How do I fax from vista Home premium 64-bit. I have a usb modem. __

Similar Questions

• How to get a windows Vista Home Premium 32-bit installation disc?

  My computer is an emachine T5086.  It has Windows Vista Home Premium and when loading drivers they stop loading at "windows32 drivers/crcdisk sys. I don't know what that means.

  Then, the computer restarts and asks me to install my windows installation disc for repairs.  F8 on reboot is not available as an option.  I don't have a repair option I turn on the computer and hold down the F8 key manually.  I don't have a windows disk or recovery disk and I can't to where I can find a restore either point.

  How to make a windows Vista Home Premium 32-bit installation disk?  I have my product key. Or where can I get one?

  Hello

  There are different methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact the manufacturer of your computer, eMachines and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://www.eMachines.com/EC/en/us/content/home

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How can I get Windows Vista Home Premium 64-Bit installed on Windows 7 Home Premium 32 - Bit?

  I decided to install Windows 7 on my computer for the 30 day free trial, but am now regretting it. I don't have the money to buy the product officially, so I want to reinstall my windows vista. I have the drive, but when I try to install the computer says that this version of windows is not compatible with it. How can I get my Windows Vista to install?

  Also, I currently have windows 7 Home premium. It is a 32-bit operating system and is running on Service Pack 1. The version of windows that I am wanting to return is Windows Vista Home Premium 64-bit.

  I can't make the method for using the windows.old as my uncle decided to remove after installation of windows. I have 13, but even, I knew it was a bad idea. In any case, I would really help with this question.

  Ranging from 32-bit to 64-bit is a single proposal for a NEW facility.

  You can boot from the DVD and erase your old installation (wipe, from scratch, all not saved disappeared and everything must be installed manually - including drivers for hardware devices and software you have installed now) and install Windows Vista x 64.

• Exporting Contacts from Vista Home Premium 64-bit

  Trying to export my contacts from Windows Mail.  The instructions read "click on"windows contacts", then click"export"on the"toolbar.""  When I click on "windows contacts", I don't see 'export' in the toolbar, only "Edition, file, view, tools and help."  Are there different instructions for the version of Windows Vista Home Premium 64-bit?  If so, how do I export my contacts?

  http://www.recipester.org/recipe:Import_and_export_contacts_in_Windows_Mail_28756456

  Read the 2nd half of the above tutorial / pictorial step 5.

  See you soon. Mick Murphy - Microsoft partner

• It keeps rejecting my product key! (upgrade from Vista home premium 32 bit to Windows 7 64-bit).

  Thus, as the title past Windows is not accepting my new Windows 7 product key. I bought the product key and copy (at the same time of course) of my college, as I am a computer SCIENCE student is trying to catch up. Anyway, if I get home and install my new Windows 7 SP1 (whatever that means) through "BIOS" because I've been upgraded to Vista Home premium 32-bit. When he asked my product key during the installation/installation that it wasn't working, I thought although it may need some updates or something. So I click on ignore and continue the installation. Then after all updates etc... I then try again the product key, and of course it does not work as most of the new technologies in this House works the first time. Please help, it's that some of become a nuisance. Thanks for reading :)

  Make sure you have all the numbers and the correct letter (example: number 8 and letter B can almost look the same.) The letter Q may resemble a 0 or O)

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Can I switch from Vista Home Premium 32 bit to Windows 7 Professional 64-bit?

  I wanted to basically triple - check the compatibility of my laptop current in what concerns the upgrade from Vista to Windows 7.

  As a student, I can get windows 7 professional 64 bit for £30. Their moment I'm running a 32-bit version of vista Home premium, and I wanted to confirm my laptop is up to running a 64-bit operating system, and that the upgrade from a 32-bit version of Vista to a 64-bit Windows 7 version is also possible.

  I ran the Windows 7 Upgrade Advisor, and it is said that everything should be correct regarding my hardware specifications.

  The results of the 64-bit Upgrade Advisor version:

  -"Your graphics card supports Aero de Windows interface.
  -Processor: 2.1 GHz
  -3.0 GB of RAM (I know it's 4 GB but 32-bit vista can not handle the truth)
  -80.7 GB free on C:

  The consultant warn me that I'll have to do a clean install, rather than an upgrade. I'm not worried about it, I can back up my files to an external hard drive.

  What I want to know is, I will certainly be able to upgrade Vista Home Premium 32 bit to Windows 7 Professional 64-bit, with the upgrade kit here http://store.digitalriver.com/servlet/ControllerServlet?Action=DisplayHomePage&Locale=en_GB&SiteID=msshgb at the bottom of the page?

  Thanks for your help.

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Upgrade paths:
  When important changes to your computer, for example an upgrade, it is always recommended that you back up your system before installing a new version of Windows. In your case, you can upgrade to Windows 7 depending on the edition and the architecture of Windows Vista, you have installed. If you are running a 32-bit version of Vista and upgrade to a 64-bit (Windows 7 edition) version, you'll have a pure make install, it is the opposite case.

  If you are using Windows Vista Home Basic or Premium consumer editions, you can only upgrade to Windows 7 Home Premium or Ultimate. Also, you can make the downgrades, which means, if you are running Windows Vista Ultimate Edition now, you cannot downgrade to Windows 7 Home Premium. You perform logical upgrades:

  Windows Vista Home Basic > Windows 7 Home Basic, Premium or Ultimate
  Windows Vista Edition Home Premium > Windows 7 Home Premium or Ultimate
  Windows Vista Business > Windows 7 Professional, enterprise or ultimate edition
  Windows Vista Business > Windows 7 Enterprise
  Windows Vista Ultimate > Windows 7 Ultimate. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• sfc/scannow foud the corrupted files after upgrade from Vista Home Premium 32 bit

  Hello

  It is an event that I went through:

  (1) recently I received a bunch of updates to Vista Home Premium 32 bit, after I did the update I decided to perform sfc/scannow task and this is the error message I got the "Windows Resource Protection found corrupt files and managed to fix them." Details are provided in the CBS.log windir\logs\CBS.log newspaper. For example c:\windows\logs\CBS\CBS.log

  Repair of system files change will take effect after the next reboot.

  (2) so I did restart and then try to run the sfc/scannow task once again, but I still got the same message I described in step 1 again. So basically sfc/scannow function did not repair the corrupted files.

  (3) the next step, I decided to perform a repair Installation of visa which took me 10 hours to complete the task, once the task of upgrading of repair has been made and before the windows update, I ran sfc/scannow task and this time he finds any corrupted files, but after I updated windows sfc/scannow result was the same as step 1.

  It is obvious to me that one of the updates of the origin of this problem, but find it me hard to pinpoint that one. So I am writing this e-mail to help and I hope that the problem will soon be solved. Please let me know if you need me to submit the CBS.log file for you to review thanks in advance.

  Kind regards

  Jdec9

  Hello

  Sorry to hear that you are facing a problem due to the update of Windows. I'll certainly do my best and get the issue resolved.

  I suggest you to view update history to see which update might be causing the problem.

  (a) open Windows Update by clicking Start , all programs, and then Windows Update.

  (b) in the left pane, click view update history.

  (c) to display more information about an update, double-click it.

  Once you know Update KB number, provide us with the same for later analysis. You can also try the steps in the article and see if it helps.

  You can also download the files of cbs to Skydrive.

  Use SkyDrive download collected files and post screen shot/image

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• How can I switch from Vista Home Premium to Vista Ultimate?

  How can I change my operating system of windows vist Home premium to windows vista ultimate

  Hello Johnnie,

  As Palcouk said, you need to buy Windows Vista Ultimate Edition.

  You can perform an Installation of Windows Vista Edition upgrade Home Premium to Windows Vista Ultimate Edition.

  You can upgrade to Windows 7 Ultimate a higher edition of Windows.

  http://Windows.Microsoft.com/en-us/Windows-Vista/upgrade-to-another-edition-of-Windows-Vista

  Upgrade to another edition of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/upgrade-to-another-edition-of-Windows-Vista

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Anyone could upgrade from Vista Home Premium 64 - Bit, Vista Business or Vista Ultimate on their laptop, HP Pavilion DV7-1285DX?

  I tried to upgrade my HP Pavilion DV7-1285DX which came preloaded with Vista Home Premium, Vista Business or Vista Ultimate.  I installed SP2 on the portable computer, according to the instructions of Vista professional in order to upgrade to that.  I'll try the upgrade and Vista Business that I can not upgrade to this version - upgrade to ultimate.  I get the game ultimate disc and IT is said that the UPGRADE is DISABLED!  I got that with businesses for.  I'm running 64 Bit software trying to upgrade to same, just better o/s so I can join my domain.  Help, please!

  I tried to upgrade my HP Pavilion DV7-1285DX which came preloaded with Vista Home Premium, Vista Business or Vista Ultimate.  I installed SP2 on the portable computer, according to the instructions of Vista professional in order to upgrade to that.  I'll try the upgrade and Vista Business that I can not upgrade to this version - upgrade to ultimate.  I get the game ultimate disc and IT is said that the UPGRADE is DISABLED!  I got that with businesses for.  I'm running 64 Bit software trying to upgrade to same, just better o/s so I can join my domain.  Help, please!

  Hey Wyz Azz

  Vista home premium to vista Professional is NOT an upgrade path

  You must do a fresh install with the help of a full vista Enterprise license

  With the 64-bit of Windows Vista editions, things are as clear as possible. You can upgrade:
  -Home Basic, Home Premium and Ultimate.
  -Home Premium to Ultimate.
  -Business to ultimate.

  for your vista upgrade family problems premium if the ultimate disc doesn't have a sp2 already as part of it uninstall sp2 from the installed OS family premium to ultimate upgrade then reinstall sp2

  Walter, the time zone traveller

• How can I move from Vista Home Premium to Windows 7 hp? Is it better to buy the software disk or download the software?

  My Hp Pavilion Elite M9340F desktop PC was the best computer I've ever owned five computers desktop and portable three. Not only use the personal media drive Bay and two bays of lightscribe disc, I upgraded the video card and the power supply because I run also three external hard drives more (which actually a total of six hard drives run continuously).  I want to spend all or just possibly the main hard drive and Windows 7 Home Premium personal multimedia hard disk.  Is it better to buy the disc or download the software?  In addition, how is it difficult to make the switch?  Even with good backups, I have heard horror stories of losing part or all of the files or have things so scrambled that it is almost impossible to find what you are looking for.  ANY help will be greatly appreciated.  Thank you, Mr. w. Dillon * address email is removed from the privacy *.

  Hello

  It's always a good idea to have a paper copy of a disc (for resettlement and repairs).

  And Yes, backup all your data as 'can' happen during an upgrade that is supposed to be easy.

  This is a very good guide for what you want to do:

  Make sure you go from Vista 32 bit to Windows 7 32 bit to be able to do an upgrade.

  «How To Upgrade from Vista to Windows 7 Edition Home Premium»

  http://www.howtogeek.com/HOWTO/6892/how-to-perform-an-upgrade-from-Vista-to-Windows-7/

  And follow these steps first:

  Go to the HP website and see if Windows 7 drivers are available for your make and model computer / laptop.

  http://WWW8.HP.com/us/en/support-drivers.html

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  For other questions about installing Windows 7, there is a Forum specifically for that because it is the Forum of Installation of Vista, you're in.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

  See you soon.

• Impossible to go from Vista Home Premium 32-bit for Windows 7 Ultimate 32 bit

  I ran all the checks until I bought my upgrade from Amazon and should have been able to upgrade. I even added RAM memory while I have 3 GB of RAM. I put in the disc of Windows 7 Ultimate and it starts but just goes to "save temporary files" and stays there. It is not go further. I got on the phone twice with Microsoft technology and I did everything that they told me nothing does not. They tell me that I have to do a "clean" installation Why Microsoft cannot fix this problem? Now I have to return the disks to upgrade and install pay $100.00 more for the own. What a pain. Any ideas before returning the updated version?

  Tip, you can clean installs the with the upgrade disk.

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

• How to install Windows Vista Home Premium 64-bit?

  Hello! Can someone tell me how can I make Windows Vista Home Premium 32-bit to 64-bit?

  Here's my question: -.

  1. I bought a version of Windows Vista Edition retail family Premium, the package has only the 32-bit support (DVD). I found a few website say that the product key for the retail version of Windows is for 32-bit and 64-bit, as long as we use 32 - bit or 64 - bit on a single computer at a time. If I'm wrong, anyone could answer my question?

  2. now, I plan to move from 32 bit to 64 bit, my problem is that the version sold at retail of Windows that I purchased only contain 32-bit media:-

  (a) is there a way I could install the 64-bit Windows?

  (b) is it possible I could get 64-bit support?

  (c) could I use media in Windows Vista Home Premium 64-bit retail a friend to install on my computer? And after installation, I can activate Windows with my product key?

  Looking forward to the responses, thank you.

  Do you a clean install from 32 bit to 64 bit.

  http://www.Microsoft.com/windowsvista/1033/ordermedia/default.mspx

  Link above is how you get 64 bit DVD, if you have a retail license.

  You can use any Microsoft Vista 64-bit DVD and use your 32 bit key as you say it's Vista Retail

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon...

  Mick Murphy - Microsoft partner

• Help! How can custom installation of Windows 7 from Vista Home Premium, I save my program files? Such as Microsoft Office, McAfee Internet Security etc?

  Hello
  Having some difficulty understanding what it is I should do before installing a new upgrade of windows 7. I have the disk to upgrade, but discovered only today I now have to perform a customized installation because I'm upgrading from vista home premium to windows 7 Professional.

  So, this means that all program etc. files must also be backed up as well as the usual save multimedia files, photos, etc..

  HOW HOW HOW do I save my program files for example office microsoft, mcafee internet sicurity? Is it as simple as the copy on a CD/DVD-R?

  IM so confused, please help!

  You cannot save programs and then copy them to another system.

  You must reinstall them from the original media. Make sure you have all the license keys you need to reinstall before you start.

• Not to say could not upgrade from Vista Home Premium to Windows 7 Professional

  I pre-ordered Windows 7 months with no indication that I couldn't switch from Vista Home Premium to Windows 7 Professional without performing a new installation.  Now I learn that I have to re - install all THE programs, once I have perform this upgrade / 'clean install '.  All the criticism of Windows Vista pales in comparison to my irritation at says this news AFTER the purchase, and not before.  Failure of the installation of the Windows 7 Upgrade Advisor to note any problem.  All previous Windows upgrades went flawless.  Needless to say I am extremely disappointed by this turn events and we hope that Microsoft will improve its pre-purchase counseling in the future.

  I guess I have no choice now but to do a clean install of Windows 7 and then reinstall on my computer that will put me out of use for a long period of time?  I backed up the entire hard drive before trying to install, but I doubt I can get by simply restoring this backup.  Is this correct?

  Hi pwcushman,

  Thank you for visiting Microsoft Answers.

  Windows Live OneCare Backup works in stages. You start by setting up how you want Backup to run and save the configuration. The backup will then run according to schedule and backup your files according to the saved configuration. You can make changes to this list or add other files and folders.

  You can restore all files and folders, but you will have to reinstall all the programs.

  Check this link for more information:

  http://OneCare.live.com/standard/en-us/prodinfo/backuprestoredetails.htm

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.