install to install' during the instalation of the applet, you must add privileges of request bytes (length of 1 byte and the value of 1 byte). For example, the application with 0 privileges x 04 will define your applet by default selecteable (in other words - automatically selection under tension).

  Concerning

• How to select automatically the other each Clip?

  I'm running 5.5 and I am currently doing a slideshow (photos, music, ken burns). I have 40 minutes of footage, which comes out to about 400 individual photos. I need to apply Ken Burns to each image. I created and saved several Ken Burns presets, and now my problem is applying these presets for the clips. I need a way to automatically select every fourth clip. I don't want to sit here and count one, two, three, four clamps forward, then select manually then go again one, two, three, four, then shift click, and so on and so forth for 400 photos to apply this effect. Is there a faster way to do this? Any ideas?

  Unfortunately, you're stuck with doing so manually.

• How can I automate the process of replacing these. PNG in my art?

  I have a very large project, that I'm in the middle and it becomes very painful to have to do these one by one.

  

  I've already sorted 'go - to'.psd I copied and pasted into all subdirectories of name-based. Now, it's just a matter to recreate with the insignia of various clans and tartan as well as their name. First of all, I was wondering if there is a way to bulk to replace the badge 'clan '. PNG is even if they are all named differently by their clan.

  If this is possible then it is perhaps possible to replace the tartan aswell?

  What is the name, I have files delimited by tabs that crank out every spelling of the name clans individual once the main file has undergone all the work described above. I.O. If the clan has a common spelling of 'Auchinleck' but also goes by, file in step finals Affleck, Auchinlech, Aachnaleck, Auchinlick, then these will all be taken care of with the tab -delimited.

  
  

  No control of Photoshop help would be most appreciated!

  So you're a candidate to learn scripting.

  Windows and Mac have an internal scripting language and Apple, PowerShell script respectively.

  Photoshop can also use the script. Visual basic script on Windows and on Mac Apple script. Windows and Mac can also use JavaScript for Photoshop.

  In the Photoshop script forum are links to learn more about writing scripts.

  Photoshop scripts

• How can I cancel the plan student and teacher of Photoshop for a year (paid monthly) when there is no Cancel button, shown under my account?

  The production plan shows that my plan has expired. He onlys gives me the possibility to reactivate my plan, but not giving the opportunity to abandon this plan. My payment method has changed, and it's a Chinese credit card. Please direct me to the General conditions of subscription, because I have already seen, and it offers no solutions to my situation. In addition, please do not give me the link where he resumed the contact me page. I want real solutions. Thank you!

  In order to cancel the order, please contact customer service

  You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  For more information on cancellation: cancel your creative cloud membership

• How can I automate the creation of a partition from scratch for a large number of hosts?

  I would like to help with the following steps to cerate a partition scratch on all hosts that have no script, then reprot back to me which guests were to have created.

  all my ESXi hosts have a LUN to start with the space, all the boot LUN are named with the same naming that is conveiton "hostname-localstorage.

  I would like to come up with a script that will check each host in a cluster for a partition of scaratch, if it does not create the folder ".locker -hostname" on local storrage and then set the partition scratching to the new location. Then the new report to me, which is already a partition from scratch and those to whom he owed create a parition scratch to so I can plan then a good time to put the hosts with newly created partitions scratch mainenance mode and restart their.

  I glued the manual way to do it below. I'd appreciate any help anyone can give and it will be well appreciated. I try to avoid to do 1000 hours below. Thanks in advance...

  Note: Before you begin, make sure that/tmp/scratch exists. If it does not exist, create it by using the command #mkdir/tmp/scratch.
  1. Open a command prompt where the PowerCLI is installed.
  2. Connecting to host ESXi using the command:
     
     connect-viserver ESXHostnameOrIP
     
     
  3. A list of the data stores accessible by using the ESXi Host command:
     
     Get-Datastore
     
     
  4. Mount a read/write as a PSDrive data store using the command:
     
     New-PSDrive -Name "mounteddatastore" -Root \ -PSProvider VimDatastore -Datastore (Get-Datastore "DatastoreName")
     
     
  5. Access the PSDrive new using the command:
     
     Set-Location mounteddatastore:
     
     
  6. Create a directory named only for the ESXi host using the command:
     
     New-Item "DirectoryName" -ItemType directory
     
     For example:
     
     New-Item ".locker-ESXHostname" -ItemType directory
     
     
  7. Check the current value of the ScratchConfig.ConfiguredScratchLocation configuration with the command option:
     
     Get-VMHostAdvancedConfiguration -Name "ScratchConfig.ConfiguredScratchLocation"
     
     
  8. Change the ScratchConfig.ConfiguredScratchLocation configuration option, specifying the full path to the directory created in step 6, using the command:
     
     Set-VMHostAdvancedConfiguration -Name "ScratchConfig.ConfiguredScratchLocation" -Value "/vmfs/volumes/DatastoreName/DirectoryName"
     
     For example:
     
     Set-VMHostAdvancedConfiguration  -Name "ScratchConfig.ConfiguredScratchLocation" -Value  "/vmfs/volumes/Datastore1/.locker-ESXHostname"


  9. The ESXi host in maintenance mode and restart so that the configuration change to take effect.

  Mike P

  I have something similar to use the script below.

  I think you'll find that your out in there.

  $configName = 'ScratchConfig.ConfiguredScratchLocation'
  
  $mode,$warn = Get-PowerCLIConfiguration | %{$_.DefaultVIServerMode,$_.DisplayDeprecationWarnings}Set-PowerCLIConfiguration -DefaultVIServerMode "Multiple" -DisplayDeprecationWarnings:$false
  
  Get-VMHost | where {$_.ExtensionData.Config.Product.ProductLineId -eq "embeddedEsx"} | %{    Connect-VIServer -Server $_.Name -User root -Password MyPswd    $scratch = (Get-VMHostAdvancedConfiguration -VMHost $_)[$configName]    $tgtName = ".locker-" + $_.Name.Split('.')[0]    if($scratch -notmatch ($tgtName + "$")){        $ds = Get-Datastore -VMHost $_ | where {$_.Name -match "localstorage"}        if($ds){            Set-Location -Path $ds.DatastoreBrowserPath            New-Item $tgtName -ItemType directory            Set-VMHostAdvancedConfiguration -Name $configName -Value ('/vmfs/volumes/' + $ds.Name + '/' + $tgtName) -Confirm:$false            Set-VMHost -VMHost $_ -State 'Maintenance' -Confirm:$false            Restart-VMHost -VMHost $_ -Confirm:$false            Set-VMHost -VMHost $_ -State 'Connected' -Confirm:$false        }    }    Disconnect-VIServer -Server $_.Name}
  
  Set-PowerCLIConfiguration -DefaultVIServerMode $mode -DisplayDeprecationWarnings:$warn
  

  It uses the DatastoreBrowserPath that Vitali has suggested.

• How can I automate the reduction in the size of a large batch of PDF files?

  I have to deal with more 40 000 images PDF created with a high value of IPR.  The collection occupies 1.4 TBS of space.

  We experimented with reduced file size and PDF files that are less than 10% of their original size.

  We use Acrobat Pro XI.

  Please also describe if amethod exists so that this transformation performed in the cloud.

  Thanks in advance

  Jack Dunn

  There is a Wizard of Action in Acrobat Pro who can multiple lots

  files in the same way, but from my experience (and the own words of Adobe) is

  not suitable for process files a lot. You should look for

  third-party solutions for that. In addition, it is not available as a cloud

  service and cannot be fully automated (that is to say you need to trigger manually).

• How to insert automatically the numbers of

  Hi friends,
  
  I have a table with a column sl_no create table t1 (sl_no number (10))
  
  I need to insert values 1-5000...
  How do I do that?
  pls help

  INSERT INTO SELECT FROM dual CONNECT BY level t1 level<>

• How to adjust automatically the content of word template?

  I was curious to know if there is a way to use 'auto fit to content' on the model. I use the xml editor to generate the output to .pdf format.
  
  Published by: [email protected] on April 28, 2009 07:15

  Hello

  Try to do this: on your table/field...

  Table-> cell-> Options tab properties (it should be "text Wrap / made" checkboxes here)

  Kind regards...