How do I create redundant (or mirrored) virtual servers?

Similar Questions

• How to create redundant virtual machines 2

  Hello

  I need to create redundant virtual machines 2 (one online and one offline). 2 virtual machines should be syncronizied.

  How would I do so that my main VM is down for some reason, my other virtual computer could kick

  Thank you

  VRanger quest vReplicator/connection will do the job and is usually very effective when using change block tracking (CBT), allowing it to determine which blocks have changed since the last replication much more quickly, which is useful for the large VMs. replication jobs can be scheduled quite frequently, so that it can not give you time real synchronization between virtual machines He can become close enough

• How can I create more space in my virtual memory

  How can I create more space in my virtual memory

  In fact this post with this link is pretty bad.

  Virtual memory used by xp as ram memory, however the memory or

  swap file is on the hard drive. For a pc of refrence memory from a hard drive is very slow

  compared to the RAM. Most of the technicians want to eliminate virtual memory as well

  as possible, making the use of ram pc instead. For a better link, go to.

  http://TechNet.Microsoft.com/en-us/library/cc751291.asp

• How can I create a USB Virtual COM Port

  Windows XP Professional / SP3 / 2002 Version

  How do I create a virtual COM Port to USB, so I can run software applications of a Bus USB flash Drive?
  The reason why I am eager to do it, is because I use an audio sequencer and it requires 1 GB of free disk space and at least 1 GB of RAM is recommended. My machine has 0.5 GB of RAM and a total of 6.55 GB of FREE space. My machine has a 256 MB RAM module and I bought another 256 MB RAM module. The manufacturer said that 512 MB of RAM is the maximum that can have my camera.
  My goal is to buy a 4 GB Flash drive and use it to add RAM on my machine. I am also wanting to be able to run software applications that are installed in the USB Flash drive.
  My basic goal is to install the DAW in the USB Flash drive and work with the program that is in the USB Flash drive, and I hope that will release of enough memory on my laptop.

  Hello

  Unfortunately, you cannot use a USB flash as a substitute for the RAM drive.

  Similar topics as an example with the info:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/can-i-use-a-USB-flash-drive/70cf81fa-D113-4485-8305-c030665eeac0

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/can-a-USB-flash-drive-be-used-as-an-external-RAM/d711a70e-6878-4552-933C-423fa04fb222

• How can I create a virtual device bootable USB to install Windows 7 on a hard drive?

  Hello

  Ho can I prepare a USB key, in order to to use, so that I can throw a Windows 7 Ultimate machine installed locally on a virtual drive?

  I don't want to change the BCD on the computer laptop e. (laptop running Windows XP)

  Kind regards

  BOGDAN Ciprian

  Original title: USB stick bootable laptop for Windows 7 VHD?

  Hi CiprianBogdan,

  Thanks for posting in the Microsoft Community.

  Want to know how you can create a bootable USB to install Windows 7 on a virtual hard disk.

  I would have you post your query in the TechNet forums because it caters to an audience of it professionals.

  Your query will be better addressed there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• How can I create a mirror from a photo image

  How can I create a mirror from a photo image

  Hi Malcolm,.

  Choose the crop tool in Photoshop Fix. Then choose 'Fip H' or 'Flip V' in the options of the harvest.

  Mike

  

• How to set up a "dummy" or "virtual" port

  Hi, I'm relatively new to Labview programming.  I work with the NI USB-6212.  I was wondering if it is possible to create a "dummy" or "virtual" port, so I can finally create a port for example line output. port0/line16.  Basically I want some bits to go to this line and the "status quo".

  Any suggestion would be appreciated.

  Thank you

  VK

  There are several ways to address the issue and how you will use this 'virtual' Port is one of the choice between the methods.

  The easiest way is to create a USB-6212 simulation:

  Interfaces and select Max devices

  Right click > create new > DAQmx simulated device or modular instrument

  Expand + M series: DAQ and select NI USB 6212.

  You'll be able to create scales channels etc. that are appropriate for a tasks OR USB 6212 assistant DAQmx will treat it as if it was true, and you can try the task and, LabVIEW code call a task on a simulated device will work just fine.

  The down side is when you actually get material its often difficult to retarget the tasks for using the real device (no option to send the task... no option to replace the device with...) Do not hesitate at the idea of Kudos. If you need to change the task or swap device names and which is not infallible.

  Another option that I use for my development (and, I code by intention... very rarely have any material or simulated in my cube)

  must care not the configuration of the task until I integrate with hardware.  Allows to set the example that I have in my current project:

  

  With the exception of the name of the task that this exact code is part of the project I opened today.  This AE wraps completely all I want to do with this task.  Now, I have the code to fall in my application and can create the easilly task on the target computer.  Notice of Here.vi? I'll just go through the hierarchy of the project and find all instances. Create the task and TEST IT on the live system.  When all instances of here.vi went my code is error free and integrated with the hardware running.

  [edit] it is what happens with a break in three hours while you answer.  Tim beats you to it

• How can I create a webshop with Muse in Hebrew?

  How can I create a webshop with Muse in Hebrew?

  [Begin by asking in the right forum]

  [Left non-technical Forum Lounge for forum specific program...] MOD]

  Have you looked at Shopify? I know they support virtually all languages.

  Then, use one of the Muse Shopify widgets to add it to your site.

• How can I create nested VMware ESXi in vCloud 5.5

  Hello

  I how can I create a VM ESXi nested within vCloud 5.5.

  I followed the instructions below, but it does not appear as an OS selected in the database, it creates only an option, but the drop-down list displays the 'other' os.

  http://basraayman.com/2012/03/01/enabling-nested-64-bit-virtual-hosts-on-vCloud-Director-1-5-using-MSSQL/

  Kind regards!

  I just stumbled upon this problem sort of.  I had it working in 5.1 vcloud, but upgrading to vcloud 5.5 caused all sorts of havoc.

  Looks like vCloud 5.5 added a drop down for the esx hosts in the family of the 'other', but it does not appear when you create a virtual machine, you must create it with some other reviews and then change the properties of the vm created for select esx guest.

  If you have added the SQL statements from this link, it will completely break vCloud because there will be two entries in the database for esx and he complain of a unique key.  You must change the database and remove what you added in the link above.  The tables are guest_os_type and guest_osfamily.

  Good luck!

• How can I create a new presentation of shop e-commerce in British Colombia? The default layout is inadmissible and who do not steal! :)

  Hello to everyone.

  I've been building and development using BC for awhile but avoids the functions of e-commerce like the plague, because of all my knowledge and trial a mistake, I couldn't adjust available outside the columns of the table how much I can add. I'm looking to create some sensitive stores but feel completely constrained by the store layout because it can't be adjusted. Yes I tried the same and adjustment module style sheet styles declare my rules with "!" important"with no luck. I then asked the team to BC online chat. If it was still possible, and they said 'no' dish. Then I saw 'light at the end of a tunnel' If you want by browsing a few Business Catalyst models (I honestly can't bring myself to use models that I like a lot of this building and landscaping my own pages). With this model here, the cameras and accessories you can see the shop features sensitive so I know it's possible (Damn you BCGurus and your mad skills). I also found some amazing layouts by Enough of Pollution , which has also made a few sensitive shop like this Web sitelayouts.

  Overall, how can I achieve this? How can I create a fully customized store page layout and virtually any custom also available? I have the feeling that I needed to learn the programming language for this liquid, but seriously, the indications at this point would be greatly appreciated! If I learn liquid programming, I'd love to learn where there might be some amazing courses / tutorials / documentation. I have the feeling, it comes down to create my own model of liquid layout and rerouting of the off-set modules in the new model... I'm on the right track?

  Sorry, so many questions. Let me tackle that I really want to know haha!

  
  
  

  • How can I create a layout of the sensitive shop in British Colombia?
  • What would be the necessary steps?
  • If I need to build models of liquids, where can I learn all this? (I know that the BC user guide has much butI will not lie, it's a little overwhelming)

  Thank you all so much for your time in reading this and I greatly look forward to learn more about Business Catalyst. Honestly, I'd love to try and use this platform for all of my clients.

  Hello

  Support will be have not said you that it was not possible, they would have told that it is outside the scope of their support. Is this possible? Of course, it's, it's the foundations of basic BC, HTML and CSS more then anything else.

  Honestly, it has nothing to do with incredible skill, amazing code or anything else.

  First of all, BC is just tags and you should use reference material:
  The developer reference

  Here you see the overall plan and tags. If you look at the list of product tags you see that you can set in a list schema (no tables).

  From there allows you to encode your small layout, large presentation cart layout, provision of registration (payment) because you need to and code the CSS to adapt.

  -You can float elements so float the li of the store

  -The basics of the CSS to make the elements of fluid width of code etc.

  -Questions from the media CSS code to make sensitive matters

  All pretty much toast front-end html, css, nothing special here development stuff. You have classes on the points for each element of a line in British Colombia according to the parameters that you set on the tags and so on.

  If you want to take the next step you enable liquid markup in the characteristics of BC and take things further.

• How can I create the page sizes personalised in InDesign when creating postscript files?

  Greetings ~ I have Mac OS X 10.8. How can I create sizes of custom page from InDesign when you create a post script file? Do I need a virtual printer?

  Is there a reason that you are not exporting to PDF directly from InDesign?

• How can I create a group through Outlook without the application Outlook email?

  How can I create a group by using Outlook without an application Outlook email?

  Sigmalambda wrote:

  How can I create a group by using Outlook without an application Outlook email?

  It is difficult to understand what you're trying to do. You can create a group and send an email to the group in any mail client. The recipients can use any e-mail provider or an e-mail client to receive e-mail. Please explain in more detail what you are trying to accomplish.

• How can I create a new folder in Thunderbird

  How can I create a new folder in Thunderbird

  Right-click on the parent folder, a new folder option appears in the menu

• How can I create a group in my address book?

  I am looking at the help page, and he has "contacts" in the list, but no link to something useful.

  How can I create a group? I want to send something to a group of people, but I don't want them to see all the other people who are part of the group.

  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Create_Mailing_List

• How can I create a trigger e-mail messages sets a phone when Gets an email from particulry?

  Hi team, support
  Customer email thunderbird whit, how can I create a trigger e-mail messages rule a phone dial when comes a word of the body particularly E-mail?

  Kind regards
  Alessandro.

  I don't think you can do this with ordinary Thunderbird. But this add-on

  https://addons.Mozilla.org/en-us/Thunderbird/addon/FiltaQuilla/

  allows you to run javascript or IIRC, launch an external program when a given filter condition is met. So this does not exactly provide an answer to your question, but allows a possible solution. '